| if (BF537 || BF534 || BF536) | 
 |  | 
 | source "arch/blackfin/mach-bf537/boards/Kconfig" | 
 |  | 
 | menu "BF537 Specific Configuration" | 
 |  | 
 | comment "Interrupt Priority Assignment" | 
 | menu "Priority" | 
 |  | 
 | config IRQ_PLL_WAKEUP | 
 | 	int "IRQ_PLL_WAKEUP" | 
 | 	default 7 | 
 | config IRQ_DMA_ERROR | 
 | 	int "IRQ_DMA_ERROR Generic" | 
 | 	default 7 | 
 | config IRQ_ERROR | 
 | 	int "IRQ_ERROR: PPI CAN MAC SPORT0 SPORT1 SPI UART0 UART1" | 
 | 	default 11 | 
 | config IRQ_RTC | 
 | 	int "IRQ_RTC" | 
 | 	default 8 | 
 | config IRQ_PPI | 
 | 	int "IRQ_PPI" | 
 | 	default 8 | 
 | config IRQ_SPORT0_RX | 
 | 	int "IRQ_SPORT0_RX" | 
 | 	default 9 | 
 | config IRQ_SPORT0_TX | 
 | 	int "IRQ_SPORT0_TX" | 
 | 	default 9 | 
 | config IRQ_SPORT1_RX | 
 | 	int "IRQ_SPORT1_RX" | 
 | 	default 9 | 
 | config IRQ_SPORT1_TX | 
 | 	int "IRQ_SPORT1_TX" | 
 | 	default 9 | 
 | config IRQ_TWI | 
 | 	int "IRQ_TWI" | 
 | 	default 10 | 
 | config IRQ_SPI | 
 | 	int "IRQ_SPI" | 
 | 	default 10 | 
 | config IRQ_UART0_RX | 
 | 	int "IRQ_UART0_RX" | 
 | 	default 10 | 
 | config IRQ_UART0_TX | 
 | 	int "IRQ_UART0_TX" | 
 | 	default 10 | 
 | config IRQ_UART1_RX | 
 | 	int "IRQ_UART1_RX" | 
 | 	default 10 | 
 | config IRQ_UART1_TX | 
 | 	int "IRQ_UART1_TX" | 
 | 	default 10 | 
 | config IRQ_CAN_RX | 
 | 	int "IRQ_CAN_RX" | 
 | 	default 11 | 
 | config IRQ_CAN_TX | 
 | 	int "IRQ_CAN_TX" | 
 | 	default 11 | 
 | config IRQ_MAC_RX | 
 | 	int "IRQ_MAC_RX" | 
 | 	default 11 | 
 | config IRQ_MAC_TX | 
 | 	int "IRQ_MAC_TX" | 
 | 	default 11 | 
 | config IRQ_TIMER0 | 
 | 	int "IRQ_TIMER0" | 
 | 	default 7 if TICKSOURCE_GPTMR0 | 
 | 	default 8 | 
 | config IRQ_TIMER1 | 
 | 	int "IRQ_TIMER1" | 
 | 	default 12 | 
 | config IRQ_TIMER2 | 
 | 	int "IRQ_TIMER2" | 
 | 	default 12 | 
 | config IRQ_TIMER3 | 
 | 	int "IRQ_TIMER3" | 
 | 	default 12 | 
 | config IRQ_TIMER4 | 
 | 	int "IRQ_TIMER4" | 
 | 	default 12 | 
 | config IRQ_TIMER5 | 
 | 	int "IRQ_TIMER5" | 
 | 	default 12 | 
 | config IRQ_TIMER6 | 
 | 	int "IRQ_TIMER6" | 
 | 	default 12 | 
 | config IRQ_TIMER7 | 
 | 	int "IRQ_TIMER7" | 
 | 	default 12 | 
 | config IRQ_PROG_INTA | 
 | 	int "IRQ_PROG_INTA" | 
 | 	default 12 | 
 | config IRQ_PORTG_INTB | 
 | 	int "IRQ_PORTG_INTB" | 
 | 	default 12 | 
 | config IRQ_MEM_DMA0 | 
 | 	int "IRQ_MEM_DMA0" | 
 | 	default 13 | 
 | config IRQ_MEM_DMA1 | 
 | 	int "IRQ_MEM_DMA1" | 
 | 	default 13 | 
 | config IRQ_WATCH | 
 | 	int "IRQ_WATCH" | 
 | 	default 13 | 
 |  | 
 | 	help | 
 | 	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved. | 
 | 	  This applies to all the above.  It is not recommended to assign the | 
 | 	  highest priority number 7 to UART or any other device. | 
 |  | 
 | endmenu | 
 |  | 
 | endmenu | 
 |  | 
 | endif |