| # Modify as you see fit, note this is built into crda, |
| # so if you change it here you will have to change crda.c |
| REG_BIN?=/usr/lib/crda/regulatory.bin |
| REG_GIT?=git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git |
| |
| PREFIX ?= /usr/ |
| MANDIR ?= $(PREFIX)/share/man/ |
| |
| SBINDIR ?= /sbin/ |
| |
| # Use a custom CRDA_UDEV_LEVEL when callling make install to |
| # change your desired level for the udev regulatory.rules |
| CRDA_UDEV_LEVEL?=85 |
| UDEV_LEVEL=$(CRDA_UDEV_LEVEL)- |
| # You can customize this if your distributions uses |
| # a different location. |
| UDEV_RULE_DIR?=/lib/udev/rules.d/ |
| |
| # If your distribution requires a custom pubkeys dir |
| # you must update this variable to reflect where the |
| # keys are put when building. For example you can run |
| # with make PUBKEY_DIR=/usr/lib/crda/pubkeys |
| PUBKEY_DIR?=pubkeys |
| RUNTIME_PUBKEY_DIR?=/etc/wireless-regdb/pubkeys |
| |
| CFLAGS += -Wall -g |
| |
| all: all_noverify verify |
| |
| all_noverify: crda intersect regdbdump |
| |
| ifeq ($(USE_OPENSSL),1) |
| CFLAGS += -DUSE_OPENSSL -DPUBKEY_DIR=\"$(RUNTIME_PUBKEY_DIR)\" `pkg-config --cflags openssl` |
| LDLIBS += `pkg-config --libs openssl` |
| |
| reglib.o: keys-ssl.c |
| |
| else |
| CFLAGS += $(GCRYPTCFLAGS) -DUSE_GCRYPT |
| LDLIBS += $(GCRYPTLDFLAGS) -lgcrypt |
| |
| reglib.o: keys-gcrypt.c |
| |
| endif |
| MKDIR ?= mkdir -p |
| INSTALL ?= install |
| |
| ifdef NLLIBNAME |
| |
| NLLIBS += -lnl |
| |
| ifeq ($(NLLIBNAME),libnl-1) |
| NL1FOUND := Y |
| endif |
| |
| ifeq ($(NLLIBNAME),libnl-2.0) |
| NL2FOUND := Y |
| endif |
| |
| ifeq ($(NLLIBNAME),libnl-3.0) |
| NL3FOUND := Y |
| endif |
| |
| ifdef NLCFLAGS |
| CFLAGS += $(NLCFLAGS) |
| endif |
| |
| ifdef NLLDFLAGS |
| LDFLAGS += $(NLLDFLAGS) |
| endif |
| |
| else |
| NL1FOUND := $(shell $(PKG_CONFIG) --atleast-version=1 libnl-1 && echo Y) |
| NL2FOUND := $(shell $(PKG_CONFIG) --atleast-version=2 libnl-2.0 && echo Y) |
| NL3FOUND := $(shell $(PKG_CONFIG) --atleast-version=3 libnl-3.0 && echo Y) |
| |
| ifeq ($(NL1FOUND),Y) |
| NLLIBNAME = libnl-1 |
| endif |
| |
| ifeq ($(NL2FOUND),Y) |
| NLLIBNAME = libnl-2.0 |
| endif |
| |
| ifeq ($(NL3FOUND),Y) |
| NLLIBNAME = libnl-3.0 |
| endif |
| |
| ifeq ($(NLLIBNAME),) |
| $(error Cannot find development files for any supported version of libnl) |
| endif |
| |
| NLLIBS += $(shell $(PKG_CONFIG) --libs $(NLLIBNAME)) |
| CFLAGS += $(shell $(PKG_CONFIG) --cflags $(NLLIBNAME)) |
| endif |
| |
| ifeq ($(NL2FOUND),Y) |
| CFLAGS += -DCONFIG_LIBNL20 |
| NLLIBS += -lnl-genl |
| endif |
| |
| ifeq ($(NL3FOUND),Y) |
| CFLAGS += -DCONFIG_LIBNL30 |
| NLLIBS += -lnl-genl |
| endif |
| |
| ifeq ($(V),1) |
| Q= |
| NQ=@true |
| else |
| Q=@ |
| NQ=@echo |
| endif |
| |
| $(REG_BIN): |
| $(NQ) ' EXIST ' $(REG_BIN) |
| $(NQ) |
| $(NQ) ERROR: The file: $(REG_BIN) is missing. You need this in place in order |
| $(NQ) to verify CRDA. You can get it from: |
| $(NQ) |
| $(NQ) $(REG_GIT) |
| $(NQ) |
| $(NQ) "Once cloned (no need to build) cp regulatory.bin to $(REG_BIN)" |
| $(NQ) "Use \"make noverify\" to disable verification" |
| $(NQ) |
| $(Q) exit 1 |
| |
| keys-%.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem) |
| $(NQ) ' GEN ' $@ |
| $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem) |
| $(Q)./utils/key2pub.py --$* $(wildcard $(PUBKEY_DIR)/*.pem) $@ |
| |
| %.o: %.c regdb.h |
| $(NQ) ' CC ' $@ |
| $(Q)$(CC) -c $(CPPFLAGS) $(CFLAGS) -o $@ $< |
| |
| crda: reglib.o crda.o |
| $(NQ) ' LD ' $@ |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) $(NLLIBS) |
| |
| regdbdump: reglib.o regdbdump.o print-regdom.o |
| $(NQ) ' LD ' $@ |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) |
| |
| intersect: reglib.o intersect.o print-regdom.o |
| $(NQ) ' LD ' $@ |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) |
| |
| verify: $(REG_BIN) regdbdump |
| $(NQ) ' CHK $(REG_BIN)' |
| $(Q)./regdbdump $(REG_BIN) >/dev/null |
| |
| %.gz: % |
| @$(NQ) ' GZIP' $< |
| $(Q)gzip < $< > $@ |
| |
| install: crda crda.8.gz regdbdump.8.gz |
| $(NQ) ' INSTALL crda' |
| $(Q)$(MKDIR) $(DESTDIR)/$(SBINDIR) |
| $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) crda |
| $(NQ) ' INSTALL regdbdump' |
| $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) regdbdump |
| $(NQ) ' INSTALL $(UDEV_LEVEL)regulatory.rules' |
| $(Q)$(MKDIR) $(DESTDIR)/$(UDEV_RULE_DIR)/ |
| @# This removes the old rule you may have, we were not |
| @# putting it in the right place. |
| $(Q)rm -f $(DESTDIR)/etc/udev/rules.d/regulatory.rules |
| $(Q)sed 's:$$(SBINDIR):$(SBINDIR):' udev/regulatory.rules > udev/regulatory.rules.parsed |
| $(Q)ln -sf regulatory.rules.parsed udev/$(UDEV_LEVEL)regulatory.rules |
| $(Q)$(INSTALL) -m 644 -t \ |
| $(DESTDIR)/$(UDEV_RULE_DIR)/ \ |
| udev/$(UDEV_LEVEL)regulatory.rules |
| $(NQ) ' INSTALL crda.8.gz' |
| $(Q)$(MKDIR) $(DESTDIR)$(MANDIR)/man8/ |
| $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ crda.8.gz |
| $(NQ) ' INSTALL regdbdump.8.gz' |
| $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ regdbdump.8.gz |
| |
| clean: |
| $(Q)rm -f crda regdbdump intersect *.o *~ *.pyc keys-*.c *.gz \ |
| udev/$(UDEV_LEVEL)regulatory.rules udev/regulatory.rules.parsed |
