| /* | |
| * Contiguous Memory Allocator for DMA mapping framework | |
| * Copyright (c) 2010-2011 by Samsung Electronics. | |
| * Written by: | |
| * Marek Szyprowski <m.szyprowski@samsung.com> | |
| * Michal Nazarewicz <mina86@mina86.com> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License as | |
| * published by the Free Software Foundation; either version 2 of the | |
| * License or (at your optional) any later version of the license. | |
| */ | |
| #define pr_fmt(fmt) "cma: " fmt | |
| #ifdef CONFIG_CMA_DEBUG | |
| #ifndef DEBUG | |
| # define DEBUG | |
| #endif | |
| #endif | |
| #include <asm/page.h> | |
| #include <asm/dma-contiguous.h> | |
| #include <linux/memblock.h> | |
| #include <linux/err.h> | |
| #include <linux/mm.h> | |
| #include <linux/mutex.h> | |
| #include <linux/page-isolation.h> | |
| #include <linux/sizes.h> | |
| #include <linux/slab.h> | |
| #include <linux/swap.h> | |
| #include <linux/mm_types.h> | |
| #include <linux/dma-contiguous.h> | |
| struct cma { | |
| unsigned long base_pfn; | |
| unsigned long count; | |
| unsigned long *bitmap; | |
| }; | |
| struct cma *dma_contiguous_default_area; | |
| #ifdef CONFIG_CMA_SIZE_MBYTES | |
| #define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES | |
| #else | |
| #define CMA_SIZE_MBYTES 0 | |
| #endif | |
| /* | |
| * Default global CMA area size can be defined in kernel's .config. | |
| * This is usefull mainly for distro maintainers to create a kernel | |
| * that works correctly for most supported systems. | |
| * The size can be set in bytes or as a percentage of the total memory | |
| * in the system. | |
| * | |
| * Users, who want to set the size of global CMA area for their system | |
| * should use cma= kernel parameter. | |
| */ | |
| static const phys_addr_t size_bytes = CMA_SIZE_MBYTES * SZ_1M; | |
| static phys_addr_t size_cmdline = -1; | |
| static int __init early_cma(char *p) | |
| { | |
| pr_debug("%s(%s)\n", __func__, p); | |
| size_cmdline = memparse(p, &p); | |
| return 0; | |
| } | |
| early_param("cma", early_cma); | |
| #ifdef CONFIG_CMA_SIZE_PERCENTAGE | |
| static phys_addr_t __init __maybe_unused cma_early_percent_memory(void) | |
| { | |
| struct memblock_region *reg; | |
| unsigned long total_pages = 0; | |
| /* | |
| * We cannot use memblock_phys_mem_size() here, because | |
| * memblock_analyze() has not been called yet. | |
| */ | |
| for_each_memblock(memory, reg) | |
| total_pages += memblock_region_memory_end_pfn(reg) - | |
| memblock_region_memory_base_pfn(reg); | |
| return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT; | |
| } | |
| #else | |
| static inline __maybe_unused phys_addr_t cma_early_percent_memory(void) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| /** | |
| * dma_contiguous_reserve() - reserve area for contiguous memory handling | |
| * @limit: End address of the reserved memory (optional, 0 for any). | |
| * | |
| * This function reserves memory from early allocator. It should be | |
| * called by arch specific code once the early allocator (memblock or bootmem) | |
| * has been activated and all other subsystems have already allocated/reserved | |
| * memory. | |
| */ | |
| void __init dma_contiguous_reserve(phys_addr_t limit) | |
| { | |
| phys_addr_t selected_size = 0; | |
| pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit); | |
| if (size_cmdline != -1) { | |
| selected_size = size_cmdline; | |
| } else { | |
| #ifdef CONFIG_CMA_SIZE_SEL_MBYTES | |
| selected_size = size_bytes; | |
| #elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE) | |
| selected_size = cma_early_percent_memory(); | |
| #elif defined(CONFIG_CMA_SIZE_SEL_MIN) | |
| selected_size = min(size_bytes, cma_early_percent_memory()); | |
| #elif defined(CONFIG_CMA_SIZE_SEL_MAX) | |
| selected_size = max(size_bytes, cma_early_percent_memory()); | |
| #endif | |
| } | |
| if (selected_size) { | |
| pr_debug("%s: reserving %ld MiB for global area\n", __func__, | |
| (unsigned long)selected_size / SZ_1M); | |
| dma_declare_contiguous(NULL, selected_size, 0, limit); | |
| } | |
| }; | |
| static DEFINE_MUTEX(cma_mutex); | |
| static __init int cma_activate_area(unsigned long base_pfn, unsigned long count) | |
| { | |
| unsigned long pfn = base_pfn; | |
| unsigned i = count >> pageblock_order; | |
| struct zone *zone; | |
| WARN_ON_ONCE(!pfn_valid(pfn)); | |
| zone = page_zone(pfn_to_page(pfn)); | |
| do { | |
| unsigned j; | |
| base_pfn = pfn; | |
| for (j = pageblock_nr_pages; j; --j, pfn++) { | |
| WARN_ON_ONCE(!pfn_valid(pfn)); | |
| if (page_zone(pfn_to_page(pfn)) != zone) | |
| return -EINVAL; | |
| } | |
| init_cma_reserved_pageblock(pfn_to_page(base_pfn)); | |
| } while (--i); | |
| return 0; | |
| } | |
| static __init struct cma *cma_create_area(unsigned long base_pfn, | |
| unsigned long count) | |
| { | |
| int bitmap_size = BITS_TO_LONGS(count) * sizeof(long); | |
| struct cma *cma; | |
| int ret = -ENOMEM; | |
| pr_debug("%s(base %08lx, count %lx)\n", __func__, base_pfn, count); | |
| cma = kmalloc(sizeof *cma, GFP_KERNEL); | |
| if (!cma) | |
| return ERR_PTR(-ENOMEM); | |
| cma->base_pfn = base_pfn; | |
| cma->count = count; | |
| cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); | |
| if (!cma->bitmap) | |
| goto no_mem; | |
| ret = cma_activate_area(base_pfn, count); | |
| if (ret) | |
| goto error; | |
| pr_debug("%s: returned %p\n", __func__, (void *)cma); | |
| return cma; | |
| error: | |
| kfree(cma->bitmap); | |
| no_mem: | |
| kfree(cma); | |
| return ERR_PTR(ret); | |
| } | |
| static struct cma_reserved { | |
| phys_addr_t start; | |
| unsigned long size; | |
| struct device *dev; | |
| } cma_reserved[MAX_CMA_AREAS] __initdata; | |
| static unsigned cma_reserved_count __initdata; | |
| static int __init cma_init_reserved_areas(void) | |
| { | |
| struct cma_reserved *r = cma_reserved; | |
| unsigned i = cma_reserved_count; | |
| pr_debug("%s()\n", __func__); | |
| for (; i; --i, ++r) { | |
| struct cma *cma; | |
| cma = cma_create_area(PFN_DOWN(r->start), | |
| r->size >> PAGE_SHIFT); | |
| if (!IS_ERR(cma)) | |
| dev_set_cma_area(r->dev, cma); | |
| } | |
| return 0; | |
| } | |
| core_initcall(cma_init_reserved_areas); | |
| /** | |
| * dma_declare_contiguous() - reserve area for contiguous memory handling | |
| * for particular device | |
| * @dev: Pointer to device structure. | |
| * @size: Size of the reserved memory. | |
| * @base: Start address of the reserved memory (optional, 0 for any). | |
| * @limit: End address of the reserved memory (optional, 0 for any). | |
| * | |
| * This function reserves memory for specified device. It should be | |
| * called by board specific code when early allocator (memblock or bootmem) | |
| * is still activate. | |
| */ | |
| int __init dma_declare_contiguous(struct device *dev, phys_addr_t size, | |
| phys_addr_t base, phys_addr_t limit) | |
| { | |
| struct cma_reserved *r = &cma_reserved[cma_reserved_count]; | |
| phys_addr_t alignment; | |
| pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, | |
| (unsigned long)size, (unsigned long)base, | |
| (unsigned long)limit); | |
| /* Sanity checks */ | |
| if (cma_reserved_count == ARRAY_SIZE(cma_reserved)) { | |
| pr_err("Not enough slots for CMA reserved regions!\n"); | |
| return -ENOSPC; | |
| } | |
| if (!size) | |
| return -EINVAL; | |
| /* Sanitise input arguments */ | |
| alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); | |
| base = ALIGN(base, alignment); | |
| size = ALIGN(size, alignment); | |
| limit &= ~(alignment - 1); | |
| /* Reserve memory */ | |
| if (base) { | |
| if (memblock_is_region_reserved(base, size) || | |
| memblock_reserve(base, size) < 0) { | |
| base = -EBUSY; | |
| goto err; | |
| } | |
| } else { | |
| /* | |
| * Use __memblock_alloc_base() since | |
| * memblock_alloc_base() panic()s. | |
| */ | |
| phys_addr_t addr = __memblock_alloc_base(size, alignment, limit); | |
| if (!addr) { | |
| base = -ENOMEM; | |
| goto err; | |
| } else { | |
| base = addr; | |
| } | |
| } | |
| /* | |
| * Each reserved area must be initialised later, when more kernel | |
| * subsystems (like slab allocator) are available. | |
| */ | |
| r->start = base; | |
| r->size = size; | |
| r->dev = dev; | |
| cma_reserved_count++; | |
| pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, | |
| (unsigned long)base); | |
| /* Architecture specific contiguous memory fixup. */ | |
| dma_contiguous_early_fixup(base, size); | |
| return 0; | |
| err: | |
| pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); | |
| return base; | |
| } | |
| /** | |
| * dma_alloc_from_contiguous() - allocate pages from contiguous area | |
| * @dev: Pointer to device for which the allocation is performed. | |
| * @count: Requested number of pages. | |
| * @align: Requested alignment of pages (in PAGE_SIZE order). | |
| * | |
| * This function allocates memory buffer for specified device. It uses | |
| * device specific contiguous memory area if available or the default | |
| * global one. Requires architecture specific get_dev_cma_area() helper | |
| * function. | |
| */ | |
| struct page *dma_alloc_from_contiguous(struct device *dev, int count, | |
| unsigned int align) | |
| { | |
| unsigned long mask, pfn, pageno, start = 0; | |
| struct cma *cma = dev_get_cma_area(dev); | |
| struct page *page = NULL; | |
| int ret; | |
| if (!cma || !cma->count) | |
| return NULL; | |
| if (align > CONFIG_CMA_ALIGNMENT) | |
| align = CONFIG_CMA_ALIGNMENT; | |
| pr_debug("%s(cma %p, count %d, align %d)\n", __func__, (void *)cma, | |
| count, align); | |
| if (!count) | |
| return NULL; | |
| mask = (1 << align) - 1; | |
| mutex_lock(&cma_mutex); | |
| for (;;) { | |
| pageno = bitmap_find_next_zero_area(cma->bitmap, cma->count, | |
| start, count, mask); | |
| if (pageno >= cma->count) | |
| break; | |
| pfn = cma->base_pfn + pageno; | |
| ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA); | |
| if (ret == 0) { | |
| bitmap_set(cma->bitmap, pageno, count); | |
| page = pfn_to_page(pfn); | |
| break; | |
| } else if (ret != -EBUSY) { | |
| break; | |
| } | |
| pr_debug("%s(): memory range at %p is busy, retrying\n", | |
| __func__, pfn_to_page(pfn)); | |
| /* try again with a bit different memory target */ | |
| start = pageno + mask + 1; | |
| } | |
| mutex_unlock(&cma_mutex); | |
| pr_debug("%s(): returned %p\n", __func__, page); | |
| return page; | |
| } | |
| /** | |
| * dma_release_from_contiguous() - release allocated pages | |
| * @dev: Pointer to device for which the pages were allocated. | |
| * @pages: Allocated pages. | |
| * @count: Number of allocated pages. | |
| * | |
| * This function releases memory allocated by dma_alloc_from_contiguous(). | |
| * It returns false when provided pages do not belong to contiguous area and | |
| * true otherwise. | |
| */ | |
| bool dma_release_from_contiguous(struct device *dev, struct page *pages, | |
| int count) | |
| { | |
| struct cma *cma = dev_get_cma_area(dev); | |
| unsigned long pfn; | |
| if (!cma || !pages) | |
| return false; | |
| pr_debug("%s(page %p)\n", __func__, (void *)pages); | |
| pfn = page_to_pfn(pages); | |
| if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count) | |
| return false; | |
| VM_BUG_ON(pfn + count > cma->base_pfn + cma->count); | |
| mutex_lock(&cma_mutex); | |
| bitmap_clear(cma->bitmap, pfn - cma->base_pfn, count); | |
| free_contig_range(pfn, count); | |
| mutex_unlock(&cma_mutex); | |
| return true; | |
| } |