| # |
| # MIPS 24K |
| # |
| |
| # The 24K CPUs have two performance counters. |
| # |
| # Even/odd counters are distinguished by setting bit 10 in the event |
| # mask. The kernel masks this bit out before writing the control |
| # register. |
| |
| # |
| # Events specific to both counters |
| # |
| event:0x0 counters:0,1 um:zero minimum:500 name:CYCLES : 0-0 Cycles |
| event:0x1 counters:0,1 um:zero minimum:500 name:INSTRUCTIONS : 1-0 Instructions completed |
| event:0xb counters:0,1 um:zero minimum:500 name:DCACHE_MISSES : 11-0 Data cache misses |
| |
| # |
| # Events specific to counter 0 |
| # |
| event:0x2 counters:0 um:zero minimum:500 name:BRANCH_INSNS : 2-0 Branch instructions (whether completed or mispredicted) |
| event:0x3 counters:0 um:zero minimum:500 name:JR_31_INSNS : 3-0 JR $31 (return) instructions executed |
| event:0x4 counters:0 um:zero minimum:500 name:JR_NON_31_INSNS : 4-0 JR $xx (not $31) instructions executed (at same cost as a mispredict) |
| event:0x5 counters:0 um:zero minimum:500 name:ITLB_ACCESSES : 5-0 Instruction micro-TLB accesses |
| event:0x6 counters:0 um:zero minimum:500 name:DTLB_ACCESSES : 6-0 Data micro-TLB accesses |
| event:0x7 counters:0 um:zero minimum:500 name:JTLB_INSN_ACCESSES : 7-0 Joint TLB instruction accesses |
| event:0x8 counters:0 um:zero minimum:500 name:JTLB_DATA_ACCESSES : 8-0 Joint TLB data (non-instruction) accesses |
| event:0x9 counters:0 um:zero minimum:500 name:ICACHE_ACCESSES : 9-0 Instruction cache accesses |
| event:0xa counters:0 um:zero minimum:500 name:DCACHE_ACCESSES : 10-0 Data cache accesses |
| |
| event:0xd counters:0 um:zero minimum:500 name:STORE_MISS_INSNS : 13-0 Cacheable stores that miss in the cache |
| event:0xe counters:0 um:zero minimum:500 name:INTEGER_INSNS : 14-0 Integer instructions completed |
| event:0xf counters:0 um:zero minimum:500 name:LOAD_INSNS : 15-0 Load instructions completed (including FP) |
| event:0x10 counters:0 um:zero minimum:500 name:J_JAL_INSNS : 16-0 J/JAL instructions completed |
| event:0x11 counters:0 um:zero minimum:500 name:NO_OPS_INSNS : 17-0 no-ops completed, ie instructions writing $0 |
| event:0x12 counters:0 um:zero minimum:500 name:ALL_STALLS : 18-0 Stall cycles, including ALU and IFU |
| event:0x13 counters:0 um:zero minimum:500 name:SC_INSNS : 19-0 SC instructions completed |
| event:0x14 counters:0 um:zero minimum:500 name:PREFETCH_INSNS : 20-0 PREFETCH instructions completed |
| event:0x15 counters:0 um:zero minimum:500 name:L2_CACHE_WRITEBACKS : 21-0 L2 cache lines written back to memory |
| event:0x16 counters:0 um:zero minimum:500 name:L2_CACHE_MISSES : 22-0 L2 cache accesses that missed in the cache |
| event:0x17 counters:0 um:zero minimum:500 name:EXCEPTIONS_TAKEN : 23-0 Exceptions taken |
| event:0x18 counters:0 um:zero minimum:500 name:CACHE_FIXUP_CYCLES : 24-0 Cache fixup cycles (specific to the 24K family microarchitecture) |
| event:0x19 counters:0 um:zero minimum:500 name:IFU_STALLS : 25-0 IFU stall cycles |
| event:0x1a counters:0 um:zero minimum:500 name:DSP_INSNS : 26-0 DSP instructions completed |
| |
| event:0x1d counters:0 um:zero minimum:500 name:ISPRAM_EVENTS : 29-0 Implementation specific ISPRAM events |
| event:0x1e counters:0 um:zero minimum:500 name:COREEXTEND_EVENTS : 30-0 Implementation specific CorExtend events |
| |
| event:0x21 counters:0 um:zero minimum:500 name:UNCACHED_LOAD_INSNS : 33-0 Uncached load instructions |
| event:0x23 counters:0 um:zero minimum:500 name:CP2_ARITH_INSNS : 35-0 CP2 arithmetic instructions completed |
| |
| # |
| # Count number of cycles (most often ``stall cycles'', ie time lost), not just number of events. |
| # |
| event:0x25 counters:0 um:zero minimum:500 name:ICACHE_MISS_STALLS : 37-0 Stall cycles due to an instruction cache miss |
| event:0x26 counters:0 um:zero minimum:500 name:SYNC_STALLS : 38-0 SYNC stall cycles |
| event:0x27 counters:0 um:zero minimum:500 name:DCACHE_MISS_CYCLES : 39-0 Cycles a data cache miss is outstanding, but not necessarily stalling the pipeline |
| event:0x28 counters:0 um:zero minimum:500 name:UNCACHED_STALLS : 40-0 Uncached stall cycles |
| event:0x29 counters:0 um:zero minimum:500 name:MDU_STALLS : 41-0 MDU stall cycles |
| event:0x2a counters:0 um:zero minimum:500 name:CP2_STALLS : 42-0 CP2 stall cycles |
| event:0x2b counters:0 um:zero minimum:500 name:ISPRAM_STALLS : 43-0 ISPRAM stall cycles |
| event:0x2c counters:0 um:zero minimum:500 name:CACHE_INSN_STALLS : 44-0 Stall cycless due to CACHE instructions |
| event:0x2d counters:0 um:zero minimum:500 name:LOAD_USE_STALLS : 45-0 Load to use stall cycles |
| event:0x2e counters:0 um:zero minimum:500 name:INTERLOCK_STALLS : 46-0 Stall cycles due to return data from MFC0 and RDHWR instructions |
| |
| event:0x30 counters:0 um:zero minimum:500 name:IFU_FB_FULL_REFETCHES : 48-0 Refetches due to cache misses while both fill buffers already allocated |
| event:0x31 counters:0 um:zero minimum:500 name:EJTAG_INSN_TRIGGERS : 49-0 EJTAG instruction triggerpoints |
| |
| # |
| # |
| # Monitor the state of various FIFO queues in the load/store unit: |
| # FSB (``fill/store buffer'') |
| # LDQ (``load queue'') |
| # WBB (``write-back buffer'') |
| # |
| event:0x32 counters:0 um:zero minimum:500 name:FSB_LESS_25_FULL : 50-0 FSB < 25% full |
| event:0x33 counters:0 um:zero minimum:500 name:FSB_OVER_50_FULL : 51-0 FSB > 50% full |
| event:0x34 counters:0 um:zero minimum:500 name:LDQ_LESS_25_FULL : 52-0 LDQ < 25% full |
| event:0x35 counters:0 um:zero minimum:500 name:LDQ_OVER_50_FULL : 53-0 LDQ > 50% full |
| event:0x36 counters:0 um:zero minimum:500 name:WBB_LESS_25_FULL : 54-0 WBB < 25% full |
| event:0x37 counters:0 um:zero minimum:500 name:WBB_OVER_50_FULL : 55-0 WBB > 50% full |
| |
| # |
| # Events specific to counter 1 |
| # |
| event:0x402 counters:1 um:zero minimum:500 name:MISPREDICTED_BRANCH_INSNS : 2-1 Branch mispredictions |
| event:0x403 counters:1 um:zero minimum:500 name:JR_31_MISPREDICTIONS : 3-1 JR $31 mispredictions |
| event:0x404 counters:1 um:zero minimum:500 name:JR_31_NO_PREDICTIONS : 4-1 JR $31 not predicted (stack mismatch). |
| event:0x405 counters:1 um:zero minimum:500 name:ITLB_MISSES : 5-1 Instruction micro-TLB misses |
| event:0x406 counters:1 um:zero minimum:500 name:DTLB_MISSES : 6-1 Data micro-TLB misses |
| event:0x407 counters:1 um:zero minimum:500 name:JTLB_INSN_MISSES : 7-1 Joint TLB instruction misses |
| event:0x408 counters:1 um:zero minimum:500 name:JTLB_DATA_MISSES : 8-1 Joint TLB data (non-instruction) misses |
| event:0x409 counters:1 um:zero minimum:500 name:ICACHE_MISSES : 9-1 Instruction cache misses |
| event:0x40a counters:1 um:zero minimum:500 name:DCACHE_WRITEBACKS : 10-1 Data cache lines written back to memory |
| event:0x40d counters:1 um:zero minimum:500 name:LOAD_MISS_INSNS : 13-1 Cacheable load instructions that miss in the cache |
| event:0x40e counters:1 um:zero minimum:500 name:FPU_INSNS : 14-1 FPU instructions completed (not including loads/stores) |
| event:0x40f counters:1 um:zero minimum:500 name:STORE_INSNS : 15-1 Stores completed (including FP) |
| event:0x410 counters:1 um:zero minimum:500 name:MIPS16_INSNS : 16-1 MIPS16 instructions completed |
| event:0x411 counters:1 um:zero minimum:500 name:INT_MUL_DIV_INSNS : 17-1 Integer multiply/divide instructions completed |
| event:0x412 counters:1 um:zero minimum:500 name:REPLAYED_INSNS : 18-1 Replayed instructions |
| event:0x413 counters:1 um:zero minimum:500 name:SC_INSNS_FAILED : 19-1 SC instructions completed, but store failed (because the link bit had been cleared) |
| event:0x414 counters:1 um:zero minimum:500 name:CACHE_HIT_PREFETCH_INSNS : 20-1 PREFETCH instructions completed with cache hit |
| event:0x415 counters:1 um:zero minimum:500 name:L2_CACHE_ACCESSES : 21-1 Accesses to the L2 cache |
| event:0x416 counters:1 um:zero minimum:500 name:L2_CACHE_SINGLE_BIT_ERRORS : 22-1 Single bit errors corrected in L2 |
| |
| event:0x419 counters:1 um:zero minimum:500 name:ALU_STALLS : 25-1 ALU stall cycles |
| event:0x41a counters:1 um:zero minimum:500 name:ALU_DSP_SATURATION_INSNS : 26-1 ALU-DSP saturation instructions |
| event:0x41b counters:1 um:zero minimum:500 name:MDU_DSP_SATURATION_INSNS : 27-1 MDU-DSP saturation instructions |
| |
| event:0x41c counters:1 um:zero minimum:500 name:CP2_EVENTS : 28-1 Implementation specific CP2 events |
| event:0x41d counters:1 um:zero minimum:500 name:DSPRAM_EVENTS : 29-1 Implementation specific DSPRAM events |
| |
| event:0x421 counters:1 um:zero minimum:500 name:UNCACHED_STORE_INSNS : 33-1 Uncached store instructions |
| event:0x423 counters:1 um:zero minimum:500 name:CP2_TO_FROM_INSNS : 35-1 CP2 to/from instructions (moves, control, loads, stores) |
| |
| # |
| # Count number of cycles (most often ``stall cycles'', ie time lost), not just number of events. |
| # |
| event:0x425 counters:1 um:zero minimum:500 name:DCACHE_MISS_STALLS : 37-1 Stall cycles due to a data cache miss |
| event:0x426 counters:1 um:zero minimum:500 name:FSB_INDEX_CONFLICT_STALLS : 38-1 FSB (fill/store buffer) index conflict stall cycles |
| event:0x427 counters:1 um:zero minimum:500 name:L2_CACHE_MISS_CYCLES : 39-1 Cycles a L2 miss is outstanding, but not necessarily stalling the pipeline |
| event:0x429 counters:1 um:zero minimum:500 name:FPU_STALLS : 41-1 FPU stall cycles |
| event:0x42a counters:1 um:zero minimum:500 name:COREEXTEND_STALLS : 42-1 CorExtend stall cycles |
| event:0x42b counters:1 um:zero minimum:500 name:DSPRAM_STALLS : 43-1 DSPRAM stall cycles |
| |
| event:0x42d counters:1 um:zero minimum:500 name:ALU_TO_AGEN_STALLS : 45-1 ALU to AGEN stall cycles |
| event:0x42e counters:1 um:zero minimum:500 name:MISPREDICTION_STALLS : 46-1 Branch mispredict stall cycles |
| |
| event:0x430 counters:1 um:zero minimum:500 name:FB_ENTRY_ALLOCATED_CYCLES : 48-1 Cycles while at least one IFU fill buffer is allocated |
| event:0x431 counters:1 um:zero minimum:500 name:EJTAG_DATA_TRIGGERS : 49-1 EJTAG Data triggerpoints |
| |
| # |
| # Monitor the state of various FIFO queues in the load/store unit: |
| # FSB (``fill/store buffer'') |
| # LDQ (``load queue'') |
| # WBB (``write-back buffer'') |
| # Some count events, others count stall cycles. |
| # |
| event:0x432 counters:1 um:zero minimum:500 name:FSB_25_50_FULL : 50-1 FSB 25-50% full |
| event:0x433 counters:1 um:zero minimum:500 name:FSB_FULL_STALLS : 51-1 FSB full pipeline stall cycles |
| event:0x434 counters:1 um:zero minimum:500 name:LDQ_25_50_FULL : 52-1 LDQ 25-50% full |
| event:0x435 counters:1 um:zero minimum:500 name:LDQ_FULL_STALLS : 53-1 LDQ full pipeline stall cycles |
| event:0x436 counters:1 um:zero minimum:500 name:WBB_25_50_FULL : 54-1 WBB 25-50% full |
| event:0x437 counters:1 um:zero minimum:500 name:WBB_FULL_STALLS : 55-1 WBB full pipeline stall cycles |