| /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape Portable Runtime (NSPR). |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998-2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| /*********************************************************************** |
| ** 1996 - Netscape Communications Corporation |
| ** |
| ** Name: accept.c |
| ** |
| ** Description: Run accept() sucessful connection tests. |
| ** |
| ** Modification History: |
| ** 04-Jun-97 AGarcia - Reconvert test file to return a 0 for PASS and a 1 for FAIL |
| ** 13-May-97 AGarcia- Converted the test to accomodate the debug_mode |
| ** The debug mode will print all of the printfs associated with this test. |
| ** The regress mode will be the default mode. Since the regress tool limits |
| ** the output to a one line status:PASS or FAIL,all of the printf statements |
| ** have been handled with an if (debug_mode) statement. |
| ** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to |
| ** recognize the return code from tha main program. |
| ** 12-June-97 Revert to return code 0 and 1. |
| ***********************************************************************/ |
| |
| /*********************************************************************** |
| ** Includes |
| ***********************************************************************/ |
| |
| #include "nspr.h" |
| #include "prpriv.h" |
| |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include "plgetopt.h" |
| #include "plerror.h" |
| |
| #define BASE_PORT 10000 |
| |
| #define CLIENT_DATA 128 |
| |
| #define ACCEPT_NORMAL 0x1 |
| #define ACCEPT_FAST 0x2 |
| #define ACCEPT_READ 0x3 |
| #define ACCEPT_READ_FAST 0x4 |
| #define ACCEPT_READ_FAST_CB 0x5 |
| |
| #define CLIENT_NORMAL 0x1 |
| #define CLIENT_TIMEOUT_ACCEPT 0x2 |
| #define CLIENT_TIMEOUT_SEND 0x3 |
| |
| #define SERVER_MAX_BIND_COUNT 100 |
| |
| #if defined(XP_OS2) || defined(SYMBIAN) |
| #define TIMEOUTSECS 10 |
| #else |
| #define TIMEOUTSECS 2 |
| #endif |
| PRIntervalTime timeoutTime; |
| |
| static PRInt32 count = 1; |
| static PRFileDesc *output; |
| static PRNetAddr serverAddr; |
| static PRThreadScope thread_scope = PR_LOCAL_THREAD; |
| static PRInt32 clientCommand; |
| static PRInt32 iterations; |
| static PRStatus rv; |
| static PRFileDesc *listenSock; |
| static PRFileDesc *clientSock = NULL; |
| static PRNetAddr listenAddr; |
| static PRNetAddr clientAddr; |
| static PRThread *clientThread; |
| static PRNetAddr *raddr; |
| static char buf[4096 + 2*sizeof(PRNetAddr) + 32]; |
| static PRInt32 status; |
| static PRInt32 bytesRead; |
| |
| PRIntn failed_already=0; |
| PRIntn debug_mode; |
| |
| void Test_Assert(const char *msg, const char *file, PRIntn line) |
| { |
| failed_already=1; |
| if (debug_mode) { |
| PR_fprintf(output, "@%s:%d ", file, line); |
| PR_fprintf(output, msg); |
| } |
| } /* Test_Assert */ |
| |
| #define TEST_ASSERT(expr) \ |
| if (!(expr)) Test_Assert(#expr, __FILE__, __LINE__) |
| |
| #ifdef WINNT |
| #define CALLBACK_MAGIC 0x12345678 |
| |
| void timeout_callback(void *magic) |
| { |
| TEST_ASSERT(magic == (void *)CALLBACK_MAGIC); |
| if (debug_mode) |
| PR_fprintf(output, "timeout callback called okay\n"); |
| } |
| #endif |
| |
| |
| static void PR_CALLBACK |
| ClientThread(void *_action) |
| { |
| PRInt32 action = * (PRInt32 *) _action; |
| PRInt32 iterations = count; |
| PRFileDesc *sock = NULL; |
| |
| serverAddr.inet.family = PR_AF_INET; |
| serverAddr.inet.port = listenAddr.inet.port; |
| serverAddr.inet.ip = PR_htonl(PR_INADDR_LOOPBACK); |
| |
| for (; iterations--;) { |
| PRInt32 rv; |
| char buf[CLIENT_DATA]; |
| |
| memset(buf, 0xaf, sizeof(buf)); /* initialize with arbitrary data */ |
| sock = PR_NewTCPSocket(); |
| if (!sock) { |
| if (!debug_mode) |
| failed_already=1; |
| else |
| PR_fprintf(output, "client: unable to create socket\n"); |
| return; |
| } |
| |
| if (action != CLIENT_TIMEOUT_ACCEPT) { |
| |
| if ((rv = PR_Connect(sock, &serverAddr, |
| timeoutTime)) < 0) { |
| if (!debug_mode) |
| failed_already=1; |
| else |
| PR_fprintf(output, |
| "client: unable to connect to server (%ld, %ld, %ld, %ld)\n", |
| iterations, rv, PR_GetError(), PR_GetOSError()); |
| goto ErrorExit; |
| } |
| |
| if (action != CLIENT_TIMEOUT_SEND) { |
| if ((rv = PR_Send(sock, buf, CLIENT_DATA, |
| 0, timeoutTime))< 0) { |
| if (!debug_mode) |
| failed_already=1; |
| else |
| PR_fprintf(output, |
| "client: unable to send to server (%d, %ld, %ld)\n", |
| CLIENT_DATA, rv, PR_GetError()); |
| goto ErrorExit; |
| } |
| } else { |
| PR_Sleep(PR_SecondsToInterval(TIMEOUTSECS + 1)); |
| } |
| } else { |
| PR_Sleep(PR_SecondsToInterval(TIMEOUTSECS + 1)); |
| } |
| if (debug_mode) |
| PR_fprintf(output, "."); |
| PR_Close(sock); |
| sock = NULL; |
| } |
| if (debug_mode) |
| PR_fprintf(output, "\n"); |
| |
| ErrorExit: |
| if (sock != NULL) |
| PR_Close(sock); |
| } |
| |
| |
| static void |
| RunTest(PRInt32 acceptType, PRInt32 clientAction) |
| { |
| int i; |
| |
| /* First bind to the socket */ |
| listenSock = PR_NewTCPSocket(); |
| if (!listenSock) { |
| failed_already=1; |
| if (debug_mode) |
| PR_fprintf(output, "unable to create listen socket\n"); |
| return; |
| } |
| memset(&listenAddr, 0 , sizeof(listenAddr)); |
| listenAddr.inet.family = PR_AF_INET; |
| listenAddr.inet.port = PR_htons(BASE_PORT); |
| listenAddr.inet.ip = PR_htonl(PR_INADDR_ANY); |
| /* |
| * try a few times to bind server's address, if addresses are in |
| * use |
| */ |
| i = 0; |
| while (PR_Bind(listenSock, &listenAddr) == PR_FAILURE) { |
| if (PR_GetError() == PR_ADDRESS_IN_USE_ERROR) { |
| listenAddr.inet.port += 2; |
| if (i++ < SERVER_MAX_BIND_COUNT) |
| continue; |
| } |
| failed_already=1; |
| if (debug_mode) |
| PR_fprintf(output,"accept: ERROR - PR_Bind failed\n"); |
| return; |
| } |
| |
| |
| rv = PR_Listen(listenSock, 100); |
| if (rv == PR_FAILURE) { |
| failed_already=1; |
| if (debug_mode) |
| PR_fprintf(output, "unable to listen\n"); |
| return; |
| } |
| |
| clientCommand = clientAction; |
| clientThread = PR_CreateThread(PR_USER_THREAD, ClientThread, |
| (void *)&clientCommand, PR_PRIORITY_NORMAL, thread_scope, |
| PR_JOINABLE_THREAD, 0); |
| if (!clientThread) { |
| failed_already=1; |
| if (debug_mode) |
| PR_fprintf(output, "error creating client thread\n"); |
| return; |
| } |
| |
| iterations = count; |
| for (;iterations--;) { |
| switch (acceptType) { |
| case ACCEPT_NORMAL: |
| clientSock = PR_Accept(listenSock, &clientAddr, |
| timeoutTime); |
| switch(clientAction) { |
| case CLIENT_TIMEOUT_ACCEPT: |
| TEST_ASSERT(clientSock == 0); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| case CLIENT_NORMAL: |
| TEST_ASSERT(clientSock); |
| bytesRead = PR_Recv(clientSock, |
| buf, CLIENT_DATA, 0, timeoutTime); |
| TEST_ASSERT(bytesRead == CLIENT_DATA); |
| break; |
| case CLIENT_TIMEOUT_SEND: |
| TEST_ASSERT(clientSock); |
| bytesRead = PR_Recv(clientSock, |
| buf, CLIENT_DATA, 0, timeoutTime); |
| TEST_ASSERT(bytesRead == -1); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| } |
| break; |
| case ACCEPT_READ: |
| status = PR_AcceptRead(listenSock, &clientSock, |
| &raddr, buf, CLIENT_DATA, timeoutTime); |
| switch(clientAction) { |
| case CLIENT_TIMEOUT_ACCEPT: |
| /* Invalid test case */ |
| TEST_ASSERT(0); |
| break; |
| case CLIENT_NORMAL: |
| TEST_ASSERT(clientSock); |
| TEST_ASSERT(status == CLIENT_DATA); |
| break; |
| case CLIENT_TIMEOUT_SEND: |
| TEST_ASSERT(status == -1); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| } |
| break; |
| #ifdef WINNT |
| case ACCEPT_FAST: |
| clientSock = PR_NTFast_Accept(listenSock, |
| &clientAddr, timeoutTime); |
| switch(clientAction) { |
| case CLIENT_TIMEOUT_ACCEPT: |
| TEST_ASSERT(clientSock == 0); |
| if (debug_mode) |
| PR_fprintf(output, "PR_GetError is %ld\n", PR_GetError()); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| case CLIENT_NORMAL: |
| TEST_ASSERT(clientSock); |
| bytesRead = PR_Recv(clientSock, |
| buf, CLIENT_DATA, 0, timeoutTime); |
| TEST_ASSERT(bytesRead == CLIENT_DATA); |
| break; |
| case CLIENT_TIMEOUT_SEND: |
| TEST_ASSERT(clientSock); |
| bytesRead = PR_Recv(clientSock, |
| buf, CLIENT_DATA, 0, timeoutTime); |
| TEST_ASSERT(bytesRead == -1); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| } |
| break; |
| break; |
| case ACCEPT_READ_FAST: |
| status = PR_NTFast_AcceptRead(listenSock, |
| &clientSock, &raddr, buf, 4096, timeoutTime); |
| switch(clientAction) { |
| case CLIENT_TIMEOUT_ACCEPT: |
| /* Invalid test case */ |
| TEST_ASSERT(0); |
| break; |
| case CLIENT_NORMAL: |
| TEST_ASSERT(clientSock); |
| TEST_ASSERT(status == CLIENT_DATA); |
| break; |
| case CLIENT_TIMEOUT_SEND: |
| TEST_ASSERT(clientSock == NULL); |
| TEST_ASSERT(status == -1); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| } |
| break; |
| case ACCEPT_READ_FAST_CB: |
| status = PR_NTFast_AcceptRead_WithTimeoutCallback( |
| listenSock, &clientSock, &raddr, buf, 4096, |
| timeoutTime, timeout_callback, (void *)CALLBACK_MAGIC); |
| switch(clientAction) { |
| case CLIENT_TIMEOUT_ACCEPT: |
| /* Invalid test case */ |
| TEST_ASSERT(0); |
| break; |
| case CLIENT_NORMAL: |
| TEST_ASSERT(clientSock); |
| TEST_ASSERT(status == CLIENT_DATA); |
| break; |
| case CLIENT_TIMEOUT_SEND: |
| if (debug_mode) |
| PR_fprintf(output, "clientSock = 0x%8.8lx\n", clientSock); |
| TEST_ASSERT(clientSock == NULL); |
| TEST_ASSERT(status == -1); |
| TEST_ASSERT(PR_GetError() == PR_IO_TIMEOUT_ERROR); |
| break; |
| } |
| break; |
| #endif |
| } |
| if (clientSock != NULL) { |
| PR_Close(clientSock); |
| clientSock = NULL; |
| } |
| } |
| PR_Close(listenSock); |
| |
| PR_JoinThread(clientThread); |
| } |
| |
| |
| void AcceptUpdatedTest(void) |
| { |
| RunTest(ACCEPT_NORMAL, CLIENT_NORMAL); |
| } |
| void AcceptNotUpdatedTest(void) |
| { |
| RunTest(ACCEPT_FAST, CLIENT_NORMAL); |
| } |
| void AcceptReadTest(void) |
| { |
| RunTest(ACCEPT_READ, CLIENT_NORMAL); |
| } |
| void AcceptReadNotUpdatedTest(void) |
| { |
| RunTest(ACCEPT_READ_FAST, CLIENT_NORMAL); |
| } |
| void AcceptReadCallbackTest(void) |
| { |
| RunTest(ACCEPT_READ_FAST_CB, CLIENT_NORMAL); |
| } |
| |
| void TimeoutAcceptUpdatedTest(void) |
| { |
| RunTest(ACCEPT_NORMAL, CLIENT_TIMEOUT_ACCEPT); |
| } |
| void TimeoutAcceptNotUpdatedTest(void) |
| { |
| RunTest(ACCEPT_FAST, CLIENT_TIMEOUT_ACCEPT); |
| } |
| void TimeoutAcceptReadCallbackTest(void) |
| { |
| RunTest(ACCEPT_READ_FAST_CB, CLIENT_TIMEOUT_ACCEPT); |
| } |
| |
| void TimeoutReadUpdatedTest(void) |
| { |
| RunTest(ACCEPT_NORMAL, CLIENT_TIMEOUT_SEND); |
| } |
| void TimeoutReadNotUpdatedTest(void) |
| { |
| RunTest(ACCEPT_FAST, CLIENT_TIMEOUT_SEND); |
| } |
| void TimeoutReadReadTest(void) |
| { |
| RunTest(ACCEPT_READ, CLIENT_TIMEOUT_SEND); |
| } |
| void TimeoutReadReadNotUpdatedTest(void) |
| { |
| RunTest(ACCEPT_READ_FAST, CLIENT_TIMEOUT_SEND); |
| } |
| void TimeoutReadReadCallbackTest(void) |
| { |
| RunTest(ACCEPT_READ_FAST_CB, CLIENT_TIMEOUT_SEND); |
| } |
| |
| /************************************************************************/ |
| |
| static void Measure(void (*func)(void), const char *msg) |
| { |
| PRIntervalTime start, stop; |
| double d; |
| |
| start = PR_IntervalNow(); |
| (*func)(); |
| stop = PR_IntervalNow(); |
| |
| d = (double)PR_IntervalToMicroseconds(stop - start); |
| if (debug_mode) |
| PR_fprintf(output, "%40s: %6.2f usec\n", msg, d / count); |
| |
| } |
| |
| int main(int argc, char **argv) |
| { |
| |
| /* The command line argument: -d is used to determine if the test is being run |
| in debug mode. The regress tool requires only one line output:PASS or FAIL. |
| All of the printfs associated with this test has been handled with a if (debug_mode) |
| test. |
| Usage: test_name [-d] [-c n] |
| */ |
| PLOptStatus os; |
| PLOptState *opt = PL_CreateOptState(argc, argv, "Gdc:"); |
| while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) |
| { |
| if (PL_OPT_BAD == os) continue; |
| switch (opt->option) |
| { |
| case 'G': /* global threads */ |
| thread_scope = PR_GLOBAL_THREAD; |
| break; |
| case 'd': /* debug mode */ |
| debug_mode = 1; |
| break; |
| case 'c': /* loop counter */ |
| count = atoi(opt->value); |
| break; |
| default: |
| break; |
| } |
| } |
| PL_DestroyOptState(opt); |
| |
| PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); |
| output = PR_STDERR; |
| PR_STDIO_INIT(); |
| |
| timeoutTime = PR_SecondsToInterval(TIMEOUTSECS); |
| if (debug_mode) |
| PR_fprintf(output, "\nRun accept() sucessful connection tests\n"); |
| |
| Measure(AcceptUpdatedTest, "PR_Accept()"); |
| Measure(AcceptReadTest, "PR_AcceptRead()"); |
| #ifdef WINNT |
| Measure(AcceptNotUpdatedTest, "PR_NTFast_Accept()"); |
| Measure(AcceptReadNotUpdatedTest, "PR_NTFast_AcceptRead()"); |
| Measure(AcceptReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()"); |
| #endif |
| if (debug_mode) |
| PR_fprintf(output, "\nRun accept() timeout in the accept tests\n"); |
| #ifdef WINNT |
| Measure(TimeoutReadReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()"); |
| #endif |
| Measure(TimeoutReadUpdatedTest, "PR_Accept()"); |
| if (debug_mode) |
| PR_fprintf(output, "\nRun accept() timeout in the read tests\n"); |
| Measure(TimeoutReadReadTest, "PR_AcceptRead()"); |
| #ifdef WINNT |
| Measure(TimeoutReadNotUpdatedTest, "PR_NTFast_Accept()"); |
| Measure(TimeoutReadReadNotUpdatedTest, "PR_NTFast_AcceptRead()"); |
| Measure(TimeoutReadReadCallbackTest, "PR_NTFast_AcceptRead_WithTimeoutCallback()"); |
| #endif |
| PR_fprintf(output, "%s\n", (failed_already) ? "FAIL" : "PASS"); |
| return failed_already; |
| } |
