| Semtech's SX9500 capacitive proximity button device driver |
| |
| Required properties: |
| - compatible: must be "semtech,sx9500" |
| - reg: i2c address where to find the device |
| - interrupt-parent : should be the phandle for the interrupt controller |
| - interrupts : the sole interrupt generated by the device |
| |
| Refer to interrupt-controller/interrupts.txt for generic |
| interrupt client node bindings. |
| |
| Optional properties: |
| - reset-gpios: Reference to the GPIO connected to the device's active |
| low reset pin. |
| |
| Example: |
| |
| sx9500@28 { |
| compatible = "semtech,sx9500"; |
| reg = <0x28>; |
| interrupt-parent = <&gpio2>; |
| interrupts = <16 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; |
| }; |
