blob: 33e648808117770949f81bd72e4b7fe1479705d4 [file] [log] [blame]
What: /sys/class/backlight/<backlight>/<ambient light zone>_max
What: /sys/class/backlight/<backlight>/l1_daylight_max
What: /sys/class/backlight/<backlight>/l2_bright_max
What: /sys/class/backlight/<backlight>/l3_office_max
What: /sys/class/backlight/<backlight>/l4_indoor_max
What: /sys/class/backlight/<backlight>/l5_dark_max
Date: May 2011
KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the maximum brightness for <ambient light zone>
on this <backlight>. Values are between 0 and 127. This file
will also show the brightness level stored for this
<ambient light zone>.
What: /sys/class/backlight/<backlight>/<ambient light zone>_dim
What: /sys/class/backlight/<backlight>/l2_bright_dim
What: /sys/class/backlight/<backlight>/l3_office_dim
What: /sys/class/backlight/<backlight>/l4_indoor_dim
What: /sys/class/backlight/<backlight>/l5_dark_dim
Date: May 2011
KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Control the dim brightness for <ambient light zone>
on this <backlight>. Values are between 0 and 127, typically
set to 0. Full off when the backlight is disabled.
This file will also show the dim brightness level stored for
this <ambient light zone>.
What: /sys/class/backlight/<backlight>/ambient_light_level
Date: May 2011
KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get conversion value of the light sensor.
This value is updated every 80 ms (when the light sensor
is enabled). Returns integer between 0 (dark) and
8000 (max ambient brightness)
What: /sys/class/backlight/<backlight>/ambient_light_zone
Date: May 2011
KernelVersion: 3.0
Contact: device-drivers-devel@blackfin.uclinux.org
Description:
Get/Set current ambient light zone. Reading returns
integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark).
Writing a value between 1..5 forces the backlight controller
to enter the corresponding ambient light zone.
Writing 0 returns to normal/automatic ambient light level
operation. The ambient light sensing feature on these devices
is an extension to the API documented in
Documentation/ABI/stable/sysfs-class-backlight.
It can be enabled by writing the value stored in
/sys/class/backlight/<backlight>/max_brightness to
/sys/class/backlight/<backlight>/brightness.