Google Git
Sign in
nest-open-source / nest-learning-thermostat / 5.1.6 / lsof / bd2c74a45d5846c4815318e99c21687492c93197 / . / lsof_4.85 / lsof_4.85_src / lib / regex.c
blob: 88e959d00fddce9c576aaed3b77cb5a7cccaa676 [file] [log] [blame]
/*
* regex.c -- POSIX-conformant regular expression function set for the lsof
* library
*
* This file is used when the UNIX dialect does not have a POSIX-conformant
* regular expression function set. In that case USE_LIB_REGEX is defined.
*
* V. Abell <abe@purdue.edu>
* Purdue University Computing Center
*/
/*
* Copyright 2000 Purdue Research Foundation, West Lafayette, Indiana
* 47907. All rights reserved.
*
* Written by Victor A. Abell
*
* This software is not subject to any license of the American Telephone
* and Telegraph Company or the Regents of the University of California.
*
* This software has been adapted from snprintf.c in sendmail 8.9.3. It
* is subject to the sendmail copyright statements listed below, and the
* sendmail licensing terms stated in the sendmail LICENSE file comment
* section of this file.
*
* Permission is granted to anyone to use this software for any purpose on
* any computer system, and to alter it and redistribute it freely, subject
* to the following restrictions:
*
* 1. Neither the authors nor Purdue University are responsible for any
* consequences of the use of this software.
*
* 2. The origin of this software must not be misrepresented, either by
* explicit claim or by omission. Credit to the authors and Purdue
* University must appear in documentation and sources.
*
* 3. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
*
* 4. This notice may not be removed or altered.
*/
#include "../machine.h"
#ifdef USE_LIB_REGEX
/*
* This file comes from GLIBC 2.2. It is used when the UNIX dialect does not
* have a POSIX-conformant regular expression function set. In that case
* USE_LIB_REGEX is defined.
*/
/* Extended regular expression matching and search library,
version 0.12.
(Implements POSIX draft P1003.2/D11.2, except for some of the
internationalization features.)
Copyright (C) 1993-1999, 2000 Free Software Foundation, Inc.
The GNU C Library is free software; you can redistribute it and/or
modify it under the terms of the GNU Library General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
The GNU C Library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Library General Public License for more details.
You should have received a copy of the GNU Library General Public
License along with the GNU C Library; see the file COPYING.LIB. If not,
write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* AIX requires this to be the first thing in the file. */
#if defined _AIX && !defined REGEX_MALLOC
#pragma alloca
#endif
#undef _GNU_SOURCE
#define _GNU_SOURCE
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
#ifndef PARAMS
# if defined __GNUC__ || (defined __STDC__ && __STDC__)
# define PARAMS(args) args
# else
# define PARAMS(args) ()
# endif /* GCC. */
#endif /* Not PARAMS. */
#if defined STDC_HEADERS && !defined emacs
# include <stddef.h>
#else
/* We need this for `regex.h', and perhaps for the Emacs include files. */
# include <sys/types.h>
#endif
#define WIDE_CHAR_SUPPORT (HAVE_WCTYPE_H && HAVE_WCHAR_H && HAVE_BTOWC)
/* For platform which support the ISO C amendement 1 functionality we
support user defined character classes. */
#if defined _LIBC || WIDE_CHAR_SUPPORT
/* Solaris 2.5 has a bug: <wchar.h> must be included before <wctype.h>. */
# include <wchar.h>
# include <wctype.h>
#endif
#ifdef _LIBC
/* We have to keep the namespace clean. */
# define regfree(preg) __regfree (preg)
# define regexec(pr, st, nm, pm, ef) __regexec (pr, st, nm, pm, ef)
# define regcomp(preg, pattern, cflags) __regcomp (preg, pattern, cflags)
# define regerror(errcode, preg, errbuf, errbuf_size) \
__regerror(errcode, preg, errbuf, errbuf_size)
# define re_set_registers(bu, re, nu, st, en) \
__re_set_registers (bu, re, nu, st, en)
# define re_match_2(bufp, string1, size1, string2, size2, pos, regs, stop) \
__re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
# define re_match(bufp, string, size, pos, regs) \
__re_match (bufp, string, size, pos, regs)
# define re_search(bufp, string, size, startpos, range, regs) \
__re_search (bufp, string, size, startpos, range, regs)
# define re_compile_pattern(pattern, length, bufp) \
__re_compile_pattern (pattern, length, bufp)
# define re_set_syntax(syntax) __re_set_syntax (syntax)
# define re_search_2(bufp, st1, s1, st2, s2, startpos, range, regs, stop) \
__re_search_2 (bufp, st1, s1, st2, s2, startpos, range, regs, stop)
# define re_compile_fastmap(bufp) __re_compile_fastmap (bufp)
# define btowc __btowc
/* We are also using some library internals. */
# include <locale/localeinfo.h>
# include <locale/elem-hash.h>
# include <langinfo.h>
#endif
/* This is for other GNU distributions with internationalized messages. */
#if HAVE_LIBINTL_H || defined _LIBC
# include <libintl.h>
# ifdef _LIBC
# undef gettext
# define gettext(msgid) __dcgettext ("libc", msgid, LC_MESSAGES)
# endif
#else
# define gettext(msgid) (msgid)
#endif
#ifndef gettext_noop
/* This define is so xgettext can find the internationalizable
strings. */
# define gettext_noop(String) String
#endif
/* The `emacs' switch turns on certain matching commands
that make sense only in Emacs. */
#ifdef emacs
# include "lisp.h"
# include "buffer.h"
# include "syntax.h"
#else /* not emacs */
/* If we are not linking with Emacs proper,
we can't use the relocating allocator
even if config.h says that we can. */
# undef REL_ALLOC
# if defined STDC_HEADERS || defined _LIBC
# include <stdlib.h>
# else
char *malloc ();
char *realloc ();
# endif
/* When used in Emacs's lib-src, we need to get bzero and bcopy somehow.
If nothing else has been done, use the method below. */
# ifdef INHIBIT_STRING_HEADER
# if !(defined HAVE_BZERO && defined HAVE_BCOPY)
# if !defined bzero && !defined bcopy
# undef INHIBIT_STRING_HEADER
# endif
# endif
# endif
/* This is the normal way of making sure we have a bcopy and a bzero.
This is used in most programs--a few other programs avoid this
by defining INHIBIT_STRING_HEADER. */
# ifndef INHIBIT_STRING_HEADER
# if defined HAVE_STRING_H || defined STDC_HEADERS || defined _LIBC
# include <string.h>
# ifndef bzero
# ifndef _LIBC
# define bzero(s, n) (memset (s, '\0', n), (s))
# else
# define bzero(s, n) __bzero (s, n)
# endif
# endif
# else
# include <strings.h>
# ifndef memcmp
# define memcmp(s1, s2, n) bcmp (s1, s2, n)
# endif
# ifndef memcpy
# define memcpy(d, s, n) (bcopy (s, d, n), (d))
# endif
# endif
# endif
/* Define the syntax stuff for \<, \>, etc. */
/* This must be nonzero for the wordchar and notwordchar pattern
commands in re_match_2. */
# ifndef Sword
# define Sword 1
# endif
# ifdef SWITCH_ENUM_BUG
# define SWITCH_ENUM_CAST(x) ((int)(x))
# else
# define SWITCH_ENUM_CAST(x) (x)
# endif
#endif /* not emacs */
#if defined _LIBC || HAVE_LIMITS_H
# include <limits.h>
#endif
#ifndef MB_LEN_MAX
# define MB_LEN_MAX 1
#endif
/* Get the interface, including the syntax bits. */
/* Disabled by V. Abell on January 29, 2001: #include <regex.h> */
#include "../regex.h"
/* isalpha etc. are used for the character classes. */
#include <ctype.h>
/* Jim Meyering writes:
"... Some ctype macros are valid only for character codes that
isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
using /bin/cc or gcc but without giving an ansi option). So, all
ctype uses should be through macros like ISPRINT... If
STDC_HEADERS is defined, then autoconf has verified that the ctype
macros don't need to be guarded with references to isascii. ...
Defining isascii to 1 should let any compiler worth its salt
eliminate the && through constant folding."
Solaris defines some of these symbols so we must undefine them first. */
#undef ISASCII
#if defined STDC_HEADERS || (!defined isascii && !defined HAVE_ISASCII)
# define ISASCII(c) 1
#else
# define ISASCII(c) isascii(c)
#endif
#ifdef isblank
# define ISBLANK(c) (ISASCII (c) && isblank (c))
#else
# define ISBLANK(c) ((c) == ' ' || (c) == '\t')
#endif
#ifdef isgraph
# define ISGRAPH(c) (ISASCII (c) && isgraph (c))
#else
# define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
#endif
#undef ISPRINT
#define ISPRINT(c) (ISASCII (c) && isprint (c))
#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
#define ISALNUM(c) (ISASCII (c) && isalnum (c))
#define ISALPHA(c) (ISASCII (c) && isalpha (c))
#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
#define ISLOWER(c) (ISASCII (c) && islower (c))
#define ISPUNCT(c) (ISASCII (c) && ispunct (c))
#define ISSPACE(c) (ISASCII (c) && isspace (c))
#define ISUPPER(c) (ISASCII (c) && isupper (c))
#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
#ifdef _tolower
# define TOLOWER(c) _tolower(c)
#else
# define TOLOWER(c) tolower(c)
#endif
#ifndef NULL
# define NULL (void *)0
#endif
/* We remove any previous definition of `SIGN_EXTEND_CHAR',
since ours (we hope) works properly with all combinations of
machines, compilers, `char' and `unsigned char' argument types.
(Per Bothner suggested the basic approach.) */
#undef SIGN_EXTEND_CHAR
#if __STDC__
# define SIGN_EXTEND_CHAR(c) ((signed char) (c))
#else /* not __STDC__ */
/* As in Harbison and Steele. */
# define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
#endif
#ifndef emacs
/* How many characters in the character set. */
# define CHAR_SET_SIZE 256
# ifdef SYNTAX_TABLE
extern char *re_syntax_table;
# else /* not SYNTAX_TABLE */
static char re_syntax_table[CHAR_SET_SIZE];
static void
init_syntax_once ()
{
register int c;
static int done = 0;
if (done)
return;
bzero (re_syntax_table, sizeof re_syntax_table);
for (c = 0; c < CHAR_SET_SIZE; ++c)
if (ISALNUM (c))
re_syntax_table[c] = Sword;
re_syntax_table['_'] = Sword;
done = 1;
}
# endif /* not SYNTAX_TABLE */
# define SYNTAX(c) re_syntax_table[(unsigned char) (c)]
#endif /* emacs */
/* Should we use malloc or alloca? If REGEX_MALLOC is not defined, we
use `alloca' instead of `malloc'. This is because using malloc in
re_search* or re_match* could cause memory leaks when C-g is used in
Emacs; also, malloc is slower and causes storage fragmentation. On
the other hand, malloc is more portable, and easier to debug.
Because we sometimes use alloca, some routines have to be macros,
not functions -- `alloca'-allocated space disappears at the end of the
function it is called in. */
#ifdef REGEX_MALLOC
# define REGEX_ALLOCATE malloc
# define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
# define REGEX_FREE free
#else /* not REGEX_MALLOC */
/* Emacs already defines alloca, sometimes. */
# ifndef alloca
/* Make alloca work the best possible way. */
# ifdef __GNUC__
# define alloca __builtin_alloca
# else /* not __GNUC__ */
# if HAVE_ALLOCA_H
# include <alloca.h>
# endif /* HAVE_ALLOCA_H */
# endif /* not __GNUC__ */
# endif /* not alloca */
# define REGEX_ALLOCATE alloca
/* Assumes a `char *destination' variable. */
# define REGEX_REALLOCATE(source, osize, nsize) \
(destination = (char *) alloca (nsize), \
memcpy (destination, source, osize))
/* No need to do anything to free, after alloca. */
# define REGEX_FREE(arg) ((void)0) /* Do nothing! But inhibit gcc warning. */
#endif /* not REGEX_MALLOC */
/* Define how to allocate the failure stack. */
#if defined REL_ALLOC && defined REGEX_MALLOC
# define REGEX_ALLOCATE_STACK(size) \
r_alloc (&failure_stack_ptr, (size))
# define REGEX_REALLOCATE_STACK(source, osize, nsize) \
r_re_alloc (&failure_stack_ptr, (nsize))
# define REGEX_FREE_STACK(ptr) \
r_alloc_free (&failure_stack_ptr)
#else /* not using relocating allocator */
# ifdef REGEX_MALLOC
# define REGEX_ALLOCATE_STACK malloc
# define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
# define REGEX_FREE_STACK free
# else /* not REGEX_MALLOC */
# define REGEX_ALLOCATE_STACK alloca
# define REGEX_REALLOCATE_STACK(source, osize, nsize) \
REGEX_REALLOCATE (source, osize, nsize)
/* No need to explicitly free anything. */
# define REGEX_FREE_STACK(arg)
# endif /* not REGEX_MALLOC */
#endif /* not using relocating allocator */
/* True if `size1' is non-NULL and PTR is pointing anywhere inside
`string1' or just past its end. This works if PTR is NULL, which is
a good thing. */
#define FIRST_STRING_P(ptr) \
(size1 && string1 <= (ptr) && (ptr) <= string1 + size1)
/* (Re)Allocate N items of type T using malloc, or fail. */
#define TALLOC(n, t) ((t *) malloc ((n) * sizeof (t)))
#define RETALLOC(addr, n, t) ((addr) = (t *) realloc (addr, (n) * sizeof (t)))
#define RETALLOC_IF(addr, n, t) \
if (addr) RETALLOC((addr), (n), t); else (addr) = TALLOC ((n), t)
#define REGEX_TALLOC(n, t) ((t *) REGEX_ALLOCATE ((n) * sizeof (t)))
#define BYTEWIDTH 8 /* In bits. */
#define STREQ(s1, s2) ((strcmp (s1, s2) == 0))
#undef MAX
#undef MIN
#define MAX(a, b) ((a) > (b) ? (a) : (b))
#define MIN(a, b) ((a) < (b) ? (a) : (b))
typedef char boolean;
#define false 0
#define true 1
static int re_match_2_internal PARAMS ((struct re_pattern_buffer *bufp,
const char *string1, int size1,
const char *string2, int size2,
int pos,
struct re_registers *regs,
int stop));
/* These are the command codes that appear in compiled regular
expressions. Some opcodes are followed by argument bytes. A
command code can specify any interpretation whatsoever for its
arguments. Zero bytes may appear in the compiled regular expression. */
typedef enum
{
no_op = 0,
/* Succeed right away--no more backtracking. */
succeed,
/* Followed by one byte giving n, then by n literal bytes. */
exactn,
/* Matches any (more or less) character. */
anychar,
/* Matches any one char belonging to specified set. First
following byte is number of bitmap bytes. Then come bytes
for a bitmap saying which chars are in. Bits in each byte
are ordered low-bit-first. A character is in the set if its
bit is 1. A character too large to have a bit in the map is
automatically not in the set. */
charset,
/* Same parameters as charset, but match any character that is
not one of those specified. */
charset_not,
/* Start remembering the text that is matched, for storing in a
register. Followed by one byte with the register number, in
the range 0 to one less than the pattern buffer's re_nsub
field. Then followed by one byte with the number of groups
inner to this one. (This last has to be part of the
start_memory only because we need it in the on_failure_jump
of re_match_2.) */
start_memory,
/* Stop remembering the text that is matched and store it in a
memory register. Followed by one byte with the register
number, in the range 0 to one less than `re_nsub' in the
pattern buffer, and one byte with the number of inner groups,
just like `start_memory'. (We need the number of inner
groups here because we don't have any easy way of finding the
corresponding start_memory when we're at a stop_memory.) */
stop_memory,
/* Match a duplicate of something remembered. Followed by one
byte containing the register number. */
duplicate,
/* Fail unless at beginning of line. */
begline,
/* Fail unless at end of line. */
endline,
/* Succeeds if at beginning of buffer (if emacs) or at beginning
of string to be matched (if not). */
begbuf,
/* Analogously, for end of buffer/string. */
endbuf,
/* Followed by two byte relative address to which to jump. */
jump,
/* Same as jump, but marks the end of an alternative. */
jump_past_alt,
/* Followed by two-byte relative address of place to resume at
in case of failure. */
on_failure_jump,
/* Like on_failure_jump, but pushes a placeholder instead of the
current string position when executed. */
on_failure_keep_string_jump,
/* Throw away latest failure point and then jump to following
two-byte relative address. */
pop_failure_jump,
/* Change to pop_failure_jump if know won't have to backtrack to
match; otherwise change to jump. This is used to jump
back to the beginning of a repeat. If what follows this jump
clearly won't match what the repeat does, such that we can be
sure that there is no use backtracking out of repetitions
already matched, then we change it to a pop_failure_jump.
Followed by two-byte address. */
maybe_pop_jump,
/* Jump to following two-byte address, and push a dummy failure
point. This failure point will be thrown away if an attempt
is made to use it for a failure. A `+' construct makes this
before the first repeat. Also used as an intermediary kind
of jump when compiling an alternative. */
dummy_failure_jump,
/* Push a dummy failure point and continue. Used at the end of
alternatives. */
push_dummy_failure,
/* Followed by two-byte relative address and two-byte number n.
After matching N times, jump to the address upon failure. */
succeed_n,
/* Followed by two-byte relative address, and two-byte number n.
Jump to the address N times, then fail. */
jump_n,
/* Set the following two-byte relative address to the
subsequent two-byte number. The address *includes* the two
bytes of number. */
set_number_at,
wordchar, /* Matches any word-constituent character. */
notwordchar, /* Matches any char that is not a word-constituent. */
wordbeg, /* Succeeds if at word beginning. */
wordend, /* Succeeds if at word end. */
wordbound, /* Succeeds if at a word boundary. */
notwordbound /* Succeeds if not at a word boundary. */
#ifdef emacs
,before_dot, /* Succeeds if before point. */
at_dot, /* Succeeds if at point. */
after_dot, /* Succeeds if after point. */
/* Matches any character whose syntax is specified. Followed by
a byte which contains a syntax code, e.g., Sword. */
syntaxspec,
/* Matches any character whose syntax is not that specified. */
notsyntaxspec
#endif /* emacs */
} re_opcode_t;
/* Common operations on the compiled pattern. */
/* Store NUMBER in two contiguous bytes starting at DESTINATION. */
#define STORE_NUMBER(destination, number) \
do { \
(destination)[0] = (number) & 0377; \
(destination)[1] = (number) >> 8; \
} while (0)
/* Same as STORE_NUMBER, except increment DESTINATION to
the byte after where the number is stored. Therefore, DESTINATION
must be an lvalue. */
#define STORE_NUMBER_AND_INCR(destination, number) \
do { \
STORE_NUMBER (destination, number); \
(destination) += 2; \
} while (0)
/* Put into DESTINATION a number stored in two contiguous bytes starting
at SOURCE. */
#define EXTRACT_NUMBER(destination, source) \
do { \
(destination) = *(source) & 0377; \
(destination) += SIGN_EXTEND_CHAR (*((source) + 1)) << 8; \
} while (0)
#ifdef DEBUG
static void extract_number _RE_ARGS ((int *dest, unsigned char *source));
static void
extract_number (dest, source)
int *dest;
unsigned char *source;
{
int temp = SIGN_EXTEND_CHAR (*(source + 1));
*dest = *source & 0377;
*dest += temp << 8;
}
# ifndef EXTRACT_MACROS /* To debug the macros. */
# undef EXTRACT_NUMBER
# define EXTRACT_NUMBER(dest, src) extract_number (&dest, src)
# endif /* not EXTRACT_MACROS */
#endif /* DEBUG */
/* Same as EXTRACT_NUMBER, except increment SOURCE to after the number.
SOURCE must be an lvalue. */
#define EXTRACT_NUMBER_AND_INCR(destination, source) \
do { \
EXTRACT_NUMBER (destination, source); \
(source) += 2; \
} while (0)
#ifdef DEBUG
static void extract_number_and_incr _RE_ARGS ((int *destination,
unsigned char **source));
static void
extract_number_and_incr (destination, source)
int *destination;
unsigned char **source;
{
extract_number (destination, *source);
*source += 2;
}
# ifndef EXTRACT_MACROS
# undef EXTRACT_NUMBER_AND_INCR
# define EXTRACT_NUMBER_AND_INCR(dest, src) \
extract_number_and_incr (&dest, &src)
# endif /* not EXTRACT_MACROS */
#endif /* DEBUG */
/* If DEBUG is defined, Regex prints many voluminous messages about what
it is doing (if the variable `debug' is nonzero). If linked with the
main program in `iregex.c', you can enter patterns and strings
interactively. And if linked with the main program in `main.c' and
the other test files, you can run the already-written tests. */
#ifdef DEBUG
/* We use standard I/O for debugging. */
# include <stdio.h>
/* It is useful to test things that ``must'' be true when debugging. */
# include <assert.h>
static int debug;
# define DEBUG_STATEMENT(e) e
# define DEBUG_PRINT1(x) if (debug) printf (x)
# define DEBUG_PRINT2(x1, x2) if (debug) printf (x1, x2)
# define DEBUG_PRINT3(x1, x2, x3) if (debug) printf (x1, x2, x3)
# define DEBUG_PRINT4(x1, x2, x3, x4) if (debug) printf (x1, x2, x3, x4)
# define DEBUG_PRINT_COMPILED_PATTERN(p, s, e) \
if (debug) print_partial_compiled_pattern (s, e)
# define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2) \
if (debug) print_double_string (w, s1, sz1, s2, sz2)
/* Print the fastmap in human-readable form. */
void
print_fastmap (fastmap)
char *fastmap;
{
unsigned was_a_range = 0;
unsigned i = 0;
while (i < (1 << BYTEWIDTH))
{
if (fastmap[i++])
{
was_a_range = 0;
putchar (i - 1);
while (i < (1 << BYTEWIDTH) && fastmap[i])
{
was_a_range = 1;
i++;
}
if (was_a_range)
{
printf ("-");
putchar (i - 1);
}
}
}
putchar ('\n');
}
/* Print a compiled pattern string in human-readable form, starting at
the START pointer into it and ending just before the pointer END. */
void
print_partial_compiled_pattern (start, end)
unsigned char *start;
unsigned char *end;
{
int mcnt, mcnt2;
unsigned char *p1;
unsigned char *p = start;
unsigned char *pend = end;
if (start == NULL)
{
printf ("(null)\n");
return;
}
/* Loop over pattern commands. */
while (p < pend)
{
#ifdef _LIBC
printf ("%t:\t", p - start);
#else
printf ("%ld:\t", (long int) (p - start));
#endif
switch ((re_opcode_t) *p++)
{
case no_op:
printf ("/no_op");
break;
case exactn:
mcnt = *p++;
printf ("/exactn/%d", mcnt);
do
{
putchar ('/');
putchar (*p++);
}
while (--mcnt);
break;
case start_memory:
mcnt = *p++;
printf ("/start_memory/%d/%d", mcnt, *p++);
break;
case stop_memory:
mcnt = *p++;
printf ("/stop_memory/%d/%d", mcnt, *p++);
break;
case duplicate:
printf ("/duplicate/%d", *p++);
break;
case anychar:
printf ("/anychar");
break;
case charset:
case charset_not:
{
register int c, last = -100;
register int in_range = 0;
printf ("/charset [%s",
(re_opcode_t) *(p - 1) == charset_not ? "^" : "");
assert (p + *p < pend);
for (c = 0; c < 256; c++)
if (c / 8 < *p
&& (p[1 + (c/8)] & (1 << (c % 8))))
{
/* Are we starting a range? */
if (last + 1 == c && ! in_range)
{
putchar ('-');
in_range = 1;
}
/* Have we broken a range? */
else if (last + 1 != c && in_range)
{
putchar (last);
in_range = 0;
}
if (! in_range)
putchar (c);
last = c;
}
if (in_range)
putchar (last);
putchar (']');
p += 1 + *p;
}
break;
case begline:
printf ("/begline");
break;
case endline:
printf ("/endline");
break;
case on_failure_jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/on_failure_jump to %t", p + mcnt - start);
#else
printf ("/on_failure_jump to %ld", (long int) (p + mcnt - start));
#endif
break;
case on_failure_keep_string_jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/on_failure_keep_string_jump to %t", p + mcnt - start);
#else
printf ("/on_failure_keep_string_jump to %ld",
(long int) (p + mcnt - start));
#endif
break;
case dummy_failure_jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/dummy_failure_jump to %t", p + mcnt - start);
#else
printf ("/dummy_failure_jump to %ld", (long int) (p + mcnt - start));
#endif
break;
case push_dummy_failure:
printf ("/push_dummy_failure");
break;
case maybe_pop_jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/maybe_pop_jump to %t", p + mcnt - start);
#else
printf ("/maybe_pop_jump to %ld", (long int) (p + mcnt - start));
#endif
break;
case pop_failure_jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/pop_failure_jump to %t", p + mcnt - start);
#else
printf ("/pop_failure_jump to %ld", (long int) (p + mcnt - start));
#endif
break;
case jump_past_alt:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/jump_past_alt to %t", p + mcnt - start);
#else
printf ("/jump_past_alt to %ld", (long int) (p + mcnt - start));
#endif
break;
case jump:
extract_number_and_incr (&mcnt, &p);
#ifdef _LIBC
printf ("/jump to %t", p + mcnt - start);
#else
printf ("/jump to %ld", (long int) (p + mcnt - start));
#endif
break;
case succeed_n:
extract_number_and_incr (&mcnt, &p);
p1 = p + mcnt;
extract_number_and_incr (&mcnt2, &p);
#ifdef _LIBC
printf ("/succeed_n to %t, %d times", p1 - start, mcnt2);
#else
printf ("/succeed_n to %ld, %d times",
(long int) (p1 - start), mcnt2);
#endif
break;
case jump_n:
extract_number_and_incr (&mcnt, &p);
p1 = p + mcnt;
extract_number_and_incr (&mcnt2, &p);
printf ("/jump_n to %d, %d times", p1 - start, mcnt2);
break;
case set_number_at:
extract_number_and_incr (&mcnt, &p);
p1 = p + mcnt;
extract_number_and_incr (&mcnt2, &p);
#ifdef _LIBC
printf ("/set_number_at location %t to %d", p1 - start, mcnt2);
#else
printf ("/set_number_at location %ld to %d",
(long int) (p1 - start), mcnt2);
#endif
break;
case wordbound:
printf ("/wordbound");
break;
case notwordbound:
printf ("/notwordbound");
break;
case wordbeg:
printf ("/wordbeg");
break;
case wordend:
printf ("/wordend");
# ifdef emacs
case before_dot:
printf ("/before_dot");
break;
case at_dot:
printf ("/at_dot");
break;
case after_dot:
printf ("/after_dot");
break;
case syntaxspec:
printf ("/syntaxspec");
mcnt = *p++;
printf ("/%d", mcnt);
break;
case notsyntaxspec:
printf ("/notsyntaxspec");
mcnt = *p++;
printf ("/%d", mcnt);
break;
# endif /* emacs */
case wordchar:
printf ("/wordchar");
break;
case notwordchar:
printf ("/notwordchar");
break;
case begbuf:
printf ("/begbuf");
break;
case endbuf:
printf ("/endbuf");
break;
default:
printf ("?%d", *(p-1));
}
putchar ('\n');
}
#ifdef _LIBC
printf ("%t:\tend of pattern.\n", p - start);
#else
printf ("%ld:\tend of pattern.\n", (long int) (p - start));
#endif
}
void
print_compiled_pattern (bufp)
struct re_pattern_buffer *bufp;
{
unsigned char *buffer = bufp->buffer;
print_partial_compiled_pattern (buffer, buffer + bufp->used);
printf ("%ld bytes used/%ld bytes allocated.\n",
bufp->used, bufp->allocated);
if (bufp->fastmap_accurate && bufp->fastmap)
{
printf ("fastmap: ");
print_fastmap (bufp->fastmap);
}
#ifdef _LIBC
printf ("re_nsub: %Zd\t", bufp->re_nsub);
#else
printf ("re_nsub: %ld\t", (long int) bufp->re_nsub);
#endif
printf ("regs_alloc: %d\t", bufp->regs_allocated);
printf ("can_be_null: %d\t", bufp->can_be_null);
printf ("newline_anchor: %d\n", bufp->newline_anchor);
printf ("no_sub: %d\t", bufp->no_sub);
printf ("not_bol: %d\t", bufp->not_bol);
printf ("not_eol: %d\t", bufp->not_eol);
printf ("syntax: %lx\n", bufp->syntax);
/* Perhaps we should print the translate table? */
}
void
print_double_string (where, string1, size1, string2, size2)
const char *where;
const char *string1;
const char *string2;
int size1;
int size2;
{
int this_char;
if (where == NULL)
printf ("(null)");
else
{
if (FIRST_STRING_P (where))
{
for (this_char = where - string1; this_char < size1; this_char++)
putchar (string1[this_char]);
where = string2;
}
for (this_char = where - string2; this_char < size2; this_char++)
putchar (string2[this_char]);
}
}
void
printchar (c)
int c;
{
putc (c, stderr);
}
#else /* not DEBUG */
# undef assert
# define assert(e)
# define DEBUG_STATEMENT(e)
# define DEBUG_PRINT1(x)
# define DEBUG_PRINT2(x1, x2)
# define DEBUG_PRINT3(x1, x2, x3)
# define DEBUG_PRINT4(x1, x2, x3, x4)
# define DEBUG_PRINT_COMPILED_PATTERN(p, s, e)
# define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
#endif /* not DEBUG */
/* Set by `re_set_syntax' to the current regexp syntax to recognize. Can
also be assigned to arbitrarily: each pattern buffer stores its own
syntax, so it can be changed between regex compilations. */
/* This has no initializer because initialized variables in Emacs
become read-only after dumping. */
reg_syntax_t re_syntax_options;
/* Specify the precise syntax of regexps for compilation. This provides
for compatibility for various utilities which historically have
different, incompatible syntaxes.
The argument SYNTAX is a bit mask comprised of the various bits
defined in regex.h. We return the old syntax. */
reg_syntax_t
re_set_syntax (syntax)
reg_syntax_t syntax;
{
reg_syntax_t ret = re_syntax_options;
re_syntax_options = syntax;
#ifdef DEBUG
if (syntax & RE_DEBUG)
debug = 1;
else if (debug) /* was on but now is not */
debug = 0;
#endif /* DEBUG */
return ret;
}
#ifdef _LIBC
weak_alias (__re_set_syntax, re_set_syntax)
#endif
/* This table gives an error message for each of the error codes listed
in regex.h. Obviously the order here has to be same as there.
POSIX doesn't require that we do anything for REG_NOERROR,
but why not be nice? */
static const char re_error_msgid[] =
{
#define REG_NOERROR_IDX 0
gettext_noop ("Success") /* REG_NOERROR */
"\0"
#define REG_NOMATCH_IDX (REG_NOERROR_IDX + sizeof "Success")
gettext_noop ("No match") /* REG_NOMATCH */
"\0"
#define REG_BADPAT_IDX (REG_NOMATCH_IDX + sizeof "No match")
gettext_noop ("Invalid regular expression") /* REG_BADPAT */
"\0"
#define REG_ECOLLATE_IDX (REG_BADPAT_IDX + sizeof "Invalid regular expression")
gettext_noop ("Invalid collation character") /* REG_ECOLLATE */
"\0"
#define REG_ECTYPE_IDX (REG_ECOLLATE_IDX + sizeof "Invalid collation character")
gettext_noop ("Invalid character class name") /* REG_ECTYPE */
"\0"
#define REG_EESCAPE_IDX (REG_ECTYPE_IDX + sizeof "Invalid character class name")
gettext_noop ("Trailing backslash") /* REG_EESCAPE */
"\0"
#define REG_ESUBREG_IDX (REG_EESCAPE_IDX + sizeof "Trailing backslash")
gettext_noop ("Invalid back reference") /* REG_ESUBREG */
"\0"
#define REG_EBRACK_IDX (REG_ESUBREG_IDX + sizeof "Invalid back reference")
gettext_noop ("Unmatched [ or [^") /* REG_EBRACK */
"\0"
#define REG_EPAREN_IDX (REG_EBRACK_IDX + sizeof "Unmatched [ or [^")
gettext_noop ("Unmatched ( or \\(") /* REG_EPAREN */
"\0"
#define REG_EBRACE_IDX (REG_EPAREN_IDX + sizeof "Unmatched ( or \\(")
gettext_noop ("Unmatched \\{") /* REG_EBRACE */
"\0"
#define REG_BADBR_IDX (REG_EBRACE_IDX + sizeof "Unmatched \\{")
gettext_noop ("Invalid content of \\{\\}") /* REG_BADBR */
"\0"
#define REG_ERANGE_IDX (REG_BADBR_IDX + sizeof "Invalid content of \\{\\}")
gettext_noop ("Invalid range end") /* REG_ERANGE */
"\0"
#define REG_ESPACE_IDX (REG_ERANGE_IDX + sizeof "Invalid range end")
gettext_noop ("Memory exhausted") /* REG_ESPACE */
"\0"
#define REG_BADRPT_IDX (REG_ESPACE_IDX + sizeof "Memory exhausted")
gettext_noop ("Invalid preceding regular expression") /* REG_BADRPT */
"\0"
#define REG_EEND_IDX (REG_BADRPT_IDX + sizeof "Invalid preceding regular expression")
gettext_noop ("Premature end of regular expression") /* REG_EEND */
"\0"
#define REG_ESIZE_IDX (REG_EEND_IDX + sizeof "Premature end of regular expression")
gettext_noop ("Regular expression too big") /* REG_ESIZE */
"\0"
#define REG_ERPAREN_IDX (REG_ESIZE_IDX + sizeof "Regular expression too big")
gettext_noop ("Unmatched ) or \\)") /* REG_ERPAREN */
};
static const size_t re_error_msgid_idx[] =
{
REG_NOERROR_IDX,
REG_NOMATCH_IDX,
REG_BADPAT_IDX,
REG_ECOLLATE_IDX,
REG_ECTYPE_IDX,
REG_EESCAPE_IDX,
REG_ESUBREG_IDX,
REG_EBRACK_IDX,
REG_EPAREN_IDX,
REG_EBRACE_IDX,
REG_BADBR_IDX,
REG_ERANGE_IDX,
REG_ESPACE_IDX,
REG_BADRPT_IDX,
REG_EEND_IDX,
REG_ESIZE_IDX,
REG_ERPAREN_IDX
};
/* Avoiding alloca during matching, to placate r_alloc. */
/* Define MATCH_MAY_ALLOCATE unless we need to make sure that the
searching and matching functions should not call alloca. On some
systems, alloca is implemented in terms of malloc, and if we're
using the relocating allocator routines, then malloc could cause a
relocation, which might (if the strings being searched are in the
ralloc heap) shift the data out from underneath the regexp
routines.
Here's another reason to avoid allocation: Emacs
processes input from X in a signal handler; processing X input may
call malloc; if input arrives while a matching routine is calling
malloc, then we're scrod. But Emacs can't just block input while
calling matching routines; then we don't notice interrupts when
they come in. So, Emacs blocks input around all regexp calls
except the matching calls, which it leaves unprotected, in the
faith that they will not malloc. */
/* Normally, this is fine. */
#define MATCH_MAY_ALLOCATE
/* When using GNU C, we are not REALLY using the C alloca, no matter
what config.h may say. So don't take precautions for it. */
#ifdef __GNUC__
# undef C_ALLOCA
#endif
/* The match routines may not allocate if (1) they would do it with malloc
and (2) it's not safe for them to use malloc.
Note that if REL_ALLOC is defined, matching would not use malloc for the
failure stack, but we would still use it for the register vectors;
so REL_ALLOC should not affect this. */
#if (defined C_ALLOCA || defined REGEX_MALLOC) && defined emacs
# undef MATCH_MAY_ALLOCATE
#endif
/* Failure stack declarations and macros; both re_compile_fastmap and
re_match_2 use a failure stack. These have to be macros because of
REGEX_ALLOCATE_STACK. */
/* Number of failure points for which to initially allocate space
when matching. If this number is exceeded, we allocate more
space, so it is not a hard limit. */
#ifndef INIT_FAILURE_ALLOC
# define INIT_FAILURE_ALLOC 5
#endif
/* Roughly the maximum number of failure points on the stack. Would be
exactly that if always used MAX_FAILURE_ITEMS items each time we failed.
This is a variable only so users of regex can assign to it; we never
change it ourselves. */
#ifdef INT_IS_16BIT
# if defined MATCH_MAY_ALLOCATE
/* 4400 was enough to cause a crash on Alpha OSF/1,
whose default stack limit is 2mb. */
long int re_max_failures = 4000;
# else
long int re_max_failures = 2000;
# endif
union fail_stack_elt
{
unsigned char *pointer;
long int integer;
};
typedef union fail_stack_elt fail_stack_elt_t;
typedef struct
{
fail_stack_elt_t *stack;
unsigned long int size;
unsigned long int avail; /* Offset of next open position. */
} fail_stack_type;
#else /* not INT_IS_16BIT */
# if defined MATCH_MAY_ALLOCATE
/* 4400 was enough to cause a crash on Alpha OSF/1,
whose default stack limit is 2mb. */
int re_max_failures = 4000;
# else
int re_max_failures = 2000;
# endif
union fail_stack_elt
{
unsigned char *pointer;
int integer;
};
typedef union fail_stack_elt fail_stack_elt_t;
typedef struct
{
fail_stack_elt_t *stack;
unsigned size;
unsigned avail; /* Offset of next open position. */
} fail_stack_type;
#endif /* INT_IS_16BIT */
#define FAIL_STACK_EMPTY() (fail_stack.avail == 0)
#define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
#define FAIL_STACK_FULL() (fail_stack.avail == fail_stack.size)
/* Define macros to initialize and free the failure stack.
Do `return -2' if the alloc fails. */
#ifdef MATCH_MAY_ALLOCATE
# define INIT_FAIL_STACK() \
do { \
fail_stack.stack = (fail_stack_elt_t *) \
REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
\
if (fail_stack.stack == NULL) \
return -2; \
\
fail_stack.size = INIT_FAILURE_ALLOC; \
fail_stack.avail = 0; \
} while (0)
# define RESET_FAIL_STACK() REGEX_FREE_STACK (fail_stack.stack)
#else
# define INIT_FAIL_STACK() \
do { \
fail_stack.avail = 0; \
} while (0)
# define RESET_FAIL_STACK()
#endif
/* Double the size of FAIL_STACK, up to approximately `re_max_failures' items.
Return 1 if succeeds, and 0 if either ran out of memory
allocating space for it or it was already too large.
REGEX_REALLOCATE_STACK requires `destination' be declared. */
#define DOUBLE_FAIL_STACK(fail_stack) \
((fail_stack).size > (unsigned) (re_max_failures * MAX_FAILURE_ITEMS) \
? 0 \
: ((fail_stack).stack = (fail_stack_elt_t *) \
REGEX_REALLOCATE_STACK ((fail_stack).stack, \
(fail_stack).size * sizeof (fail_stack_elt_t), \
((fail_stack).size << 1) * sizeof (fail_stack_elt_t)), \
\
(fail_stack).stack == NULL \
? 0 \
: ((fail_stack).size <<= 1, \
1)))
/* Push pointer POINTER on FAIL_STACK.
Return 1 if was able to do so and 0 if ran out of memory allocating
space to do so. */
#define PUSH_PATTERN_OP(POINTER, FAIL_STACK) \
((FAIL_STACK_FULL () \
&& !DOUBLE_FAIL_STACK (FAIL_STACK)) \
? 0 \
: ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER, \
1))
/* Push a pointer value onto the failure stack.
Assumes the variable `fail_stack'. Probably should only
be called from within `PUSH_FAILURE_POINT'. */
#define PUSH_FAILURE_POINTER(item) \
fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
/* This pushes an integer-valued item onto the failure stack.
Assumes the variable `fail_stack'. Probably should only
be called from within `PUSH_FAILURE_POINT'. */
#define PUSH_FAILURE_INT(item) \
fail_stack.stack[fail_stack.avail++].integer = (item)
/* Push a fail_stack_elt_t value onto the failure stack.
Assumes the variable `fail_stack'. Probably should only
be called from within `PUSH_FAILURE_POINT'. */
#define PUSH_FAILURE_ELT(item) \
fail_stack.stack[fail_stack.avail++] = (item)
/* These three POP... operations complement the three PUSH... operations.
All assume that `fail_stack' is nonempty. */
#define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
#define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
#define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
/* Used to omit pushing failure point id's when we're not debugging. */
#ifdef DEBUG
# define DEBUG_PUSH PUSH_FAILURE_INT
# define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
#else
# define DEBUG_PUSH(item)
# define DEBUG_POP(item_addr)
#endif
/* Push the information about the state we will need
if we ever fail back to it.
Requires variables fail_stack, regstart, regend, reg_info, and
num_regs_pushed be declared. DOUBLE_FAIL_STACK requires `destination'
be declared.
Does `return FAILURE_CODE' if runs out of memory. */
#define PUSH_FAILURE_POINT(pattern_place, string_place, failure_code) \
do { \
char *destination; \
/* Must be int, so when we don't save any registers, the arithmetic \
of 0 + -1 isn't done as unsigned. */ \
/* Can't be int, since there is not a shred of a guarantee that int \
is wide enough to hold a value of something to which pointer can \
be assigned */ \
active_reg_t this_reg; \
\
DEBUG_STATEMENT (failure_id++); \
DEBUG_STATEMENT (nfailure_points_pushed++); \
DEBUG_PRINT2 ("\nPUSH_FAILURE_POINT #%u:\n", failure_id); \
DEBUG_PRINT2 (" Before push, next avail: %d\n", (fail_stack).avail);\
DEBUG_PRINT2 (" size: %d\n", (fail_stack).size);\
\
DEBUG_PRINT2 (" slots needed: %ld\n", NUM_FAILURE_ITEMS); \
DEBUG_PRINT2 (" available: %d\n", REMAINING_AVAIL_SLOTS); \
\
/* Ensure we have enough space allocated for what we will push. */ \
while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS) \
{ \
if (!DOUBLE_FAIL_STACK (fail_stack)) \
return failure_code; \
\
DEBUG_PRINT2 ("\n Doubled stack; size now: %d\n", \
(fail_stack).size); \
DEBUG_PRINT2 (" slots available: %d\n", REMAINING_AVAIL_SLOTS);\
} \
\
/* Push the info, starting with the registers. */ \
DEBUG_PRINT1 ("\n"); \
\
if (1) \
for (this_reg = lowest_active_reg; this_reg <= highest_active_reg; \
this_reg++) \
{ \
DEBUG_PRINT2 (" Pushing reg: %lu\n", this_reg); \
DEBUG_STATEMENT (num_regs_pushed++); \
\
DEBUG_PRINT2 (" start: %p\n", regstart[this_reg]); \
PUSH_FAILURE_POINTER (regstart[this_reg]); \
\
DEBUG_PRINT2 (" end: %p\n", regend[this_reg]); \
PUSH_FAILURE_POINTER (regend[this_reg]); \
\
DEBUG_PRINT2 (" info: %p\n ", \
reg_info[this_reg].word.pointer); \
DEBUG_PRINT2 (" match_null=%d", \
REG_MATCH_NULL_STRING_P (reg_info[this_reg])); \
DEBUG_PRINT2 (" active=%d", IS_ACTIVE (reg_info[this_reg])); \
DEBUG_PRINT2 (" matched_something=%d", \
MATCHED_SOMETHING (reg_info[this_reg])); \
DEBUG_PRINT2 (" ever_matched=%d", \
EVER_MATCHED_SOMETHING (reg_info[this_reg])); \
DEBUG_PRINT1 ("\n"); \
PUSH_FAILURE_ELT (reg_info[this_reg].word); \
} \
\
DEBUG_PRINT2 (" Pushing low active reg: %ld\n", lowest_active_reg);\
PUSH_FAILURE_INT (lowest_active_reg); \
\
DEBUG_PRINT2 (" Pushing high active reg: %ld\n", highest_active_reg);\
PUSH_FAILURE_INT (highest_active_reg); \
\
DEBUG_PRINT2 (" Pushing pattern %p:\n", pattern_place); \
DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend); \
PUSH_FAILURE_POINTER (pattern_place); \
\
DEBUG_PRINT2 (" Pushing string %p: `", string_place); \
DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2, \
size2); \
DEBUG_PRINT1 ("'\n"); \
PUSH_FAILURE_POINTER (string_place); \
\
DEBUG_PRINT2 (" Pushing failure id: %u\n", failure_id); \
DEBUG_PUSH (failure_id); \
} while (0)
/* This is the number of items that are pushed and popped on the stack
for each register. */
#define NUM_REG_ITEMS 3
/* Individual items aside from the registers. */
#ifdef DEBUG
# define NUM_NONREG_ITEMS 5 /* Includes failure point id. */
#else
# define NUM_NONREG_ITEMS 4
#endif
/* We push at most this many items on the stack. */
/* We used to use (num_regs - 1), which is the number of registers
this regexp will save; but that was changed to 5
to avoid stack overflow for a regexp with lots of parens. */
#define MAX_FAILURE_ITEMS (5 * NUM_REG_ITEMS + NUM_NONREG_ITEMS)
/* We actually push this many items. */
#define NUM_FAILURE_ITEMS \
(((0 \
? 0 : highest_active_reg - lowest_active_reg + 1) \
* NUM_REG_ITEMS) \
+ NUM_NONREG_ITEMS)
/* How many items can still be added to the stack without overflowing it. */
#define REMAINING_AVAIL_SLOTS ((fail_stack).size - (fail_stack).avail)
/* Pops what PUSH_FAIL_STACK pushes.
We restore into the parameters, all of which should be lvalues:
STR -- the saved data position.
PAT -- the saved pattern position.
LOW_REG, HIGH_REG -- the highest and lowest active registers.
REGSTART, REGEND -- arrays of string positions.
REG_INFO -- array of information about each subexpression.
Also assumes the variables `fail_stack' and (if debugging), `bufp',
`pend', `string1', `size1', `string2', and `size2'. */
#define POP_FAILURE_POINT(str, pat, low_reg, high_reg, regstart, regend, reg_info)\
{ \
DEBUG_STATEMENT (unsigned failure_id;) \
active_reg_t this_reg; \
const unsigned char *string_temp; \
\
assert (!FAIL_STACK_EMPTY ()); \
\
/* Remove failure points and point to how many regs pushed. */ \
DEBUG_PRINT1 ("POP_FAILURE_POINT:\n"); \
DEBUG_PRINT2 (" Before pop, next avail: %d\n", fail_stack.avail); \
DEBUG_PRINT2 (" size: %d\n", fail_stack.size); \
\
assert (fail_stack.avail >= NUM_NONREG_ITEMS); \
\
DEBUG_POP (&failure_id); \
DEBUG_PRINT2 (" Popping failure id: %u\n", failure_id); \
\
/* If the saved string location is NULL, it came from an \
on_failure_keep_string_jump opcode, and we want to throw away the \
saved NULL, thus retaining our current position in the string. */ \
string_temp = POP_FAILURE_POINTER (); \
if (string_temp != NULL) \
str = (const char *) string_temp; \
\
DEBUG_PRINT2 (" Popping string %p: `", str); \
DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2); \
DEBUG_PRINT1 ("'\n"); \
\
pat = (unsigned char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" Popping pattern %p:\n", pat); \
DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend); \
\
/* Restore register info. */ \
high_reg = (active_reg_t) POP_FAILURE_INT (); \
DEBUG_PRINT2 (" Popping high active reg: %ld\n", high_reg); \
\
low_reg = (active_reg_t) POP_FAILURE_INT (); \
DEBUG_PRINT2 (" Popping low active reg: %ld\n", low_reg); \
\
if (1) \
for (this_reg = high_reg; this_reg >= low_reg; this_reg--) \
{ \
DEBUG_PRINT2 (" Popping reg: %ld\n", this_reg); \
\
reg_info[this_reg].word = POP_FAILURE_ELT (); \
DEBUG_PRINT2 (" info: %p\n", \
reg_info[this_reg].word.pointer); \
\
regend[this_reg] = (const char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" end: %p\n", regend[this_reg]); \
\
regstart[this_reg] = (const char *) POP_FAILURE_POINTER (); \
DEBUG_PRINT2 (" start: %p\n", regstart[this_reg]); \
} \
else \
{ \
for (this_reg = highest_active_reg; this_reg > high_reg; this_reg--) \
{ \
reg_info[this_reg].word.integer = 0; \
regend[this_reg] = 0; \
regstart[this_reg] = 0; \
} \
highest_active_reg = high_reg; \
} \
\
set_regs_matched_done = 0; \
DEBUG_STATEMENT (nfailure_points_popped++); \
} /* POP_FAILURE_POINT */
/* Structure for per-register (a.k.a. per-group) information.
Other register information, such as the
starting and ending positions (which are addresses), and the list of
inner groups (which is a bits list) are maintained in separate
variables.
We are making a (strictly speaking) nonportable assumption here: that
the compiler will pack our bit fields into something that fits into
the type of `word', i.e., is something that fits into one item on the
failure stack. */
/* Declarations and macros for re_match_2. */
typedef union
{
fail_stack_elt_t word;
struct
{
/* This field is one if this group can match the empty string,
zero if not. If not yet determined, `MATCH_NULL_UNSET_VALUE'. */
#define MATCH_NULL_UNSET_VALUE 3
unsigned match_null_string_p : 2;
unsigned is_active : 1;
unsigned matched_something : 1;
unsigned ever_matched_something : 1;
} bits;
} register_info_type;
#define REG_MATCH_NULL_STRING_P(R) ((R).bits.match_null_string_p)
#define IS_ACTIVE(R) ((R).bits.is_active)
#define MATCHED_SOMETHING(R) ((R).bits.matched_something)
#define EVER_MATCHED_SOMETHING(R) ((R).bits.ever_matched_something)
/* Call this when have matched a real character; it sets `matched' flags
for the subexpressions which we are currently inside. Also records
that those subexprs have matched. */
#define SET_REGS_MATCHED() \
do \
{ \
if (!set_regs_matched_done) \
{ \
active_reg_t r; \
set_regs_matched_done = 1; \
for (r = lowest_active_reg; r <= highest_active_reg; r++) \
{ \
MATCHED_SOMETHING (reg_info[r]) \
= EVER_MATCHED_SOMETHING (reg_info[r]) \
= 1; \
} \
} \
} \
while (0)
/* Registers are set to a sentinel when they haven't yet matched. */
static char reg_unset_dummy;
#define REG_UNSET_VALUE (&reg_unset_dummy)
#define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
/* Subroutine declarations and macros for regex_compile. */
static reg_errcode_t regex_compile _RE_ARGS ((const char *pattern, size_t size,
reg_syntax_t syntax,
struct re_pattern_buffer *bufp));
static void store_op1 _RE_ARGS ((re_opcode_t op, unsigned char *loc, int arg));
static void store_op2 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
int arg1, int arg2));
static void insert_op1 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
int arg, unsigned char *end));
static void insert_op2 _RE_ARGS ((re_opcode_t op, unsigned char *loc,
int arg1, int arg2, unsigned char *end));
static boolean at_begline_loc_p _RE_ARGS ((const char *pattern, const char *p,
reg_syntax_t syntax));
static boolean at_endline_loc_p _RE_ARGS ((const char *p, const char *pend,
reg_syntax_t syntax));
static reg_errcode_t compile_range _RE_ARGS ((unsigned int range_start,
const char **p_ptr,
const char *pend,
char *translate,
reg_syntax_t syntax,
unsigned char *b));
/* Fetch the next character in the uncompiled pattern---translating it
if necessary. Also cast from a signed character in the constant
string passed to us by the user to an unsigned char that we can use
as an array index (in, e.g., `translate'). */
#ifndef PATFETCH
# define PATFETCH(c) \
do {if (p == pend) return REG_EEND; \
c = (unsigned char) *p++; \
if (translate) c = (unsigned char) translate[c]; \
} while (0)
#endif
/* Fetch the next character in the uncompiled pattern, with no
translation. */
#define PATFETCH_RAW(c) \
do {if (p == pend) return REG_EEND; \
c = (unsigned char) *p++; \
} while (0)
/* Go backwards one character in the pattern. */
#define PATUNFETCH p--
/* If `translate' is non-null, return translate[D], else just D. We
cast the subscript to translate because some data is declared as
`char *', to avoid warnings when a string constant is passed. But
when we use a character as a subscript we must make it unsigned. */
#ifndef TRANSLATE
# define TRANSLATE(d) \
(translate ? (char) translate[(unsigned char) (d)] : (d))
#endif
/* Macros for outputting the compiled pattern into `buffer'. */
/* If the buffer isn't allocated when it comes in, use this. */
#define INIT_BUF_SIZE 32
/* Make sure we have at least N more bytes of space in buffer. */
#define GET_BUFFER_SPACE(n) \
while ((unsigned long) (b - bufp->buffer + (n)) > bufp->allocated) \
EXTEND_BUFFER ()
/* Make sure we have one more byte of buffer space and then add C to it. */
#define BUF_PUSH(c) \
do { \
GET_BUFFER_SPACE (1); \
*b++ = (unsigned char) (c); \
} while (0)
/* Ensure we have two more bytes of buffer space and then append C1 and C2. */
#define BUF_PUSH_2(c1, c2) \
do { \
GET_BUFFER_SPACE (2); \
*b++ = (unsigned char) (c1); \
*b++ = (unsigned char) (c2); \
} while (0)
/* As with BUF_PUSH_2, except for three bytes. */
#define BUF_PUSH_3(c1, c2, c3) \
do { \
GET_BUFFER_SPACE (3); \
*b++ = (unsigned char) (c1); \
*b++ = (unsigned char) (c2); \
*b++ = (unsigned char) (c3); \
} while (0)
/* Store a jump with opcode OP at LOC to location TO. We store a
relative address offset by the three bytes the jump itself occupies. */
#define STORE_JUMP(op, loc, to) \
store_op1 (op, loc, (int) ((to) - (loc) - 3))
/* Likewise, for a two-argument jump. */
#define STORE_JUMP2(op, loc, to, arg) \
store_op2 (op, loc, (int) ((to) - (loc) - 3), arg)
/* Like `STORE_JUMP', but for inserting. Assume `b' is the buffer end. */
#define INSERT_JUMP(op, loc, to) \
insert_op1 (op, loc, (int) ((to) - (loc) - 3), b)
/* Like `STORE_JUMP2', but for inserting. Assume `b' is the buffer end. */
#define INSERT_JUMP2(op, loc, to, arg) \
insert_op2 (op, loc, (int) ((to) - (loc) - 3), arg, b)
/* This is not an arbitrary limit: the arguments which represent offsets
into the pattern are two bytes long. So if 2^16 bytes turns out to
be too small, many things would have to change. */
/* Any other compiler which, like MSC, has allocation limit below 2^16
bytes will have to use approach similar to what was done below for
MSC and drop MAX_BUF_SIZE a bit. Otherwise you may end up
reallocating to 0 bytes. Such thing is not going to work too well.
You have been warned!! */
#if defined _MSC_VER && !defined WIN32
/* Microsoft C 16-bit versions limit malloc to approx 65512 bytes.
The REALLOC define eliminates a flurry of conversion warnings,
but is not required. */
# define MAX_BUF_SIZE 65500L
# define REALLOC(p,s) realloc ((p), (size_t) (s))
#else
# define MAX_BUF_SIZE (1L << 16)
# define REALLOC(p,s) realloc ((p), (s))
#endif
/* Extend the buffer by twice its current size via realloc and
reset the pointers that pointed into the old block to point to the
correct places in the new one. If extending the buffer results in it
being larger than MAX_BUF_SIZE, then flag memory exhausted. */
#if __BOUNDED_POINTERS__
# define SET_HIGH_BOUND(P) (__ptrhigh (P) = __ptrlow (P) + bufp->allocated)
# define MOVE_BUFFER_POINTER(P) \
(__ptrlow (P) += incr, SET_HIGH_BOUND (P), __ptrvalue (P) += incr)
# define ELSE_EXTEND_BUFFER_HIGH_BOUND \
else \
{ \
SET_HIGH_BOUND (b); \
SET_HIGH_BOUND (begalt); \
if (fixup_alt_jump) \
SET_HIGH_BOUND (fixup_alt_jump); \
if (laststart) \
SET_HIGH_BOUND (laststart); \
if (pending_exact) \
SET_HIGH_BOUND (pending_exact); \
}
#else
# define MOVE_BUFFER_POINTER(P) (P) += incr
# define ELSE_EXTEND_BUFFER_HIGH_BOUND
#endif
#define EXTEND_BUFFER() \
do { \
unsigned char *old_buffer = bufp->buffer; \
if (bufp->allocated == MAX_BUF_SIZE) \
return REG_ESIZE; \
bufp->allocated <<= 1; \
if (bufp->allocated > MAX_BUF_SIZE) \
bufp->allocated = MAX_BUF_SIZE; \
bufp->buffer = (unsigned char *) REALLOC (bufp->buffer, bufp->allocated);\
if (bufp->buffer == NULL) \
return REG_ESPACE; \
/* If the buffer moved, move all the pointers into it. */ \
if (old_buffer != bufp->buffer) \
{ \
int incr = bufp->buffer - old_buffer; \
MOVE_BUFFER_POINTER (b); \
MOVE_BUFFER_POINTER (begalt); \
if (fixup_alt_jump) \
MOVE_BUFFER_POINTER (fixup_alt_jump); \
if (laststart) \
MOVE_BUFFER_POINTER (laststart); \
if (pending_exact) \
MOVE_BUFFER_POINTER (pending_exact); \
} \
ELSE_EXTEND_BUFFER_HIGH_BOUND \
} while (0)
/* Since we have one byte reserved for the register number argument to
{start,stop}_memory, the maximum number of groups we can report
things about is what fits in that byte. */
#define MAX_REGNUM 255
/* But patterns can have more than `MAX_REGNUM' registers. We just
ignore the excess. */
typedef unsigned regnum_t;
/* Macros for the compile stack. */
/* Since offsets can go either forwards or backwards, this type needs to
be able to hold values from -(MAX_BUF_SIZE - 1) to MAX_BUF_SIZE - 1. */
/* int may be not enough when sizeof(int) == 2. */
typedef long pattern_offset_t;
typedef struct
{
pattern_offset_t begalt_offset;
pattern_offset_t fixup_alt_jump;
pattern_offset_t inner_group_offset;
pattern_offset_t laststart_offset;
regnum_t regnum;
} compile_stack_elt_t;
typedef struct
{
compile_stack_elt_t *stack;
unsigned size;
unsigned avail; /* Offset of next open position. */
} compile_stack_type;
#define INIT_COMPILE_STACK_SIZE 32
#define COMPILE_STACK_EMPTY (compile_stack.avail == 0)
#define COMPILE_STACK_FULL (compile_stack.avail == compile_stack.size)
/* The next available element. */
#define COMPILE_STACK_TOP (compile_stack.stack[compile_stack.avail])
/* Set the bit for character C in a list. */
#define SET_LIST_BIT(c) \
(b[((unsigned char) (c)) / BYTEWIDTH] \
|= 1 << (((unsigned char) c) % BYTEWIDTH))
/* Get the next unsigned number in the uncompiled pattern. */
#define GET_UNSIGNED_NUMBER(num) \
{ if (p != pend) \
{ \
PATFETCH (c); \
while ('0' <= c && c <= '9') \
{ \
if (num < 0) \
num = 0; \
num = num * 10 + c - '0'; \
if (p == pend) \
break; \
PATFETCH (c); \
} \
} \
}
#if defined _LIBC || WIDE_CHAR_SUPPORT
/* The GNU C library provides support for user-defined character classes
and the functions from ISO C amendement 1. */
# ifdef CHARCLASS_NAME_MAX
# define CHAR_CLASS_MAX_LENGTH CHARCLASS_NAME_MAX
# else
/* This shouldn't happen but some implementation might still have this
problem. Use a reasonable default value. */
# define CHAR_CLASS_MAX_LENGTH 256
# endif
# ifdef _LIBC
# define IS_CHAR_CLASS(string) __wctype (string)
# else
# define IS_CHAR_CLASS(string) wctype (string)
# endif
#else
# define CHAR_CLASS_MAX_LENGTH 6 /* Namely, `xdigit'. */
# define IS_CHAR_CLASS(string) \
(STREQ (string, "alpha") || STREQ (string, "upper") \
|| STREQ (string, "lower") || STREQ (string, "digit") \
|| STREQ (string, "alnum") || STREQ (string, "xdigit") \
|| STREQ (string, "space") || STREQ (string, "print") \
|| STREQ (string, "punct") || STREQ (string, "graph") \
|| STREQ (string, "cntrl") || STREQ (string, "blank"))
#endif
#ifndef MATCH_MAY_ALLOCATE
/* If we cannot allocate large objects within re_match_2_internal,
we make the fail stack and register vectors global.
The fail stack, we grow to the maximum size when a regexp
is compiled.
The register vectors, we adjust in size each time we
compile a regexp, according to the number of registers it needs. */
static fail_stack_type fail_stack;
/* Size with which the following vectors are currently allocated.
That is so we can make them bigger as needed,
but never make them smaller. */
static int regs_allocated_size;
static const char ** regstart, ** regend;
static const char ** old_regstart, ** old_regend;
static const char **best_regstart, **best_regend;
static register_info_type *reg_info;
static const char **reg_dummy;
static register_info_type *reg_info_dummy;
/* Make the register vectors big enough for NUM_REGS registers,
but don't make them smaller. */
static
regex_grow_registers (num_regs)
int num_regs;
{
if (num_regs > regs_allocated_size)
{
RETALLOC_IF (regstart, num_regs, const char *);
RETALLOC_IF (regend, num_regs, const char *);
RETALLOC_IF (old_regstart, num_regs, const char *);
RETALLOC_IF (old_regend, num_regs, const char *);
RETALLOC_IF (best_regstart, num_regs, const char *);
RETALLOC_IF (best_regend, num_regs, const char *);
RETALLOC_IF (reg_info, num_regs, register_info_type);
RETALLOC_IF (reg_dummy, num_regs, const char *);
RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
regs_allocated_size = num_regs;
}
}
#endif /* not MATCH_MAY_ALLOCATE */
static boolean group_in_compile_stack _RE_ARGS ((compile_stack_type
compile_stack,
regnum_t regnum));
/* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
Returns one of error codes defined in `regex.h', or zero for success.
Assumes the `allocated' (and perhaps `buffer') and `translate'
fields are set in BUFP on entry.
If it succeeds, results are put in BUFP (if it returns an error, the
contents of BUFP are undefined):
`buffer' is the compiled pattern;
`syntax' is set to SYNTAX;
`used' is set to the length of the compiled pattern;
`fastmap_accurate' is zero;
`re_nsub' is the number of subexpressions in PATTERN;
`not_bol' and `not_eol' are zero;
The `fastmap' and `newline_anchor' fields are neither
examined nor set. */
/* Return, freeing storage we allocated. */
#define FREE_STACK_RETURN(value) \
return (free (compile_stack.stack), value)
static reg_errcode_t
regex_compile (pattern, size, syntax, bufp)
const char *pattern;
size_t size;
reg_syntax_t syntax;
struct re_pattern_buffer *bufp;
{
/* We fetch characters from PATTERN here. Even though PATTERN is
`char *' (i.e., signed), we declare these variables as unsigned, so
they can be reliably used as array indices. */
register unsigned char c, c1;
/* A random temporary spot in PATTERN. */
const char *p1;
/* Points to the end of the buffer, where we should append. */
register unsigned char *b;
/* Keeps track of unclosed groups. */
compile_stack_type compile_stack;
/* Points to the current (ending) position in the pattern. */
const char *p = pattern;
const char *pend = pattern + size;
/* How to translate the characters in the pattern. */
RE_TRANSLATE_TYPE translate = bufp->translate;
/* Address of the count-byte of the most recently inserted `exactn'
command. This makes it possible to tell if a new exact-match
character can be added to that command or if the character requires
a new `exactn' command. */
unsigned char *pending_exact = 0;
/* Address of start of the most recently finished expression.
This tells, e.g., postfix * where to find the start of its
operand. Reset at the beginning of groups and alternatives. */
unsigned char *laststart = 0;
/* Address of beginning of regexp, or inside of last group. */
unsigned char *begalt;
/* Place in the uncompiled pattern (i.e., the {) to
which to go back if the interval is invalid. */
const char *beg_interval;
/* Address of the place where a forward jump should go to the end of
the containing expression. Each alternative of an `or' -- except the
last -- ends with a forward jump of this sort. */
unsigned char *fixup_alt_jump = 0;
/* Counts open-groups as they are encountered. Remembered for the
matching close-group on the compile stack, so the same register
number is put in the stop_memory as the start_memory. */
regnum_t regnum = 0;
#ifdef DEBUG
DEBUG_PRINT1 ("\nCompiling pattern: ");
if (debug)
{
unsigned debug_count;
for (debug_count = 0; debug_count < size; debug_count++)
putchar (pattern[debug_count]);
putchar ('\n');
}
#endif /* DEBUG */
/* Initialize the compile stack. */
compile_stack.stack = TALLOC (INIT_COMPILE_STACK_SIZE, compile_stack_elt_t);
if (compile_stack.stack == NULL)
return REG_ESPACE;
compile_stack.size = INIT_COMPILE_STACK_SIZE;
compile_stack.avail = 0;
/* Initialize the pattern buffer. */
bufp->syntax = syntax;
bufp->fastmap_accurate = 0;
bufp->not_bol = bufp->not_eol = 0;
/* Set `used' to zero, so that if we return an error, the pattern
printer (for debugging) will think there's no pattern. We reset it
at the end. */
bufp->used = 0;
/* Always count groups, whether or not bufp->no_sub is set. */
bufp->re_nsub = 0;
#if !defined emacs && !defined SYNTAX_TABLE
/* Initialize the syntax table. */
init_syntax_once ();
#endif
if (bufp->allocated == 0)
{
if (bufp->buffer)
{ /* If zero allocated, but buffer is non-null, try to realloc
enough space. This loses if buffer's address is bogus, but
that is the user's responsibility. */
RETALLOC (bufp->buffer, INIT_BUF_SIZE, unsigned char);
}
else
{ /* Caller did not allocate a buffer. Do it for them. */
bufp->buffer = TALLOC (INIT_BUF_SIZE, unsigned char);
}
if (!bufp->buffer) FREE_STACK_RETURN (REG_ESPACE);
bufp->allocated = INIT_BUF_SIZE;
}
begalt = b = bufp->buffer;
/* Loop through the uncompiled pattern until we're at the end. */
while (p != pend)
{
PATFETCH (c);
switch (c)
{
case '^':
{
if ( /* If at start of pattern, it's an operator. */
p == pattern + 1
/* If context independent, it's an operator. */
|| syntax & RE_CONTEXT_INDEP_ANCHORS
/* Otherwise, depends on what's come before. */
|| at_begline_loc_p (pattern, p, syntax))
BUF_PUSH (begline);
else
goto normal_char;
}
break;
case '$':
{
if ( /* If at end of pattern, it's an operator. */
p == pend
/* If context independent, it's an operator. */
|| syntax & RE_CONTEXT_INDEP_ANCHORS
/* Otherwise, depends on what's next. */
|| at_endline_loc_p (p, pend, syntax))
BUF_PUSH (endline);
else
goto normal_char;
}
break;
case '+':
case '?':
if ((syntax & RE_BK_PLUS_QM)
|| (syntax & RE_LIMITED_OPS))
goto normal_char;
handle_plus:
case '*':
/* If there is no previous pattern... */
if (!laststart)
{
if (syntax & RE_CONTEXT_INVALID_OPS)
FREE_STACK_RETURN (REG_BADRPT);
else if (!(syntax & RE_CONTEXT_INDEP_OPS))
goto normal_char;
}
{
/* Are we optimizing this jump? */
boolean keep_string_p = false;
/* 1 means zero (many) matches is allowed. */
char zero_times_ok = 0, many_times_ok = 0;
/* If there is a sequence of repetition chars, collapse it
down to just one (the right one). We can't combine
interval operators with these because of, e.g., `a{2}*',
which should only match an even number of `a's. */
for (;;)
{
zero_times_ok |= c != '+';
many_times_ok |= c != '?';
if (p == pend)
break;
PATFETCH (c);
if (c == '*'
|| (!(syntax & RE_BK_PLUS_QM) && (c == '+' || c == '?')))
;
else if (syntax & RE_BK_PLUS_QM && c == '\\')
{
if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
PATFETCH (c1);
if (!(c1 == '+' || c1 == '?'))
{
PATUNFETCH;
PATUNFETCH;
break;
}
c = c1;
}
else
{
PATUNFETCH;
break;
}
/* If we get here, we found another repeat character. */
}
/* Star, etc. applied to an empty pattern is equivalent
to an empty pattern. */
if (!laststart)
break;
/* Now we know whether or not zero matches is allowed
and also whether or not two or more matches is allowed. */
if (many_times_ok)
{ /* More than one repetition is allowed, so put in at the
end a backward relative jump from `b' to before the next
jump we're going to put in below (which jumps from
laststart to after this jump).
But if we are at the `*' in the exact sequence `.*\n',
insert an unconditional jump backwards to the .,
instead of the beginning of the loop. This way we only
push a failure point once, instead of every time
through the loop. */
assert (p - 1 > pattern);
/* Allocate the space for the jump. */
GET_BUFFER_SPACE (3);
/* We know we are not at the first character of the pattern,
because laststart was nonzero. And we've already
incremented `p', by the way, to be the character after
the `*'. Do we have to do something analogous here
for null bytes, because of RE_DOT_NOT_NULL? */
if (TRANSLATE (*(p - 2)) == TRANSLATE ('.')
&& zero_times_ok
&& p < pend && TRANSLATE (*p) == TRANSLATE ('\n')
&& !(syntax & RE_DOT_NEWLINE))
{ /* We have .*\n. */
STORE_JUMP (jump, b, laststart);
keep_string_p = true;
}
else
/* Anything else. */
STORE_JUMP (maybe_pop_jump, b, laststart - 3);
/* We've added more stuff to the buffer. */
b += 3;
}
/* On failure, jump from laststart to b + 3, which will be the
end of the buffer after this jump is inserted. */
GET_BUFFER_SPACE (3);
INSERT_JUMP (keep_string_p ? on_failure_keep_string_jump
: on_failure_jump,
laststart, b + 3);
pending_exact = 0;
b += 3;
if (!zero_times_ok)
{
/* At least one repetition is required, so insert a
`dummy_failure_jump' before the initial
`on_failure_jump' instruction of the loop. This
effects a skip over that instruction the first time
we hit that loop. */
GET_BUFFER_SPACE (3);
INSERT_JUMP (dummy_failure_jump, laststart, laststart + 6);
b += 3;
}
}
break;
case '.':
laststart = b;
BUF_PUSH (anychar);
break;
case '[':
{
boolean had_char_class = false;
unsigned int range_start = 0xffffffff;
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
/* Ensure that we have enough space to push a charset: the
opcode, the length count, and the bitset; 34 bytes in all. */
GET_BUFFER_SPACE (34);
laststart = b;
/* We test `*p == '^' twice, instead of using an if
statement, so we only need one BUF_PUSH. */
BUF_PUSH (*p == '^' ? charset_not : charset);
if (*p == '^')
p++;
/* Remember the first position in the bracket expression. */
p1 = p;
/* Push the number of bytes in the bitmap. */
BUF_PUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
/* Clear the whole map. */
bzero (b, (1 << BYTEWIDTH) / BYTEWIDTH);
/* charset_not matches newline according to a syntax bit. */
if ((re_opcode_t) b[-2] == charset_not
&& (syntax & RE_HAT_LISTS_NOT_NEWLINE))
SET_LIST_BIT ('\n');
/* Read in characters and ranges, setting map bits. */
for (;;)
{
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
PATFETCH (c);
/* \ might escape characters inside [...] and [^...]. */
if ((syntax & RE_BACKSLASH_ESCAPE_IN_LISTS) && c == '\\')
{
if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
PATFETCH (c1);
SET_LIST_BIT (c1);
range_start = c1;
continue;
}
/* Could be the end of the bracket expression. If it's
not (i.e., when the bracket expression is `[]' so
far), the ']' character bit gets set way below. */
if (c == ']' && p != p1 + 1)
break;
/* Look ahead to see if it's a range when the last thing
was a character class. */
if (had_char_class && c == '-' && *p != ']')
FREE_STACK_RETURN (REG_ERANGE);
/* Look ahead to see if it's a range when the last thing
was a character: if this is a hyphen not at the
beginning or the end of a list, then it's the range
operator. */
if (c == '-'
&& !(p - 2 >= pattern && p[-2] == '[')
&& !(p - 3 >= pattern && p[-3] == '[' && p[-2] == '^')
&& *p != ']')
{
reg_errcode_t ret
= compile_range (range_start, &p, pend, translate,
syntax, b);
if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
range_start = 0xffffffff;
}
else if (p[0] == '-' && p[1] != ']')
{ /* This handles ranges made up of characters only. */
reg_errcode_t ret;
/* Move past the `-'. */
PATFETCH (c1);
ret = compile_range (c, &p, pend, translate, syntax, b);
if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
range_start = 0xffffffff;
}
/* See if we're at the beginning of a possible character
class. */
else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
{ /* Leave room for the null. */
char str[CHAR_CLASS_MAX_LENGTH + 1];
PATFETCH (c);
c1 = 0;
/* If pattern is `[[:'. */
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
for (;;)
{
PATFETCH (c);
if ((c == ':' && *p == ']') || p == pend)
break;
if (c1 < CHAR_CLASS_MAX_LENGTH)
str[c1++] = c;
else
/* This is in any case an invalid class name. */
str[0] = '\0';
}
str[c1] = '\0';
/* If isn't a word bracketed by `[:' and `:]':
undo the ending character, the letters, and leave
the leading `:' and `[' (but set bits for them). */
if (c == ':' && *p == ']')
{
#if defined _LIBC || WIDE_CHAR_SUPPORT
boolean is_lower = STREQ (str, "lower");
boolean is_upper = STREQ (str, "upper");
wctype_t wt;
int ch;
wt = IS_CHAR_CLASS (str);
if (wt == 0)
FREE_STACK_RETURN (REG_ECTYPE);
/* Throw away the ] at the end of the character
class. */
PATFETCH (c);
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
for (ch = 0; ch < 1 << BYTEWIDTH; ++ch)
{
# ifdef _LIBC
if (__iswctype (__btowc (ch), wt))
SET_LIST_BIT (ch);
# else
if (iswctype (btowc (ch), wt))
SET_LIST_BIT (ch);
# endif
if (translate && (is_upper || is_lower)
&& (ISUPPER (ch) || ISLOWER (ch)))
SET_LIST_BIT (ch);
}
had_char_class = true;
#else
int ch;
boolean is_alnum = STREQ (str, "alnum");
boolean is_alpha = STREQ (str, "alpha");
boolean is_blank = STREQ (str, "blank");
boolean is_cntrl = STREQ (str, "cntrl");
boolean is_digit = STREQ (str, "digit");
boolean is_graph = STREQ (str, "graph");
boolean is_lower = STREQ (str, "lower");
boolean is_print = STREQ (str, "print");
boolean is_punct = STREQ (str, "punct");
boolean is_space = STREQ (str, "space");
boolean is_upper = STREQ (str, "upper");
boolean is_xdigit = STREQ (str, "xdigit");
if (!IS_CHAR_CLASS (str))
FREE_STACK_RETURN (REG_ECTYPE);
/* Throw away the ] at the end of the character
class. */
PATFETCH (c);
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
for (ch = 0; ch < 1 << BYTEWIDTH; ch++)
{
/* This was split into 3 if's to
avoid an arbitrary limit in some compiler. */
if ( (is_alnum && ISALNUM (ch))
|| (is_alpha && ISALPHA (ch))
|| (is_blank && ISBLANK (ch))
|| (is_cntrl && ISCNTRL (ch)))
SET_LIST_BIT (ch);
if ( (is_digit && ISDIGIT (ch))
|| (is_graph && ISGRAPH (ch))
|| (is_lower && ISLOWER (ch))
|| (is_print && ISPRINT (ch)))
SET_LIST_BIT (ch);
if ( (is_punct && ISPUNCT (ch))
|| (is_space && ISSPACE (ch))
|| (is_upper && ISUPPER (ch))
|| (is_xdigit && ISXDIGIT (ch)))
SET_LIST_BIT (ch);
if ( translate && (is_upper || is_lower)
&& (ISUPPER (ch) || ISLOWER (ch)))
SET_LIST_BIT (ch);
}
had_char_class = true;
#endif /* libc || wctype.h */
}
else
{
c1++;
while (c1--)
PATUNFETCH;
SET_LIST_BIT ('[');
SET_LIST_BIT (':');
range_start = ':';
had_char_class = false;
}
}
else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == '=')
{
unsigned char str[MB_LEN_MAX + 1];
#ifdef _LIBC
uint32_t nrules =
_NL_CURRENT_WORD (LC_COLLATE, _NL_COLLATE_NRULES);
#endif
PATFETCH (c);
c1 = 0;
/* If pattern is `[[='. */
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
for (;;)
{
PATFETCH (c);
if ((c == '=' && *p == ']') || p == pend)
break;
if (c1 < MB_LEN_MAX)
str[c1++] = c;
else
/* This is in any case an invalid class name. */
str[0] = '\0';
}
str[c1] = '\0';
if (c == '=' && *p == ']' && str[0] != '\0')
{
/* If we have no collation data we use the default
collation in which each character is in a class
by itself. It also means that ASCII is the
character set and therefore we cannot have character
with more than one byte in the multibyte
representation. */
#ifdef _LIBC
if (nrules == 0)
#endif
{
if (c1 != 1)
FREE_STACK_RETURN (REG_ECOLLATE);
/* Throw away the ] at the end of the equivalence
class. */
PATFETCH (c);
/* Set the bit for the character. */
SET_LIST_BIT (str[0]);
}
#ifdef _LIBC
else
{
/* Try to match the byte sequence in `str' against
those known to the collate implementation.
First find out whether the bytes in `str' are
actually from exactly one character. */
const int32_t *table;
const unsigned char *weights;
const unsigned char *extra;
const int32_t *indirect;
int32_t idx;
const unsigned char *cp = str;
int ch;
/* This #include defines a local function! */
# include <locale/weight.h>
table = (const int32_t *)
_NL_CURRENT (LC_COLLATE, _NL_COLLATE_TABLEMB);
weights = (const unsigned char *)
_NL_CURRENT (LC_COLLATE, _NL_COLLATE_WEIGHTMB);
extra = (const unsigned char *)
_NL_CURRENT (LC_COLLATE, _NL_COLLATE_EXTRAMB);
indirect = (const int32_t *)
_NL_CURRENT (LC_COLLATE, _NL_COLLATE_INDIRECTMB);
idx = findidx (&cp);
if (idx == 0 || cp < str + c1)
/* This is no valid character. */
FREE_STACK_RETURN (REG_ECOLLATE);
/* Throw away the ] at the end of the equivalence
class. */
PATFETCH (c);
/* Now we have to go throught the whole table
and find all characters which have the same
first level weight.
XXX Note that this is not entirely correct.
we would have to match multibyte sequences
but this is not possible with the current
implementation. */
for (ch = 1; ch < 256; ++ch)
/* XXX This test would have to be changed if we
would allow matching multibyte sequences. */
if (table[ch] > 0)
{
int32_t idx2 = table[ch];
size_t len = weights[idx2];
/* Test whether the lenghts match. */
if (weights[idx] == len)
{
/* They do. New compare the bytes of
the weight. */
size_t cnt = 0;
while (cnt < len
&& (weights[idx + 1 + cnt]
== weights[idx2 + 1 + cnt]))
++len;
if (cnt == len)
/* They match. Mark the character as
acceptable. */
SET_LIST_BIT (ch);
}
}
}
#endif
had_char_class = true;
}
else
{
c1++;
while (c1--)
PATUNFETCH;
SET_LIST_BIT ('[');
SET_LIST_BIT ('=');
range_start = '=';
had_char_class = false;
}
}
else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == '.')
{
unsigned char str[128]; /* Should be large enough. */
#ifdef _LIBC
uint32_t nrules =
_NL_CURRENT_WORD (LC_COLLATE, _NL_COLLATE_NRULES);
#endif
PATFETCH (c);
c1 = 0;
/* If pattern is `[[='. */
if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
for (;;)
{
PATFETCH (c);
if ((c == '.' && *p == ']') || p == pend)
break;
if (c1 < sizeof (str))
str[c1++] = c;
else
/* This is in any case an invalid class name. */
str[0] = '\0';
}
str[c1] = '\0';
if (c == '.' && *p == ']' && str[0] != '\0')
{
/* If we have no collation data we use the default
collation in which each character is the name
for its own class which contains only the one
character. It also means that ASCII is the
character set and therefore we cannot have character
with more than one byte in the multibyte
representation. */
#ifdef _LIBC
if (nrules == 0)
#endif
{
if (c1 != 1)
FREE_STACK_RETURN (REG_ECOLLATE);
/* Throw away the ] at the end of the equivalence
class. */
PATFETCH (c);
/* Set the bit for the character. */
SET_LIST_BIT (str[0]);
range_start = ((const unsigned char *) str)[0];
}
#ifdef _LIBC
else
{
/* Try to match the byte sequence in `str' against
those known to the collate implementation.
First find out whether the bytes in `str' are
actually from exactly one character. */
int32_t table_size;
const int32_t *symb_table;
const unsigned char *extra;
int32_t idx;
int32_t elem;
int32_t second;
int32_t hash;
table_size =
_NL_CURRENT_WORD (LC_COLLATE,
_NL_COLLATE_SYMB_HASH_SIZEMB);
symb_table = (const int32_t *)
_NL_CURRENT (LC_COLLATE,
_NL_COLLATE_SYMB_TABLEMB);
extra = (const unsigned char *)
_NL_CURRENT (LC_COLLATE,
_NL_COLLATE_SYMB_EXTRAMB);
/* Locate the character in the hashing table. */
hash = elem_hash (str, c1);
idx = 0;
elem = hash % table_size;
second = hash % (table_size - 2);
while (symb_table[2 * elem] != 0)
{
/* First compare the hashing value. */
if (symb_table[2 * elem] == hash
&& c1 == extra[symb_table[2 * elem + 1]]
&& memcmp (str,
&extra[symb_table[2 * elem + 1]
+ 1],
c1) == 0)
{
/* Yep, this is the entry. */
idx = symb_table[2 * elem + 1];
idx += 1 + extra[idx];
break;
}
/* Next entry. */
elem += second;
}
if (symb_table[2 * elem] == 0)
/* This is no valid character. */
FREE_STACK_RETURN (REG_ECOLLATE);
/* Throw away the ] at the end of the equivalence
class. */
PATFETCH (c);
/* Now add the multibyte character(s) we found
to the accept list.
XXX Note that this is not entirely correct.
we would have to match multibyte sequences
but this is not possible with the current
implementation. Also, we have to match
collating symbols, which expand to more than
one file, as a whole and not allow the
individual bytes. */
c1 = extra[idx++];
if (c1 == 1)
range_start = extra[idx];
while (c1-- > 0)
{
SET_LIST_BIT (extra[idx]);
++idx;
}
}
#endif
had_char_class = false;
}
else
{
c1++;
while (c1--)
PATUNFETCH;
SET_LIST_BIT ('[');
SET_LIST_BIT ('.');
range_start = '.';
had_char_class = false;
}
}
else
{
had_char_class = false;
SET_LIST_BIT (c);
range_start = c;
}
}
/* Discard any (non)matching list bytes that are all 0 at the
end of the map. Decrease the map-length byte too. */
while ((int) b[-1] > 0 && b[b[-1] - 1] == 0)
b[-1]--;
b += b[-1];
}
break;
case '(':
if (syntax & RE_NO_BK_PARENS)
goto handle_open;
else
goto normal_char;
case ')':
if (syntax & RE_NO_BK_PARENS)
goto handle_close;
else
goto normal_char;
case '\n':
if (syntax & RE_NEWLINE_ALT)
goto handle_alt;
else
goto normal_char;
case '|':
if (syntax & RE_NO_BK_VBAR)
goto handle_alt;
else
goto normal_char;
case '{':
if (syntax & RE_INTERVALS && syntax & RE_NO_BK_BRACES)
goto handle_interval;
else
goto normal_char;
case '\\':
if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
/* Do not translate the character after the \, so that we can
distinguish, e.g., \B from \b, even if we normally would
translate, e.g., B to b. */
PATFETCH_RAW (c);
switch (c)
{
case '(':
if (syntax & RE_NO_BK_PARENS)
goto normal_backslash;
handle_open:
bufp->re_nsub++;
regnum++;
if (COMPILE_STACK_FULL)
{
RETALLOC (compile_stack.stack, compile_stack.size << 1,
compile_stack_elt_t);
if (compile_stack.stack == NULL) return REG_ESPACE;
compile_stack.size <<= 1;
}
/* These are the values to restore when we hit end of this
group. They are all relative offsets, so that if the
whole pattern moves because of realloc, they will still
be valid. */
COMPILE_STACK_TOP.begalt_offset = begalt - bufp->buffer;
COMPILE_STACK_TOP.fixup_alt_jump
= fixup_alt_jump ? fixup_alt_jump - bufp->buffer + 1 : 0;
COMPILE_STACK_TOP.laststart_offset = b - bufp->buffer;
COMPILE_STACK_TOP.regnum = regnum;
/* We will eventually replace the 0 with the number of
groups inner to this one. But do not push a
start_memory for groups beyond the last one we can
represent in the compiled pattern. */
if (regnum <= MAX_REGNUM)
{
COMPILE_STACK_TOP.inner_group_offset = b - bufp->buffer + 2;
BUF_PUSH_3 (start_memory, regnum, 0);
}
compile_stack.avail++;
fixup_alt_jump = 0;
laststart = 0;
begalt = b;
/* If we've reached MAX_REGNUM groups, then this open
won't actually generate any code, so we'll have to
clear pending_exact explicitly. */
pending_exact = 0;
break;
case ')':
if (syntax & RE_NO_BK_PARENS) goto normal_backslash;
if (COMPILE_STACK_EMPTY)
{
if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
goto normal_backslash;
else
FREE_STACK_RETURN (REG_ERPAREN);
}
handle_close:
if (fixup_alt_jump)
{ /* Push a dummy failure point at the end of the
alternative for a possible future
`pop_failure_jump' to pop. See comments at
`push_dummy_failure' in `re_match_2'. */
BUF_PUSH (push_dummy_failure);
/* We allocated space for this jump when we assigned
to `fixup_alt_jump', in the `handle_alt' case below. */
STORE_JUMP (jump_past_alt, fixup_alt_jump, b - 1);
}
/* See similar code for backslashed left paren above. */
if (COMPILE_STACK_EMPTY)
{
if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
goto normal_char;
else
FREE_STACK_RETURN (REG_ERPAREN);
}
/* Since we just checked for an empty stack above, this
``can't happen''. */
assert (compile_stack.avail != 0);
{
/* We don't just want to restore into `regnum', because
later groups should continue to be numbered higher,
as in `(ab)c(de)' -- the second group is #2. */
regnum_t this_group_regnum;
compile_stack.avail--;
begalt = bufp->buffer + COMPILE_STACK_TOP.begalt_offset;
fixup_alt_jump
= COMPILE_STACK_TOP.fixup_alt_jump
? bufp->buffer + COMPILE_STACK_TOP.fixup_alt_jump - 1
: 0;
laststart = bufp->buffer + COMPILE_STACK_TOP.laststart_offset;
this_group_regnum = COMPILE_STACK_TOP.regnum;
/* If we've reached MAX_REGNUM groups, then this open
won't actually generate any code, so we'll have to
clear pending_exact explicitly. */
pending_exact = 0;
/* We're at the end of the group, so now we know how many
groups were inside this one. */
if (this_group_regnum <= MAX_REGNUM)
{
unsigned char *inner_group_loc
= bufp->buffer + COMPILE_STACK_TOP.inner_group_offset;
*inner_group_loc = regnum - this_group_regnum;
BUF_PUSH_3 (stop_memory, this_group_regnum,
regnum - this_group_regnum);
}
}
break;
case '|': /* `\|'. */
if (syntax & RE_LIMITED_OPS || syntax & RE_NO_BK_VBAR)
goto normal_backslash;
handle_alt:
if (syntax & RE_LIMITED_OPS)
goto normal_char;
/* Insert before the previous alternative a jump which
jumps to this alternative if the former fails. */
GET_BUFFER_SPACE (3);
INSERT_JUMP (on_failure_jump, begalt, b + 6);
pending_exact = 0;
b += 3;
/* The alternative before this one has a jump after it
which gets executed if it gets matched. Adjust that
jump so it will jump to this alternative's analogous
jump (put in below, which in turn will jump to the next
(if any) alternative's such jump, etc.). The last such
jump jumps to the correct final destination. A picture:
_____ _____
| | | |
| v | v
a | b | c
If we are at `b', then fixup_alt_jump right now points to a
three-byte space after `a'. We'll put in the jump, set
fixup_alt_jump to right after `b', and leave behind three
bytes which we'll fill in when we get to after `c'. */
if (fixup_alt_jump)
STORE_JUMP (jump_past_alt, fixup_alt_jump, b);
/* Mark and leave space for a jump after this alternative,
to be filled in later either by next alternative or
when know we're at the end of a series of alternatives. */
fixup_alt_jump = b;
GET_BUFFER_SPACE (3);
b += 3;
laststart = 0;
begalt = b;
break;
case '{':
/* If \{ is a literal. */
if (!(syntax & RE_INTERVALS)
/* If we're at `\{' and it's not the open-interval
operator. */
|| (syntax & RE_NO_BK_BRACES))
goto normal_backslash;
handle_interval:
{
/* If got here, then the syntax allows intervals. */
/* At least (most) this many matches must be made. */
int lower_bound = -1, upper_bound = -1;
beg_interval = p - 1;
if (p == pend)
{
if (!(syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
goto unfetch_interval;
else
FREE_STACK_RETURN (REG_EBRACE);
}
GET_UNSIGNED_NUMBER (lower_bound);
if (c == ',')
{
GET_UNSIGNED_NUMBER (upper_bound);
if ((!(syntax & RE_NO_BK_BRACES) && c != '\\')
|| ((syntax & RE_NO_BK_BRACES) && c != '}'))
FREE_STACK_RETURN (REG_BADBR);
if (upper_bound < 0)
upper_bound = RE_DUP_MAX;
}
else
/* Interval such as `{1}' => match exactly once. */
upper_bound = lower_bound;
if (lower_bound < 0 || upper_bound > RE_DUP_MAX
|| lower_bound > upper_bound)
{
if (!(syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
goto unfetch_interval;
else
FREE_STACK_RETURN (REG_BADBR);
}
if (!(syntax & RE_NO_BK_BRACES))
{
if (c != '\\') FREE_STACK_RETURN (REG_EBRACE);
PATFETCH (c);
}
if (c != '}')
{
if (!(syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
goto unfetch_interval;
else
FREE_STACK_RETURN (REG_BADBR);
}
/* We just parsed a valid interval. */
/* If it's invalid to have no preceding re. */
if (!laststart)
{
if (syntax & RE_CONTEXT_INVALID_OPS)
FREE_STACK_RETURN (REG_BADRPT);
else if (syntax & RE_CONTEXT_INDEP_OPS)
laststart = b;
else
goto unfetch_interval;
}
/* If the upper bound is zero, don't want to succeed at
all; jump from `laststart' to `b + 3', which will be
the end of the buffer after we insert the jump. */
if (upper_bound == 0)
{
GET_BUFFER_SPACE (3);
INSERT_JUMP (jump, laststart, b + 3);
b += 3;
}
/* Otherwise, we have a nontrivial interval. When
we're all done, the pattern will look like:
set_number_at <jump count> <upper bound>
set_number_at <succeed_n count> <lower bound>
succeed_n <after jump addr> <succeed_n count>
<body of loop>
jump_n <succeed_n addr> <jump count>
(The upper bound and `jump_n' are omitted if
`upper_bound' is 1, though.) */
else
{ /* If the upper bound is > 1, we need to insert
more at the end of the loop. */
unsigned nbytes = 10 + (upper_bound > 1) * 10;
GET_BUFFER_SPACE (nbytes);
/* Initialize lower bound of the `succeed_n', even
though it will be set during matching by its
attendant `set_number_at' (inserted next),
because `re_compile_fastmap' needs to know.
Jump to the `jump_n' we might insert below. */
INSERT_JUMP2 (succeed_n, laststart,
b + 5 + (upper_bound > 1) * 5,
lower_bound);
b += 5;
/* Code to initialize the lower bound. Insert
before the `succeed_n'. The `5' is the last two
bytes of this `set_number_at', plus 3 bytes of
the following `succeed_n'. */
insert_op2 (set_number_at, laststart, 5, lower_bound, b);
b += 5;
if (upper_bound > 1)
{ /* More than one repetition is allowed, so
append a backward jump to the `succeed_n'
that starts this interval.
When we've reached this during matching,
we'll have matched the interval once, so
jump back only `upper_bound - 1' times. */
STORE_JUMP2 (jump_n, b, laststart + 5,
upper_bound - 1);
b += 5;
/* The location we want to set is the second
parameter of the `jump_n'; that is `b-2' as
an absolute address. `laststart' will be
the `set_number_at' we're about to insert;
`laststart+3' the number to set, the source
for the relative address. But we are
inserting into the middle of the pattern --
so everything is getting moved up by 5.
Conclusion: (b - 2) - (laststart + 3) + 5,
i.e., b - laststart.
We insert this at the beginning of the loop
so that if we fail during matching, we'll
reinitialize the bounds. */
insert_op2 (set_number_at, laststart, b - laststart,
upper_bound - 1, b);
b += 5;
}
}
pending_exact = 0;
beg_interval = NULL;
}
break;
unfetch_interval:
/* If an invalid interval, match the characters as literals. */
assert (beg_interval);
p = beg_interval;
beg_interval = NULL;
/* normal_char and normal_backslash need `c'. */
PATFETCH (c);
if (!(syntax & RE_NO_BK_BRACES))
{
if (p > pattern && p[-1] == '\\')
goto normal_backslash;
}
goto normal_char;
#ifdef emacs
/* There is no way to specify the before_dot and after_dot
operators. rms says this is ok. --karl */
case '=':
BUF_PUSH (at_dot);
break;
case 's':
laststart = b;
PATFETCH (c);
BUF_PUSH_2 (syntaxspec, syntax_spec_code[c]);
break;
case 'S':
laststart = b;
PATFETCH (c);
BUF_PUSH_2 (notsyntaxspec, syntax_spec_code[c]);
break;
#endif /* emacs */
case 'w':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
laststart = b;
BUF_PUSH (wordchar);
break;
case 'W':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
laststart = b;
BUF_PUSH (notwordchar);
break;
case '<':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (wordbeg);
break;
case '>':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (wordend);
break;
case 'b':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (wordbound);
break;
case 'B':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (notwordbound);
break;
case '`':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (begbuf);
break;
case '\'':
if (syntax & RE_NO_GNU_OPS)
goto normal_char;
BUF_PUSH (endbuf);
break;
case '1': case '2': case '3': case '4': case '5':
case '6': case '7': case '8': case '9':
if (syntax & RE_NO_BK_REFS)
goto normal_char;
c1 = c - '0';
if (c1 > regnum)
FREE_STACK_RETURN (REG_ESUBREG);
/* Can't back reference to a subexpression if inside of it. */
if (group_in_compile_stack (compile_stack, (regnum_t) c1))
goto normal_char;
laststart = b;
BUF_PUSH_2 (duplicate, c1);
break;
case '+':
case '?':
if (syntax & RE_BK_PLUS_QM)
goto handle_plus;
else
goto normal_backslash;
default:
normal_backslash:
/* You might think it would be useful for \ to mean
not to translate; but if we don't translate it
it will never match anything. */
c = TRANSLATE (c);
goto normal_char;
}
break;
default:
/* Expects the character in `c'. */
normal_char: