| /* |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx6sx.dtsi" |
| |
| / { |
| model = "Freescale i.MX6 SoloX Sabre Auto Board"; |
| compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx"; |
| |
| backlight2 { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm4 0 5000000>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| fb-names = "mxs-lcdif1"; |
| }; |
| |
| clocks { |
| codec_osc: anaclk2 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <24576000>; |
| }; |
| }; |
| |
| max7322_reset: max7322-reset { |
| compatible = "gpio-reset"; |
| reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; |
| reset-delay-us = <1>; |
| #reset-cells = <0>; |
| }; |
| |
| csi1_v4l2_cap { |
| compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2"; |
| csi_id = <0>; |
| status = "okay"; |
| }; |
| |
| csi2_v4l2_cap { |
| compatible = "fsl,imx6sx-csi-v4l2", "fsl,imx6sl-csi-v4l2"; |
| csi_id = <1>; |
| status = "okay"; |
| }; |
| |
| hannstar_cabc { |
| compatible = "hannstar,cabc"; |
| |
| lvds0 { |
| gpios = <&max7310_a 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| max7310_reset: max7310-reset { |
| compatible = "gpio-reset"; |
| reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; |
| reset-delay-us = <1>; |
| #reset-cells = <0>; |
| }; |
| |
| memory { |
| reg = <0x80000000 0x80000000>; |
| }; |
| |
| pxp_v4l2_out { |
| compatible = "fsl,imx6sx-pxp-v4l2", "fsl,imx6sl-pxp-v4l2"; |
| status = "okay"; |
| }; |
| |
| regulators { |
| compatible = "simple-bus"; |
| |
| reg_audio: cs42888_supply { |
| compatible = "regulator-fixed"; |
| regulator-name = "cs42888_supply"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| si4763_vio1: vio1_tnr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vio1"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| si4763_vio2: vio2_tnr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vio2"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| si4763_vd: f3v3_tnr { |
| compatible = "regulator-fixed"; |
| regulator-name = "vd"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| si4763_va: f5v_tnr { |
| compatible = "regulator-fixed"; |
| regulator-name = "va"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| reg_lcd_3v3: lcd-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "lcd-3v3"; |
| gpio = <&gpio3 27 0>; |
| enable-active-high; |
| status = "disabled"; |
| }; |
| |
| reg_sd3_vmmc: sd3_vmmc{ |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_SD3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_vref_3v3: regulator@0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_psu_5v: psu_5v0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "PSU-5V0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-boot-on; |
| }; |
| |
| reg_usb_otg1_vbus: usb_otg1_vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 9 0>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: usb_otg2_vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 12 0>; |
| enable-active-high; |
| }; |
| }; |
| |
| sound-cs42888 { |
| compatible = "fsl,imx6-sabreauto-cs42888", |
| "fsl,imx-audio-cs42888"; |
| model = "imx-cs42888"; |
| esai-controller = <&esai>; |
| asrc-controller = <&asrc_p2p>; |
| audio-codec = <&codec>; |
| }; |
| |
| sound-fm { |
| compatible = "fsl,imx-audio-si476x", |
| "fsl,imx-tuner-si476x"; |
| model = "imx-radio-si4763"; |
| |
| ssi-controller = <&ssi2>; |
| fm-controller = <&si476x_codec>; |
| mux-int-port = <2>; |
| mux-ext-port = <5>; |
| }; |
| |
| sound-spdif { |
| compatible = "fsl,imx-audio-spdif"; |
| model = "imx-spdif"; |
| spdif-controller = <&spdif>; |
| spdif-in; |
| }; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| hog { |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x17059 |
| MX6SX_PAD_USB_H_DATA__GPIO7_IO_10 0x17059 |
| MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19 0x17059 |
| MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x80000000 |
| MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24 0x80000000 |
| MX6SX_PAD_SD2_CLK__GPIO6_IO_6 0x80000000 |
| MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23 0x80000000 |
| MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x10b0 |
| >; |
| }; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_3v3>; |
| status = "okay"; |
| }; |
| |
| &adc2 { |
| vref-supply = <®_vref_3v3>; |
| status = "okay"; |
| }; |
| |
| &audmux { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_audmux_3>; |
| status = "okay"; |
| }; |
| |
| &csi1 { |
| status = "okay"; |
| }; |
| |
| &csi2 { |
| status = "okay"; |
| }; |
| |
| &dcic1 { |
| dcic_id = <0>; |
| dcic_mux = "dcic-lcdif1"; |
| status = "okay"; |
| }; |
| |
| &dcic2 { |
| dcic_id = <1>; |
| dcic_mux = "dcic-lvds"; |
| status = "okay"; |
| }; |
| |
| &esai { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_esai_2>; |
| status = "okay"; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1_1>; |
| phy-mode = "rgmii"; |
| phy-id = <1>; |
| fsl,num_tx_queues=<3>; |
| fsl,num_rx_queues=<3>; |
| pinctrl-assert-gpios = <&max7322 0 GPIO_ACTIVE_HIGH>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &fec2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet2_1>; |
| phy-mode = "rgmii"; |
| phy-id = <0>; |
| fsl,num_tx_queues=<3>; |
| fsl,num_rx_queues=<3>; |
| fsl,magic-packet; |
| status = "okay"; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1_1>; |
| trx-en-gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; |
| trx-stby-gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>; |
| trx-wakeup-gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2_1>; |
| trx-en-gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>; |
| trx-stby-gpio = <&max7310_b 4 GPIO_ACTIVE_HIGH>; |
| trx-wakeup-gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>; |
| status = "okay"; |
| }; |
| |
| &gpc { |
| fsl,cpu_pupscr_sw2iso = <0x2>; |
| fsl,cpu_pupscr_sw = <0x1>; |
| fsl,cpu_pdnscr_iso2sw = <0x1>; |
| fsl,cpu_pdnscr_iso = <0x1>; |
| fsl,wdog-reset = <1>; /* watchdog select of reset source */ |
| }; |
| |
| &i2c2 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_1>; |
| status = "okay"; |
| |
| egalax_ts@04 { |
| compatible = "eeti,egalax_ts"; |
| reg = <0x04>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <22 2>; |
| wakeup-gpios = <&gpio6 22 0>; |
| }; |
| |
| codec: cs42888@048 { |
| compatible = "cirrus,cs42888"; |
| reg = <0x048>; |
| clocks = <&codec_osc 0>; |
| clock-names = "mclk"; |
| VA-supply = <®_audio>; |
| VD-supply = <®_audio>; |
| VLS-supply = <®_audio>; |
| VLC-supply = <®_audio>; |
| }; |
| |
| si4763: si4763@63 { |
| compatible = "si4761"; |
| reg = <0x63>; |
| va-supply = <&si4763_va>; |
| vd-supply = <&si4763_vd>; |
| vio1-supply = <&si4763_vio1>; |
| vio2-supply = <&si4763_vio2>; |
| |
| si476x_codec: si476x-codec { |
| compatible = "si476x-codec"; |
| }; |
| }; |
| |
| max7322: gpio@68 { |
| compatible = "maxim,max7322"; |
| reg = <0x68>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| resets = <&max7322_reset>; |
| }; |
| |
| pmic: pfuze100@08 { |
| compatible = "fsl,pfuze100"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1ab { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3a { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3b_reg: sw3b { |
| regulator-min-microvolt = <400000>; |
| regulator-max-microvolt = <1975000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vgen1 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vgen2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| }; |
| |
| vgen3_reg: vgen3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: vgen4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vgen5 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vgen6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &spdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spdif_3>; |
| status = "okay"; |
| }; |
| |
| &ssi2 { |
| fsl,mode = "i2s-master"; |
| status = "okay"; |
| }; |
| |
| &i2c3 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_2>; |
| status = "okay"; |
| |
| max7310_a: gpio@30 { |
| compatible = "maxim,max7310"; |
| reg = <0x30>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| resets = <&max7310_reset>; |
| }; |
| |
| max7310_b: gpio@32 { |
| compatible = "maxim,max7310"; |
| reg = <0x32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| resets = <&max7310_reset>; |
| }; |
| |
| mma8451@1c { |
| compatible = "fsl,mma8451"; |
| reg = <0x1c>; |
| position = <7>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <24 8>; |
| interrupt-route = <1>; |
| }; |
| |
| mag3110@0e { |
| compatible = "fsl,mag3110"; |
| reg = <0x0e>; |
| position = <2>; |
| interrupt-parent = <&gpio6>; |
| interrupts = <6 1>; |
| }; |
| |
| isl29023@44 { |
| compatible = "fsl,isl29023"; |
| reg = <0x44>; |
| rext = <499>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| &lcdif2 { |
| display = <&display1>; |
| disp-dev = "ldb"; |
| status = "okay"; |
| |
| display1: display { |
| bits-per-pixel = <16>; |
| bus-width = <18>; |
| }; |
| }; |
| |
| &ldb { |
| status = "okay"; |
| |
| lvds-channel@0 { |
| fsl,data-mapping = "spwg"; |
| fsl,data-width = <18>; |
| crtc = "lcdif2"; |
| status = "okay"; |
| |
| display-timings { |
| native-mode = <&timing1>; |
| timing1: hsd100pxn1 { |
| clock-frequency = <65000000>; |
| hactive = <1024>; |
| vactive = <768>; |
| hback-porch = <220>; |
| hfront-porch = <40>; |
| vback-porch = <21>; |
| vfront-porch = <7>; |
| hsync-len = <60>; |
| vsync-len = <10>; |
| }; |
| }; |
| }; |
| }; |
| |
| &mlb { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mlb_2>; |
| status = "okay"; |
| }; |
| |
| &pcie { |
| reset-gpio = <&max7310_b 3 0>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1_1>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2_1>; |
| status = "okay"; |
| }; |
| |
| &uart5 { /* for bluetooth */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5_1>; |
| fsl,uart-has-rtscts; |
| status = "okay"; |
| /* for DTE mode, add below change */ |
| /* fsl,dte-mode;*/ |
| /* pinctrl-0 = <&pinctrl_uart5dte_1>; */ |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1_1>; |
| imx6-usb-charger-detection; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3_1>; |
| pinctrl-1 = <&pinctrl_usdhc3_1_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_1_200mhz>; |
| bus-width = <8>; |
| cd-gpios = <&gpio7 10 0>; |
| wp-gpios = <&gpio3 19 0>; |
| keep-power-in-suspend; |
| enable-sdio-wakeup; |
| vmmc-supply = <®_sd3_vmmc>; |
| status = "okay"; |
| }; |
| |
| &usdhc4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc4_3>; |
| bus-width = <8>; |
| cd-gpios = <&gpio7 11 0>; |
| no-1-8-v; |
| keep-power-in-suspend; |
| enable-sdio-wakup; |
| status = "okay"; |
| }; |
| |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4_0>; |
| status = "okay"; |
| }; |
| |
| &pxp { |
| status = "okay"; |
| }; |
| |
| &qspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi1_1>; |
| /* only map 128MB */ |
| reg = <0x021e0000 0x4000>, <0x60000000 0x8000000>; |
| status = "okay"; |
| ddrsmp=<2>; |
| |
| flash0: n25q256a@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q256a"; |
| spi-max-frequency = <29000000>; |
| reg = <0>; |
| }; |
| |
| flash1: n25q256a@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q256a"; |
| spi-max-frequency = <29000000>; |
| reg = <1>; |
| }; |
| }; |
| |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand_1>; |
| status = "okay"; |
| nand-on-flash-bbt; |
| }; |
| |
| &vadc { |
| vadc_in = <0>; |
| csi_id = <1>; |
| status = "okay"; |
| }; |