| Kernel driver hih6130 | |
| ===================== | |
| Supported chips: | |
| * Honeywell HIH-6130 / HIH-6131 | |
| Prefix: 'hih6130' | |
| Addresses scanned: none | |
| Datasheet: Publicly available at the Honeywell website | |
| http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 | |
| Author: | |
| Iain Paton <ipaton0@gmail.com> | |
| Description | |
| ----------- | |
| The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. | |
| The difference between the two devices is that the HIH-6131 has a condensation | |
| filter. | |
| The devices communicate with the I2C protocol. All sensors are set to the same | |
| I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) | |
| can be used in the board setup code. | |
| Please see Documentation/i2c/instantiating-devices for details on how to | |
| instantiate I2C devices. | |
| sysfs-Interface | |
| --------------- | |
| temp1_input - temperature input | |
| humidity1_input - humidity input | |
| Notes | |
| ----- | |
| Command mode and alarms are not currently supported. |