| # | |
| # 8390 device configuration | |
| # | |
| config NET_VENDOR_8390 | |
| bool "National Semi-conductor 8390 devices" | |
| default y | |
| depends on NET_VENDOR_NATSEMI | |
| ---help--- | |
| If you have a network (Ethernet) card belonging to this class, say Y | |
| and read the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. | |
| Note that the answer to this question doesn't directly affect the | |
| kernel: saying N will just cause the configurator to skip all | |
| the questions about Western Digital cards. If you say Y, you will be | |
| asked for your specific card in the following questions. | |
| if NET_VENDOR_8390 | |
| config PCMCIA_AXNET | |
| tristate "Asix AX88190 PCMCIA support" | |
| depends on PCMCIA | |
| ---help--- | |
| Say Y here if you intend to attach an Asix AX88190-based PCMCIA | |
| (PC-card) Fast Ethernet card to your computer. These cards are | |
| nearly NE2000 compatible but need a separate driver due to a few | |
| misfeatures. | |
| To compile this driver as a module, choose M here: the module will be | |
| called axnet_cs. If unsure, say N. | |
| config AX88796 | |
| tristate "ASIX AX88796 NE2000 clone support" | |
| depends on (ARM || MIPS || SUPERH) | |
| select CRC32 | |
| select PHYLIB | |
| select MDIO_BITBANG | |
| ---help--- | |
| AX88796 driver, using platform bus to provide | |
| chip detection and resources | |
| config AX88796_93CX6 | |
| bool "ASIX AX88796 external 93CX6 eeprom support" | |
| depends on AX88796 | |
| select EEPROM_93CX6 | |
| ---help--- | |
| Select this if your platform comes with an external 93CX6 eeprom. | |
| config HYDRA | |
| tristate "Hydra support" | |
| depends on ZORRO | |
| select CRC32 | |
| ---help--- | |
| If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. | |
| To compile this driver as a module, choose M here: the module | |
| will be called hydra. | |
| config ARM_ETHERH | |
| tristate "I-cubed EtherH/ANT EtherM support" | |
| depends on ARM && ARCH_ACORN | |
| select CRC32 | |
| ---help--- | |
| If you have an Acorn system with one of these network cards, you | |
| should say Y to this option if you wish to use it with Linux. | |
| config MAC8390 | |
| bool "Macintosh NS 8390 based ethernet cards" | |
| depends on MAC | |
| select CRC32 | |
| ---help--- | |
| If you want to include a driver to support Nubus or LC-PDS | |
| Ethernet cards using an NS8390 chipset or its equivalent, say Y | |
| and read the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. | |
| config MCF8390 | |
| tristate "ColdFire NS8390 based Ethernet support" | |
| depends on COLDFIRE | |
| select CRC32 | |
| ---help--- | |
| This driver is for Ethernet devices using an NS8390-compatible | |
| chipset on many common ColdFire CPU based boards. Many of the older | |
| Freescale dev boards use this, and some other common boards like | |
| some SnapGear routers do as well. | |
| If you have one of these boards and want to use the network interface | |
| on them then choose Y. To compile this driver as a module, choose M | |
| here, the module will be called mcf8390. | |
| config NE2000 | |
| tristate "NE2000/NE1000 support" | |
| depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) | |
| select CRC32 | |
| ---help--- | |
| If you have a network (Ethernet) card of this type, say Y and read | |
| the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. Many Ethernet cards | |
| without a specific driver are compatible with NE2000. | |
| If you have a PCI NE2000 card however, say N here and Y to "PCI | |
| NE2000 and clone support" below. | |
| To compile this driver as a module, choose M here. The module | |
| will be called ne. | |
| config NE2K_PCI | |
| tristate "PCI NE2000 and clones support (see help)" | |
| depends on PCI | |
| select CRC32 | |
| ---help--- | |
| This driver is for NE2000 compatible PCI cards. It will not work | |
| with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 | |
| support" below). If you have a PCI NE2000 network (Ethernet) card, | |
| say Y and read the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. | |
| This driver also works for the following NE2000 clone cards: | |
| RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 | |
| NetVin NV5000SC Via 86C926 SureCom NE34 Winbond | |
| Holtek HT80232 Holtek HT80229 | |
| To compile this driver as a module, choose M here. The module | |
| will be called ne2k-pci. | |
| config APNE | |
| tristate "PCMCIA NE2000 support" | |
| depends on AMIGA_PCMCIA | |
| select CRC32 | |
| ---help--- | |
| If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, | |
| say N. | |
| To compile this driver as a module, choose M here: the module | |
| will be called apne. | |
| config PCMCIA_PCNET | |
| tristate "NE2000 compatible PCMCIA support" | |
| depends on PCMCIA | |
| select CRC32 | |
| ---help--- | |
| Say Y here if you intend to attach an NE2000 compatible PCMCIA | |
| (PC-card) Ethernet or Fast Ethernet card to your computer. | |
| To compile this driver as a module, choose M here: the module will be | |
| called pcnet_cs. If unsure, say N. | |
| config NE_H8300 | |
| tristate "NE2000 compatible support for H8/300" | |
| depends on H8300 | |
| ---help--- | |
| Say Y here if you want to use the NE2000 compatible | |
| controller on the Renesas H8/300 processor. | |
| config STNIC | |
| tristate "National DP83902AV support" | |
| depends on SUPERH | |
| select CRC32 | |
| ---help--- | |
| Support for cards based on the National Semiconductor DP83902AV | |
| ST-NIC Serial Network Interface Controller for Twisted Pair. This | |
| is a 10Mbit/sec Ethernet controller. Product overview and specs at | |
| <http://www.national.com/pf/DP/DP83902A.html>. | |
| If unsure, say N. | |
| config ULTRA | |
| tristate "SMC Ultra support" | |
| depends on ISA | |
| select CRC32 | |
| ---help--- | |
| If you have a network (Ethernet) card of this type, say Y and read | |
| the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. | |
| Important: There have been many reports that, with some motherboards | |
| mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, | |
| such as some BusLogic models) causes corruption problems with many | |
| operating systems. The Linux smc-ultra driver has a work-around for | |
| this but keep it in mind if you have such a SCSI card and have | |
| problems. | |
| To compile this driver as a module, choose M here. The module | |
| will be called smc-ultra. | |
| config WD80x3 | |
| tristate "WD80*3 support" | |
| depends on ISA | |
| select CRC32 | |
| ---help--- | |
| If you have a network (Ethernet) card of this type, say Y and read | |
| the Ethernet-HOWTO, available from | |
| <http://www.tldp.org/docs.html#howto>. | |
| To compile this driver as a module, choose M here. The module | |
| will be called wd. | |
| config ZORRO8390 | |
| tristate "Zorro NS8390-based Ethernet support" | |
| depends on ZORRO | |
| select CRC32 | |
| ---help--- | |
| This driver is for Zorro Ethernet cards using an NS8390-compatible | |
| chipset, like the Village Tronic Ariadne II and the Individual | |
| Computers X-Surf Ethernet cards. If you have such a card, say Y. | |
| Otherwise, say N. | |
| To compile this driver as a module, choose M here: the module | |
| will be called zorro8390. | |
| endif # NET_VENDOR_8390 |