| # Makefile.in generated by automake 1.10 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = . |
| DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/libparted.pc.in \ |
| $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog \ |
| INSTALL NEWS THANKS TODO build-aux/compile \ |
| build-aux/config.guess build-aux/config.rpath \ |
| build-aux/config.sub build-aux/depcomp build-aux/install-sh \ |
| build-aux/ltmain.sh build-aux/mdate-sh build-aux/missing \ |
| build-aux/texinfo.tex |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \ |
| $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/assert.m4 \ |
| $(top_srcdir)/m4/atexit.m4 $(top_srcdir)/m4/calloc.m4 \ |
| $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \ |
| $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/config-h.m4 \ |
| $(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dos.m4 \ |
| $(top_srcdir)/m4/double-slash-root.m4 \ |
| $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \ |
| $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fpending.m4 \ |
| $(top_srcdir)/m4/free.m4 $(top_srcdir)/m4/getopt.m4 \ |
| $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \ |
| $(top_srcdir)/m4/gnulib-common.m4 \ |
| $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \ |
| $(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/inttypes-pri.m4 \ |
| $(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/lib-ignore.m4 \ |
| $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ |
| $(top_srcdir)/m4/lib-prefix.m4 \ |
| $(top_srcdir)/m4/localcharset.m4 \ |
| $(top_srcdir)/m4/long-options.m4 $(top_srcdir)/m4/longlong.m4 \ |
| $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \ |
| $(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/memcmp.m4 \ |
| $(top_srcdir)/m4/memcpy.m4 $(top_srcdir)/m4/memmove.m4 \ |
| $(top_srcdir)/m4/memset.m4 $(top_srcdir)/m4/nls.m4 \ |
| $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ |
| $(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/regex.m4 \ |
| $(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/rpmatch.m4 \ |
| $(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \ |
| $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdarg.m4 \ |
| $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stdint.m4 \ |
| $(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/strcspn.m4 \ |
| $(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/strndup.m4 \ |
| $(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtod.m4 \ |
| $(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/unistd_h.m4 \ |
| $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utime.m4 \ |
| $(top_srcdir)/m4/utimes-null.m4 $(top_srcdir)/m4/wchar.m4 \ |
| $(top_srcdir)/m4/wctype.m4 $(top_srcdir)/m4/wint_t.m4 \ |
| $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/lib/config.h |
| CONFIG_CLEAN_FILES = libparted.pc |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| am__installdirs = "$(DESTDIR)$(pcdir)" |
| pcDATA_INSTALL = $(INSTALL_DATA) |
| DATA = $(pc_DATA) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| { test ! -d $(distdir) \ |
| || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr $(distdir); }; } |
| DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| ABSOLUTE_INTTYPES_H = @ABSOLUTE_INTTYPES_H@ |
| ABSOLUTE_STDINT_H = @ABSOLUTE_STDINT_H@ |
| ABSOLUTE_STDLIB_H = @ABSOLUTE_STDLIB_H@ |
| ABSOLUTE_STRING_H = @ABSOLUTE_STRING_H@ |
| ABSOLUTE_UNISTD_H = @ABSOLUTE_UNISTD_H@ |
| ABSOLUTE_WCHAR_H = @ABSOLUTE_WCHAR_H@ |
| ABSOLUTE_WCTYPE_H = @ABSOLUTE_WCTYPE_H@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| ALLOCA_H = @ALLOCA_H@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@ |
| BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@ |
| BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@ |
| BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@ |
| BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@ |
| BUILDINFO = @BUILDINFO@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CHECK_CFLAGS = @CHECK_CFLAGS@ |
| CHECK_LIBS = @CHECK_LIBS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DL_LIBS = @DL_LIBS@ |
| DM_LIBS = @DM_LIBS@ |
| ECHO = @ECHO@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| GETOPT_H = @GETOPT_H@ |
| GLIBC21 = @GLIBC21@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GNULIB_CHOWN = @GNULIB_CHOWN@ |
| GNULIB_DUP2 = @GNULIB_DUP2@ |
| GNULIB_FCHDIR = @GNULIB_FCHDIR@ |
| GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@ |
| GNULIB_GETCWD = @GNULIB_GETCWD@ |
| GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@ |
| GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@ |
| GNULIB_IMAXABS = @GNULIB_IMAXABS@ |
| GNULIB_IMAXDIV = @GNULIB_IMAXDIV@ |
| GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@ |
| GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@ |
| GNULIB_MBSCHR = @GNULIB_MBSCHR@ |
| GNULIB_MBSCSPN = @GNULIB_MBSCSPN@ |
| GNULIB_MBSLEN = @GNULIB_MBSLEN@ |
| GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@ |
| GNULIB_MBSPBRK = @GNULIB_MBSPBRK@ |
| GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@ |
| GNULIB_MBSRCHR = @GNULIB_MBSRCHR@ |
| GNULIB_MBSSEP = @GNULIB_MBSSEP@ |
| GNULIB_MBSSPN = @GNULIB_MBSSPN@ |
| GNULIB_MBSSTR = @GNULIB_MBSSTR@ |
| GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@ |
| GNULIB_MEMMEM = @GNULIB_MEMMEM@ |
| GNULIB_MEMPCPY = @GNULIB_MEMPCPY@ |
| GNULIB_MEMRCHR = @GNULIB_MEMRCHR@ |
| GNULIB_MKDTEMP = @GNULIB_MKDTEMP@ |
| GNULIB_MKSTEMP = @GNULIB_MKSTEMP@ |
| GNULIB_READLINK = @GNULIB_READLINK@ |
| GNULIB_SLEEP = @GNULIB_SLEEP@ |
| GNULIB_STPCPY = @GNULIB_STPCPY@ |
| GNULIB_STPNCPY = @GNULIB_STPNCPY@ |
| GNULIB_STRCASESTR = @GNULIB_STRCASESTR@ |
| GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@ |
| GNULIB_STRDUP = @GNULIB_STRDUP@ |
| GNULIB_STRNDUP = @GNULIB_STRNDUP@ |
| GNULIB_STRNLEN = @GNULIB_STRNLEN@ |
| GNULIB_STRPBRK = @GNULIB_STRPBRK@ |
| GNULIB_STRSEP = @GNULIB_STRSEP@ |
| GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@ |
| GNULIB_STRTOK_R = @GNULIB_STRTOK_R@ |
| GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@ |
| GREP = @GREP@ |
| HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@ |
| HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@ |
| HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@ |
| HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@ |
| HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@ |
| HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@ |
| HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@ |
| HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@ |
| HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@ |
| HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@ |
| HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@ |
| HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@ |
| HAVE_DUP2 = @HAVE_DUP2@ |
| HAVE_FTRUNCATE = @HAVE_FTRUNCATE@ |
| HAVE_GETSUBOPT = @HAVE_GETSUBOPT@ |
| HAVE_INTTYPES_H = @HAVE_INTTYPES_H@ |
| HAVE_ISWCNTRL = @HAVE_ISWCNTRL@ |
| HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@ |
| HAVE_MEMPCPY = @HAVE_MEMPCPY@ |
| HAVE_MKDTEMP = @HAVE_MKDTEMP@ |
| HAVE_READLINK = @HAVE_READLINK@ |
| HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@ |
| HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@ |
| HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@ |
| HAVE_SLEEP = @HAVE_SLEEP@ |
| HAVE_STDINT_H = @HAVE_STDINT_H@ |
| HAVE_STPCPY = @HAVE_STPCPY@ |
| HAVE_STPNCPY = @HAVE_STPNCPY@ |
| HAVE_STRCASECMP = @HAVE_STRCASECMP@ |
| HAVE_STRCASESTR = @HAVE_STRCASESTR@ |
| HAVE_STRCHRNUL = @HAVE_STRCHRNUL@ |
| HAVE_STRNDUP = @HAVE_STRNDUP@ |
| HAVE_STRPBRK = @HAVE_STRPBRK@ |
| HAVE_STRSEP = @HAVE_STRSEP@ |
| HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@ |
| HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@ |
| HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@ |
| HAVE_UNISTD_H = @HAVE_UNISTD_H@ |
| HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@ |
| HAVE_WCTYPE_H = @HAVE_WCTYPE_H@ |
| HAVE_WINT_T = @HAVE_WINT_T@ |
| HAVE__BOOL = @HAVE__BOOL@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLINCS = @INTLINCS@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| INTTYPES_H = @INTTYPES_H@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| LTALLOCA = @LTALLOCA@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LT_AGE = @LT_AGE@ |
| LT_CURRENT = @LT_CURRENT@ |
| LT_RELEASE = @LT_RELEASE@ |
| LT_REVISION = @LT_REVISION@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| OBJEXT = @OBJEXT@ |
| OS = @OS@ |
| OS_LIBS = @OS_LIBS@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PARTEDLDFLAGS = @PARTEDLDFLAGS@ |
| PARTED_LIBS = @PARTED_LIBS@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| POSUB = @POSUB@ |
| POW_LIB = @POW_LIB@ |
| PRIPTR_PREFIX = @PRIPTR_PREFIX@ |
| PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ |
| PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@ |
| RANLIB = @RANLIB@ |
| REISER_LIBS = @REISER_LIBS@ |
| REPLACE_CHOWN = @REPLACE_CHOWN@ |
| REPLACE_FCHDIR = @REPLACE_FCHDIR@ |
| REPLACE_GETCWD = @REPLACE_GETCWD@ |
| REPLACE_MKSTEMP = @REPLACE_MKSTEMP@ |
| SED = @SED@ |
| SELINUX_LIBS = @SELINUX_LIBS@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@ |
| SIZE_T_SUFFIX = @SIZE_T_SUFFIX@ |
| STDBOOL_H = @STDBOOL_H@ |
| STDINT_H = @STDINT_H@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| UUID_LIBS = @UUID_LIBS@ |
| VERSION = @VERSION@ |
| WCHAR_H = @WCHAR_H@ |
| WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@ |
| WCTYPE_H = @WCTYPE_H@ |
| WINT_T_SUFFIX = @WINT_T_SUFFIX@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| gl_LIBOBJS = @gl_LIBOBJS@ |
| gl_LTLIBOBJS = @gl_LTLIBOBJS@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| ACLOCAL_AMFLAGS = -I m4 |
| SUBDIRS = po lib libparted parted partprobe include doc debug tests |
| EXTRA_DIST = \ |
| .prev-version \ |
| BUGS \ |
| libparted.pc.in \ |
| parted.spec.in \ |
| parted.spec \ |
| scripts/data/abi/baseline_symbols.txt \ |
| scripts/extract_symvers \ |
| Makefile.cfg \ |
| Makefile.maint \ |
| GNUmakefile |
| |
| aclocaldir = $(datadir)/aclocal |
| pcdir = $(libdir)/pkgconfig |
| pc_DATA = libparted.pc |
| MAINTAINERCLEANFILES = parted.spec ABOUT-NLS ChangeLog INSTALL \ |
| aclocal.m4 configure |
| |
| ### ABI Checking scripts ### |
| baseline_file = ${top_srcdir}/scripts/data/abi/baseline_symbols.txt |
| extract_symvers = $(top_srcdir)/scripts/extract_symvers |
| MOSTLYCLEANDIRS = m4 |
| all: all-recursive |
| |
| .SUFFIXES: |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ |
| cd $(srcdir) && $(AUTOMAKE) --gnu \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| libparted.pc: $(top_builddir)/config.status $(srcdir)/libparted.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| install-pcDATA: $(pc_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(pcdir)" || $(MKDIR_P) "$(DESTDIR)$(pcdir)" |
| @list='$(pc_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(pcDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pcdir)/$$f'"; \ |
| $(pcDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pcdir)/$$f"; \ |
| done |
| |
| uninstall-pcDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pc_DATA)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pcdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pcdir)/$$f"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d $(distdir) || mkdir $(distdir) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(distdir) |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ |
| && cd $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @cd $(distuninstallcheck_dir) \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(pcdir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-pcDATA |
| |
| install-dvi: install-dvi-recursive |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-ps: install-ps-recursive |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-pcDATA |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ |
| install-strip |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am am--refresh check check-am clean clean-generic \ |
| clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ |
| dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \ |
| distclean-generic distclean-libtool distclean-tags \ |
| distcleancheck distdir distuninstallcheck dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pcDATA install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installdirs installdirs-am \ |
| maintainer-clean maintainer-clean-generic mostlyclean \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-recursive uninstall uninstall-am uninstall-pcDATA |
| |
| |
| # This is best not done via configure.ac, because automake's |
| # make distcheck target does not like auto-generated files |
| # being included in the distributed archive. |
| parted.spec: parted.spec.in |
| sed 's/@''PACKAGE@/$(PACKAGE)/;s/@''VERSION@/$(VERSION)/' $< > $@-tmp |
| mv $@-tmp $@ |
| |
| distcheck-hook: |
| $(MAKE) my-distcheck |
| |
| current_symbols.txt: ${extract_symvers} |
| -@(sh ${extract_symvers} libparted/.libs/libparted.so current_symbols.txt) |
| |
| baseline_symbols: |
| -@(output=${baseline_file}; \ |
| if test ! -f $${output}; then \ |
| echo "Baseline file doesn't exist."; \ |
| echo "Try 'make new-abi-baseline' to create it."; \ |
| exit 1; \ |
| fi; true) |
| |
| new-abi-baseline: |
| -@$(mkinstalldirs) ${baseline_dir} |
| -@(output=${baseline_file}; \ |
| if test -f $${output}; then \ |
| output=$${output}.new; \ |
| t=`echo $${output} | sed 's=.*config/abi/=='`; \ |
| echo "Baseline file already exists, writing to $${t} instead."; \ |
| fi; \ |
| sh ${extract_symvers} libparted/.libs/libparted.so $${output}) |
| |
| # Use 'new-abi-baseline' to create an initial symbol file. Then run |
| # 'check-abi' to test for changes against that file. |
| check-abi: baseline_symbols current_symbols.txt |
| @diff -u ${baseline_file} ./current_symbols.txt 2>&1 \ |
| | tee libparted.abi-diff |
| @test `wc -l < libparted.abi-diff` -gt 0 \ |
| && (echo "ABI has changed. Please, update you ABI package version."; exit 1) \ |
| || exit 0 |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |