blob: 720ea92cfb2e87bb8fa0d6a9ac5e0c14021c23d2 [file] [log] [blame] [edit]
What: /sys/block/zram<id>/num_reads
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The num_reads file is read-only and specifies the number of
reads (failed or successful) done on this device.
Now accessible via zram<id>/stat node.
What: /sys/block/zram<id>/num_writes
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The num_writes file is read-only and specifies the number of
writes (failed or successful) done on this device.
Now accessible via zram<id>/stat node.
What: /sys/block/zram<id>/invalid_io
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The invalid_io file is read-only and specifies the number of
non-page-size-aligned I/O requests issued to this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/failed_reads
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_reads file is read-only and specifies the number of
failed reads happened on this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/failed_writes
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The failed_writes file is read-only and specifies the number of
failed writes happened on this device.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/notify_free
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The notify_free file is read-only. Depending on device usage
scenario it may account a) the number of pages freed because
of swap slot free notifications or b) the number of pages freed
because of REQ_DISCARD requests sent by bio. The former ones
are sent to a swap block device when a swap slot is freed, which
implies that this disk is being used as a swap disk. The latter
ones are sent by filesystem mounted with discard option,
whenever some data blocks are getting discarded.
Now accessible via zram<id>/io_stat node.
What: /sys/block/zram<id>/zero_pages
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The zero_pages file is read-only and specifies number of zero
filled pages written to this disk. No memory is allocated for
such pages.
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/orig_data_size
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The orig_data_size file is read-only and specifies uncompressed
size of data stored in this disk. This excludes zero-filled
pages (zero_pages) since no memory is allocated for them.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/compr_data_size
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The compr_data_size file is read-only and specifies compressed
size of data stored in this disk. So, compression ratio can be
calculated using orig_data_size and this statistic.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/mem_used_total
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_used_total file is read-only and specifies the amount
of memory, including allocator fragmentation and metadata
overhead, allocated for this disk. So, allocator space
efficiency can be calculated using compr_data_size and this
statistic.
Unit: bytes
Now accessible via zram<id>/mm_stat node.
What: /sys/block/zram<id>/mem_used_max
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_used_max file is read/write and specifies the amount
of maximum memory zram have consumed to store compressed data.
For resetting the value, you should write "0". Otherwise,
you could see -EINVAL.
Unit: bytes
Downgraded to write-only node: so it's possible to set new
value only; its current value is stored in zram<id>/mm_stat
node.
What: /sys/block/zram<id>/mem_limit
Date: August 2015
Contact: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Description:
The mem_limit file is read/write and specifies the maximum
amount of memory ZRAM can use to store the compressed data.
The limit could be changed in run time and "0" means disable
the limit. No limit is the initial state. Unit: bytes
Downgraded to write-only node: so it's possible to set new
value only; its current value is stored in zram<id>/mm_stat
node.