blob: 95e3bd9b32af22f99853a29ca11700989fe0c1cd [file] [log] [blame]
Create partitions
Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Changes will remain in memory only, until you decide to write them.
After that, of course, the previous content won't be recoverable.
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
The device presents a logical sector size that is smaller than
the physical sector size. Aligning to a physical sector (or optimal
I/O) size boundary is recommended, or performance may be impacted.
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to
switch off the mode (command 'c') and change display units to
sectors (command 'u').
Command (m for help): DOS Compatibility flag is not set
Command (m for help): Changing display/entry units to sectors
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First sector (7-102399, default 7): Using default value 7
Last sector, +sectors or +size{K,M,G} (7-102399, default 102399):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First sector (20487-102399, default 20487): Using default value 20487
Last sector, +sectors or +size{K,M,G} (20487-102399, default 102399):
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): First sector (40967-102399, default 40967): Using default value 40967
Last sector, +sectors or +size{K,M,G} (40967-102399, default 102399):
Command (m for help): Command action
e extended
p primary partition (1-4)
Selected partition 4
First sector (61447-102399, default 61447): Using default value 61447
Last sector, +sectors or +size{K,M,G} (61447-102399, default 102399): Using default value 102399
Command (m for help): First sector (61454-102399, default 63487): Using default value 63487
Last sector, +sectors or +size{K,M,G} (63487-102399, default 102399):
Command (m for help): First sector (61454-102399, default 75775): Using default value 75775
Last sector, +sectors or +size{K,M,G} (75775-102399, default 102399):
Command (m for help): First sector (61454-102399, default 88063): Using default value 88063
Last sector, +sectors or +size{K,M,G} (88063-102399, default 102399): Using default value 102399
Command (m for help):
Disk /dev/sdb: 52 MB, 52428800 bytes
32 heads, 32 sectors/track, 100 cylinders, total 102400 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes
Alignment offset: 3584 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 7 20486 10240 83 Linux
/dev/sdb2 20487 40966 10240 83 Linux
/dev/sdb3 40967 61446 10240 83 Linux
/dev/sdb4 61447 102399 20476+ 5 Extended
/dev/sdb5 63487 73726 5120 83 Linux
/dev/sdb6 75775 86014 5120 83 Linux
/dev/sdb7 88063 102399 7168+ 83 Linux
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Alignment offsets:
0
0
0
0
0
0
0