blob: 18d4f407bf0e858fcb5732f510113c06b1388018 [file] [log] [blame]
TI OMAP4 Wake-up Generator
All TI OMAP4/5 (and their derivatives) an interrupt controller that
routes interrupts to the GIC, and also serves as a wakeup source. It
is also referred to as "WUGEN-MPU", hence the name of the binding.
Required properties:
- compatible : should contain at least "ti,omap4-wugen-mpu" or
"ti,omap5-wugen-mpu"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value must be 3.
- interrupt-parent : a phandle to the GIC these interrupts are routed
to.
Notes:
- Because this HW ultimately routes interrupts to the GIC, the
interrupt specifier must be that of the GIC.
- Only SPIs can use the WUGEN as an interrupt parent. SGIs and PPIs
are explicitly forbidden.
Example:
wakeupgen: interrupt-controller@48281000 {
compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48281000 0x1000>;
interrupt-parent = <&gic>;
};