| What: /sys/class/net/<mesh_iface>/mesh/aggregated_ogms | |
| Date: May 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Indicates whether the batman protocol messages of the | |
| mesh <mesh_iface> shall be aggregated or not. | |
| What: /sys/class/net/<mesh_iface>/mesh/ap_isolation | |
| Date: May 2011 | |
| Contact: Antonio Quartulli <ordex@autistici.org> | |
| Description: | |
| Indicates whether the data traffic going from a | |
| wireless client to another wireless client will be | |
| silently dropped. | |
| What: /sys/class/net/<mesh_iface>/mesh/bonding | |
| Date: June 2010 | |
| Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> | |
| Description: | |
| Indicates whether the data traffic going through the | |
| mesh will be sent using multiple interfaces at the | |
| same time (if available). | |
| What: /sys/class/net/<mesh_iface>/mesh/bridge_loop_avoidance | |
| Date: November 2011 | |
| Contact: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> | |
| Description: | |
| Indicates whether the bridge loop avoidance feature | |
| is enabled. This feature detects and avoids loops | |
| between the mesh and devices bridged with the soft | |
| interface <mesh_iface>. | |
| What: /sys/class/net/<mesh_iface>/mesh/fragmentation | |
| Date: October 2010 | |
| Contact: Andreas Langer <an.langer@gmx.de> | |
| Description: | |
| Indicates whether the data traffic going through the | |
| mesh will be fragmented or silently discarded if the | |
| packet size exceeds the outgoing interface MTU. | |
| What: /sys/class/net/<mesh_iface>/mesh/gw_bandwidth | |
| Date: October 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Defines the bandwidth which is propagated by this | |
| node if gw_mode was set to 'server'. | |
| What: /sys/class/net/<mesh_iface>/mesh/gw_mode | |
| Date: October 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Defines the state of the gateway features. Can be | |
| either 'off', 'client' or 'server'. | |
| What: /sys/class/net/<mesh_iface>/mesh/gw_sel_class | |
| Date: October 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Defines the selection criteria this node will use | |
| to choose a gateway if gw_mode was set to 'client'. | |
| What: /sys/class/net/<mesh_iface>/mesh/hop_penalty | |
| Date: Oct 2010 | |
| Contact: Linus LΓΌssing <linus.luessing@web.de> | |
| Description: | |
| Defines the penalty which will be applied to an | |
| originator message's tq-field on every hop. | |
| What: /sys/class/net/<mesh_iface>/mesh/network_coding | |
| Date: Nov 2012 | |
| Contact: Martin Hundeboll <martin@hundeboll.net> | |
| Description: | |
| Controls whether Network Coding (using some magic | |
| to send fewer wifi packets but still the same | |
| content) is enabled or not. | |
| What: /sys/class/net/<mesh_iface>/mesh/orig_interval | |
| Date: May 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Defines the interval in milliseconds in which batman | |
| sends its protocol messages. | |
| What: /sys/class/net/<mesh_iface>/mesh/routing_algo | |
| Date: Dec 2011 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Defines the routing procotol this mesh instance | |
| uses to find the optimal paths through the mesh. | |
| What: /sys/class/net/<mesh_iface>/mesh/vis_mode | |
| Date: May 2010 | |
| Contact: Marek Lindner <lindner_marek@yahoo.de> | |
| Description: | |
| Each batman node only maintains information about its | |
| own local neighborhood, therefore generating graphs | |
| showing the topology of the entire mesh is not easily | |
| feasible without having a central instance to collect | |
| the local topologies from all nodes. This file allows | |
| to activate the collecting (server) mode. |