blob: 0aac02e7fb0e22e532dca3aca30c6fe7472bef95 [file] [log] [blame]
What: /sys/module/pch_phub/drivers/.../pch_mac
Date: August 2010
KernelVersion: 2.6.35
Contact: masa-korg@dsn.okisemi.com
Description: Write/read GbE MAC address.
What: /sys/module/pch_phub/drivers/.../pch_firmware
Date: August 2010
KernelVersion: 2.6.35
Contact: masa-korg@dsn.okisemi.com
Description: Write/read Option ROM data.
What: /sys/module/ehci_hcd/drivers/.../uframe_periodic_max
Date: July 2011
KernelVersion: 3.1
Contact: Kirill Smelkov <kirr@mns.spb.ru>
Description: Maximum time allowed for periodic transfers per microframe s)
[ USB 2.0 sets maximum allowed time for periodic transfers per
microframe to be 80%, that is 100 microseconds out of 125
microseconds (full microframe).
However there are cases, when 80% max isochronous bandwidth is
too limiting. For example two video streams could require 110
microseconds of isochronous bandwidth per microframe to work
together. ]
Through this setting it is possible to raise the limit so that
the host controller would allow allocating more than 100
microseconds of periodic bandwidth per microframe.
Beware, non-standard modes are usually not thoroughly tested by
hardware designers, and the hardware can malfunction when this
setting differ from default 100.
What: /sys/module/*/{coresize,initsize}
Date: Jan 2012
KernelVersion:»·3.3
Contact: Kay Sievers <kay.sievers@vrfy.org>
Description: Module size in bytes.
What: /sys/module/*/taint
Date: Jan 2012
KernelVersion:»·3.3
Contact: Kay Sievers <kay.sievers@vrfy.org>
Description: Module taint flags:
P - proprietary module
O - out-of-tree module
F - force-loaded module
C - staging driver module
E - unsigned module