blob: cc1ff233da56b3a0de34209fde70f673e67fd8f3 [file] [log] [blame]
# Process this file with bootstrap to produce a configure script.
# autoconf requirement
AC_PREREQ([2.53])
# Note: in case of beta subversion, use underscore "_" rather then dash "-"
# since RPM doesn't allow dash in Version
# Example: 5.0_beta2
AC_INIT([monit], [5.4], [monit-general@nongnu.org])
AC_CONFIG_AUX_DIR(config)
AC_CONFIG_MACRO_DIR([m4])
AM_INIT_AUTOMAKE
AC_CONFIG_SRCDIR([src/monit.c])
AC_CONFIG_SUBDIRS([libmonit])
AC_CONFIG_COMMANDS([libtool_patch],[test `uname` = "OpenBSD" && perl -p -i -e "s/deplibs_check_method=.*/deplibs_check_method=pass_all/g" libtool])
# ------------------------------------------------------------------------
# Programs
# ------------------------------------------------------------------------
AC_PROG_CC
AC_PROG_INSTALL
AC_PROG_MAKE_SET
AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [no], [$PATH:/usr/local/bin:/usr/bin])
if test "x$YACC" = "xno"; then
# Require bison unless y.tab.c already is built
if test ! -f src/y.tab.c; then
AC_MSG_ERROR([Monit require bison, byacc or yacc. Download bison from http://www.gnu.org/software/bison/])
fi
fi
AC_PATH_PROG([FLEX], [flex], [no], [$PATH:/usr/local/bin:/usr/bin])
if test "x$FLEX" = "xno"; then
# Require flex unless lex.yy.c already is built
if test ! -f src/lex.yy.c; then
AC_MSG_RESULT([flex is required. Download from http://www.gnu.org/software/flex/])
fi
fi
AC_PATH_PROG([POD2MAN], [pod2man], [no], [$PATH:/usr/local/bin:/usr/bin])
if test "x$POD2MAN" = "xno"; then
# Require pod2man unless monit.1 already is built
if test ! -f monit.1; then
AC_MSG_ERROR([pod2man is required to build the monit.1 man file.])
fi
else
d=`date '+%B %d. %Y'`
POD2MANFLAGS="--center 'User Commands' --release '${d}' --date='www.mmonit.com' --lax"
AC_SUBST([POD2MANFLAGS])
fi
# ------------------------------------------------------------------------
# Libtool
# ------------------------------------------------------------------------
AC_DISABLE_STATIC
AC_PROG_LIBTOOL
# ---------------------------------------------------------------------------
# Build options
# ---------------------------------------------------------------------------
AC_ARG_ENABLE(optimized,
AS_HELP_STRING([--enable-optimized],
[Build software optimized]),
[
CFLAGS=`echo $CFLAGS|sed 's/-O.//'`
if test "x$enableval" = "xyes" ; then
CFLAGS=`echo $CFLAGS|sed 's/-g//'`
CFLAGS="$CFLAGS -O3"
OPTIMIZED=1
else
OPTIMIZED=0
fi
],
[
OPTIMIZED=0
]
)
# ------------------------------------------------------------------------
# Libraries
# ------------------------------------------------------------------------
# Check for libraries
AC_CHECK_LIB([socket], [socket])
AC_CHECK_LIB([inet], [socket])
AC_CHECK_LIB([nsl], [inet_addr])
AC_CHECK_LIB([resolv], [inet_aton])
AC_CHECK_LIB([c], [crypt], [:], [AC_CHECK_LIB([crypt], [crypt])])
AC_CHECK_LIB([pthread], [pthread_create], [], [AC_MSG_ERROR([POSIX thread library is required])])
# ------------------------------------------------------------------------
# Header files
# ------------------------------------------------------------------------
AC_HEADER_STDC
AC_HEADER_SYS_WAIT
AC_HEADER_STAT
AC_HEADER_TIME
AC_CHECK_HEADERS([ \
alloca.h \
arpa/inet.h \
asm/page.h \
asm/param.h \
cf.h \
crt_externs.h \
ctype.h \
crypt.h \
dirent.h \
errno.h \
execinfo.h \
fcntl.h \
getopt.h \
glob.h \
grp.h \
kvm.h \
paths.h \
kstat.h \
sys/protosw.h \
limits.h \
loadavg.h \
locale.h \
mach/host_info.h \
mach/mach.h \
mach/mach_host.h \
memory.h \
mntent.h \
netdb.h \
sys/socket.h \
netinet/in.h \
netinet/in_systm.h \
pam/pam_appl.h \
security/pam_appl.h \
poll.h \
procfs.h \
sys/procfs.h \
procinfo.h \
pthread.h \
pwd.h \
regex.h \
setjmp.h \
signal.h \
stdarg.h \
stddef.h \
stdio.h \
string.h \
strings.h \
stropts.h \
sys/cfgodm.h \
sys/cfgdb.h \
sys/dk.h \
sys/dkstat.h \
sys/filio.h \
sys/ioctl.h \
sys/loadavg.h \
sys/lock.h \
sys/mnttab.h \
sys/mutex.h \
sys/nlist.h \
sys/param.h \
sys/pstat.h \
sys/queue.h \
sys/resource.h \
sys/statfs.h \
sys/statvfs.h \
sys/sysinfo.h \
sys/systemcfg.h \
sys/time.h \
sys/tree.h \
sys/types.h \
sys/un.h \
sys/utsname.h \
sys/vmmeter.h \
sys/vfs.h \
syslog.h \
unistd.h \
uvm/uvm.h \
uvm/uvm_extern.h \
vm/vm.h \
])
AC_CHECK_HEADERS([ \
libperfstat.h \
],
[],
[],
[
#ifdef HAVE_SYS_PROTOSW_H
#include <sys/protosw.h>
#endif
])
AC_CHECK_HEADERS([ \
netinet/ip.h \
],
[],
[],
[
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#if HAVE_NETINET_IN_SYSTM_H
#include <netinet/in_systm.h>
#endif
#if HAVE_NETINET_IN_SYSTM_H
#include <netinet/in.h>
#endif
])
AC_CHECK_HEADERS([ \
net/if.h \
netinet/ip_icmp.h \
],
[],
[],
[
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#if HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#if HAVE_NETINET_IN_SYSTM_H
#include <netinet/in.h>
#endif
#if HAVE_NETINET_IN_SYSTM_H
#include <netinet/in_systm.h>
#endif
#if HAVE_NETINET_IP_H
#include <netinet/ip.h>
#endif
])
AC_CHECK_HEADERS([ \
sys/sysctl.h \
sys/mount.h \
sys/proc.h \
sys/swap.h \
sys/ucred.h \
sys/user.h \
],
[],
[],
[
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
])
AC_CHECK_HEADERS([ \
machine/vmparam.h \
vm/pmap.h \
machine/pmap.h \
vm/vm_map.h \
vm/vm_object.h \
],
[],
[],
[
#ifdef HAVE_SYS_PARAM_H
#include <sys/param.h>
#endif
#ifdef HAVE_SYS_QUEUE_H
#include <sys/queue.h>
#endif
#ifdef HAVE_SYS_LOCK_H
#include <sys/lock.h>
#endif
#ifdef HAVE_SYS_MUTEX_H
#include <sys/mutex.h>
#endif
#ifdef HAVE_VM_VM_H
#include <vm/vm.h>
#endif
#ifdef HAVE_VM_PMAP_H
#include <vm/pmap.h>
#endif
])
AC_CHECK_HEADERS([ \
sys/resourcevar.h \
],
[],
[],
[
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
])
AC_CHECK_HEADERS([ \
uvm/uvm_map.h \
uvm/uvm_pmap.h \
uvm/uvm_object.h \
],
[],
[],
[
#ifdef HAVE_SYS_TIME_H
#include <sys/time.h>
#endif
#ifdef HAVE_SYS_LOCK_H
#include <sys/lock.h>
#endif
#ifdef HAVE_SYS_TREE_H
#include <sys/tree.h>
#endif
#ifdef HAVE_UVM_UVM_EXTERN_H
#include <uvm/uvm_extern.h>
#endif
])
# Check for types.
AC_TYPE_MODE_T
AC_TYPE_PID_T
AC_TYPE_SIZE_T
AC_TYPE_PID_T
AC_TYPE_SIGNAL
# Check for structures.
AC_STRUCT_TM
AC_CHECK_MEMBERS([struct tm.tm_gmtoff])
# ------------------------------------------------------------------------
# Functions
# ------------------------------------------------------------------------
# Checks for library functions.
AC_FUNC_ERROR_AT_LINE
AC_FUNC_FORK
AC_FUNC_STAT
AC_FUNC_STRFTIME
AC_CHECK_FUNCS(statfs)
AC_CHECK_FUNCS(statvfs)
AC_CHECK_FUNCS(setlocale)
AC_CHECK_FUNCS(getaddrinfo)
AC_CHECK_FUNCS(syslog)
AC_CHECK_FUNCS(vsyslog)
AC_CHECK_FUNCS(backtrace)
AC_CHECK_FUNCS(getloadavg)
# Check for SOL_IP
AC_MSG_CHECKING(for SOL_IP)
AC_TRY_COMPILE([
#include <netdb.h>
#include <sys/socket.h>],
[int level = SOL_IP;],
[AC_MSG_RESULT(yes)
AC_DEFINE([HAVE_SOL_IP], [1], [Define to 1 if SOL_IP is defined.])],
[AC_MSG_RESULT(no)])
AC_MSG_CHECKING(for va_copy)
AC_TRY_LINK([
#include <stdarg.h>
], [
va_list ap;
va_list ap_copy;
va_copy(ap, ap_copy);
], [
AC_MSG_RESULT(yes)
AC_DEFINE([HAVE_VA_COPY], [1], [Define to 1 if VA_COPY is defined.])
], [
AC_MSG_RESULT(no)
])
# ------------------------------------------------------------------------
# Compiler
# ------------------------------------------------------------------------
# Compiler characteristics
AC_C_CONST
AC_C_BIGENDIAN
# If the compiler is gcc, tune warnings and make the char type unsigned
# and enable C99 support
if test "x$GCC" = "xyes"; then
CFLAGS="$CFLAGS -Wall -Wunused -Wno-unused-label -funsigned-char";
# Add C99 support
CFLAGS="$CFLAGS -D_GNU_SOURCE -std=c99"
# does this compiler support -Wno-pointer-sign ?
svd_CFLAGS="$CFLAGS"
CFLAGS="-Wno-pointer-sign $CFLAGS"
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return 0;])], [], [CFLAGS="$svd_CFLAGS"])
# does this compiler support -Wno-address ?
svd_CFLAGS="$CFLAGS"
CFLAGS="-Wno-address $CFLAGS"
AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return 0;])], [], [CFLAGS="$svd_CFLAGS"])
fi
# ------------------------------------------------------------------------
# Paths
# ------------------------------------------------------------------------
# Find the right directory to put the root-mode PID file in
AC_MSG_CHECKING([pid file location])
if test -d "/var/run"
then
piddir="/var/run"
elif test -d "/etc"
then
piddir="/etc"
fi
AC_DEFINE_UNQUOTED([PIDDIR], "$piddir",
[Define to the pid storage directory.])
AC_MSG_RESULT([$piddir])
# Test mounted filesystem description file
if test -f "/etc/mtab"
then
AC_DEFINE([HAVE_MTAB], 1, [Define to 1 if you have /etc/mtab])
elif test -f "/etc/mnttab"; then
AC_DEFINE([HAVE_MNTTAB], 1, [Define to 1 if you have /etc/mnttab])
fi
# ------------------------------------------------------------------------
# Architecture/OS detection
# ------------------------------------------------------------------------
# Backward compatibility until we get ride of arch settings
architecture=`uname`
if test "$architecture" = "SunOS"
then
ARCH="SOLARIS"
CFLAGS="$CFLAGS -D _REENTRANT -D_POSIX_PTHREAD_SEMANTICS -D__EXTENSIONS__ -m64"
LDFLAGS="$LDFLAGS -m64"
test_kstat="true"
AC_DEFINE([HAVE_CPU_WAIT], [1], [Define to 1 if CPU wait information is available.])
if test `uname -m` = "i86pc"
then
if test "x$GCC" = "xyes"
then
CFLAGS="$CFLAGS -mtune=opteron"
LDFLAGS="$LDFLAGS -mtune=opteron"
else
CFLAGS="$CFLAGS -xarch=sse2"
LDFLAGS="$LDFLAGS -xarch=sse2"
fi
else
if test "x$GCC" = "xyes"
then
CFLAGS="$CFLAGS -mtune=v9"
LDFLAGS="$LDFLAGS -mtune=v9"
else
CFLAGS="$CFLAGS -xarch=sparc"
LDFLAGS="$LDFLAGS -xarch=sparc"
fi
fi
elif test "$architecture" = "Linux"
then
ARCH="LINUX"
CFLAGS="$CFLAGS -D _REENTRANT"
LDFLAGS="$LDFLAGS -rdynamic"
if test `uname -r | awk -F '.' '{print$1$2}'` -ge "26"
then
AC_DEFINE([HAVE_CPU_WAIT], [1], [Define to 1 if CPU wait information is available.])
fi
elif test "$architecture" = "HP-UX"
then
ARCH="HPUX"
CFLAGS="$CFLAGS -D _REENTRANT"
AC_DEFINE([HAVE_CPU_WAIT], [1], [Define to 1 if CPU wait information is available.])
elif test "$architecture" = "OpenBSD"
then
ARCH="OPENBSD"
CFLAGS="$CFLAGS -D _REENTRANT"
test_kvm="true"
use_pam=0 # No PAM on OpenBSD (supports BSD Auth API instead of PAM)
elif test "$architecture" = "FreeBSD"
then
ARCH="FREEBSD"
CFLAGS="$CFLAGS -D _REENTRANT"
test_kvm="true"
elif test "$architecture" = "GNU/kFreeBSD"
then
ARCH="FREEBSD"
CFLAGS="$CFLAGS -D _REENTRANT"
test_kvm="true"
elif test "$architecture" = "NetBSD"
then
ARCH="NETBSD"
CFLAGS="$CFLAGS -D _REENTRANT"
test_kvm="true"
elif test "$architecture" = "Darwin"
then
ARCH="DARWIN"
CFLAGS="$CFLAGS -DREENTRANT -no-cpp-precomp -DNEED_SOCKLEN_T_DEFINED"
test_kvm="true"
LIBS="$LIBS -framework System -multiply_defined suppress"
elif test "$architecture" = "AIX"
then
ARCH="AIX"
CFLAGS="$CFLAGS -D_THREAD_SAFE -D_REENTRANT"
LIBS="$LIBS -lodm"
# AIX v. 5.2
LIBS="$LIBS -lcfg"
# AIX v. 5.3
LIBS="$LIBS -lperfstat"
AC_DEFINE([HAVE_CPU_WAIT], [1], [Define to 1 if CPU wait information is available.])
else
AC_MSG_WARN([Architecture not supported: ${architecture}])
CFLAGS="$CFLAGS -D _REENTRANT"
ARCH="UNKNOWN"
fi
AC_SUBST(ARCH)
# ------------------------------------------------------------------------
# Resource code
# ------------------------------------------------------------------------
# Test for kvm libs
kvm_libs=""
if test "$test_kvm"; then
AC_CHECK_LIB([kvm],
[kvm_open],
[kvm_libs="-lkvm"])
if test "$kvm_libs"
then
LIBS="$LIBS $kvm_libs"
fi
fi
kstat_libs=""
if test "$test_kstat"; then
AC_CHECK_LIB([kstat],
[kstat_open],
[kstat_libs="-lkstat"])
if test "$kstat_libs"
then
LIBS="$LIBS $kstat_libs"
fi
fi
# ------------------------------------------------------------------------
# Large files code
# ------------------------------------------------------------------------
# Check if we want to have large files support
AC_MSG_CHECKING([for large files support])
AC_ARG_WITH(largefiles,
[ --without-largefiles disable large files support (default: enabled)],
[
dnl Check the withvalue
if test "x$withval" = "xno" ; then
use_largefiles=0
AC_MSG_RESULT([disabled])
fi
if test "x$withval" = "xyes" ; then
use_largefiles=1
AC_MSG_RESULT([enabled])
fi
],
[
if test `uname` = "AIX"
then
use_largefiles=0
AC_MSG_RESULT([disabled])
else
use_largefiles=1
AC_MSG_RESULT([enabled])
fi
]
)
# Settings for largefiles support
if test "$use_largefiles" = 1; then
AC_SYS_LARGEFILE
fi
# ------------------------------------------------------------------------
# PAM Code
# ------------------------------------------------------------------------
AC_MSG_CHECKING([for PAM support])
AC_ARG_WITH(pam,
[ --without-pam disable the use of pam (default: enabled)],
[
dnl Check the withvalue
if test "x$withval" = "xno" ; then
use_pam=0
AC_MSG_RESULT([disabled])
fi
if test "x$withval" = "xyes" ; then
use_pam=1
AC_MSG_RESULT([enabled])
fi
],
[
if test "x$use_pam" = "x" ; then
use_pam=1
AC_MSG_RESULT([enabled])
fi
]
)
if test "$use_pam" = "1"; then
AC_CHECK_LIB([pam], [pam_start], [], [AC_MSG_ERROR([PAM enabled but headers or library not found, install the PAM development support or run configure --without-pam])])
fi
# ------------------------------------------------------------------------
# SSL Code
# ------------------------------------------------------------------------
# Check for ssl includes
checksslincldir() { :
if test -f "$1/openssl/ssl.h"; then
sslincldir="$1"
return 0
fi
return 1
}
# Check for ssl libraries
checkssllibdirdynamic() { :
CRYPTOLIB=`ls -1 $1/libcrypto.so* $1/libcrypto.dylib* 2>/dev/null | wc -l`
SSLLIB=`ls -1 $1/libssl.so* $1/libssl.dylib* 2>/dev/null | wc -l`
if test "(" $CRYPTOLIB -gt 0 -a $SSLLIB -gt 0 ")"
then
ssllibdir="$1"
return 0
fi
return 1
}
checkssllibdirstatic() { :
if test "(" -f "$1/libcrypto.a" ")" -a \
"(" -f "$1/libssl.a" ")" ; then
ssllibdir="$1"
return 0
fi
return 1
}
# Check if we want to have SSL
AC_MSG_CHECKING([for static SSL support])
AC_ARG_WITH(ssl-static,
[ --with-ssl-static=DIR location of SSL installation],
[
dnl Check the specified location only
for dir in "$withval" "$withval/include"; do
checksslincldir "$dir"
done
for dir in "$withval" "$withval/lib"; do
checkssllibdirstatic "$dir" && break 2
done
use_sslstatic=1
LDFLAGS="`echo $LDFLAGS | sed -e 's/-rdynamic/-ldl/g'`"
AC_MSG_RESULT([enabled])
AC_DEFINE([HAVE_OPENSSL], 1, [Define to 1 if you have openssl.])
AC_SUBST(sslincldir)
AC_SUBST(ssllibdir)
CFLAGS="$CFLAGS -I$sslincldir"
LIBS="$LIBS $ssllibdir/libssl.a $ssllibdir/libcrypto.a"
],
[
use_sslstatic=0
AC_MSG_RESULT([disabled])
]
)
if test "$use_sslstatic" = "0"
then
AC_MSG_CHECKING([for SSL support])
AC_ARG_WITH(ssl,
[ --without-ssl disable the use of ssl (default: enabled)],
[
dnl Check the withvalue
if test "x$withval" = "xno" ; then
use_ssl=0
AC_MSG_RESULT([disabled])
fi
if test "x$withval" = "xyes" ; then
use_ssl=1
AC_MSG_RESULT([enabled])
fi
],
[
use_ssl=1
AC_MSG_RESULT([enabled])
]
)
# Check for SSL directory
if test "$use_ssl" = "1"; then
AC_ARG_WITH(ssl-dir,
[ --with-ssl-dir=DIR location of SSL installation],
[
dnl Check the specified location only
for dir in "$withval" "$withval/include"; do
checksslincldir "$dir"
done
for dir in "$withval" "$withval/lib"; do
checkssllibdirdynamic "$dir" && break 2
done
]
)
AC_MSG_CHECKING([for SSL include directory])
AC_ARG_WITH(ssl-incl-dir,
[ --with-ssl-incl-dir=DIR location of installed SSL include files],
[
dnl Check the specified location only
checksslincldir "$withval"
],
[
if test -z "$sslincldir"; then
dnl Search default locations of SSL includes
for maindir in /usr /usr/local /usr/lib /usr/pkg /var /opt /usr/sfw /opt/csw /opt/freeware; do
for dir in "$maindir/include"\
"$maindir/include/openssl"\
"$maindir/include/ssl"\
"$maindir/ssl/include"; do
checksslincldir $dir && break 2
done
done
fi
]
)
if test -z "$sslincldir"; then
AC_MSG_RESULT([Not found])
echo
echo "Couldn't find your SSL header files."
echo "Use --with-ssl-incl-dir option to fix this problem or disable"
echo "the SSL support with --without-ssl"
echo
exit 1
fi
AC_MSG_RESULT([$sslincldir])
AC_MSG_CHECKING([for SSL library directory])
AC_ARG_WITH(ssl-lib-dir,
[ --with-ssl-lib-dir=DIR location of installed SSL library files],
[
dnl Check the specified location only
checkssllibdirdynamic "$withval"
],
[
if test -z "$ssllibdir"; then
dnl Search default locations of SSL libraries
for maindir in "" \
/usr \
/usr/local \
/usr/pkg \
/var \
/opt \
/usr/sfw \
/opt/csw \
/opt/freeware; do
for dir in $maindir \
$maindir/openssl \
$maindir/ssl \
$maindir/lib \
$maindir/lib/openssl \
$maindir/lib/ssl \
$maindir/ssl/lib \
$maindir/lib/64 \
$maindir/lib/64/openssl \
$maindir/lib/64/ssl \
$maindir/ssl/lib/64 \
$maindir/lib64 \
$maindir/lib64/openssl \
$maindir/lib64/ssl \
$maindir/ssl/lib64 \
$maindir/lib/${build} \
$maindir/lib/${build_alias}; do
checkssllibdirdynamic $dir && break 2
done
done
fi
]
)
if test -z "$ssllibdir"; then
AC_MSG_RESULT([Not found])
echo
echo "Couldn't find your SSL library files."
echo "Use --with-ssl-lib-dir option to fix this problem or disable the"
echo "SSL support with --without-ssl"
echo
exit 1
fi
AC_MSG_RESULT([$ssllibdir])
AC_DEFINE([HAVE_OPENSSL], 1, [Define to 1 if you have openssl.])
AC_SUBST(sslincldir)
AC_SUBST(ssllibdir)
fi
# Add SSL includes and libraries
if test "$sslincldir" -a "$ssllibdir"
then
if test "x$ARCH" = "xDARWIN"; then
# Darwin already knows about ssldirs
LIBS="$LIBS -lssl -lcrypto"
elif test -f "/usr/kerberos/include/krb5.h"; then
# Redhat 9 compilation fix:
CFLAGS="$CFLAGS -I$sslincldir -I/usr/kerberos/include"
LIBS="$LIBS -L$ssllibdir -lssl -lcrypto"
else
CFLAGS="$CFLAGS -I$sslincldir"
LIBS="$LIBS -L$ssllibdir -lssl -lcrypto"
fi
fi
fi
# ------------------------------------------------------------------------
# Outputs
# ------------------------------------------------------------------------
AH_BOTTOM([
/* Mask out GCC __attribute__ extension for non-gcc compilers. */
#ifndef __GNUC__
#define __attribute__(x)
#endif
])
AC_CONFIG_HEADER([src/config.h])
AC_CONFIG_FILES([Makefile])
AC_CONFIG_FILES([contrib/monit.upstart])
AC_CONFIG_FILES([contrib/monit.service])
AC_OUTPUT
echo
echo "Monit Build Information:"
echo
echo " Architecture: ${ARCH}"
if test "$use_sslstatic" = "1" -o "$use_ssl" = "1"; then
echo " SSL include directory: ${sslincldir}"
echo " SSL library directory: ${ssllibdir}"
fi
echo " Compiler flags: ${CFLAGS}"
echo " Linker flags: ${LIBS}"
echo " pid file location: ${piddir}"
echo " Install directory: ${prefix}"
echo
cat <<EOT
+------------------------------------------------------------+
| License: |
| This is Open Source Software and use is subject to the GNU |
| AFFERO GENERAL PUBLIC LICENSE version 3, available in this |
| distribution in the file COPYING. |
| |
| By continuing this installation process, you are bound by |
| the terms of this license agreement. If you do not agree |
| with the terms of this license, you must abort the |
| installation process at this point. |
+------------------------------------------------------------+
| Monit has been configured with the following options: |
| |
EOT
if test "$use_pam" = "1"; then
echo "| PAM support: ENABLED |"
else
echo "| PAM support: DISABLED |"
fi
if test "$use_sslstatic" = "1" -o "$use_ssl" = "1"; then
echo "| SSL support: ENABLED |"
else
echo "| SSL support: DISABLED |"
fi
if test "$use_largefiles" = "1"; then
echo "| Large files support: ENABLED |"
else
echo "| Large files support: DISABLED |"
fi
if test "x1" = "x$OPTIMIZED"; then
echo "| Optimized: ENABLED |"
else
echo "| Optimized: DISABLED |"
fi
echo "+------------------------------------------------------------+"