| # Makefile.in generated by automake 1.10 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| subdir = doc |
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
| $(srcdir)/stamp-vti $(srcdir)/version.texi |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \ |
| $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/assert.m4 \ |
| $(top_srcdir)/m4/atexit.m4 $(top_srcdir)/m4/calloc.m4 \ |
| $(top_srcdir)/m4/close-stream.m4 $(top_srcdir)/m4/closeout.m4 \ |
| $(top_srcdir)/m4/codeset.m4 $(top_srcdir)/m4/config-h.m4 \ |
| $(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dos.m4 \ |
| $(top_srcdir)/m4/double-slash-root.m4 \ |
| $(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \ |
| $(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/fpending.m4 \ |
| $(top_srcdir)/m4/free.m4 $(top_srcdir)/m4/getopt.m4 \ |
| $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \ |
| $(top_srcdir)/m4/gnulib-common.m4 \ |
| $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/iconv.m4 \ |
| $(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/inttypes-pri.m4 \ |
| $(top_srcdir)/m4/inttypes.m4 $(top_srcdir)/m4/lib-ignore.m4 \ |
| $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \ |
| $(top_srcdir)/m4/lib-prefix.m4 \ |
| $(top_srcdir)/m4/localcharset.m4 \ |
| $(top_srcdir)/m4/long-options.m4 $(top_srcdir)/m4/longlong.m4 \ |
| $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \ |
| $(top_srcdir)/m4/memchr.m4 $(top_srcdir)/m4/memcmp.m4 \ |
| $(top_srcdir)/m4/memcpy.m4 $(top_srcdir)/m4/memmove.m4 \ |
| $(top_srcdir)/m4/memset.m4 $(top_srcdir)/m4/nls.m4 \ |
| $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ |
| $(top_srcdir)/m4/quotearg.m4 $(top_srcdir)/m4/regex.m4 \ |
| $(top_srcdir)/m4/rename.m4 $(top_srcdir)/m4/rpmatch.m4 \ |
| $(top_srcdir)/m4/safe-read.m4 $(top_srcdir)/m4/safe-write.m4 \ |
| $(top_srcdir)/m4/ssize_t.m4 $(top_srcdir)/m4/stdarg.m4 \ |
| $(top_srcdir)/m4/stdbool.m4 $(top_srcdir)/m4/stdint.m4 \ |
| $(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/strcspn.m4 \ |
| $(top_srcdir)/m4/string_h.m4 $(top_srcdir)/m4/strndup.m4 \ |
| $(top_srcdir)/m4/strnlen.m4 $(top_srcdir)/m4/strtod.m4 \ |
| $(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/unistd_h.m4 \ |
| $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/m4/utime.m4 \ |
| $(top_srcdir)/m4/utimes-null.m4 $(top_srcdir)/m4/wchar.m4 \ |
| $(top_srcdir)/m4/wctype.m4 $(top_srcdir)/m4/wint_t.m4 \ |
| $(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = $(top_builddir)/lib/config.h |
| CONFIG_CLEAN_FILES = |
| SOURCES = |
| DIST_SOURCES = |
| INFO_DEPS = $(srcdir)/parted.info |
| TEXINFO_TEX = $(top_srcdir)/build-aux/texinfo.tex |
| am__TEXINFO_TEX_DIR = $(top_srcdir)/build-aux |
| DVIS = parted.dvi |
| PDFS = parted.pdf |
| PSS = parted.ps |
| HTMLS = parted.html |
| TEXINFOS = parted.texi |
| TEXI2DVI = texi2dvi |
| TEXI2PDF = $(TEXI2DVI) --pdf --batch |
| MAKEINFOHTML = $(MAKEINFO) --html |
| AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) |
| DVIPS = dvips |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| am__installdirs = "$(DESTDIR)$(infodir)" |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| ABSOLUTE_INTTYPES_H = @ABSOLUTE_INTTYPES_H@ |
| ABSOLUTE_STDINT_H = @ABSOLUTE_STDINT_H@ |
| ABSOLUTE_STDLIB_H = @ABSOLUTE_STDLIB_H@ |
| ABSOLUTE_STRING_H = @ABSOLUTE_STRING_H@ |
| ABSOLUTE_UNISTD_H = @ABSOLUTE_UNISTD_H@ |
| ABSOLUTE_WCHAR_H = @ABSOLUTE_WCHAR_H@ |
| ABSOLUTE_WCTYPE_H = @ABSOLUTE_WCTYPE_H@ |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| ALLOCA_H = @ALLOCA_H@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@ |
| BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@ |
| BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@ |
| BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@ |
| BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@ |
| BUILDINFO = @BUILDINFO@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CHECK_CFLAGS = @CHECK_CFLAGS@ |
| CHECK_LIBS = @CHECK_LIBS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DL_LIBS = @DL_LIBS@ |
| DM_LIBS = @DM_LIBS@ |
| ECHO = @ECHO@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| GETOPT_H = @GETOPT_H@ |
| GLIBC21 = @GLIBC21@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GNULIB_CHOWN = @GNULIB_CHOWN@ |
| GNULIB_DUP2 = @GNULIB_DUP2@ |
| GNULIB_FCHDIR = @GNULIB_FCHDIR@ |
| GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@ |
| GNULIB_GETCWD = @GNULIB_GETCWD@ |
| GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@ |
| GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@ |
| GNULIB_IMAXABS = @GNULIB_IMAXABS@ |
| GNULIB_IMAXDIV = @GNULIB_IMAXDIV@ |
| GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@ |
| GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@ |
| GNULIB_MBSCHR = @GNULIB_MBSCHR@ |
| GNULIB_MBSCSPN = @GNULIB_MBSCSPN@ |
| GNULIB_MBSLEN = @GNULIB_MBSLEN@ |
| GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@ |
| GNULIB_MBSPBRK = @GNULIB_MBSPBRK@ |
| GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@ |
| GNULIB_MBSRCHR = @GNULIB_MBSRCHR@ |
| GNULIB_MBSSEP = @GNULIB_MBSSEP@ |
| GNULIB_MBSSPN = @GNULIB_MBSSPN@ |
| GNULIB_MBSSTR = @GNULIB_MBSSTR@ |
| GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@ |
| GNULIB_MEMMEM = @GNULIB_MEMMEM@ |
| GNULIB_MEMPCPY = @GNULIB_MEMPCPY@ |
| GNULIB_MEMRCHR = @GNULIB_MEMRCHR@ |
| GNULIB_MKDTEMP = @GNULIB_MKDTEMP@ |
| GNULIB_MKSTEMP = @GNULIB_MKSTEMP@ |
| GNULIB_READLINK = @GNULIB_READLINK@ |
| GNULIB_SLEEP = @GNULIB_SLEEP@ |
| GNULIB_STPCPY = @GNULIB_STPCPY@ |
| GNULIB_STPNCPY = @GNULIB_STPNCPY@ |
| GNULIB_STRCASESTR = @GNULIB_STRCASESTR@ |
| GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@ |
| GNULIB_STRDUP = @GNULIB_STRDUP@ |
| GNULIB_STRNDUP = @GNULIB_STRNDUP@ |
| GNULIB_STRNLEN = @GNULIB_STRNLEN@ |
| GNULIB_STRPBRK = @GNULIB_STRPBRK@ |
| GNULIB_STRSEP = @GNULIB_STRSEP@ |
| GNULIB_STRTOIMAX = @GNULIB_STRTOIMAX@ |
| GNULIB_STRTOK_R = @GNULIB_STRTOK_R@ |
| GNULIB_STRTOUMAX = @GNULIB_STRTOUMAX@ |
| GREP = @GREP@ |
| HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@ |
| HAVE_DECL_IMAXABS = @HAVE_DECL_IMAXABS@ |
| HAVE_DECL_IMAXDIV = @HAVE_DECL_IMAXDIV@ |
| HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@ |
| HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@ |
| HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@ |
| HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@ |
| HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@ |
| HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@ |
| HAVE_DECL_STRTOIMAX = @HAVE_DECL_STRTOIMAX@ |
| HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@ |
| HAVE_DECL_STRTOUMAX = @HAVE_DECL_STRTOUMAX@ |
| HAVE_DUP2 = @HAVE_DUP2@ |
| HAVE_FTRUNCATE = @HAVE_FTRUNCATE@ |
| HAVE_GETSUBOPT = @HAVE_GETSUBOPT@ |
| HAVE_INTTYPES_H = @HAVE_INTTYPES_H@ |
| HAVE_ISWCNTRL = @HAVE_ISWCNTRL@ |
| HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@ |
| HAVE_MEMPCPY = @HAVE_MEMPCPY@ |
| HAVE_MKDTEMP = @HAVE_MKDTEMP@ |
| HAVE_READLINK = @HAVE_READLINK@ |
| HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@ |
| HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@ |
| HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@ |
| HAVE_SLEEP = @HAVE_SLEEP@ |
| HAVE_STDINT_H = @HAVE_STDINT_H@ |
| HAVE_STPCPY = @HAVE_STPCPY@ |
| HAVE_STPNCPY = @HAVE_STPNCPY@ |
| HAVE_STRCASECMP = @HAVE_STRCASECMP@ |
| HAVE_STRCASESTR = @HAVE_STRCASESTR@ |
| HAVE_STRCHRNUL = @HAVE_STRCHRNUL@ |
| HAVE_STRNDUP = @HAVE_STRNDUP@ |
| HAVE_STRPBRK = @HAVE_STRPBRK@ |
| HAVE_STRSEP = @HAVE_STRSEP@ |
| HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@ |
| HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@ |
| HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@ |
| HAVE_UNISTD_H = @HAVE_UNISTD_H@ |
| HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@ |
| HAVE_WCTYPE_H = @HAVE_WCTYPE_H@ |
| HAVE_WINT_T = @HAVE_WINT_T@ |
| HAVE__BOOL = @HAVE__BOOL@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLINCS = @INTLINCS@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| INTTYPES_H = @INTTYPES_H@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| LTALLOCA = @LTALLOCA@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LT_AGE = @LT_AGE@ |
| LT_CURRENT = @LT_CURRENT@ |
| LT_RELEASE = @LT_RELEASE@ |
| LT_REVISION = @LT_REVISION@ |
| MAKEINFO = makeinfo --no-split |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| OBJEXT = @OBJEXT@ |
| OS = @OS@ |
| OS_LIBS = @OS_LIBS@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PARTEDLDFLAGS = @PARTEDLDFLAGS@ |
| PARTED_LIBS = @PARTED_LIBS@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| POSUB = @POSUB@ |
| POW_LIB = @POW_LIB@ |
| PRIPTR_PREFIX = @PRIPTR_PREFIX@ |
| PRI_MACROS_BROKEN = @PRI_MACROS_BROKEN@ |
| PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@ |
| RANLIB = @RANLIB@ |
| REISER_LIBS = @REISER_LIBS@ |
| REPLACE_CHOWN = @REPLACE_CHOWN@ |
| REPLACE_FCHDIR = @REPLACE_FCHDIR@ |
| REPLACE_GETCWD = @REPLACE_GETCWD@ |
| REPLACE_MKSTEMP = @REPLACE_MKSTEMP@ |
| SED = @SED@ |
| SELINUX_LIBS = @SELINUX_LIBS@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@ |
| SIZE_T_SUFFIX = @SIZE_T_SUFFIX@ |
| STDBOOL_H = @STDBOOL_H@ |
| STDINT_H = @STDINT_H@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| UUID_LIBS = @UUID_LIBS@ |
| VERSION = @VERSION@ |
| WCHAR_H = @WCHAR_H@ |
| WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@ |
| WCTYPE_H = @WCTYPE_H@ |
| WINT_T_SUFFIX = @WINT_T_SUFFIX@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| gl_LIBOBJS = @gl_LIBOBJS@ |
| gl_LTLIBOBJS = @gl_LTLIBOBJS@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| |
| # C must be the first sub-directory because it contains the POT files. |
| SUBDIRS = C pt_BR |
| info_TEXINFOS = parted.texi |
| EXTRA_DIST = FAT \ |
| USER.jp \ |
| API \ |
| fdl.texi \ |
| parted-pt_BR.texi |
| |
| MAINTAINERCLEANFILES = Makefile.in \ |
| mdate-sh \ |
| texinfo.tex |
| |
| all: all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .dvi .html .info .pdf .ps .texi |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --gnu doc/Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| .texi.info: |
| restore=: && backupdir="$(am__leading_dot)am$$$$" && \ |
| am__cwd=`pwd` && cd $(srcdir) && \ |
| rm -rf $$backupdir && mkdir $$backupdir && \ |
| if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ |
| for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ |
| if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ |
| done; \ |
| else :; fi && \ |
| cd "$$am__cwd"; \ |
| if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $@ $<; \ |
| then \ |
| rc=0; \ |
| cd $(srcdir); \ |
| else \ |
| rc=$$?; \ |
| cd $(srcdir) && \ |
| $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ |
| fi; \ |
| rm -rf $$backupdir; exit $$rc |
| |
| .texi.dvi: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2DVI) $< |
| |
| .texi.pdf: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \ |
| $(TEXI2PDF) $< |
| |
| .texi.html: |
| rm -rf $(@:.html=.htp) |
| if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ |
| -o $(@:.html=.htp) $<; \ |
| then \ |
| rm -rf $@; \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ |
| else \ |
| if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ |
| rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ |
| exit 1; \ |
| fi |
| $(srcdir)/parted.info: parted.texi $(srcdir)/version.texi |
| parted.dvi: parted.texi $(srcdir)/version.texi |
| parted.pdf: parted.texi $(srcdir)/version.texi |
| parted.html: parted.texi $(srcdir)/version.texi |
| $(srcdir)/version.texi: $(srcdir)/stamp-vti |
| $(srcdir)/stamp-vti: parted.texi $(top_srcdir)/configure |
| @(dir=.; test -f ./parted.texi || dir=$(srcdir); \ |
| set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/parted.texi`; \ |
| echo "@set UPDATED $$1 $$2 $$3"; \ |
| echo "@set UPDATED-MONTH $$2 $$3"; \ |
| echo "@set EDITION $(VERSION)"; \ |
| echo "@set VERSION $(VERSION)") > vti.tmp |
| @cmp -s vti.tmp $(srcdir)/version.texi \ |
| || (echo "Updating $(srcdir)/version.texi"; \ |
| cp vti.tmp $(srcdir)/version.texi) |
| -@rm -f vti.tmp |
| @cp $(srcdir)/version.texi $@ |
| |
| mostlyclean-vti: |
| -rm -f vti.tmp |
| |
| maintainer-clean-vti: |
| -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi |
| .dvi.ps: |
| TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ |
| $(DVIPS) -o $@ $< |
| |
| uninstall-dvi-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(DVIS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(dvidir)/$$f"; \ |
| done |
| |
| uninstall-html-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(HTMLS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ |
| rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ |
| done |
| |
| uninstall-info-am: |
| @$(PRE_UNINSTALL) |
| @if test -d '$(DESTDIR)$(infodir)' && \ |
| (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ |
| done; \ |
| else :; fi |
| @$(NORMAL_UNINSTALL) |
| @list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ |
| echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ |
| rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ |
| else :; fi); \ |
| done |
| |
| uninstall-pdf-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PDFS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ |
| done |
| |
| uninstall-ps-am: |
| @$(NORMAL_UNINSTALL) |
| @list='$(PSS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(psdir)/$$f"; \ |
| done |
| |
| dist-info: $(INFO_DEPS) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for base in $$list; do \ |
| case $$base in \ |
| $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$base; then d=.; else d=$(srcdir); fi; \ |
| base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ |
| if test -f $$file; then \ |
| relfile=`expr "$$file" : "$$d/\(.*\)"`; \ |
| test -f $(distdir)/$$relfile || \ |
| cp -p $$file $(distdir)/$$relfile; \ |
| else :; fi; \ |
| done; \ |
| done |
| |
| mostlyclean-aminfo: |
| -rm -rf parted.aux parted.cp parted.cps parted.fn parted.fns parted.ky \ |
| parted.kys parted.log parted.pg parted.pgs parted.tmp \ |
| parted.toc parted.tp parted.tps parted.vr parted.vrs \ |
| parted.dvi parted.pdf parted.ps parted.html |
| |
| maintainer-clean-aminfo: |
| @list='$(INFO_DEPS)'; for i in $$list; do \ |
| i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ |
| rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-info |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(INFO_DEPS) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(infodir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: $(DVIS) |
| |
| html: html-recursive |
| |
| html-am: $(HTMLS) |
| |
| info: info-recursive |
| |
| info-am: $(INFO_DEPS) |
| |
| install-data-am: install-info-am |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: $(DVIS) |
| @$(NORMAL_INSTALL) |
| test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" |
| @list='$(DVIS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \ |
| done |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: $(HTMLS) |
| @$(NORMAL_INSTALL) |
| test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" |
| @list='$(HTMLS)'; for p in $$list; do \ |
| if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| if test -d "$$d$$p"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ |
| echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ |
| else \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ |
| fi; \ |
| done |
| install-info: install-info-recursive |
| |
| install-info-am: $(INFO_DEPS) |
| @$(NORMAL_INSTALL) |
| test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| esac; \ |
| if test -f $$file; then d=.; else d=$(srcdir); fi; \ |
| file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ |
| for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ |
| $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ |
| if test -f $$ifile; then \ |
| relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ |
| echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ |
| $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ |
| else : ; fi; \ |
| done; \ |
| done |
| @$(POST_INSTALL) |
| @if (install-info --version && \ |
| install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ |
| list='$(INFO_DEPS)'; \ |
| for file in $$list; do \ |
| relfile=`echo "$$file" | sed 's|^.*/||'`; \ |
| echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ |
| install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ |
| done; \ |
| else : ; fi |
| install-man: |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: $(PDFS) |
| @$(NORMAL_INSTALL) |
| test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" |
| @list='$(PDFS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \ |
| done |
| install-ps: install-ps-recursive |
| |
| install-ps-am: $(PSS) |
| @$(NORMAL_INSTALL) |
| test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" |
| @list='$(PSS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \ |
| $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \ |
| done |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-aminfo \ |
| maintainer-clean-generic maintainer-clean-vti |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \ |
| mostlyclean-libtool mostlyclean-vti |
| |
| pdf: pdf-recursive |
| |
| pdf-am: $(PDFS) |
| |
| ps: ps-recursive |
| |
| ps-am: $(PSS) |
| |
| uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-pdf-am uninstall-ps-am |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ |
| install-strip |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am check check-am clean clean-generic clean-libtool \ |
| ctags ctags-recursive dist-info distclean distclean-generic \ |
| distclean-libtool distclean-tags distdir dvi dvi-am html \ |
| html-am info info-am install install-am install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-html install-html-am install-info \ |
| install-info-am install-man install-pdf install-pdf-am \ |
| install-ps install-ps-am install-strip installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-aminfo maintainer-clean-generic \ |
| maintainer-clean-vti mostlyclean mostlyclean-aminfo \ |
| mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \ |
| pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ |
| uninstall-dvi-am uninstall-html-am uninstall-info-am \ |
| uninstall-pdf-am uninstall-ps-am |
| |
| |
| .PHONY: updatepo |
| updatepo: |
| list='$(SUBDIRS)'; for dir in $$list; do \ |
| $(MAKE) -C "$$dir" updatepo; \ |
| done |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
