| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: The integer value of this attribute ranges from 0-4. | |
| When read, this attribute returns the number of the actual | |
| profile. This value is persistent, so its equivalent to the | |
| profile that's active when the mouse is powered on next time. | |
| When written, this file sets the number of the startup profile | |
| and the mouse activates this profile immediately. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info | |
| Date: November 2012 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: When read, this file returns general data like firmware version. | |
| When written, the device can be reset. | |
| The data is 8 bytes long. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: The mouse can store a macro with max 500 key/button strokes | |
| internally. | |
| When written, this file lets one set the sequence for a specific | |
| button for a specific profile. Button and profile numbers are | |
| included in written data. The data has to be 2082 bytes long. | |
| This file is writeonly. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons | |
| Date: August 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: The mouse can store 5 profiles which can be switched by the | |
| press of a button. A profile is split in settings and buttons. | |
| profile_buttons holds information about button layout. | |
| When written, this file lets one write the respective profile | |
| buttons back to the mouse. The data has to be 77 bytes long. | |
| The mouse will reject invalid data. | |
| Which profile to write is determined by the profile number | |
| contained in the data. | |
| Before reading this file, control has to be written to select | |
| which profile to read. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: The mouse can store 5 profiles which can be switched by the | |
| press of a button. A profile is split in settings and buttons. | |
| profile_settings holds information like resolution, sensitivity | |
| and light effects. | |
| When written, this file lets one write the respective profile | |
| settings back to the mouse. The data has to be 43 bytes long. | |
| The mouse will reject invalid data. | |
| Which profile to write is determined by the profile number | |
| contained in the data. | |
| Before reading this file, control has to be written to select | |
| which profile to read. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: The mouse has a tracking- and a distance-control-unit. These | |
| can be activated/deactivated and the lift-off distance can be | |
| set. The data has to be 6 bytes long. | |
| This file is writeonly. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk | |
| Date: May 2011 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: Used to active some easy* functions of the mouse from outside. | |
| The data has to be 16 bytes long. | |
| This file is writeonly. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: When written a calibration process for the tracking control unit | |
| can be initiated/cancelled. Also lets one read/write sensor | |
| registers. | |
| The data has to be 4 bytes long. | |
| Users: http://roccat.sourceforge.net | |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image | |
| Date: October 2010 | |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> | |
| Description: When read the mouse returns a 30x30 pixel image of the | |
| sampled underground. This works only in the course of a | |
| calibration process initiated with tcu. | |
| The returned data is 1028 bytes in size. | |
| This file is readonly. | |
| Users: http://roccat.sourceforge.net |