blob: e4a25cedc5cf4a523a53cdffe6c88ebe0f8b3093 [file] [log] [blame]
NVIDIA Tegra MIPI pad calibration controller
Required properties:
- compatible: "nvidia,tegra<chip>-mipi"
- reg: Physical base address and length of the controller's registers.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- mipi-cal
- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
that need to be calibrated for a given device.
User nodes need to contain an nvidia,mipi-calibrate property that has a
phandle to refer to the calibration controller node and a bitmask of the pads
that need to be calibrated.
mipi: mipi@700e3000 {
compatible = "nvidia,tegra114-mipi";
reg = <0x700e3000 0x100>;
clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
clock-names = "mipi-cal";
#nvidia,mipi-calibrate-cells = <1>;
host1x@50000000 {
dsi@54300000 {
nvidia,mipi-calibrate = <&mipi 0x060>;