| What: /sys/devices/platform/eeepc/disp | |
| Date: May 2008 | |
| KernelVersion: 2.6.26 | |
| Contact: "Corentin Chary" <corentincj@iksaif.net> | |
| Description: | |
| This file allows display switching. | |
| - 1 = LCD | |
| - 2 = CRT | |
| - 3 = LCD+CRT | |
| If you run X11, you should use xrandr instead. | |
| What: /sys/devices/platform/eeepc/camera | |
| Date: May 2008 | |
| KernelVersion: 2.6.26 | |
| Contact: "Corentin Chary" <corentincj@iksaif.net> | |
| Description: | |
| Control the camera. 1 means on, 0 means off. | |
| What: /sys/devices/platform/eeepc/cardr | |
| Date: May 2008 | |
| KernelVersion: 2.6.26 | |
| Contact: "Corentin Chary" <corentincj@iksaif.net> | |
| Description: | |
| Control the card reader. 1 means on, 0 means off. | |
| What: /sys/devices/platform/eeepc/cpufv | |
| Date: Jun 2009 | |
| KernelVersion: 2.6.31 | |
| Contact: "Corentin Chary" <corentincj@iksaif.net> | |
| Description: | |
| Change CPU clock configuration. | |
| On the Eee PC 1000H there are three available clock configuration: | |
| * 0 -> Super Performance Mode | |
| * 1 -> High Performance Mode | |
| * 2 -> Power Saving Mode | |
| On Eee PC 701 there is only 2 available clock configurations. | |
| Available configuration are listed in available_cpufv file. | |
| Reading this file will show the raw hexadecimal value which | |
| is defined as follow: | |
| | 8 bit | 8 bit | | |
| | `---- Current mode | |
| `------------ Availables modes | |
| For example, 0x301 means: mode 1 selected, 3 available modes. | |
| What: /sys/devices/platform/eeepc/available_cpufv | |
| Date: Jun 2009 | |
| KernelVersion: 2.6.31 | |
| Contact: "Corentin Chary" <corentincj@iksaif.net> | |
| Description: | |
| List available cpufv modes. |