| /* |
| * Copyright (c) 2000 Andre Lucas. All rights reserved. |
| * Portions copyright (c) 1998 Todd C. Miller |
| * Portions copyright (c) 1996 Jason Downs |
| * Portions copyright (c) 1996 Theo de Raadt |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. |
| * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /* |
| * The btmp logging code is derived from login.c from util-linux and is under |
| * the the following license: |
| * |
| * Copyright (c) 1980, 1987, 1988 The Regents of the University of California. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms are permitted |
| * provided that the above copyright notice and this paragraph are |
| * duplicated in all such forms and that any documentation, |
| * advertising materials, and other materials related to such |
| * distribution and use acknowledge that the software was developed |
| * by the University of California, Berkeley. The name of the |
| * University may not be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED |
| * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| */ |
| |
| |
| /** |
| ** loginrec.c: platform-independent login recording and lastlog retrieval |
| **/ |
| |
| /* |
| * The new login code explained |
| * ============================ |
| * |
| * This code attempts to provide a common interface to login recording |
| * (utmp and friends) and last login time retrieval. |
| * |
| * Its primary means of achieving this is to use 'struct logininfo', a |
| * union of all the useful fields in the various different types of |
| * system login record structures one finds on UNIX variants. |
| * |
| * We depend on autoconf to define which recording methods are to be |
| * used, and which fields are contained in the relevant data structures |
| * on the local system. Many C preprocessor symbols affect which code |
| * gets compiled here. |
| * |
| * The code is designed to make it easy to modify a particular |
| * recording method, without affecting other methods nor requiring so |
| * many nested conditional compilation blocks as were commonplace in |
| * the old code. |
| * |
| * For login recording, we try to use the local system's libraries as |
| * these are clearly most likely to work correctly. For utmp systems |
| * this usually means login() and logout() or setutent() etc., probably |
| * in libutil, along with logwtmp() etc. On these systems, we fall back |
| * to writing the files directly if we have to, though this method |
| * requires very thorough testing so we do not corrupt local auditing |
| * information. These files and their access methods are very system |
| * specific indeed. |
| * |
| * For utmpx systems, the corresponding library functions are |
| * setutxent() etc. To the author's knowledge, all utmpx systems have |
| * these library functions and so no direct write is attempted. If such |
| * a system exists and needs support, direct analogues of the [uw]tmp |
| * code should suffice. |
| * |
| * Retrieving the time of last login ('lastlog') is in some ways even |
| * more problemmatic than login recording. Some systems provide a |
| * simple table of all users which we seek based on uid and retrieve a |
| * relatively standard structure. Others record the same information in |
| * a directory with a separate file, and others don't record the |
| * information separately at all. For systems in the latter category, |
| * we look backwards in the wtmp or wtmpx file for the last login entry |
| * for our user. Naturally this is slower and on busy systems could |
| * incur a significant performance penalty. |
| * |
| * Calling the new code |
| * -------------------- |
| * |
| * In OpenSSH all login recording and retrieval is performed in |
| * login.c. Here you'll find working examples. Also, in the logintest.c |
| * program there are more examples. |
| * |
| * Internal handler calling method |
| * ------------------------------- |
| * |
| * When a call is made to login_login() or login_logout(), both |
| * routines set a struct logininfo flag defining which action (log in, |
| * or log out) is to be taken. They both then call login_write(), which |
| * calls whichever of the many structure-specific handlers autoconf |
| * selects for the local system. |
| * |
| * The handlers themselves handle system data structure specifics. Both |
| * struct utmp and struct utmpx have utility functions (see |
| * construct_utmp*()) to try to make it simpler to add extra systems |
| * that introduce new features to either structure. |
| * |
| * While it may seem terribly wasteful to replicate so much similar |
| * code for each method, experience has shown that maintaining code to |
| * write both struct utmp and utmpx in one function, whilst maintaining |
| * support for all systems whether they have library support or not, is |
| * a difficult and time-consuming task. |
| * |
| * Lastlog support proceeds similarly. Functions login_get_lastlog() |
| * (and its OpenSSH-tuned friend login_get_lastlog_time()) call |
| * getlast_entry(), which tries one of three methods to find the last |
| * login time. It uses local system lastlog support if it can, |
| * otherwise it tries wtmp or wtmpx before giving up and returning 0, |
| * meaning "tilt". |
| * |
| * Maintenance |
| * ----------- |
| * |
| * In many cases it's possible to tweak autoconf to select the correct |
| * methods for a particular platform, either by improving the detection |
| * code (best), or by presetting DISABLE_<method> or CONF_<method>_FILE |
| * symbols for the platform. |
| * |
| * Use logintest to check which symbols are defined before modifying |
| * configure.ac and loginrec.c. (You have to build logintest yourself |
| * with 'make logintest' as it's not built by default.) |
| * |
| * Otherwise, patches to the specific method(s) are very helpful! |
| */ |
| |
| #include "includes.h" |
| |
| #include <sys/types.h> |
| #include <sys/stat.h> |
| #include <sys/socket.h> |
| |
| #include <netinet/in.h> |
| |
| #include <errno.h> |
| #include <fcntl.h> |
| #ifdef HAVE_PATHS_H |
| # include <paths.h> |
| #endif |
| #include <pwd.h> |
| #include <stdarg.h> |
| #include <string.h> |
| #include <time.h> |
| #include <unistd.h> |
| |
| #include "xmalloc.h" |
| #include "key.h" |
| #include "hostfile.h" |
| #include "ssh.h" |
| #include "loginrec.h" |
| #include "log.h" |
| #include "atomicio.h" |
| #include "packet.h" |
| #include "canohost.h" |
| #include "auth.h" |
| #include "buffer.h" |
| |
| #ifdef HAVE_UTIL_H |
| # include <util.h> |
| #endif |
| |
| #ifdef HAVE_LIBUTIL_H |
| # include <libutil.h> |
| #endif |
| |
| /** |
| ** prototypes for helper functions in this file |
| **/ |
| |
| #if HAVE_UTMP_H |
| void set_utmp_time(struct logininfo *li, struct utmp *ut); |
| void construct_utmp(struct logininfo *li, struct utmp *ut); |
| #endif |
| |
| #ifdef HAVE_UTMPX_H |
| void set_utmpx_time(struct logininfo *li, struct utmpx *ut); |
| void construct_utmpx(struct logininfo *li, struct utmpx *ut); |
| #endif |
| |
| int utmp_write_entry(struct logininfo *li); |
| int utmpx_write_entry(struct logininfo *li); |
| int wtmp_write_entry(struct logininfo *li); |
| int wtmpx_write_entry(struct logininfo *li); |
| int lastlog_write_entry(struct logininfo *li); |
| int syslogin_write_entry(struct logininfo *li); |
| |
| int getlast_entry(struct logininfo *li); |
| int lastlog_get_entry(struct logininfo *li); |
| int utmpx_get_entry(struct logininfo *li); |
| int wtmp_get_entry(struct logininfo *li); |
| int wtmpx_get_entry(struct logininfo *li); |
| |
| extern Buffer loginmsg; |
| |
| /* pick the shortest string */ |
| #define MIN_SIZEOF(s1,s2) (sizeof(s1) < sizeof(s2) ? sizeof(s1) : sizeof(s2)) |
| |
| /** |
| ** platform-independent login functions |
| **/ |
| |
| /* |
| * login_login(struct logininfo *) - Record a login |
| * |
| * Call with a pointer to a struct logininfo initialised with |
| * login_init_entry() or login_alloc_entry() |
| * |
| * Returns: |
| * >0 if successful |
| * 0 on failure (will use OpenSSH's logging facilities for diagnostics) |
| */ |
| int |
| login_login(struct logininfo *li) |
| { |
| li->type = LTYPE_LOGIN; |
| return (login_write(li)); |
| } |
| |
| |
| /* |
| * login_logout(struct logininfo *) - Record a logout |
| * |
| * Call as with login_login() |
| * |
| * Returns: |
| * >0 if successful |
| * 0 on failure (will use OpenSSH's logging facilities for diagnostics) |
| */ |
| int |
| login_logout(struct logininfo *li) |
| { |
| li->type = LTYPE_LOGOUT; |
| return (login_write(li)); |
| } |
| |
| /* |
| * login_get_lastlog_time(int) - Retrieve the last login time |
| * |
| * Retrieve the last login time for the given uid. Will try to use the |
| * system lastlog facilities if they are available, but will fall back |
| * to looking in wtmp/wtmpx if necessary |
| * |
| * Returns: |
| * 0 on failure, or if user has never logged in |
| * Time in seconds from the epoch if successful |
| * |
| * Useful preprocessor symbols: |
| * DISABLE_LASTLOG: If set, *never* even try to retrieve lastlog |
| * info |
| * USE_LASTLOG: If set, indicates the presence of system lastlog |
| * facilities. If this and DISABLE_LASTLOG are not set, |
| * try to retrieve lastlog information from wtmp/wtmpx. |
| */ |
| unsigned int |
| login_get_lastlog_time(const uid_t uid) |
| { |
| struct logininfo li; |
| |
| if (login_get_lastlog(&li, uid)) |
| return (li.tv_sec); |
| else |
| return (0); |
| } |
| |
| /* |
| * login_get_lastlog(struct logininfo *, int) - Retrieve a lastlog entry |
| * |
| * Retrieve a logininfo structure populated (only partially) with |
| * information from the system lastlog data, or from wtmp/wtmpx if no |
| * system lastlog information exists. |
| * |
| * Note this routine must be given a pre-allocated logininfo. |
| * |
| * Returns: |
| * >0: A pointer to your struct logininfo if successful |
| * 0 on failure (will use OpenSSH's logging facilities for diagnostics) |
| */ |
| struct logininfo * |
| login_get_lastlog(struct logininfo *li, const uid_t uid) |
| { |
| struct passwd *pw; |
| |
| memset(li, '\0', sizeof(*li)); |
| li->uid = uid; |
| |
| /* |
| * If we don't have a 'real' lastlog, we need the username to |
| * reliably search wtmp(x) for the last login (see |
| * wtmp_get_entry().) |
| */ |
| pw = getpwuid(uid); |
| if (pw == NULL) |
| fatal("%s: Cannot find account for uid %ld", __func__, |
| (long)uid); |
| |
| /* No MIN_SIZEOF here - we absolutely *must not* truncate the |
| * username (XXX - so check for trunc!) */ |
| strlcpy(li->username, pw->pw_name, sizeof(li->username)); |
| |
| if (getlast_entry(li)) |
| return (li); |
| else |
| return (NULL); |
| } |
| |
| |
| /* |
| * login_alloc_entry(int, char*, char*, char*) - Allocate and initialise |
| * a logininfo structure |
| * |
| * This function creates a new struct logininfo, a data structure |
| * meant to carry the information required to portably record login info. |
| * |
| * Returns a pointer to a newly created struct logininfo. If memory |
| * allocation fails, the program halts. |
| */ |
| struct |
| logininfo *login_alloc_entry(pid_t pid, const char *username, |
| const char *hostname, const char *line) |
| { |
| struct logininfo *newli; |
| |
| newli = xmalloc(sizeof(*newli)); |
| login_init_entry(newli, pid, username, hostname, line); |
| return (newli); |
| } |
| |
| |
| /* login_free_entry(struct logininfo *) - free struct memory */ |
| void |
| login_free_entry(struct logininfo *li) |
| { |
| xfree(li); |
| } |
| |
| |
| /* login_init_entry(struct logininfo *, int, char*, char*, char*) |
| * - initialise a struct logininfo |
| * |
| * Populates a new struct logininfo, a data structure meant to carry |
| * the information required to portably record login info. |
| * |
| * Returns: 1 |
| */ |
| int |
| login_init_entry(struct logininfo *li, pid_t pid, const char *username, |
| const char *hostname, const char *line) |
| { |
| struct passwd *pw; |
| |
| memset(li, 0, sizeof(*li)); |
| |
| li->pid = pid; |
| |
| /* set the line information */ |
| if (line) |
| line_fullname(li->line, line, sizeof(li->line)); |
| |
| if (username) { |
| strlcpy(li->username, username, sizeof(li->username)); |
| pw = getpwnam(li->username); |
| if (pw == NULL) { |
| fatal("%s: Cannot find user \"%s\"", __func__, |
| li->username); |
| } |
| li->uid = pw->pw_uid; |
| } |
| |
| if (hostname) |
| strlcpy(li->hostname, hostname, sizeof(li->hostname)); |
| |
| return (1); |
| } |
| |
| /* |
| * login_set_current_time(struct logininfo *) - set the current time |
| * |
| * Set the current time in a logininfo structure. This function is |
| * meant to eliminate the need to deal with system dependencies for |
| * time handling. |
| */ |
| void |
| login_set_current_time(struct logininfo *li) |
| { |
| struct timeval tv; |
| |
| gettimeofday(&tv, NULL); |
| |
| li->tv_sec = tv.tv_sec; |
| li->tv_usec = tv.tv_usec; |
| } |
| |
| /* copy a sockaddr_* into our logininfo */ |
| void |
| login_set_addr(struct logininfo *li, const struct sockaddr *sa, |
| const unsigned int sa_size) |
| { |
| unsigned int bufsize = sa_size; |
| |
| /* make sure we don't overrun our union */ |
| if (sizeof(li->hostaddr) < sa_size) |
| bufsize = sizeof(li->hostaddr); |
| |
| memcpy(&li->hostaddr.sa, sa, bufsize); |
| } |
| |
| |
| /** |
| ** login_write: Call low-level recording functions based on autoconf |
| ** results |
| **/ |
| int |
| login_write(struct logininfo *li) |
| { |
| #ifndef HAVE_CYGWIN |
| if (geteuid() != 0) { |
| logit("Attempt to write login records by non-root user (aborting)"); |
| return (1); |
| } |
| #endif |
| |
| /* set the timestamp */ |
| login_set_current_time(li); |
| #ifdef USE_LOGIN |
| syslogin_write_entry(li); |
| #endif |
| #ifdef USE_LASTLOG |
| if (li->type == LTYPE_LOGIN) |
| lastlog_write_entry(li); |
| #endif |
| #ifdef USE_UTMP |
| utmp_write_entry(li); |
| #endif |
| #ifdef USE_WTMP |
| wtmp_write_entry(li); |
| #endif |
| #ifdef USE_UTMPX |
| utmpx_write_entry(li); |
| #endif |
| #ifdef USE_WTMPX |
| wtmpx_write_entry(li); |
| #endif |
| #ifdef CUSTOM_SYS_AUTH_RECORD_LOGIN |
| if (li->type == LTYPE_LOGIN && |
| !sys_auth_record_login(li->username,li->hostname,li->line, |
| &loginmsg)) |
| logit("Writing login record failed for %s", li->username); |
| #endif |
| #ifdef SSH_AUDIT_EVENTS |
| if (li->type == LTYPE_LOGIN) |
| audit_session_open(li); |
| else if (li->type == LTYPE_LOGOUT) |
| audit_session_close(li); |
| #endif |
| return (0); |
| } |
| |
| #ifdef LOGIN_NEEDS_UTMPX |
| int |
| login_utmp_only(struct logininfo *li) |
| { |
| li->type = LTYPE_LOGIN; |
| login_set_current_time(li); |
| # ifdef USE_UTMP |
| utmp_write_entry(li); |
| # endif |
| # ifdef USE_WTMP |
| wtmp_write_entry(li); |
| # endif |
| # ifdef USE_UTMPX |
| utmpx_write_entry(li); |
| # endif |
| # ifdef USE_WTMPX |
| wtmpx_write_entry(li); |
| # endif |
| return (0); |
| } |
| #endif |
| |
| /** |
| ** getlast_entry: Call low-level functions to retrieve the last login |
| ** time. |
| **/ |
| |
| /* take the uid in li and return the last login time */ |
| int |
| getlast_entry(struct logininfo *li) |
| { |
| #ifdef USE_LASTLOG |
| return(lastlog_get_entry(li)); |
| #else /* !USE_LASTLOG */ |
| #if defined(USE_UTMPX) && defined(HAVE_SETUTXDB) && \ |
| defined(UTXDB_LASTLOGIN) && defined(HAVE_GETUTXUSER) |
| return (utmpx_get_entry(li)); |
| #endif |
| |
| #if defined(DISABLE_LASTLOG) |
| /* On some systems we shouldn't even try to obtain last login |
| * time, e.g. AIX */ |
| return (0); |
| # elif defined(USE_WTMP) && \ |
| (defined(HAVE_TIME_IN_UTMP) || defined(HAVE_TV_IN_UTMP)) |
| /* retrieve last login time from utmp */ |
| return (wtmp_get_entry(li)); |
| # elif defined(USE_WTMPX) && \ |
| (defined(HAVE_TIME_IN_UTMPX) || defined(HAVE_TV_IN_UTMPX)) |
| /* If wtmp isn't available, try wtmpx */ |
| return (wtmpx_get_entry(li)); |
| # else |
| /* Give up: No means of retrieving last login time */ |
| return (0); |
| # endif /* DISABLE_LASTLOG */ |
| #endif /* USE_LASTLOG */ |
| } |
| |
| |
| |
| /* |
| * 'line' string utility functions |
| * |
| * These functions process the 'line' string into one of three forms: |
| * |
| * 1. The full filename (including '/dev') |
| * 2. The stripped name (excluding '/dev') |
| * 3. The abbreviated name (e.g. /dev/ttyp00 -> yp00 |
| * /dev/pts/1 -> ts/1 ) |
| * |
| * Form 3 is used on some systems to identify a .tmp.? entry when |
| * attempting to remove it. Typically both addition and removal is |
| * performed by one application - say, sshd - so as long as the choice |
| * uniquely identifies a terminal it's ok. |
| */ |
| |
| |
| /* |
| * line_fullname(): add the leading '/dev/' if it doesn't exist make |
| * sure dst has enough space, if not just copy src (ugh) |
| */ |
| char * |
| line_fullname(char *dst, const char *src, u_int dstsize) |
| { |
| memset(dst, '\0', dstsize); |
| if ((strncmp(src, "/dev/", 5) == 0) || (dstsize < (strlen(src) + 5))) |
| strlcpy(dst, src, dstsize); |
| else { |
| strlcpy(dst, "/dev/", dstsize); |
| strlcat(dst, src, dstsize); |
| } |
| return (dst); |
| } |
| |
| /* line_stripname(): strip the leading '/dev' if it exists, return dst */ |
| char * |
| line_stripname(char *dst, const char *src, int dstsize) |
| { |
| memset(dst, '\0', dstsize); |
| if (strncmp(src, "/dev/", 5) == 0) |
| strlcpy(dst, src + 5, dstsize); |
| else |
| strlcpy(dst, src, dstsize); |
| return (dst); |
| } |
| |
| /* |
| * line_abbrevname(): Return the abbreviated (usually four-character) |
| * form of the line (Just use the last <dstsize> characters of the |
| * full name.) |
| * |
| * NOTE: use strncpy because we do NOT necessarily want zero |
| * termination |
| */ |
| char * |
| line_abbrevname(char *dst, const char *src, int dstsize) |
| { |
| size_t len; |
| |
| memset(dst, '\0', dstsize); |
| |
| /* Always skip prefix if present */ |
| if (strncmp(src, "/dev/", 5) == 0) |
| src += 5; |
| |
| #ifdef WITH_ABBREV_NO_TTY |
| if (strncmp(src, "tty", 3) == 0) |
| src += 3; |
| #endif |
| |
| len = strlen(src); |
| |
| if (len > 0) { |
| if (((int)len - dstsize) > 0) |
| src += ((int)len - dstsize); |
| |
| /* note: _don't_ change this to strlcpy */ |
| strncpy(dst, src, (size_t)dstsize); |
| } |
| |
| return (dst); |
| } |
| |
| /** |
| ** utmp utility functions |
| ** |
| ** These functions manipulate struct utmp, taking system differences |
| ** into account. |
| **/ |
| |
| #if defined(USE_UTMP) || defined (USE_WTMP) || defined (USE_LOGIN) |
| |
| /* build the utmp structure */ |
| void |
| set_utmp_time(struct logininfo *li, struct utmp *ut) |
| { |
| # if defined(HAVE_TV_IN_UTMP) |
| ut->ut_tv.tv_sec = li->tv_sec; |
| ut->ut_tv.tv_usec = li->tv_usec; |
| # elif defined(HAVE_TIME_IN_UTMP) |
| ut->ut_time = li->tv_sec; |
| # endif |
| } |
| |
| void |
| construct_utmp(struct logininfo *li, |
| struct utmp *ut) |
| { |
| # ifdef HAVE_ADDR_V6_IN_UTMP |
| struct sockaddr_in6 *sa6; |
| # endif |
| |
| memset(ut, '\0', sizeof(*ut)); |
| |
| /* First fill out fields used for both logins and logouts */ |
| |
| # ifdef HAVE_ID_IN_UTMP |
| line_abbrevname(ut->ut_id, li->line, sizeof(ut->ut_id)); |
| # endif |
| |
| # ifdef HAVE_TYPE_IN_UTMP |
| /* This is done here to keep utmp constants out of struct logininfo */ |
| switch (li->type) { |
| case LTYPE_LOGIN: |
| ut->ut_type = USER_PROCESS; |
| #ifdef _UNICOS |
| cray_set_tmpdir(ut); |
| #endif |
| break; |
| case LTYPE_LOGOUT: |
| ut->ut_type = DEAD_PROCESS; |
| #ifdef _UNICOS |
| cray_retain_utmp(ut, li->pid); |
| #endif |
| break; |
| } |
| # endif |
| set_utmp_time(li, ut); |
| |
| line_stripname(ut->ut_line, li->line, sizeof(ut->ut_line)); |
| |
| # ifdef HAVE_PID_IN_UTMP |
| ut->ut_pid = li->pid; |
| # endif |
| |
| /* If we're logging out, leave all other fields blank */ |
| if (li->type == LTYPE_LOGOUT) |
| return; |
| |
| /* |
| * These fields are only used when logging in, and are blank |
| * for logouts. |
| */ |
| |
| /* Use strncpy because we don't necessarily want null termination */ |
| strncpy(ut->ut_name, li->username, |
| MIN_SIZEOF(ut->ut_name, li->username)); |
| # ifdef HAVE_HOST_IN_UTMP |
| strncpy(ut->ut_host, li->hostname, |
| MIN_SIZEOF(ut->ut_host, li->hostname)); |
| # endif |
| # ifdef HAVE_ADDR_IN_UTMP |
| /* this is just a 32-bit IP address */ |
| if (li->hostaddr.sa.sa_family == AF_INET) |
| ut->ut_addr = li->hostaddr.sa_in.sin_addr.s_addr; |
| # endif |
| # ifdef HAVE_ADDR_V6_IN_UTMP |
| /* this is just a 128-bit IPv6 address */ |
| if (li->hostaddr.sa.sa_family == AF_INET6) { |
| sa6 = ((struct sockaddr_in6 *)&li->hostaddr.sa); |
| memcpy(ut->ut_addr_v6, sa6->sin6_addr.s6_addr, 16); |
| if (IN6_IS_ADDR_V4MAPPED(&sa6->sin6_addr)) { |
| ut->ut_addr_v6[0] = ut->ut_addr_v6[3]; |
| ut->ut_addr_v6[1] = 0; |
| ut->ut_addr_v6[2] = 0; |
| ut->ut_addr_v6[3] = 0; |
| } |
| } |
| # endif |
| } |
| #endif /* USE_UTMP || USE_WTMP || USE_LOGIN */ |
| |
| /** |
| ** utmpx utility functions |
| ** |
| ** These functions manipulate struct utmpx, accounting for system |
| ** variations. |
| **/ |
| |
| #if defined(USE_UTMPX) || defined (USE_WTMPX) |
| /* build the utmpx structure */ |
| void |
| set_utmpx_time(struct logininfo *li, struct utmpx *utx) |
| { |
| # if defined(HAVE_TV_IN_UTMPX) |
| utx->ut_tv.tv_sec = li->tv_sec; |
| utx->ut_tv.tv_usec = li->tv_usec; |
| # elif defined(HAVE_TIME_IN_UTMPX) |
| utx->ut_time = li->tv_sec; |
| # endif |
| } |
| |
| void |
| construct_utmpx(struct logininfo *li, struct utmpx *utx) |
| { |
| # ifdef HAVE_ADDR_V6_IN_UTMP |
| struct sockaddr_in6 *sa6; |
| # endif |
| memset(utx, '\0', sizeof(*utx)); |
| |
| # ifdef HAVE_ID_IN_UTMPX |
| line_abbrevname(utx->ut_id, li->line, sizeof(utx->ut_id)); |
| # endif |
| |
| /* this is done here to keep utmp constants out of loginrec.h */ |
| switch (li->type) { |
| case LTYPE_LOGIN: |
| utx->ut_type = USER_PROCESS; |
| break; |
| case LTYPE_LOGOUT: |
| utx->ut_type = DEAD_PROCESS; |
| break; |
| } |
| line_stripname(utx->ut_line, li->line, sizeof(utx->ut_line)); |
| set_utmpx_time(li, utx); |
| utx->ut_pid = li->pid; |
| |
| /* strncpy(): Don't necessarily want null termination */ |
| strncpy(utx->ut_user, li->username, |
| MIN_SIZEOF(utx->ut_user, li->username)); |
| |
| if (li->type == LTYPE_LOGOUT) |
| return; |
| |
| /* |
| * These fields are only used when logging in, and are blank |
| * for logouts. |
| */ |
| |
| # ifdef HAVE_HOST_IN_UTMPX |
| strncpy(utx->ut_host, li->hostname, |
| MIN_SIZEOF(utx->ut_host, li->hostname)); |
| # endif |
| # ifdef HAVE_ADDR_IN_UTMPX |
| /* this is just a 32-bit IP address */ |
| if (li->hostaddr.sa.sa_family == AF_INET) |
| utx->ut_addr = li->hostaddr.sa_in.sin_addr.s_addr; |
| # endif |
| # ifdef HAVE_ADDR_V6_IN_UTMP |
| /* this is just a 128-bit IPv6 address */ |
| if (li->hostaddr.sa.sa_family == AF_INET6) { |
| sa6 = ((struct sockaddr_in6 *)&li->hostaddr.sa); |
| memcpy(ut->ut_addr_v6, sa6->sin6_addr.s6_addr, 16); |
| if (IN6_IS_ADDR_V4MAPPED(&sa6->sin6_addr)) { |
| ut->ut_addr_v6[0] = ut->ut_addr_v6[3]; |
| ut->ut_addr_v6[1] = 0; |
| ut->ut_addr_v6[2] = 0; |
| ut->ut_addr_v6[3] = 0; |
| } |
| } |
| # endif |
| # ifdef HAVE_SYSLEN_IN_UTMPX |
| /* ut_syslen is the length of the utx_host string */ |
| utx->ut_syslen = MIN(strlen(li->hostname), sizeof(utx->ut_host)); |
| # endif |
| } |
| #endif /* USE_UTMPX || USE_WTMPX */ |
| |
| /** |
| ** Low-level utmp functions |
| **/ |
| |
| /* FIXME: (ATL) utmp_write_direct needs testing */ |
| #ifdef USE_UTMP |
| |
| /* if we can, use pututline() etc. */ |
| # if !defined(DISABLE_PUTUTLINE) && defined(HAVE_SETUTENT) && \ |
| defined(HAVE_PUTUTLINE) |
| # define UTMP_USE_LIBRARY |
| # endif |
| |
| |
| /* write a utmp entry with the system's help (pututline() and pals) */ |
| # ifdef UTMP_USE_LIBRARY |
| static int |
| utmp_write_library(struct logininfo *li, struct utmp *ut) |
| { |
| setutent(); |
| pututline(ut); |
| # ifdef HAVE_ENDUTENT |
| endutent(); |
| # endif |
| return (1); |
| } |
| # else /* UTMP_USE_LIBRARY */ |
| |
| /* |
| * Write a utmp entry direct to the file |
| * This is a slightly modification of code in OpenBSD's login.c |
| */ |
| static int |
| utmp_write_direct(struct logininfo *li, struct utmp *ut) |
| { |
| struct utmp old_ut; |
| register int fd; |
| int tty; |
| |
| /* FIXME: (ATL) ttyslot() needs local implementation */ |
| |
| #if defined(HAVE_GETTTYENT) |
| struct ttyent *ty; |
| |
| tty=0; |
| setttyent(); |
| while (NULL != (ty = getttyent())) { |
| tty++; |
| if (!strncmp(ty->ty_name, ut->ut_line, sizeof(ut->ut_line))) |
| break; |
| } |
| endttyent(); |
| |
| if (NULL == ty) { |
| logit("%s: tty not found", __func__); |
| return (0); |
| } |
| #else /* FIXME */ |
| |
| tty = ttyslot(); /* seems only to work for /dev/ttyp? style names */ |
| |
| #endif /* HAVE_GETTTYENT */ |
| |
| if (tty > 0 && (fd = open(UTMP_FILE, O_RDWR|O_CREAT, 0644)) >= 0) { |
| off_t pos, ret; |
| |
| pos = (off_t)tty * sizeof(struct utmp); |
| if ((ret = lseek(fd, pos, SEEK_SET)) == -1) { |
| logit("%s: lseek: %s", __func__, strerror(errno)); |
| close(fd); |
| return (0); |
| } |
| if (ret != pos) { |
| logit("%s: Couldn't seek to tty %d slot in %s", |
| __func__, tty, UTMP_FILE); |
| close(fd); |
| return (0); |
| } |
| /* |
| * Prevent luser from zero'ing out ut_host. |
| * If the new ut_line is empty but the old one is not |
| * and ut_line and ut_name match, preserve the old ut_line. |
| */ |
| if (atomicio(read, fd, &old_ut, sizeof(old_ut)) == sizeof(old_ut) && |
| (ut->ut_host[0] == '\0') && (old_ut.ut_host[0] != '\0') && |
| (strncmp(old_ut.ut_line, ut->ut_line, sizeof(ut->ut_line)) == 0) && |
| (strncmp(old_ut.ut_name, ut->ut_name, sizeof(ut->ut_name)) == 0)) |
| memcpy(ut->ut_host, old_ut.ut_host, sizeof(ut->ut_host)); |
| |
| if ((ret = lseek(fd, pos, SEEK_SET)) == -1) { |
| logit("%s: lseek: %s", __func__, strerror(errno)); |
| close(fd); |
| return (0); |
| } |
| if (ret != pos) { |
| logit("%s: Couldn't seek to tty %d slot in %s", |
| __func__, tty, UTMP_FILE); |
| close(fd); |
| return (0); |
| } |
| if (atomicio(vwrite, fd, ut, sizeof(*ut)) != sizeof(*ut)) { |
| logit("%s: error writing %s: %s", __func__, |
| UTMP_FILE, strerror(errno)); |
| close(fd); |
| return (0); |
| } |
| |
| close(fd); |
| return (1); |
| } else { |
| return (0); |
| } |
| } |
| # endif /* UTMP_USE_LIBRARY */ |
| |
| static int |
| utmp_perform_login(struct logininfo *li) |
| { |
| struct utmp ut; |
| |
| construct_utmp(li, &ut); |
| # ifdef UTMP_USE_LIBRARY |
| if (!utmp_write_library(li, &ut)) { |
| logit("%s: utmp_write_library() failed", __func__); |
| return (0); |
| } |
| # else |
| if (!utmp_write_direct(li, &ut)) { |
| logit("%s: utmp_write_direct() failed", __func__); |
| return (0); |
| } |
| # endif |
| return (1); |
| } |
| |
| |
| static int |
| utmp_perform_logout(struct logininfo *li) |
| { |
| struct utmp ut; |
| |
| construct_utmp(li, &ut); |
| # ifdef UTMP_USE_LIBRARY |
| if (!utmp_write_library(li, &ut)) { |
| logit("%s: utmp_write_library() failed", __func__); |
| return (0); |
| } |
| # else |
| if (!utmp_write_direct(li, &ut)) { |
| logit("%s: utmp_write_direct() failed", __func__); |
| return (0); |
| } |
| # endif |
| return (1); |
| } |
| |
| |
| int |
| utmp_write_entry(struct logininfo *li) |
| { |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| return (utmp_perform_login(li)); |
| |
| case LTYPE_LOGOUT: |
| return (utmp_perform_logout(li)); |
| |
| default: |
| logit("%s: invalid type field", __func__); |
| return (0); |
| } |
| } |
| #endif /* USE_UTMP */ |
| |
| |
| /** |
| ** Low-level utmpx functions |
| **/ |
| |
| /* not much point if we don't want utmpx entries */ |
| #ifdef USE_UTMPX |
| |
| /* if we have the wherewithall, use pututxline etc. */ |
| # if !defined(DISABLE_PUTUTXLINE) && defined(HAVE_SETUTXENT) && \ |
| defined(HAVE_PUTUTXLINE) |
| # define UTMPX_USE_LIBRARY |
| # endif |
| |
| |
| /* write a utmpx entry with the system's help (pututxline() and pals) */ |
| # ifdef UTMPX_USE_LIBRARY |
| static int |
| utmpx_write_library(struct logininfo *li, struct utmpx *utx) |
| { |
| setutxent(); |
| pututxline(utx); |
| |
| # ifdef HAVE_ENDUTXENT |
| endutxent(); |
| # endif |
| return (1); |
| } |
| |
| # else /* UTMPX_USE_LIBRARY */ |
| |
| /* write a utmp entry direct to the file */ |
| static int |
| utmpx_write_direct(struct logininfo *li, struct utmpx *utx) |
| { |
| logit("%s: not implemented!", __func__); |
| return (0); |
| } |
| # endif /* UTMPX_USE_LIBRARY */ |
| |
| static int |
| utmpx_perform_login(struct logininfo *li) |
| { |
| struct utmpx utx; |
| |
| construct_utmpx(li, &utx); |
| # ifdef UTMPX_USE_LIBRARY |
| if (!utmpx_write_library(li, &utx)) { |
| logit("%s: utmp_write_library() failed", __func__); |
| return (0); |
| } |
| # else |
| if (!utmpx_write_direct(li, &ut)) { |
| logit("%s: utmp_write_direct() failed", __func__); |
| return (0); |
| } |
| # endif |
| return (1); |
| } |
| |
| |
| static int |
| utmpx_perform_logout(struct logininfo *li) |
| { |
| struct utmpx utx; |
| |
| construct_utmpx(li, &utx); |
| # ifdef HAVE_ID_IN_UTMPX |
| line_abbrevname(utx.ut_id, li->line, sizeof(utx.ut_id)); |
| # endif |
| # ifdef HAVE_TYPE_IN_UTMPX |
| utx.ut_type = DEAD_PROCESS; |
| # endif |
| |
| # ifdef UTMPX_USE_LIBRARY |
| utmpx_write_library(li, &utx); |
| # else |
| utmpx_write_direct(li, &utx); |
| # endif |
| return (1); |
| } |
| |
| int |
| utmpx_write_entry(struct logininfo *li) |
| { |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| return (utmpx_perform_login(li)); |
| case LTYPE_LOGOUT: |
| return (utmpx_perform_logout(li)); |
| default: |
| logit("%s: invalid type field", __func__); |
| return (0); |
| } |
| } |
| #endif /* USE_UTMPX */ |
| |
| |
| /** |
| ** Low-level wtmp functions |
| **/ |
| |
| #ifdef USE_WTMP |
| |
| /* |
| * Write a wtmp entry direct to the end of the file |
| * This is a slight modification of code in OpenBSD's logwtmp.c |
| */ |
| static int |
| wtmp_write(struct logininfo *li, struct utmp *ut) |
| { |
| struct stat buf; |
| int fd, ret = 1; |
| |
| if ((fd = open(WTMP_FILE, O_WRONLY|O_APPEND, 0)) < 0) { |
| logit("%s: problem writing %s: %s", __func__, |
| WTMP_FILE, strerror(errno)); |
| return (0); |
| } |
| if (fstat(fd, &buf) == 0) |
| if (atomicio(vwrite, fd, ut, sizeof(*ut)) != sizeof(*ut)) { |
| ftruncate(fd, buf.st_size); |
| logit("%s: problem writing %s: %s", __func__, |
| WTMP_FILE, strerror(errno)); |
| ret = 0; |
| } |
| close(fd); |
| return (ret); |
| } |
| |
| static int |
| wtmp_perform_login(struct logininfo *li) |
| { |
| struct utmp ut; |
| |
| construct_utmp(li, &ut); |
| return (wtmp_write(li, &ut)); |
| } |
| |
| |
| static int |
| wtmp_perform_logout(struct logininfo *li) |
| { |
| struct utmp ut; |
| |
| construct_utmp(li, &ut); |
| return (wtmp_write(li, &ut)); |
| } |
| |
| |
| int |
| wtmp_write_entry(struct logininfo *li) |
| { |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| return (wtmp_perform_login(li)); |
| case LTYPE_LOGOUT: |
| return (wtmp_perform_logout(li)); |
| default: |
| logit("%s: invalid type field", __func__); |
| return (0); |
| } |
| } |
| |
| |
| /* |
| * Notes on fetching login data from wtmp/wtmpx |
| * |
| * Logouts are usually recorded with (amongst other things) a blank |
| * username on a given tty line. However, some systems (HP-UX is one) |
| * leave all fields set, but change the ut_type field to DEAD_PROCESS. |
| * |
| * Since we're only looking for logins here, we know that the username |
| * must be set correctly. On systems that leave it in, we check for |
| * ut_type==USER_PROCESS (indicating a login.) |
| * |
| * Portability: Some systems may set something other than USER_PROCESS |
| * to indicate a login process. I don't know of any as I write. Also, |
| * it's possible that some systems may both leave the username in |
| * place and not have ut_type. |
| */ |
| |
| /* return true if this wtmp entry indicates a login */ |
| static int |
| wtmp_islogin(struct logininfo *li, struct utmp *ut) |
| { |
| if (strncmp(li->username, ut->ut_name, |
| MIN_SIZEOF(li->username, ut->ut_name)) == 0) { |
| # ifdef HAVE_TYPE_IN_UTMP |
| if (ut->ut_type & USER_PROCESS) |
| return (1); |
| # else |
| return (1); |
| # endif |
| } |
| return (0); |
| } |
| |
| int |
| wtmp_get_entry(struct logininfo *li) |
| { |
| struct stat st; |
| struct utmp ut; |
| int fd, found = 0; |
| |
| /* Clear the time entries in our logininfo */ |
| li->tv_sec = li->tv_usec = 0; |
| |
| if ((fd = open(WTMP_FILE, O_RDONLY)) < 0) { |
| logit("%s: problem opening %s: %s", __func__, |
| WTMP_FILE, strerror(errno)); |
| return (0); |
| } |
| if (fstat(fd, &st) != 0) { |
| logit("%s: couldn't stat %s: %s", __func__, |
| WTMP_FILE, strerror(errno)); |
| close(fd); |
| return (0); |
| } |
| |
| /* Seek to the start of the last struct utmp */ |
| if (lseek(fd, -(off_t)sizeof(struct utmp), SEEK_END) == -1) { |
| /* Looks like we've got a fresh wtmp file */ |
| close(fd); |
| return (0); |
| } |
| |
| while (!found) { |
| if (atomicio(read, fd, &ut, sizeof(ut)) != sizeof(ut)) { |
| logit("%s: read of %s failed: %s", __func__, |
| WTMP_FILE, strerror(errno)); |
| close (fd); |
| return (0); |
| } |
| if (wtmp_islogin(li, &ut) ) { |
| found = 1; |
| /* |
| * We've already checked for a time in struct |
| * utmp, in login_getlast() |
| */ |
| # ifdef HAVE_TIME_IN_UTMP |
| li->tv_sec = ut.ut_time; |
| # else |
| # if HAVE_TV_IN_UTMP |
| li->tv_sec = ut.ut_tv.tv_sec; |
| # endif |
| # endif |
| line_fullname(li->line, ut.ut_line, |
| MIN_SIZEOF(li->line, ut.ut_line)); |
| # ifdef HAVE_HOST_IN_UTMP |
| strlcpy(li->hostname, ut.ut_host, |
| MIN_SIZEOF(li->hostname, ut.ut_host)); |
| # endif |
| continue; |
| } |
| /* Seek back 2 x struct utmp */ |
| if (lseek(fd, -(off_t)(2 * sizeof(struct utmp)), SEEK_CUR) == -1) { |
| /* We've found the start of the file, so quit */ |
| close(fd); |
| return (0); |
| } |
| } |
| |
| /* We found an entry. Tidy up and return */ |
| close(fd); |
| return (1); |
| } |
| # endif /* USE_WTMP */ |
| |
| |
| /** |
| ** Low-level wtmpx functions |
| **/ |
| |
| #ifdef USE_WTMPX |
| /* |
| * Write a wtmpx entry direct to the end of the file |
| * This is a slight modification of code in OpenBSD's logwtmp.c |
| */ |
| static int |
| wtmpx_write(struct logininfo *li, struct utmpx *utx) |
| { |
| #ifndef HAVE_UPDWTMPX |
| struct stat buf; |
| int fd, ret = 1; |
| |
| if ((fd = open(WTMPX_FILE, O_WRONLY|O_APPEND, 0)) < 0) { |
| logit("%s: problem opening %s: %s", __func__, |
| WTMPX_FILE, strerror(errno)); |
| return (0); |
| } |
| |
| if (fstat(fd, &buf) == 0) |
| if (atomicio(vwrite, fd, utx, sizeof(*utx)) != sizeof(*utx)) { |
| ftruncate(fd, buf.st_size); |
| logit("%s: problem writing %s: %s", __func__, |
| WTMPX_FILE, strerror(errno)); |
| ret = 0; |
| } |
| close(fd); |
| |
| return (ret); |
| #else |
| updwtmpx(WTMPX_FILE, utx); |
| return (1); |
| #endif |
| } |
| |
| |
| static int |
| wtmpx_perform_login(struct logininfo *li) |
| { |
| struct utmpx utx; |
| |
| construct_utmpx(li, &utx); |
| return (wtmpx_write(li, &utx)); |
| } |
| |
| |
| static int |
| wtmpx_perform_logout(struct logininfo *li) |
| { |
| struct utmpx utx; |
| |
| construct_utmpx(li, &utx); |
| return (wtmpx_write(li, &utx)); |
| } |
| |
| |
| int |
| wtmpx_write_entry(struct logininfo *li) |
| { |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| return (wtmpx_perform_login(li)); |
| case LTYPE_LOGOUT: |
| return (wtmpx_perform_logout(li)); |
| default: |
| logit("%s: invalid type field", __func__); |
| return (0); |
| } |
| } |
| |
| /* Please see the notes above wtmp_islogin() for information about the |
| next two functions */ |
| |
| /* Return true if this wtmpx entry indicates a login */ |
| static int |
| wtmpx_islogin(struct logininfo *li, struct utmpx *utx) |
| { |
| if (strncmp(li->username, utx->ut_user, |
| MIN_SIZEOF(li->username, utx->ut_user)) == 0 ) { |
| # ifdef HAVE_TYPE_IN_UTMPX |
| if (utx->ut_type == USER_PROCESS) |
| return (1); |
| # else |
| return (1); |
| # endif |
| } |
| return (0); |
| } |
| |
| |
| int |
| wtmpx_get_entry(struct logininfo *li) |
| { |
| struct stat st; |
| struct utmpx utx; |
| int fd, found=0; |
| |
| /* Clear the time entries */ |
| li->tv_sec = li->tv_usec = 0; |
| |
| if ((fd = open(WTMPX_FILE, O_RDONLY)) < 0) { |
| logit("%s: problem opening %s: %s", __func__, |
| WTMPX_FILE, strerror(errno)); |
| return (0); |
| } |
| if (fstat(fd, &st) != 0) { |
| logit("%s: couldn't stat %s: %s", __func__, |
| WTMPX_FILE, strerror(errno)); |
| close(fd); |
| return (0); |
| } |
| |
| /* Seek to the start of the last struct utmpx */ |
| if (lseek(fd, -(off_t)sizeof(struct utmpx), SEEK_END) == -1 ) { |
| /* probably a newly rotated wtmpx file */ |
| close(fd); |
| return (0); |
| } |
| |
| while (!found) { |
| if (atomicio(read, fd, &utx, sizeof(utx)) != sizeof(utx)) { |
| logit("%s: read of %s failed: %s", __func__, |
| WTMPX_FILE, strerror(errno)); |
| close (fd); |
| return (0); |
| } |
| /* |
| * Logouts are recorded as a blank username on a particular |
| * line. So, we just need to find the username in struct utmpx |
| */ |
| if (wtmpx_islogin(li, &utx)) { |
| found = 1; |
| # if defined(HAVE_TV_IN_UTMPX) |
| li->tv_sec = utx.ut_tv.tv_sec; |
| # elif defined(HAVE_TIME_IN_UTMPX) |
| li->tv_sec = utx.ut_time; |
| # endif |
| line_fullname(li->line, utx.ut_line, sizeof(li->line)); |
| # if defined(HAVE_HOST_IN_UTMPX) |
| strlcpy(li->hostname, utx.ut_host, |
| MIN_SIZEOF(li->hostname, utx.ut_host)); |
| # endif |
| continue; |
| } |
| if (lseek(fd, -(off_t)(2 * sizeof(struct utmpx)), SEEK_CUR) == -1) { |
| close(fd); |
| return (0); |
| } |
| } |
| |
| close(fd); |
| return (1); |
| } |
| #endif /* USE_WTMPX */ |
| |
| /** |
| ** Low-level libutil login() functions |
| **/ |
| |
| #ifdef USE_LOGIN |
| static int |
| syslogin_perform_login(struct logininfo *li) |
| { |
| struct utmp *ut; |
| |
| ut = xmalloc(sizeof(*ut)); |
| construct_utmp(li, ut); |
| login(ut); |
| free(ut); |
| |
| return (1); |
| } |
| |
| static int |
| syslogin_perform_logout(struct logininfo *li) |
| { |
| # ifdef HAVE_LOGOUT |
| char line[UT_LINESIZE]; |
| |
| (void)line_stripname(line, li->line, sizeof(line)); |
| |
| if (!logout(line)) |
| logit("%s: logout() returned an error", __func__); |
| # ifdef HAVE_LOGWTMP |
| else |
| logwtmp(line, "", ""); |
| # endif |
| /* FIXME: (ATL - if the need arises) What to do if we have |
| * login, but no logout? what if logout but no logwtmp? All |
| * routines are in libutil so they should all be there, |
| * but... */ |
| # endif |
| return (1); |
| } |
| |
| int |
| syslogin_write_entry(struct logininfo *li) |
| { |
| switch (li->type) { |
| case LTYPE_LOGIN: |
| return (syslogin_perform_login(li)); |
| case LTYPE_LOGOUT: |
| return (syslogin_perform_logout(li)); |
| default: |
| logit("%s: Invalid type field", __func__); |
| return (0); |
| } |
| } |
| #endif /* USE_LOGIN */ |
| |
| /* end of file log-syslogin.c */ |
| |
| /** |
| ** Low-level lastlog functions |
| **/ |
| |
| #ifdef USE_LASTLOG |
| |
| #if !defined(LASTLOG_WRITE_PUTUTXLINE) || !defined(HAVE_GETLASTLOGXBYNAME) |
| /* open the file (using filemode) and seek to the login entry */ |
| static int |
| lastlog_openseek(struct logininfo *li, int *fd, int filemode) |
| { |
| off_t offset; |
| char lastlog_file[1024]; |
| struct stat st; |
| |
| if (stat(LASTLOG_FILE, &st) != 0) { |
| logit("%s: Couldn't stat %s: %s", __func__, |
| LASTLOG_FILE, strerror(errno)); |
| return (0); |
| } |
| if (S_ISDIR(st.st_mode)) { |
| snprintf(lastlog_file, sizeof(lastlog_file), "%s/%s", |
| LASTLOG_FILE, li->username); |
| } else if (S_ISREG(st.st_mode)) { |
| strlcpy(lastlog_file, LASTLOG_FILE, sizeof(lastlog_file)); |
| } else { |
| logit("%s: %.100s is not a file or directory!", __func__, |
| LASTLOG_FILE); |
| return (0); |
| } |
| |
| *fd = open(lastlog_file, filemode, 0600); |
| if (*fd < 0) { |
| debug("%s: Couldn't open %s: %s", __func__, |
| lastlog_file, strerror(errno)); |
| return (0); |
| } |
| |
| if (S_ISREG(st.st_mode)) { |
| /* find this uid's offset in the lastlog file */ |
| offset = (off_t) ((u_long)li->uid * sizeof(struct lastlog)); |
| |
| if (lseek(*fd, offset, SEEK_SET) != offset) { |
| logit("%s: %s->lseek(): %s", __func__, |
| lastlog_file, strerror(errno)); |
| close(*fd); |
| return (0); |
| } |
| } |
| |
| return (1); |
| } |
| #endif /* !LASTLOG_WRITE_PUTUTXLINE || !HAVE_GETLASTLOGXBYNAME */ |
| |
| #ifdef LASTLOG_WRITE_PUTUTXLINE |
| int |
| lastlog_write_entry(struct logininfo *li) |
| { |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| return 1; /* lastlog written by pututxline */ |
| default: |
| logit("lastlog_write_entry: Invalid type field"); |
| return 0; |
| } |
| } |
| #else /* LASTLOG_WRITE_PUTUTXLINE */ |
| int |
| lastlog_write_entry(struct logininfo *li) |
| { |
| struct lastlog last; |
| int fd; |
| |
| switch(li->type) { |
| case LTYPE_LOGIN: |
| /* create our struct lastlog */ |
| memset(&last, '\0', sizeof(last)); |
| line_stripname(last.ll_line, li->line, sizeof(last.ll_line)); |
| strlcpy(last.ll_host, li->hostname, |
| MIN_SIZEOF(last.ll_host, li->hostname)); |
| last.ll_time = li->tv_sec; |
| |
| if (!lastlog_openseek(li, &fd, O_RDWR|O_CREAT)) |
| return (0); |
| |
| /* write the entry */ |
| if (atomicio(vwrite, fd, &last, sizeof(last)) != sizeof(last)) { |
| close(fd); |
| logit("%s: Error writing to %s: %s", __func__, |
| LASTLOG_FILE, strerror(errno)); |
| return (0); |
| } |
| |
| close(fd); |
| return (1); |
| default: |
| logit("%s: Invalid type field", __func__); |
| return (0); |
| } |
| } |
| #endif /* LASTLOG_WRITE_PUTUTXLINE */ |
| |
| #ifdef HAVE_GETLASTLOGXBYNAME |
| int |
| lastlog_get_entry(struct logininfo *li) |
| { |
| struct lastlogx l, *ll; |
| |
| if ((ll = getlastlogxbyname(li->username, &l)) == NULL) { |
| memset(&l, '\0', sizeof(l)); |
| ll = &l; |
| } |
| line_fullname(li->line, ll->ll_line, sizeof(li->line)); |
| strlcpy(li->hostname, ll->ll_host, |
| MIN_SIZEOF(li->hostname, ll->ll_host)); |
| li->tv_sec = ll->ll_tv.tv_sec; |
| li->tv_usec = ll->ll_tv.tv_usec; |
| return (1); |
| } |
| #else /* HAVE_GETLASTLOGXBYNAME */ |
| int |
| lastlog_get_entry(struct logininfo *li) |
| { |
| struct lastlog last; |
| int fd, ret; |
| |
| if (!lastlog_openseek(li, &fd, O_RDONLY)) |
| return (0); |
| |
| ret = atomicio(read, fd, &last, sizeof(last)); |
| close(fd); |
| |
| switch (ret) { |
| case 0: |
| memset(&last, '\0', sizeof(last)); |
| /* FALLTHRU */ |
| case sizeof(last): |
| line_fullname(li->line, last.ll_line, sizeof(li->line)); |
| strlcpy(li->hostname, last.ll_host, |
| MIN_SIZEOF(li->hostname, last.ll_host)); |
| li->tv_sec = last.ll_time; |
| return (1); |
| case -1: |
| error("%s: Error reading from %s: %s", __func__, |
| LASTLOG_FILE, strerror(errno)); |
| return (0); |
| default: |
| error("%s: Error reading from %s: Expecting %d, got %d", |
| __func__, LASTLOG_FILE, (int)sizeof(last), ret); |
| return (0); |
| } |
| |
| /* NOTREACHED */ |
| return (0); |
| } |
| #endif /* HAVE_GETLASTLOGXBYNAME */ |
| #endif /* USE_LASTLOG */ |
| |
| #if defined(USE_UTMPX) && defined(HAVE_SETUTXDB) && \ |
| defined(UTXDB_LASTLOGIN) && defined(HAVE_GETUTXUSER) |
| int |
| utmpx_get_entry(struct logininfo *li) |
| { |
| struct utmpx *utx; |
| |
| if (setutxdb(UTXDB_LASTLOGIN, NULL) != 0) |
| return (0); |
| utx = getutxuser(li->username); |
| if (utx == NULL) { |
| endutxent(); |
| return (0); |
| } |
| |
| line_fullname(li->line, utx->ut_line, |
| MIN_SIZEOF(li->line, utx->ut_line)); |
| strlcpy(li->hostname, utx->ut_host, |
| MIN_SIZEOF(li->hostname, utx->ut_host)); |
| li->tv_sec = utx->ut_tv.tv_sec; |
| li->tv_usec = utx->ut_tv.tv_usec; |
| endutxent(); |
| return (1); |
| } |
| #endif /* USE_UTMPX && HAVE_SETUTXDB && UTXDB_LASTLOGIN && HAVE_GETUTXUSER */ |
| |
| #ifdef USE_BTMP |
| /* |
| * Logs failed login attempts in _PATH_BTMP if that exists. |
| * The most common login failure is to give password instead of username. |
| * So the _PATH_BTMP file checked for the correct permission, so that |
| * only root can read it. |
| */ |
| |
| void |
| record_failed_login(const char *username, const char *hostname, |
| const char *ttyn) |
| { |
| int fd; |
| struct utmp ut; |
| struct sockaddr_storage from; |
| socklen_t fromlen = sizeof(from); |
| struct sockaddr_in *a4; |
| struct sockaddr_in6 *a6; |
| time_t t; |
| struct stat fst; |
| |
| if (geteuid() != 0) |
| return; |
| if ((fd = open(_PATH_BTMP, O_WRONLY | O_APPEND)) < 0) { |
| debug("Unable to open the btmp file %s: %s", _PATH_BTMP, |
| strerror(errno)); |
| return; |
| } |
| if (fstat(fd, &fst) < 0) { |
| logit("%s: fstat of %s failed: %s", __func__, _PATH_BTMP, |
| strerror(errno)); |
| goto out; |
| } |
| if((fst.st_mode & (S_IXGRP | S_IRWXO)) || (fst.st_uid != 0)){ |
| logit("Excess permission or bad ownership on file %s", |
| _PATH_BTMP); |
| goto out; |
| } |
| |
| memset(&ut, 0, sizeof(ut)); |
| /* strncpy because we don't necessarily want nul termination */ |
| strncpy(ut.ut_user, username, sizeof(ut.ut_user)); |
| strlcpy(ut.ut_line, "ssh:notty", sizeof(ut.ut_line)); |
| |
| time(&t); |
| ut.ut_time = t; /* ut_time is not always a time_t */ |
| ut.ut_type = LOGIN_PROCESS; |
| ut.ut_pid = getpid(); |
| |
| /* strncpy because we don't necessarily want nul termination */ |
| strncpy(ut.ut_host, hostname, sizeof(ut.ut_host)); |
| |
| if (packet_connection_is_on_socket() && |
| getpeername(packet_get_connection_in(), |
| (struct sockaddr *)&from, &fromlen) == 0) { |
| ipv64_normalise_mapped(&from, &fromlen); |
| if (from.ss_family == AF_INET) { |
| a4 = (struct sockaddr_in *)&from; |
| memcpy(&ut.ut_addr, &(a4->sin_addr), |
| MIN_SIZEOF(ut.ut_addr, a4->sin_addr)); |
| } |
| #ifdef HAVE_ADDR_V6_IN_UTMP |
| if (from.ss_family == AF_INET6) { |
| a6 = (struct sockaddr_in6 *)&from; |
| memcpy(&ut.ut_addr_v6, &(a6->sin6_addr), |
| MIN_SIZEOF(ut.ut_addr_v6, a6->sin6_addr)); |
| } |
| #endif |
| } |
| |
| if (atomicio(vwrite, fd, &ut, sizeof(ut)) != sizeof(ut)) |
| error("Failed to write to %s: %s", _PATH_BTMP, |
| strerror(errno)); |
| |
| out: |
| close(fd); |
| } |
| #endif /* USE_BTMP */ |