| /* | 
 |  * mac80211 configuration hooks for cfg80211 | 
 |  * | 
 |  * Copyright 2006-2010	Johannes Berg <johannes@sipsolutions.net> | 
 |  * Copyright 2013-2014  Intel Mobile Communications GmbH | 
 |  * | 
 |  * This file is GPLv2 as found in COPYING. | 
 |  */ | 
 |  | 
 | #include <linux/ieee80211.h> | 
 | #include <linux/nl80211.h> | 
 | #include <linux/rtnetlink.h> | 
 | #include <linux/slab.h> | 
 | #include <net/net_namespace.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <linux/if_ether.h> | 
 | #include <net/cfg80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "cfg.h" | 
 | #include "rate.h" | 
 | #include "mesh.h" | 
 | #include "wme.h" | 
 |  | 
 | static struct wireless_dev *ieee80211_add_iface(struct wiphy *wiphy, | 
 | 						const char *name, | 
 | 						unsigned char name_assign_type, | 
 | 						enum nl80211_iftype type, | 
 | 						u32 *flags, | 
 | 						struct vif_params *params) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct wireless_dev *wdev; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int err; | 
 |  | 
 | 	err = ieee80211_if_add(local, name, name_assign_type, &wdev, type, params); | 
 | 	if (err) | 
 | 		return ERR_PTR(err); | 
 |  | 
 | 	if (type == NL80211_IFTYPE_MONITOR && flags) { | 
 | 		sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 		sdata->u.mntr_flags = *flags; | 
 | 	} | 
 |  | 
 | 	return wdev; | 
 | } | 
 |  | 
 | static int ieee80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) | 
 | { | 
 | 	ieee80211_if_remove(IEEE80211_WDEV_TO_SUB_IF(wdev)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_change_iface(struct wiphy *wiphy, | 
 | 				  struct net_device *dev, | 
 | 				  enum nl80211_iftype type, u32 *flags, | 
 | 				  struct vif_params *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	int ret; | 
 |  | 
 | 	ret = ieee80211_if_change_type(sdata, type); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (type == NL80211_IFTYPE_AP_VLAN && | 
 | 	    params && params->use_4addr == 0) | 
 | 		RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | 
 | 	else if (type == NL80211_IFTYPE_STATION && | 
 | 		 params && params->use_4addr >= 0) | 
 | 		sdata->u.mgd.use_4addr = params->use_4addr; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) { | 
 | 		struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 		if (ieee80211_sdata_running(sdata)) { | 
 | 			u32 mask = MONITOR_FLAG_COOK_FRAMES | | 
 | 				   MONITOR_FLAG_ACTIVE; | 
 |  | 
 | 			/* | 
 | 			 * Prohibit MONITOR_FLAG_COOK_FRAMES and | 
 | 			 * MONITOR_FLAG_ACTIVE to be changed while the | 
 | 			 * interface is up. | 
 | 			 * Else we would need to add a lot of cruft | 
 | 			 * to update everything: | 
 | 			 *	cooked_mntrs, monitor and all fif_* counters | 
 | 			 *	reconfigure hardware | 
 | 			 */ | 
 | 			if ((*flags & mask) != (sdata->u.mntr_flags & mask)) | 
 | 				return -EBUSY; | 
 |  | 
 | 			ieee80211_adjust_monitor_flags(sdata, -1); | 
 | 			sdata->u.mntr_flags = *flags; | 
 | 			ieee80211_adjust_monitor_flags(sdata, 1); | 
 |  | 
 | 			ieee80211_configure_filter(local); | 
 | 		} else { | 
 | 			/* | 
 | 			 * Because the interface is down, ieee80211_do_stop | 
 | 			 * and ieee80211_do_open take care of "everything" | 
 | 			 * mentioned in the comment above. | 
 | 			 */ | 
 | 			sdata->u.mntr_flags = *flags; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_start_p2p_device(struct wiphy *wiphy, | 
 | 				      struct wireless_dev *wdev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sdata->local->chanctx_mtx); | 
 | 	ret = ieee80211_check_combinations(sdata, NULL, 0, 0); | 
 | 	mutex_unlock(&sdata->local->chanctx_mtx); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return ieee80211_do_open(wdev, true); | 
 | } | 
 |  | 
 | static void ieee80211_stop_p2p_device(struct wiphy *wiphy, | 
 | 				      struct wireless_dev *wdev) | 
 | { | 
 | 	ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev)); | 
 | } | 
 |  | 
 | static int ieee80211_set_noack_map(struct wiphy *wiphy, | 
 | 				  struct net_device *dev, | 
 | 				  u16 noack_map) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	sdata->noack_map = noack_map; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, | 
 | 			     u8 key_idx, bool pairwise, const u8 *mac_addr, | 
 | 			     struct key_params *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta = NULL; | 
 | 	const struct ieee80211_cipher_scheme *cs = NULL; | 
 | 	struct ieee80211_key *key; | 
 | 	int err; | 
 |  | 
 | 	if (!ieee80211_sdata_running(sdata)) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	/* reject WEP and TKIP keys if WEP failed to initialize */ | 
 | 	switch (params->cipher) { | 
 | 	case WLAN_CIPHER_SUITE_WEP40: | 
 | 	case WLAN_CIPHER_SUITE_TKIP: | 
 | 	case WLAN_CIPHER_SUITE_WEP104: | 
 | 		if (IS_ERR(local->wep_tx_tfm)) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_CCMP: | 
 | 	case WLAN_CIPHER_SUITE_CCMP_256: | 
 | 	case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 	case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
 | 	case WLAN_CIPHER_SUITE_GCMP: | 
 | 	case WLAN_CIPHER_SUITE_GCMP_256: | 
 | 		break; | 
 | 	default: | 
 | 		cs = ieee80211_cs_get(local, params->cipher, sdata->vif.type); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len, | 
 | 				  params->key, params->seq_len, params->seq, | 
 | 				  cs); | 
 | 	if (IS_ERR(key)) | 
 | 		return PTR_ERR(key); | 
 |  | 
 | 	if (pairwise) | 
 | 		key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	if (mac_addr) { | 
 | 		if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			sta = sta_info_get(sdata, mac_addr); | 
 | 		else | 
 | 			sta = sta_info_get_bss(sdata, mac_addr); | 
 | 		/* | 
 | 		 * The ASSOC test makes sure the driver is ready to | 
 | 		 * receive the key. When wpa_supplicant has roamed | 
 | 		 * using FT, it attempts to set the key before | 
 | 		 * association has completed, this rejects that attempt | 
 | 		 * so it will set the key again after association. | 
 | 		 * | 
 | 		 * TODO: accept the key if we have a station entry and | 
 | 		 *       add it to the device after the station. | 
 | 		 */ | 
 | 		if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
 | 			ieee80211_key_free_unused(key); | 
 | 			err = -ENOENT; | 
 | 			goto out_unlock; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		if (sdata->u.mgd.mfp != IEEE80211_MFP_DISABLED) | 
 | 			key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_AP: | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 		/* Keys without a station are used for TX only */ | 
 | 		if (key->sta && test_sta_flag(key->sta, WLAN_STA_MFP)) | 
 | 			key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		/* no MFP (yet) */ | 
 | 		break; | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 		if (sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) | 
 | 			key->conf.flags |= IEEE80211_KEY_FLAG_RX_MGMT; | 
 | 		break; | 
 | #endif | 
 | 	case NL80211_IFTYPE_WDS: | 
 | 	case NL80211_IFTYPE_MONITOR: | 
 | 	case NL80211_IFTYPE_P2P_DEVICE: | 
 | 	case NL80211_IFTYPE_UNSPECIFIED: | 
 | 	case NUM_NL80211_IFTYPES: | 
 | 	case NL80211_IFTYPE_P2P_CLIENT: | 
 | 	case NL80211_IFTYPE_P2P_GO: | 
 | 	case NL80211_IFTYPE_OCB: | 
 | 		/* shouldn't happen */ | 
 | 		WARN_ON_ONCE(1); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (sta) | 
 | 		sta->cipher_scheme = cs; | 
 |  | 
 | 	err = ieee80211_key_link(key, sdata, sta); | 
 |  | 
 |  out_unlock: | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev, | 
 | 			     u8 key_idx, bool pairwise, const u8 *mac_addr) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct ieee80211_key *key = NULL; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 | 	mutex_lock(&local->key_mtx); | 
 |  | 
 | 	if (mac_addr) { | 
 | 		ret = -ENOENT; | 
 |  | 
 | 		sta = sta_info_get_bss(sdata, mac_addr); | 
 | 		if (!sta) | 
 | 			goto out_unlock; | 
 |  | 
 | 		if (pairwise) | 
 | 			key = key_mtx_dereference(local, sta->ptk[key_idx]); | 
 | 		else | 
 | 			key = key_mtx_dereference(local, sta->gtk[key_idx]); | 
 | 	} else | 
 | 		key = key_mtx_dereference(local, sdata->keys[key_idx]); | 
 |  | 
 | 	if (!key) { | 
 | 		ret = -ENOENT; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	ieee80211_key_free(key, true); | 
 |  | 
 | 	ret = 0; | 
 |  out_unlock: | 
 | 	mutex_unlock(&local->key_mtx); | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev, | 
 | 			     u8 key_idx, bool pairwise, const u8 *mac_addr, | 
 | 			     void *cookie, | 
 | 			     void (*callback)(void *cookie, | 
 | 					      struct key_params *params)) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct sta_info *sta = NULL; | 
 | 	u8 seq[6] = {0}; | 
 | 	struct key_params params; | 
 | 	struct ieee80211_key *key = NULL; | 
 | 	u64 pn64; | 
 | 	u32 iv32; | 
 | 	u16 iv16; | 
 | 	int err = -ENOENT; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	if (mac_addr) { | 
 | 		sta = sta_info_get_bss(sdata, mac_addr); | 
 | 		if (!sta) | 
 | 			goto out; | 
 |  | 
 | 		if (pairwise && key_idx < NUM_DEFAULT_KEYS) | 
 | 			key = rcu_dereference(sta->ptk[key_idx]); | 
 | 		else if (!pairwise && | 
 | 			 key_idx < NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS) | 
 | 			key = rcu_dereference(sta->gtk[key_idx]); | 
 | 	} else | 
 | 		key = rcu_dereference(sdata->keys[key_idx]); | 
 |  | 
 | 	if (!key) | 
 | 		goto out; | 
 |  | 
 | 	memset(¶ms, 0, sizeof(params)); | 
 |  | 
 | 	params.cipher = key->conf.cipher; | 
 |  | 
 | 	switch (key->conf.cipher) { | 
 | 	case WLAN_CIPHER_SUITE_TKIP: | 
 | 		iv32 = key->u.tkip.tx.iv32; | 
 | 		iv16 = key->u.tkip.tx.iv16; | 
 |  | 
 | 		if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | 
 | 			drv_get_tkip_seq(sdata->local, | 
 | 					 key->conf.hw_key_idx, | 
 | 					 &iv32, &iv16); | 
 |  | 
 | 		seq[0] = iv16 & 0xff; | 
 | 		seq[1] = (iv16 >> 8) & 0xff; | 
 | 		seq[2] = iv32 & 0xff; | 
 | 		seq[3] = (iv32 >> 8) & 0xff; | 
 | 		seq[4] = (iv32 >> 16) & 0xff; | 
 | 		seq[5] = (iv32 >> 24) & 0xff; | 
 | 		params.seq = seq; | 
 | 		params.seq_len = 6; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_CCMP: | 
 | 	case WLAN_CIPHER_SUITE_CCMP_256: | 
 | 		pn64 = atomic64_read(&key->u.ccmp.tx_pn); | 
 | 		seq[0] = pn64; | 
 | 		seq[1] = pn64 >> 8; | 
 | 		seq[2] = pn64 >> 16; | 
 | 		seq[3] = pn64 >> 24; | 
 | 		seq[4] = pn64 >> 32; | 
 | 		seq[5] = pn64 >> 40; | 
 | 		params.seq = seq; | 
 | 		params.seq_len = 6; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_AES_CMAC: | 
 | 	case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
 | 		pn64 = atomic64_read(&key->u.aes_cmac.tx_pn); | 
 | 		seq[0] = pn64; | 
 | 		seq[1] = pn64 >> 8; | 
 | 		seq[2] = pn64 >> 16; | 
 | 		seq[3] = pn64 >> 24; | 
 | 		seq[4] = pn64 >> 32; | 
 | 		seq[5] = pn64 >> 40; | 
 | 		params.seq = seq; | 
 | 		params.seq_len = 6; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
 | 	case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
 | 		pn64 = atomic64_read(&key->u.aes_gmac.tx_pn); | 
 | 		seq[0] = pn64; | 
 | 		seq[1] = pn64 >> 8; | 
 | 		seq[2] = pn64 >> 16; | 
 | 		seq[3] = pn64 >> 24; | 
 | 		seq[4] = pn64 >> 32; | 
 | 		seq[5] = pn64 >> 40; | 
 | 		params.seq = seq; | 
 | 		params.seq_len = 6; | 
 | 		break; | 
 | 	case WLAN_CIPHER_SUITE_GCMP: | 
 | 	case WLAN_CIPHER_SUITE_GCMP_256: | 
 | 		pn64 = atomic64_read(&key->u.gcmp.tx_pn); | 
 | 		seq[0] = pn64; | 
 | 		seq[1] = pn64 >> 8; | 
 | 		seq[2] = pn64 >> 16; | 
 | 		seq[3] = pn64 >> 24; | 
 | 		seq[4] = pn64 >> 32; | 
 | 		seq[5] = pn64 >> 40; | 
 | 		params.seq = seq; | 
 | 		params.seq_len = 6; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	params.key = key->conf.key; | 
 | 	params.key_len = key->conf.keylen; | 
 |  | 
 | 	callback(cookie, ¶ms); | 
 | 	err = 0; | 
 |  | 
 |  out: | 
 | 	rcu_read_unlock(); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ieee80211_config_default_key(struct wiphy *wiphy, | 
 | 					struct net_device *dev, | 
 | 					u8 key_idx, bool uni, | 
 | 					bool multi) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	ieee80211_set_default_key(sdata, key_idx, uni, multi); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy, | 
 | 					     struct net_device *dev, | 
 | 					     u8 key_idx) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	ieee80211_set_default_mgmt_key(sdata, key_idx); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void sta_set_rate_info_tx(struct sta_info *sta, | 
 | 			  const struct ieee80211_tx_rate *rate, | 
 | 			  struct rate_info *rinfo) | 
 | { | 
 | 	rinfo->flags = 0; | 
 | 	if (rate->flags & IEEE80211_TX_RC_MCS) { | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_MCS; | 
 | 		rinfo->mcs = rate->idx; | 
 | 	} else if (rate->flags & IEEE80211_TX_RC_VHT_MCS) { | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | 
 | 		rinfo->mcs = ieee80211_rate_get_vht_mcs(rate); | 
 | 		rinfo->nss = ieee80211_rate_get_vht_nss(rate); | 
 | 	} else { | 
 | 		struct ieee80211_supported_band *sband; | 
 | 		int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | 
 | 		u16 brate; | 
 |  | 
 | 		sband = sta->local->hw.wiphy->bands[ | 
 | 				ieee80211_get_sdata_band(sta->sdata)]; | 
 | 		brate = sband->bitrates[rate->idx].bitrate; | 
 | 		rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | 
 | 	} | 
 | 	if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | 
 | 		rinfo->bw = RATE_INFO_BW_40; | 
 | 	else if (rate->flags & IEEE80211_TX_RC_80_MHZ_WIDTH) | 
 | 		rinfo->bw = RATE_INFO_BW_80; | 
 | 	else if (rate->flags & IEEE80211_TX_RC_160_MHZ_WIDTH) | 
 | 		rinfo->bw = RATE_INFO_BW_160; | 
 | 	else | 
 | 		rinfo->bw = RATE_INFO_BW_20; | 
 | 	if (rate->flags & IEEE80211_TX_RC_SHORT_GI) | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | 
 | } | 
 |  | 
 | void sta_set_rate_info_rx(struct sta_info *sta, struct rate_info *rinfo) | 
 | { | 
 | 	rinfo->flags = 0; | 
 |  | 
 | 	if (sta->last_rx_rate_flag & RX_FLAG_HT) { | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_MCS; | 
 | 		rinfo->mcs = sta->last_rx_rate_idx; | 
 | 	} else if (sta->last_rx_rate_flag & RX_FLAG_VHT) { | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_VHT_MCS; | 
 | 		rinfo->nss = sta->last_rx_rate_vht_nss; | 
 | 		rinfo->mcs = sta->last_rx_rate_idx; | 
 | 	} else { | 
 | 		struct ieee80211_supported_band *sband; | 
 | 		int shift = ieee80211_vif_get_shift(&sta->sdata->vif); | 
 | 		u16 brate; | 
 |  | 
 | 		sband = sta->local->hw.wiphy->bands[ | 
 | 				ieee80211_get_sdata_band(sta->sdata)]; | 
 | 		brate = sband->bitrates[sta->last_rx_rate_idx].bitrate; | 
 | 		rinfo->legacy = DIV_ROUND_UP(brate, 1 << shift); | 
 | 	} | 
 |  | 
 | 	if (sta->last_rx_rate_flag & RX_FLAG_SHORT_GI) | 
 | 		rinfo->flags |= RATE_INFO_FLAGS_SHORT_GI; | 
 |  | 
 | 	if (sta->last_rx_rate_flag & RX_FLAG_5MHZ) | 
 | 		rinfo->bw = RATE_INFO_BW_5; | 
 | 	else if (sta->last_rx_rate_flag & RX_FLAG_10MHZ) | 
 | 		rinfo->bw = RATE_INFO_BW_10; | 
 | 	else if (sta->last_rx_rate_flag & RX_FLAG_40MHZ) | 
 | 		rinfo->bw = RATE_INFO_BW_40; | 
 | 	else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_80MHZ) | 
 | 		rinfo->bw = RATE_INFO_BW_80; | 
 | 	else if (sta->last_rx_rate_vht_flag & RX_VHT_FLAG_160MHZ) | 
 | 		rinfo->bw = RATE_INFO_BW_160; | 
 | 	else | 
 | 		rinfo->bw = RATE_INFO_BW_20; | 
 | } | 
 |  | 
 | static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev, | 
 | 				  int idx, u8 *mac, struct station_info *sinfo) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	int ret = -ENOENT; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	sta = sta_info_get_by_idx(sdata, idx); | 
 | 	if (sta) { | 
 | 		ret = 0; | 
 | 		memcpy(mac, sta->sta.addr, ETH_ALEN); | 
 | 		sta_set_sinfo(sta, sinfo); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev, | 
 | 				 int idx, struct survey_info *survey) | 
 | { | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 |  | 
 | 	return drv_get_survey(local, idx, survey); | 
 | } | 
 |  | 
 | static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev, | 
 | 				 const u8 *mac, struct station_info *sinfo) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	int ret = -ENOENT; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	sta = sta_info_get_bss(sdata, mac); | 
 | 	if (sta) { | 
 | 		ret = 0; | 
 | 		sta_set_sinfo(sta, sinfo); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_set_monitor_channel(struct wiphy *wiphy, | 
 | 					 struct cfg80211_chan_def *chandef) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (cfg80211_chandef_identical(&local->monitor_chandef, chandef)) | 
 | 		return 0; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	mutex_lock(&local->iflist_mtx); | 
 | 	if (local->use_chanctx) { | 
 | 		sdata = rcu_dereference_protected( | 
 | 				local->monitor_sdata, | 
 | 				lockdep_is_held(&local->iflist_mtx)); | 
 | 		if (sdata) { | 
 | 			ieee80211_vif_release_channel(sdata); | 
 | 			ret = ieee80211_vif_use_channel(sdata, chandef, | 
 | 					IEEE80211_CHANCTX_EXCLUSIVE); | 
 | 		} | 
 | 	} else if (local->open_count == local->monitors) { | 
 | 		local->_oper_chandef = *chandef; | 
 | 		ieee80211_hw_config(local, 0); | 
 | 	} | 
 |  | 
 | 	if (ret == 0) | 
 | 		local->monitor_chandef = *chandef; | 
 | 	mutex_unlock(&local->iflist_mtx); | 
 | 	mutex_unlock(&local->mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, | 
 | 				    const u8 *resp, size_t resp_len, | 
 | 				    const struct ieee80211_csa_settings *csa) | 
 | { | 
 | 	struct probe_resp *new, *old; | 
 |  | 
 | 	if (!resp || !resp_len) | 
 | 		return 1; | 
 |  | 
 | 	old = sdata_dereference(sdata->u.ap.probe_resp, sdata); | 
 |  | 
 | 	new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL); | 
 | 	if (!new) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	new->len = resp_len; | 
 | 	memcpy(new->data, resp, resp_len); | 
 |  | 
 | 	if (csa) | 
 | 		memcpy(new->csa_counter_offsets, csa->counter_offsets_presp, | 
 | 		       csa->n_counter_offsets_presp * | 
 | 		       sizeof(new->csa_counter_offsets[0])); | 
 |  | 
 | 	rcu_assign_pointer(sdata->u.ap.probe_resp, new); | 
 | 	if (old) | 
 | 		kfree_rcu(old, rcu_head); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, | 
 | 				   struct cfg80211_beacon_data *params, | 
 | 				   const struct ieee80211_csa_settings *csa) | 
 | { | 
 | 	struct beacon_data *new, *old; | 
 | 	int new_head_len, new_tail_len; | 
 | 	int size, err; | 
 | 	u32 changed = BSS_CHANGED_BEACON; | 
 |  | 
 | 	old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
 |  | 
 |  | 
 | 	/* Need to have a beacon head if we don't have one yet */ | 
 | 	if (!params->head && !old) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* new or old head? */ | 
 | 	if (params->head) | 
 | 		new_head_len = params->head_len; | 
 | 	else | 
 | 		new_head_len = old->head_len; | 
 |  | 
 | 	/* new or old tail? */ | 
 | 	if (params->tail || !old) | 
 | 		/* params->tail_len will be zero for !params->tail */ | 
 | 		new_tail_len = params->tail_len; | 
 | 	else | 
 | 		new_tail_len = old->tail_len; | 
 |  | 
 | 	size = sizeof(*new) + new_head_len + new_tail_len; | 
 |  | 
 | 	new = kzalloc(size, GFP_KERNEL); | 
 | 	if (!new) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* start filling the new info now */ | 
 |  | 
 | 	/* | 
 | 	 * pointers go into the block we allocated, | 
 | 	 * memory is | beacon_data | head | tail | | 
 | 	 */ | 
 | 	new->head = ((u8 *) new) + sizeof(*new); | 
 | 	new->tail = new->head + new_head_len; | 
 | 	new->head_len = new_head_len; | 
 | 	new->tail_len = new_tail_len; | 
 |  | 
 | 	if (csa) { | 
 | 		new->csa_current_counter = csa->count; | 
 | 		memcpy(new->csa_counter_offsets, csa->counter_offsets_beacon, | 
 | 		       csa->n_counter_offsets_beacon * | 
 | 		       sizeof(new->csa_counter_offsets[0])); | 
 | 	} | 
 |  | 
 | 	/* copy in head */ | 
 | 	if (params->head) | 
 | 		memcpy(new->head, params->head, new_head_len); | 
 | 	else | 
 | 		memcpy(new->head, old->head, new_head_len); | 
 |  | 
 | 	/* copy in optional tail */ | 
 | 	if (params->tail) | 
 | 		memcpy(new->tail, params->tail, new_tail_len); | 
 | 	else | 
 | 		if (old) | 
 | 			memcpy(new->tail, old->tail, new_tail_len); | 
 |  | 
 | 	err = ieee80211_set_probe_resp(sdata, params->probe_resp, | 
 | 				       params->probe_resp_len, csa); | 
 | 	if (err < 0) | 
 | 		return err; | 
 | 	if (err == 0) | 
 | 		changed |= BSS_CHANGED_AP_PROBE_RESP; | 
 |  | 
 | 	rcu_assign_pointer(sdata->u.ap.beacon, new); | 
 |  | 
 | 	if (old) | 
 | 		kfree_rcu(old, rcu_head); | 
 |  | 
 | 	return changed; | 
 | } | 
 |  | 
 | static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, | 
 | 			      struct cfg80211_ap_settings *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct beacon_data *old; | 
 | 	struct ieee80211_sub_if_data *vlan; | 
 | 	u32 changed = BSS_CHANGED_BEACON_INT | | 
 | 		      BSS_CHANGED_BEACON_ENABLED | | 
 | 		      BSS_CHANGED_BEACON | | 
 | 		      BSS_CHANGED_SSID | | 
 | 		      BSS_CHANGED_P2P_PS | | 
 | 		      BSS_CHANGED_TXPOWER; | 
 | 	int err; | 
 |  | 
 | 	old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
 | 	if (old) | 
 | 		return -EALREADY; | 
 |  | 
 | 	switch (params->smps_mode) { | 
 | 	case NL80211_SMPS_OFF: | 
 | 		sdata->smps_mode = IEEE80211_SMPS_OFF; | 
 | 		break; | 
 | 	case NL80211_SMPS_STATIC: | 
 | 		sdata->smps_mode = IEEE80211_SMPS_STATIC; | 
 | 		break; | 
 | 	case NL80211_SMPS_DYNAMIC: | 
 | 		sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	sdata->needed_rx_chains = sdata->local->rx_chains; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, | 
 | 					IEEE80211_CHANCTX_SHARED); | 
 | 	if (!err) | 
 | 		ieee80211_vif_copy_chanctx_to_vlans(sdata, false); | 
 | 	mutex_unlock(&local->mtx); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* | 
 | 	 * Apply control port protocol, this allows us to | 
 | 	 * not encrypt dynamic WEP control frames. | 
 | 	 */ | 
 | 	sdata->control_port_protocol = params->crypto.control_port_ethertype; | 
 | 	sdata->control_port_no_encrypt = params->crypto.control_port_no_encrypt; | 
 | 	sdata->encrypt_headroom = ieee80211_cs_headroom(sdata->local, | 
 | 							¶ms->crypto, | 
 | 							sdata->vif.type); | 
 |  | 
 | 	list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) { | 
 | 		vlan->control_port_protocol = | 
 | 			params->crypto.control_port_ethertype; | 
 | 		vlan->control_port_no_encrypt = | 
 | 			params->crypto.control_port_no_encrypt; | 
 | 		vlan->encrypt_headroom = | 
 | 			ieee80211_cs_headroom(sdata->local, | 
 | 					      ¶ms->crypto, | 
 | 					      vlan->vif.type); | 
 | 	} | 
 |  | 
 | 	sdata->vif.bss_conf.beacon_int = params->beacon_interval; | 
 | 	sdata->vif.bss_conf.dtim_period = params->dtim_period; | 
 | 	sdata->vif.bss_conf.enable_beacon = true; | 
 |  | 
 | 	sdata->vif.bss_conf.ssid_len = params->ssid_len; | 
 | 	if (params->ssid_len) | 
 | 		memcpy(sdata->vif.bss_conf.ssid, params->ssid, | 
 | 		       params->ssid_len); | 
 | 	sdata->vif.bss_conf.hidden_ssid = | 
 | 		(params->hidden_ssid != NL80211_HIDDEN_SSID_NOT_IN_USE); | 
 |  | 
 | 	memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, | 
 | 	       sizeof(sdata->vif.bss_conf.p2p_noa_attr)); | 
 | 	sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow = | 
 | 		params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
 | 	if (params->p2p_opp_ps) | 
 | 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
 | 					IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
 |  | 
 | 	err = ieee80211_assign_beacon(sdata, ¶ms->beacon, NULL); | 
 | 	if (err < 0) { | 
 | 		ieee80211_vif_release_channel(sdata); | 
 | 		return err; | 
 | 	} | 
 | 	changed |= err; | 
 |  | 
 | 	err = drv_start_ap(sdata->local, sdata); | 
 | 	if (err) { | 
 | 		old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
 |  | 
 | 		if (old) | 
 | 			kfree_rcu(old, rcu_head); | 
 | 		RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | 
 | 		ieee80211_vif_release_channel(sdata); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	ieee80211_recalc_dtim(local, sdata); | 
 | 	ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	netif_carrier_on(dev); | 
 | 	list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | 
 | 		netif_carrier_on(vlan->dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, | 
 | 				   struct cfg80211_beacon_data *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct beacon_data *old; | 
 | 	int err; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	sdata_assert_lock(sdata); | 
 |  | 
 | 	/* don't allow changing the beacon while CSA is in place - offset | 
 | 	 * of channel switch counter may change | 
 | 	 */ | 
 | 	if (sdata->vif.csa_active) | 
 | 		return -EBUSY; | 
 |  | 
 | 	old = sdata_dereference(sdata->u.ap.beacon, sdata); | 
 | 	if (!old) | 
 | 		return -ENOENT; | 
 |  | 
 | 	err = ieee80211_assign_beacon(sdata, params, NULL); | 
 | 	if (err < 0) | 
 | 		return err; | 
 | 	ieee80211_bss_info_change_notify(sdata, err); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_sub_if_data *vlan; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct beacon_data *old_beacon; | 
 | 	struct probe_resp *old_probe_resp; | 
 | 	struct cfg80211_chan_def chandef; | 
 |  | 
 | 	sdata_assert_lock(sdata); | 
 |  | 
 | 	old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata); | 
 | 	if (!old_beacon) | 
 | 		return -ENOENT; | 
 | 	old_probe_resp = sdata_dereference(sdata->u.ap.probe_resp, sdata); | 
 |  | 
 | 	/* abort any running channel switch */ | 
 | 	mutex_lock(&local->mtx); | 
 | 	sdata->vif.csa_active = false; | 
 | 	if (sdata->csa_block_tx) { | 
 | 		ieee80211_wake_vif_queues(local, sdata, | 
 | 					  IEEE80211_QUEUE_STOP_REASON_CSA); | 
 | 		sdata->csa_block_tx = false; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&local->mtx); | 
 |  | 
 | 	kfree(sdata->u.ap.next_beacon); | 
 | 	sdata->u.ap.next_beacon = NULL; | 
 |  | 
 | 	/* turn off carrier for this interface and dependent VLANs */ | 
 | 	list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) | 
 | 		netif_carrier_off(vlan->dev); | 
 | 	netif_carrier_off(dev); | 
 |  | 
 | 	/* remove beacon and probe response */ | 
 | 	RCU_INIT_POINTER(sdata->u.ap.beacon, NULL); | 
 | 	RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL); | 
 | 	kfree_rcu(old_beacon, rcu_head); | 
 | 	if (old_probe_resp) | 
 | 		kfree_rcu(old_probe_resp, rcu_head); | 
 | 	sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; | 
 |  | 
 | 	__sta_info_flush(sdata, true); | 
 | 	ieee80211_free_keys(sdata, true); | 
 |  | 
 | 	sdata->vif.bss_conf.enable_beacon = false; | 
 | 	sdata->vif.bss_conf.ssid_len = 0; | 
 | 	clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); | 
 |  | 
 | 	if (sdata->wdev.cac_started) { | 
 | 		chandef = sdata->vif.bss_conf.chandef; | 
 | 		cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); | 
 | 		cfg80211_cac_event(sdata->dev, &chandef, | 
 | 				   NL80211_RADAR_CAC_ABORTED, | 
 | 				   GFP_KERNEL); | 
 | 	} | 
 |  | 
 | 	drv_stop_ap(sdata->local, sdata); | 
 |  | 
 | 	/* free all potentially still buffered bcast frames */ | 
 | 	local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); | 
 | 	skb_queue_purge(&sdata->u.ap.ps.bc_buf); | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	ieee80211_vif_copy_chanctx_to_vlans(sdata, true); | 
 | 	ieee80211_vif_release_channel(sdata); | 
 | 	mutex_unlock(&local->mtx); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */ | 
 | struct iapp_layer2_update { | 
 | 	u8 da[ETH_ALEN];	/* broadcast */ | 
 | 	u8 sa[ETH_ALEN];	/* STA addr */ | 
 | 	__be16 len;		/* 6 */ | 
 | 	u8 dsap;		/* 0 */ | 
 | 	u8 ssap;		/* 0 */ | 
 | 	u8 control; | 
 | 	u8 xid_info[3]; | 
 | } __packed; | 
 |  | 
 | static void ieee80211_send_layer2_update(struct sta_info *sta) | 
 | { | 
 | 	struct iapp_layer2_update *msg; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* Send Level 2 Update Frame to update forwarding tables in layer 2 | 
 | 	 * bridge devices */ | 
 |  | 
 | 	skb = dev_alloc_skb(sizeof(*msg)); | 
 | 	if (!skb) | 
 | 		return; | 
 | 	msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg)); | 
 |  | 
 | 	/* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) | 
 | 	 * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ | 
 |  | 
 | 	eth_broadcast_addr(msg->da); | 
 | 	memcpy(msg->sa, sta->sta.addr, ETH_ALEN); | 
 | 	msg->len = htons(6); | 
 | 	msg->dsap = 0; | 
 | 	msg->ssap = 0x01;	/* NULL LSAP, CR Bit: Response */ | 
 | 	msg->control = 0xaf;	/* XID response lsb.1111F101. | 
 | 				 * F=0 (no poll command; unsolicited frame) */ | 
 | 	msg->xid_info[0] = 0x81;	/* XID format identifier */ | 
 | 	msg->xid_info[1] = 1;	/* LLC types/classes: Type 1 LLC */ | 
 | 	msg->xid_info[2] = 0;	/* XID sender's receive window size (RW) */ | 
 |  | 
 | 	skb->dev = sta->sdata->dev; | 
 | 	skb->protocol = eth_type_trans(skb, sta->sdata->dev); | 
 | 	memset(skb->cb, 0, sizeof(skb->cb)); | 
 | 	netif_rx_ni(skb); | 
 | } | 
 |  | 
 | static int sta_apply_auth_flags(struct ieee80211_local *local, | 
 | 				struct sta_info *sta, | 
 | 				u32 mask, u32 set) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
 | 	    set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
 | 	    !test_sta_flag(sta, WLAN_STA_AUTH)) { | 
 | 		ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
 | 	    set & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
 | 	    !test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
 | 		/* | 
 | 		 * When peer becomes associated, init rate control as | 
 | 		 * well. Some drivers require rate control initialized | 
 | 		 * before drv_sta_state() is called. | 
 | 		 */ | 
 | 		if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
 | 			rate_control_rate_init(sta); | 
 |  | 
 | 		ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
 | 		if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) | 
 | 			ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); | 
 | 		else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
 | 			ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); | 
 | 		else | 
 | 			ret = 0; | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && | 
 | 	    !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && | 
 | 	    test_sta_flag(sta, WLAN_STA_ASSOC)) { | 
 | 		ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && | 
 | 	    !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && | 
 | 	    test_sta_flag(sta, WLAN_STA_AUTH)) { | 
 | 		ret = sta_info_move_state(sta, IEEE80211_STA_NONE); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta_apply_parameters(struct ieee80211_local *local, | 
 | 				struct sta_info *sta, | 
 | 				struct station_parameters *params) | 
 | { | 
 | 	int ret = 0; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	enum ieee80211_band band = ieee80211_get_sdata_band(sdata); | 
 | 	u32 mask, set; | 
 |  | 
 | 	sband = local->hw.wiphy->bands[band]; | 
 |  | 
 | 	mask = params->sta_flags_mask; | 
 | 	set = params->sta_flags_set; | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | 		/* | 
 | 		 * In mesh mode, ASSOCIATED isn't part of the nl80211 | 
 | 		 * API but must follow AUTHENTICATED for driver state. | 
 | 		 */ | 
 | 		if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | 
 | 			mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); | 
 | 		if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) | 
 | 			set |= BIT(NL80211_STA_FLAG_ASSOCIATED); | 
 | 	} else if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
 | 		/* | 
 | 		 * TDLS -- everything follows authorized, but | 
 | 		 * only becoming authorized is possible, not | 
 | 		 * going back | 
 | 		 */ | 
 | 		if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
 | 			set |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | 
 | 			       BIT(NL80211_STA_FLAG_ASSOCIATED); | 
 | 			mask |= BIT(NL80211_STA_FLAG_AUTHENTICATED) | | 
 | 				BIT(NL80211_STA_FLAG_ASSOCIATED); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_WME) && | 
 | 	    local->hw.queues >= IEEE80211_NUM_ACS) | 
 | 		sta->sta.wme = set & BIT(NL80211_STA_FLAG_WME); | 
 |  | 
 | 	/* auth flags will be set later for TDLS stations */ | 
 | 	if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
 | 		ret = sta_apply_auth_flags(local, sta, mask, set); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { | 
 | 		if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) | 
 | 			set_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | 
 | 		else | 
 | 			clear_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE); | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_MFP)) { | 
 | 		sta->sta.mfp = !!(set & BIT(NL80211_STA_FLAG_MFP)); | 
 | 		if (set & BIT(NL80211_STA_FLAG_MFP)) | 
 | 			set_sta_flag(sta, WLAN_STA_MFP); | 
 | 		else | 
 | 			clear_sta_flag(sta, WLAN_STA_MFP); | 
 | 	} | 
 |  | 
 | 	if (mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) { | 
 | 		if (set & BIT(NL80211_STA_FLAG_TDLS_PEER)) | 
 | 			set_sta_flag(sta, WLAN_STA_TDLS_PEER); | 
 | 		else | 
 | 			clear_sta_flag(sta, WLAN_STA_TDLS_PEER); | 
 | 	} | 
 |  | 
 | 	/* mark TDLS channel switch support, if the AP allows it */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_TDLS_PEER) && | 
 | 	    !sdata->u.mgd.tdls_chan_switch_prohibited && | 
 | 	    params->ext_capab_len >= 4 && | 
 | 	    params->ext_capab[3] & WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH) | 
 | 		set_sta_flag(sta, WLAN_STA_TDLS_CHAN_SWITCH); | 
 |  | 
 | 	if (params->sta_modify_mask & STATION_PARAM_APPLY_UAPSD) { | 
 | 		sta->sta.uapsd_queues = params->uapsd_queues; | 
 | 		sta->sta.max_sp = params->max_sp; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * cfg80211 validates this (1-2007) and allows setting the AID | 
 | 	 * only when creating a new station entry | 
 | 	 */ | 
 | 	if (params->aid) | 
 | 		sta->sta.aid = params->aid; | 
 |  | 
 | 	/* | 
 | 	 * Some of the following updates would be racy if called on an | 
 | 	 * existing station, via ieee80211_change_station(). However, | 
 | 	 * all such changes are rejected by cfg80211 except for updates | 
 | 	 * changing the supported rates on an existing but not yet used | 
 | 	 * TDLS peer. | 
 | 	 */ | 
 |  | 
 | 	if (params->listen_interval >= 0) | 
 | 		sta->listen_interval = params->listen_interval; | 
 |  | 
 | 	if (params->supported_rates) { | 
 | 		ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | 
 | 					 sband, params->supported_rates, | 
 | 					 params->supported_rates_len, | 
 | 					 &sta->sta.supp_rates[band]); | 
 | 	} | 
 |  | 
 | 	if (params->ht_capa) | 
 | 		ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, | 
 | 						  params->ht_capa, sta); | 
 |  | 
 | 	if (params->vht_capa) | 
 | 		ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, | 
 | 						    params->vht_capa, sta); | 
 |  | 
 | 	if (params->opmode_notif_used) { | 
 | 		/* returned value is only needed for rc update, but the | 
 | 		 * rc isn't initialized here yet, so ignore it | 
 | 		 */ | 
 | 		__ieee80211_vht_handle_opmode(sdata, sta, | 
 | 					      params->opmode_notif, | 
 | 					      band, false); | 
 | 	} | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 		u32 changed = 0; | 
 |  | 
 | 		if (params->sta_modify_mask & STATION_PARAM_APPLY_PLINK_STATE) { | 
 | 			switch (params->plink_state) { | 
 | 			case NL80211_PLINK_ESTAB: | 
 | 				if (sta->plink_state != NL80211_PLINK_ESTAB) | 
 | 					changed = mesh_plink_inc_estab_count( | 
 | 							sdata); | 
 | 				sta->plink_state = params->plink_state; | 
 |  | 
 | 				ieee80211_mps_sta_status_update(sta); | 
 | 				changed |= ieee80211_mps_set_sta_local_pm(sta, | 
 | 					      sdata->u.mesh.mshcfg.power_mode); | 
 | 				break; | 
 | 			case NL80211_PLINK_LISTEN: | 
 | 			case NL80211_PLINK_BLOCKED: | 
 | 			case NL80211_PLINK_OPN_SNT: | 
 | 			case NL80211_PLINK_OPN_RCVD: | 
 | 			case NL80211_PLINK_CNF_RCVD: | 
 | 			case NL80211_PLINK_HOLDING: | 
 | 				if (sta->plink_state == NL80211_PLINK_ESTAB) | 
 | 					changed = mesh_plink_dec_estab_count( | 
 | 							sdata); | 
 | 				sta->plink_state = params->plink_state; | 
 |  | 
 | 				ieee80211_mps_sta_status_update(sta); | 
 | 				changed |= ieee80211_mps_set_sta_local_pm(sta, | 
 | 						NL80211_MESH_POWER_UNKNOWN); | 
 | 				break; | 
 | 			default: | 
 | 				/*  nothing  */ | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		switch (params->plink_action) { | 
 | 		case NL80211_PLINK_ACTION_NO_ACTION: | 
 | 			/* nothing */ | 
 | 			break; | 
 | 		case NL80211_PLINK_ACTION_OPEN: | 
 | 			changed |= mesh_plink_open(sta); | 
 | 			break; | 
 | 		case NL80211_PLINK_ACTION_BLOCK: | 
 | 			changed |= mesh_plink_block(sta); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (params->local_pm) | 
 | 			changed |= | 
 | 			      ieee80211_mps_set_sta_local_pm(sta, | 
 | 							     params->local_pm); | 
 | 		ieee80211_mbss_info_change_notify(sdata, changed); | 
 | #endif | 
 | 	} | 
 |  | 
 | 	/* set the STA state after all sta info from usermode has been set */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
 | 		ret = sta_apply_auth_flags(local, sta, mask, set); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, | 
 | 				 const u8 *mac, | 
 | 				 struct station_parameters *params) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct sta_info *sta; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int err; | 
 | 	int layer2_update; | 
 |  | 
 | 	if (params->vlan) { | 
 | 		sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | 
 |  | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN && | 
 | 		    sdata->vif.type != NL80211_IFTYPE_AP) | 
 | 			return -EINVAL; | 
 | 	} else | 
 | 		sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (ether_addr_equal(mac, sdata->vif.addr)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (is_multicast_ether_addr(mac)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	sta = sta_info_alloc(sdata, mac, GFP_KERNEL); | 
 | 	if (!sta) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * defaults -- if userspace wants something else we'll | 
 | 	 * change it accordingly in sta_apply_parameters() | 
 | 	 */ | 
 | 	if (!(params->sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) { | 
 | 		sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); | 
 | 		sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); | 
 | 	} else { | 
 | 		sta->sta.tdls = true; | 
 | 	} | 
 |  | 
 | 	err = sta_apply_parameters(local, sta, params); | 
 | 	if (err) { | 
 | 		sta_info_free(local, sta); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * for TDLS, rate control should be initialized only when | 
 | 	 * rates are known and station is marked authorized | 
 | 	 */ | 
 | 	if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
 | 		rate_control_rate_init(sta); | 
 |  | 
 | 	layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
 | 		sdata->vif.type == NL80211_IFTYPE_AP; | 
 |  | 
 | 	err = sta_info_insert_rcu(sta); | 
 | 	if (err) { | 
 | 		rcu_read_unlock(); | 
 | 		return err; | 
 | 	} | 
 |  | 
 | 	if (layer2_update) | 
 | 		ieee80211_send_layer2_update(sta); | 
 |  | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, | 
 | 				 struct station_del_parameters *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (params->mac) | 
 | 		return sta_info_destroy_addr_bss(sdata, params->mac); | 
 |  | 
 | 	sta_info_flush(sdata); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_change_station(struct wiphy *wiphy, | 
 | 				    struct net_device *dev, const u8 *mac, | 
 | 				    struct station_parameters *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct sta_info *sta; | 
 | 	struct ieee80211_sub_if_data *vlansdata; | 
 | 	enum cfg80211_station_type statype; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	sta = sta_info_get_bss(sdata, mac); | 
 | 	if (!sta) { | 
 | 		err = -ENOENT; | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		if (sdata->u.mesh.user_mpm) | 
 | 			statype = CFG80211_STA_MESH_PEER_USER; | 
 | 		else | 
 | 			statype = CFG80211_STA_MESH_PEER_KERNEL; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		statype = CFG80211_STA_IBSS; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
 | 			statype = CFG80211_STA_AP_STA; | 
 | 			break; | 
 | 		} | 
 | 		if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
 | 			statype = CFG80211_STA_TDLS_PEER_ACTIVE; | 
 | 		else | 
 | 			statype = CFG80211_STA_TDLS_PEER_SETUP; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_AP: | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 		statype = CFG80211_STA_AP_CLIENT; | 
 | 		break; | 
 | 	default: | 
 | 		err = -EOPNOTSUPP; | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	err = cfg80211_check_station_change(wiphy, params, statype); | 
 | 	if (err) | 
 | 		goto out_err; | 
 |  | 
 | 	if (params->vlan && params->vlan != sta->sdata->dev) { | 
 | 		bool prev_4addr = false; | 
 | 		bool new_4addr = false; | 
 |  | 
 | 		vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); | 
 |  | 
 | 		if (params->vlan->ieee80211_ptr->use_4addr) { | 
 | 			if (vlansdata->u.vlan.sta) { | 
 | 				err = -EBUSY; | 
 | 				goto out_err; | 
 | 			} | 
 |  | 
 | 			rcu_assign_pointer(vlansdata->u.vlan.sta, sta); | 
 | 			new_4addr = true; | 
 | 		} | 
 |  | 
 | 		if (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 		    sta->sdata->u.vlan.sta) { | 
 | 			RCU_INIT_POINTER(sta->sdata->u.vlan.sta, NULL); | 
 | 			prev_4addr = true; | 
 | 		} | 
 |  | 
 | 		sta->sdata = vlansdata; | 
 |  | 
 | 		if (sta->sta_state == IEEE80211_STA_AUTHORIZED && | 
 | 		    prev_4addr != new_4addr) { | 
 | 			if (new_4addr) | 
 | 				atomic_dec(&sta->sdata->bss->num_mcast_sta); | 
 | 			else | 
 | 				atomic_inc(&sta->sdata->bss->num_mcast_sta); | 
 | 		} | 
 |  | 
 | 		ieee80211_send_layer2_update(sta); | 
 | 	} | 
 |  | 
 | 	err = sta_apply_parameters(local, sta, params); | 
 | 	if (err) | 
 | 		goto out_err; | 
 |  | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	if ((sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	     sdata->vif.type == NL80211_IFTYPE_AP_VLAN) && | 
 | 	    sta->known_smps_mode != sta->sdata->bss->req_smps && | 
 | 	    test_sta_flag(sta, WLAN_STA_AUTHORIZED) && | 
 | 	    sta_info_tx_streams(sta) != 1) { | 
 | 		ht_dbg(sta->sdata, | 
 | 		       "%pM just authorized and MIMO capable - update SMPS\n", | 
 | 		       sta->sta.addr); | 
 | 		ieee80211_send_smps_action(sta->sdata, | 
 | 			sta->sdata->bss->req_smps, | 
 | 			sta->sta.addr, | 
 | 			sta->sdata->vif.bss_conf.bssid); | 
 | 	} | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
 | 	    params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { | 
 | 		ieee80211_recalc_ps(local, -1); | 
 | 		ieee80211_recalc_ps_vif(sdata); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | out_err: | 
 | 	mutex_unlock(&local->sta_mtx); | 
 | 	return err; | 
 | } | 
 |  | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       const u8 *dst, const u8 *next_hop) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	sta = sta_info_get(sdata, next_hop); | 
 | 	if (!sta) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	mpath = mesh_path_add(sdata, dst); | 
 | 	if (IS_ERR(mpath)) { | 
 | 		rcu_read_unlock(); | 
 | 		return PTR_ERR(mpath); | 
 | 	} | 
 |  | 
 | 	mesh_path_fix_nexthop(mpath, sta); | 
 |  | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       const u8 *dst) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (dst) | 
 | 		return mesh_path_del(sdata, dst); | 
 |  | 
 | 	mesh_path_flush_by_iface(sdata); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_change_mpath(struct wiphy *wiphy, struct net_device *dev, | 
 | 				  const u8 *dst, const u8 *next_hop) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 |  | 
 | 	sta = sta_info_get(sdata, next_hop); | 
 | 	if (!sta) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	mpath = mesh_path_lookup(sdata, dst); | 
 | 	if (!mpath) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	mesh_path_fix_nexthop(mpath, sta); | 
 |  | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, | 
 | 			    struct mpath_info *pinfo) | 
 | { | 
 | 	struct sta_info *next_hop_sta = rcu_dereference(mpath->next_hop); | 
 |  | 
 | 	if (next_hop_sta) | 
 | 		memcpy(next_hop, next_hop_sta->sta.addr, ETH_ALEN); | 
 | 	else | 
 | 		eth_zero_addr(next_hop); | 
 |  | 
 | 	memset(pinfo, 0, sizeof(*pinfo)); | 
 |  | 
 | 	pinfo->generation = mesh_paths_generation; | 
 |  | 
 | 	pinfo->filled = MPATH_INFO_FRAME_QLEN | | 
 | 			MPATH_INFO_SN | | 
 | 			MPATH_INFO_METRIC | | 
 | 			MPATH_INFO_EXPTIME | | 
 | 			MPATH_INFO_DISCOVERY_TIMEOUT | | 
 | 			MPATH_INFO_DISCOVERY_RETRIES | | 
 | 			MPATH_INFO_FLAGS; | 
 |  | 
 | 	pinfo->frame_qlen = mpath->frame_queue.qlen; | 
 | 	pinfo->sn = mpath->sn; | 
 | 	pinfo->metric = mpath->metric; | 
 | 	if (time_before(jiffies, mpath->exp_time)) | 
 | 		pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies); | 
 | 	pinfo->discovery_timeout = | 
 | 			jiffies_to_msecs(mpath->discovery_timeout); | 
 | 	pinfo->discovery_retries = mpath->discovery_retries; | 
 | 	if (mpath->flags & MESH_PATH_ACTIVE) | 
 | 		pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; | 
 | 	if (mpath->flags & MESH_PATH_RESOLVING) | 
 | 		pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; | 
 | 	if (mpath->flags & MESH_PATH_SN_VALID) | 
 | 		pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID; | 
 | 	if (mpath->flags & MESH_PATH_FIXED) | 
 | 		pinfo->flags |= NL80211_MPATH_FLAG_FIXED; | 
 | 	if (mpath->flags & MESH_PATH_RESOLVED) | 
 | 		pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED; | 
 | } | 
 |  | 
 | static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       u8 *dst, u8 *next_hop, struct mpath_info *pinfo) | 
 |  | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	mpath = mesh_path_lookup(sdata, dst); | 
 | 	if (!mpath) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 | 	memcpy(dst, mpath->dst, ETH_ALEN); | 
 | 	mpath_set_pinfo(mpath, next_hop, pinfo); | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev, | 
 | 				int idx, u8 *dst, u8 *next_hop, | 
 | 				struct mpath_info *pinfo) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	mpath = mesh_path_lookup_by_idx(sdata, idx); | 
 | 	if (!mpath) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 | 	memcpy(dst, mpath->dst, ETH_ALEN); | 
 | 	mpath_set_pinfo(mpath, next_hop, pinfo); | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void mpp_set_pinfo(struct mesh_path *mpath, u8 *mpp, | 
 | 			  struct mpath_info *pinfo) | 
 | { | 
 | 	memset(pinfo, 0, sizeof(*pinfo)); | 
 | 	memcpy(mpp, mpath->mpp, ETH_ALEN); | 
 |  | 
 | 	pinfo->generation = mpp_paths_generation; | 
 | } | 
 |  | 
 | static int ieee80211_get_mpp(struct wiphy *wiphy, struct net_device *dev, | 
 | 			     u8 *dst, u8 *mpp, struct mpath_info *pinfo) | 
 |  | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	mpath = mpp_path_lookup(sdata, dst); | 
 | 	if (!mpath) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 | 	memcpy(dst, mpath->dst, ETH_ALEN); | 
 | 	mpp_set_pinfo(mpath, mpp, pinfo); | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_dump_mpp(struct wiphy *wiphy, struct net_device *dev, | 
 | 			      int idx, u8 *dst, u8 *mpp, | 
 | 			      struct mpath_info *pinfo) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct mesh_path *mpath; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	mpath = mpp_path_lookup_by_idx(sdata, idx); | 
 | 	if (!mpath) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOENT; | 
 | 	} | 
 | 	memcpy(dst, mpath->dst, ETH_ALEN); | 
 | 	mpp_set_pinfo(mpath, mpp, pinfo); | 
 | 	rcu_read_unlock(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_get_mesh_config(struct wiphy *wiphy, | 
 | 				struct net_device *dev, | 
 | 				struct mesh_config *conf) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask) | 
 | { | 
 | 	return (mask >> (parm-1)) & 0x1; | 
 | } | 
 |  | 
 | static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, | 
 | 		const struct mesh_setup *setup) | 
 | { | 
 | 	u8 *new_ie; | 
 | 	const u8 *old_ie; | 
 | 	struct ieee80211_sub_if_data *sdata = container_of(ifmsh, | 
 | 					struct ieee80211_sub_if_data, u.mesh); | 
 |  | 
 | 	/* allocate information elements */ | 
 | 	new_ie = NULL; | 
 | 	old_ie = ifmsh->ie; | 
 |  | 
 | 	if (setup->ie_len) { | 
 | 		new_ie = kmemdup(setup->ie, setup->ie_len, | 
 | 				GFP_KERNEL); | 
 | 		if (!new_ie) | 
 | 			return -ENOMEM; | 
 | 	} | 
 | 	ifmsh->ie_len = setup->ie_len; | 
 | 	ifmsh->ie = new_ie; | 
 | 	kfree(old_ie); | 
 |  | 
 | 	/* now copy the rest of the setup parameters */ | 
 | 	ifmsh->mesh_id_len = setup->mesh_id_len; | 
 | 	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len); | 
 | 	ifmsh->mesh_sp_id = setup->sync_method; | 
 | 	ifmsh->mesh_pp_id = setup->path_sel_proto; | 
 | 	ifmsh->mesh_pm_id = setup->path_metric; | 
 | 	ifmsh->user_mpm = setup->user_mpm; | 
 | 	ifmsh->mesh_auth_id = setup->auth_id; | 
 | 	ifmsh->security = IEEE80211_MESH_SEC_NONE; | 
 | 	if (setup->is_authenticated) | 
 | 		ifmsh->security |= IEEE80211_MESH_SEC_AUTHED; | 
 | 	if (setup->is_secure) | 
 | 		ifmsh->security |= IEEE80211_MESH_SEC_SECURED; | 
 |  | 
 | 	/* mcast rate setting in Mesh Node */ | 
 | 	memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, | 
 | 						sizeof(setup->mcast_rate)); | 
 | 	sdata->vif.bss_conf.basic_rates = setup->basic_rates; | 
 |  | 
 | 	sdata->vif.bss_conf.beacon_int = setup->beacon_interval; | 
 | 	sdata->vif.bss_conf.dtim_period = setup->dtim_period; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_update_mesh_config(struct wiphy *wiphy, | 
 | 					struct net_device *dev, u32 mask, | 
 | 					const struct mesh_config *nconf) | 
 | { | 
 | 	struct mesh_config *conf; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	struct ieee80211_if_mesh *ifmsh; | 
 |  | 
 | 	sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	ifmsh = &sdata->u.mesh; | 
 |  | 
 | 	/* Set the config options which we are interested in setting */ | 
 | 	conf = &(sdata->u.mesh.mshcfg); | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask)) | 
 | 		conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask)) | 
 | 		conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask)) | 
 | 		conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask)) | 
 | 		conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask)) | 
 | 		conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask)) | 
 | 		conf->dot11MeshTTL = nconf->dot11MeshTTL; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask)) | 
 | 		conf->element_ttl = nconf->element_ttl; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask)) { | 
 | 		if (ifmsh->user_mpm) | 
 | 			return -EBUSY; | 
 | 		conf->auto_open_plinks = nconf->auto_open_plinks; | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, mask)) | 
 | 		conf->dot11MeshNbrOffsetMaxNeighbor = | 
 | 			nconf->dot11MeshNbrOffsetMaxNeighbor; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask)) | 
 | 		conf->dot11MeshHWMPmaxPREQretries = | 
 | 			nconf->dot11MeshHWMPmaxPREQretries; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask)) | 
 | 		conf->path_refresh_time = nconf->path_refresh_time; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask)) | 
 | 		conf->min_discovery_timeout = nconf->min_discovery_timeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask)) | 
 | 		conf->dot11MeshHWMPactivePathTimeout = | 
 | 			nconf->dot11MeshHWMPactivePathTimeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask)) | 
 | 		conf->dot11MeshHWMPpreqMinInterval = | 
 | 			nconf->dot11MeshHWMPpreqMinInterval; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, mask)) | 
 | 		conf->dot11MeshHWMPperrMinInterval = | 
 | 			nconf->dot11MeshHWMPperrMinInterval; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | 
 | 			   mask)) | 
 | 		conf->dot11MeshHWMPnetDiameterTraversalTime = | 
 | 			nconf->dot11MeshHWMPnetDiameterTraversalTime; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) { | 
 | 		conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode; | 
 | 		ieee80211_mesh_root_setup(ifmsh); | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_GATE_ANNOUNCEMENTS, mask)) { | 
 | 		/* our current gate announcement implementation rides on root | 
 | 		 * announcements, so require this ifmsh to also be a root node | 
 | 		 * */ | 
 | 		if (nconf->dot11MeshGateAnnouncementProtocol && | 
 | 		    !(conf->dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)) { | 
 | 			conf->dot11MeshHWMPRootMode = IEEE80211_PROACTIVE_RANN; | 
 | 			ieee80211_mesh_root_setup(ifmsh); | 
 | 		} | 
 | 		conf->dot11MeshGateAnnouncementProtocol = | 
 | 			nconf->dot11MeshGateAnnouncementProtocol; | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) | 
 | 		conf->dot11MeshHWMPRannInterval = | 
 | 			nconf->dot11MeshHWMPRannInterval; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask)) | 
 | 		conf->dot11MeshForwarding = nconf->dot11MeshForwarding; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) { | 
 | 		/* our RSSI threshold implementation is supported only for | 
 | 		 * devices that report signal in dBm. | 
 | 		 */ | 
 | 		if (!(sdata->local->hw.flags & IEEE80211_HW_SIGNAL_DBM)) | 
 | 			return -ENOTSUPP; | 
 | 		conf->rssi_threshold = nconf->rssi_threshold; | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HT_OPMODE, mask)) { | 
 | 		conf->ht_opmode = nconf->ht_opmode; | 
 | 		sdata->vif.bss_conf.ht_operation_mode = nconf->ht_opmode; | 
 | 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT); | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, mask)) | 
 | 		conf->dot11MeshHWMPactivePathToRootTimeout = | 
 | 			nconf->dot11MeshHWMPactivePathToRootTimeout; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOT_INTERVAL, mask)) | 
 | 		conf->dot11MeshHWMProotInterval = | 
 | 			nconf->dot11MeshHWMProotInterval; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, mask)) | 
 | 		conf->dot11MeshHWMPconfirmationInterval = | 
 | 			nconf->dot11MeshHWMPconfirmationInterval; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_POWER_MODE, mask)) { | 
 | 		conf->power_mode = nconf->power_mode; | 
 | 		ieee80211_mps_local_status_update(sdata); | 
 | 	} | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) | 
 | 		conf->dot11MeshAwakeWindowDuration = | 
 | 			nconf->dot11MeshAwakeWindowDuration; | 
 | 	if (_chg_mesh_attr(NL80211_MESHCONF_PLINK_TIMEOUT, mask)) | 
 | 		conf->plink_timeout = nconf->plink_timeout; | 
 | 	ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       const struct mesh_config *conf, | 
 | 			       const struct mesh_setup *setup) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 | 	int err; | 
 |  | 
 | 	memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config)); | 
 | 	err = copy_mesh_setup(ifmsh, setup); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	/* can mesh use other SMPS modes? */ | 
 | 	sdata->smps_mode = IEEE80211_SMPS_OFF; | 
 | 	sdata->needed_rx_chains = sdata->local->rx_chains; | 
 |  | 
 | 	mutex_lock(&sdata->local->mtx); | 
 | 	err = ieee80211_vif_use_channel(sdata, &setup->chandef, | 
 | 					IEEE80211_CHANCTX_SHARED); | 
 | 	mutex_unlock(&sdata->local->mtx); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	return ieee80211_start_mesh(sdata); | 
 | } | 
 |  | 
 | static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	ieee80211_stop_mesh(sdata); | 
 | 	mutex_lock(&sdata->local->mtx); | 
 | 	ieee80211_vif_release_channel(sdata); | 
 | 	mutex_unlock(&sdata->local->mtx); | 
 |  | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static int ieee80211_change_bss(struct wiphy *wiphy, | 
 | 				struct net_device *dev, | 
 | 				struct bss_parameters *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	enum ieee80211_band band; | 
 | 	u32 changed = 0; | 
 |  | 
 | 	if (!sdata_dereference(sdata->u.ap.beacon, sdata)) | 
 | 		return -ENOENT; | 
 |  | 
 | 	band = ieee80211_get_sdata_band(sdata); | 
 |  | 
 | 	if (params->use_cts_prot >= 0) { | 
 | 		sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot; | 
 | 		changed |= BSS_CHANGED_ERP_CTS_PROT; | 
 | 	} | 
 | 	if (params->use_short_preamble >= 0) { | 
 | 		sdata->vif.bss_conf.use_short_preamble = | 
 | 			params->use_short_preamble; | 
 | 		changed |= BSS_CHANGED_ERP_PREAMBLE; | 
 | 	} | 
 |  | 
 | 	if (!sdata->vif.bss_conf.use_short_slot && | 
 | 	    band == IEEE80211_BAND_5GHZ) { | 
 | 		sdata->vif.bss_conf.use_short_slot = true; | 
 | 		changed |= BSS_CHANGED_ERP_SLOT; | 
 | 	} | 
 |  | 
 | 	if (params->use_short_slot_time >= 0) { | 
 | 		sdata->vif.bss_conf.use_short_slot = | 
 | 			params->use_short_slot_time; | 
 | 		changed |= BSS_CHANGED_ERP_SLOT; | 
 | 	} | 
 |  | 
 | 	if (params->basic_rates) { | 
 | 		ieee80211_parse_bitrates(&sdata->vif.bss_conf.chandef, | 
 | 					 wiphy->bands[band], | 
 | 					 params->basic_rates, | 
 | 					 params->basic_rates_len, | 
 | 					 &sdata->vif.bss_conf.basic_rates); | 
 | 		changed |= BSS_CHANGED_BASIC_RATES; | 
 | 	} | 
 |  | 
 | 	if (params->ap_isolate >= 0) { | 
 | 		if (params->ap_isolate) | 
 | 			sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | 
 | 		else | 
 | 			sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS; | 
 | 	} | 
 |  | 
 | 	if (params->ht_opmode >= 0) { | 
 | 		sdata->vif.bss_conf.ht_operation_mode = | 
 | 			(u16) params->ht_opmode; | 
 | 		changed |= BSS_CHANGED_HT; | 
 | 	} | 
 |  | 
 | 	if (params->p2p_ctwindow >= 0) { | 
 | 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | 
 | 					~IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
 | 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
 | 			params->p2p_ctwindow & IEEE80211_P2P_OPPPS_CTWINDOW_MASK; | 
 | 		changed |= BSS_CHANGED_P2P_PS; | 
 | 	} | 
 |  | 
 | 	if (params->p2p_opp_ps > 0) { | 
 | 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow |= | 
 | 					IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
 | 		changed |= BSS_CHANGED_P2P_PS; | 
 | 	} else if (params->p2p_opp_ps == 0) { | 
 | 		sdata->vif.bss_conf.p2p_noa_attr.oppps_ctwindow &= | 
 | 					~IEEE80211_P2P_OPPPS_ENABLE_BIT; | 
 | 		changed |= BSS_CHANGED_P2P_PS; | 
 | 	} | 
 |  | 
 | 	ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_txq_params(struct wiphy *wiphy, | 
 | 				    struct net_device *dev, | 
 | 				    struct ieee80211_txq_params *params) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_tx_queue_params p; | 
 |  | 
 | 	if (!local->ops->conf_tx) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (local->hw.queues < IEEE80211_NUM_ACS) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	memset(&p, 0, sizeof(p)); | 
 | 	p.aifs = params->aifs; | 
 | 	p.cw_max = params->cwmax; | 
 | 	p.cw_min = params->cwmin; | 
 | 	p.txop = params->txop; | 
 |  | 
 | 	/* | 
 | 	 * Setting tx queue params disables u-apsd because it's only | 
 | 	 * called in master mode. | 
 | 	 */ | 
 | 	p.uapsd = false; | 
 |  | 
 | 	sdata->tx_conf[params->ac] = p; | 
 | 	if (drv_conf_tx(local, sdata, params->ac, &p)) { | 
 | 		wiphy_debug(local->hw.wiphy, | 
 | 			    "failed to set TX queue parameters for AC %d\n", | 
 | 			    params->ac); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int ieee80211_suspend(struct wiphy *wiphy, | 
 | 			     struct cfg80211_wowlan *wowlan) | 
 | { | 
 | 	return __ieee80211_suspend(wiphy_priv(wiphy), wowlan); | 
 | } | 
 |  | 
 | static int ieee80211_resume(struct wiphy *wiphy) | 
 | { | 
 | 	return __ieee80211_resume(wiphy_priv(wiphy)); | 
 | } | 
 | #else | 
 | #define ieee80211_suspend NULL | 
 | #define ieee80211_resume NULL | 
 | #endif | 
 |  | 
 | static int ieee80211_scan(struct wiphy *wiphy, | 
 | 			  struct cfg80211_scan_request *req) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 |  | 
 | 	sdata = IEEE80211_WDEV_TO_SUB_IF(req->wdev); | 
 |  | 
 | 	switch (ieee80211_vif_type_p2p(&sdata->vif)) { | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 	case NL80211_IFTYPE_P2P_CLIENT: | 
 | 	case NL80211_IFTYPE_P2P_DEVICE: | 
 | 		break; | 
 | 	case NL80211_IFTYPE_P2P_GO: | 
 | 		if (sdata->local->ops->hw_scan) | 
 | 			break; | 
 | 		/* | 
 | 		 * FIXME: implement NoA while scanning in software, | 
 | 		 * for now fall through to allow scanning only when | 
 | 		 * beaconing hasn't been configured yet | 
 | 		 */ | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		/* | 
 | 		 * If the scan has been forced (and the driver supports | 
 | 		 * forcing), don't care about being beaconing already. | 
 | 		 * This will create problems to the attached stations (e.g. all | 
 | 		 * the  frames sent while scanning on other channel will be | 
 | 		 * lost) | 
 | 		 */ | 
 | 		if (sdata->u.ap.beacon && | 
 | 		    (!(wiphy->features & NL80211_FEATURE_AP_SCAN) || | 
 | 		     !(req->flags & NL80211_SCAN_FLAG_AP))) | 
 | 			return -EOPNOTSUPP; | 
 | 		break; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	return ieee80211_request_scan(sdata, req); | 
 | } | 
 |  | 
 | static int | 
 | ieee80211_sched_scan_start(struct wiphy *wiphy, | 
 | 			   struct net_device *dev, | 
 | 			   struct cfg80211_sched_scan_request *req) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (!sdata->local->ops->sched_scan_start) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	return ieee80211_request_sched_scan_start(sdata, req); | 
 | } | 
 |  | 
 | static int | 
 | ieee80211_sched_scan_stop(struct wiphy *wiphy, struct net_device *dev) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (!sdata->local->ops->sched_scan_stop) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	return ieee80211_request_sched_scan_stop(sdata); | 
 | } | 
 |  | 
 | static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev, | 
 | 			  struct cfg80211_auth_request *req) | 
 | { | 
 | 	return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
 | } | 
 |  | 
 | static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev, | 
 | 			   struct cfg80211_assoc_request *req) | 
 | { | 
 | 	return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
 | } | 
 |  | 
 | static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev, | 
 | 			    struct cfg80211_deauth_request *req) | 
 | { | 
 | 	return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
 | } | 
 |  | 
 | static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev, | 
 | 			      struct cfg80211_disassoc_request *req) | 
 | { | 
 | 	return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev), req); | 
 | } | 
 |  | 
 | static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       struct cfg80211_ibss_params *params) | 
 | { | 
 | 	return ieee80211_ibss_join(IEEE80211_DEV_TO_SUB_IF(dev), params); | 
 | } | 
 |  | 
 | static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) | 
 | { | 
 | 	return ieee80211_ibss_leave(IEEE80211_DEV_TO_SUB_IF(dev)); | 
 | } | 
 |  | 
 | static int ieee80211_join_ocb(struct wiphy *wiphy, struct net_device *dev, | 
 | 			      struct ocb_setup *setup) | 
 | { | 
 | 	return ieee80211_ocb_join(IEEE80211_DEV_TO_SUB_IF(dev), setup); | 
 | } | 
 |  | 
 | static int ieee80211_leave_ocb(struct wiphy *wiphy, struct net_device *dev) | 
 | { | 
 | 	return ieee80211_ocb_leave(IEEE80211_DEV_TO_SUB_IF(dev)); | 
 | } | 
 |  | 
 | static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, | 
 | 				    int rate[IEEE80211_NUM_BANDS]) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	memcpy(sdata->vif.bss_conf.mcast_rate, rate, | 
 | 	       sizeof(int) * IEEE80211_NUM_BANDS); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	int err; | 
 |  | 
 | 	if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { | 
 | 		err = drv_set_frag_threshold(local, wiphy->frag_threshold); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if ((changed & WIPHY_PARAM_COVERAGE_CLASS) || | 
 | 	    (changed & WIPHY_PARAM_DYN_ACK)) { | 
 | 		s16 coverage_class; | 
 |  | 
 | 		coverage_class = changed & WIPHY_PARAM_COVERAGE_CLASS ? | 
 | 					wiphy->coverage_class : -1; | 
 | 		err = drv_set_coverage_class(local, coverage_class); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (changed & WIPHY_PARAM_RTS_THRESHOLD) { | 
 | 		err = drv_set_rts_threshold(local, wiphy->rts_threshold); | 
 |  | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	if (changed & WIPHY_PARAM_RETRY_SHORT) { | 
 | 		if (wiphy->retry_short > IEEE80211_MAX_TX_RETRY) | 
 | 			return -EINVAL; | 
 | 		local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; | 
 | 	} | 
 | 	if (changed & WIPHY_PARAM_RETRY_LONG) { | 
 | 		if (wiphy->retry_long > IEEE80211_MAX_TX_RETRY) | 
 | 			return -EINVAL; | 
 | 		local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; | 
 | 	} | 
 | 	if (changed & | 
 | 	    (WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG)) | 
 | 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_tx_power(struct wiphy *wiphy, | 
 | 				  struct wireless_dev *wdev, | 
 | 				  enum nl80211_tx_power_setting type, int mbm) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	enum nl80211_tx_power_setting txp_type = type; | 
 | 	bool update_txp_type = false; | 
 |  | 
 | 	if (wdev) { | 
 | 		sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 |  | 
 | 		switch (type) { | 
 | 		case NL80211_TX_POWER_AUTOMATIC: | 
 | 			sdata->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | 
 | 			txp_type = NL80211_TX_POWER_LIMITED; | 
 | 			break; | 
 | 		case NL80211_TX_POWER_LIMITED: | 
 | 		case NL80211_TX_POWER_FIXED: | 
 | 			if (mbm < 0 || (mbm % 100)) | 
 | 				return -EOPNOTSUPP; | 
 | 			sdata->user_power_level = MBM_TO_DBM(mbm); | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (txp_type != sdata->vif.bss_conf.txpower_type) { | 
 | 			update_txp_type = true; | 
 | 			sdata->vif.bss_conf.txpower_type = txp_type; | 
 | 		} | 
 |  | 
 | 		ieee80211_recalc_txpower(sdata, update_txp_type); | 
 |  | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	switch (type) { | 
 | 	case NL80211_TX_POWER_AUTOMATIC: | 
 | 		local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | 
 | 		txp_type = NL80211_TX_POWER_LIMITED; | 
 | 		break; | 
 | 	case NL80211_TX_POWER_LIMITED: | 
 | 	case NL80211_TX_POWER_FIXED: | 
 | 		if (mbm < 0 || (mbm % 100)) | 
 | 			return -EOPNOTSUPP; | 
 | 		local->user_power_level = MBM_TO_DBM(mbm); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&local->iflist_mtx); | 
 | 	list_for_each_entry(sdata, &local->interfaces, list) { | 
 | 		sdata->user_power_level = local->user_power_level; | 
 | 		if (txp_type != sdata->vif.bss_conf.txpower_type) | 
 | 			update_txp_type = true; | 
 | 		sdata->vif.bss_conf.txpower_type = txp_type; | 
 | 	} | 
 | 	list_for_each_entry(sdata, &local->interfaces, list) | 
 | 		ieee80211_recalc_txpower(sdata, update_txp_type); | 
 | 	mutex_unlock(&local->iflist_mtx); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_get_tx_power(struct wiphy *wiphy, | 
 | 				  struct wireless_dev *wdev, | 
 | 				  int *dbm) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 |  | 
 | 	if (local->ops->get_txpower) | 
 | 		return drv_get_txpower(local, sdata, dbm); | 
 |  | 
 | 	if (!local->use_chanctx) | 
 | 		*dbm = local->hw.conf.power_level; | 
 | 	else | 
 | 		*dbm = sdata->vif.bss_conf.txpower; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, | 
 | 				  const u8 *addr) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ieee80211_rfkill_poll(struct wiphy *wiphy) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	drv_rfkill_poll(local); | 
 | } | 
 |  | 
 | #ifdef CONFIG_NL80211_TESTMODE | 
 | static int ieee80211_testmode_cmd(struct wiphy *wiphy, | 
 | 				  struct wireless_dev *wdev, | 
 | 				  void *data, int len) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_vif *vif = NULL; | 
 |  | 
 | 	if (!local->ops->testmode_cmd) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (wdev) { | 
 | 		struct ieee80211_sub_if_data *sdata; | 
 |  | 
 | 		sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 		if (sdata->flags & IEEE80211_SDATA_IN_DRIVER) | 
 | 			vif = &sdata->vif; | 
 | 	} | 
 |  | 
 | 	return local->ops->testmode_cmd(&local->hw, vif, data, len); | 
 | } | 
 |  | 
 | static int ieee80211_testmode_dump(struct wiphy *wiphy, | 
 | 				   struct sk_buff *skb, | 
 | 				   struct netlink_callback *cb, | 
 | 				   void *data, int len) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	if (!local->ops->testmode_dump) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	return local->ops->testmode_dump(&local->hw, skb, cb, data, len); | 
 | } | 
 | #endif | 
 |  | 
 | int __ieee80211_request_smps_ap(struct ieee80211_sub_if_data *sdata, | 
 | 				enum ieee80211_smps_mode smps_mode) | 
 | { | 
 | 	struct sta_info *sta; | 
 | 	enum ieee80211_smps_mode old_req; | 
 |  | 
 | 	if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) | 
 | 		return 0; | 
 |  | 
 | 	old_req = sdata->u.ap.req_smps; | 
 | 	sdata->u.ap.req_smps = smps_mode; | 
 |  | 
 | 	/* AUTOMATIC doesn't mean much for AP - don't allow it */ | 
 | 	if (old_req == smps_mode || | 
 | 	    smps_mode == IEEE80211_SMPS_AUTOMATIC) | 
 | 		return 0; | 
 |  | 
 | 	 /* If no associated stations, there's no need to do anything */ | 
 | 	if (!atomic_read(&sdata->u.ap.num_mcast_sta)) { | 
 | 		sdata->smps_mode = smps_mode; | 
 | 		ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	ht_dbg(sdata, | 
 | 	       "SMPS %d requested in AP mode, sending Action frame to %d stations\n", | 
 | 	       smps_mode, atomic_read(&sdata->u.ap.num_mcast_sta)); | 
 |  | 
 | 	mutex_lock(&sdata->local->sta_mtx); | 
 | 	list_for_each_entry(sta, &sdata->local->sta_list, list) { | 
 | 		/* | 
 | 		 * Only stations associated to our AP and | 
 | 		 * associated VLANs | 
 | 		 */ | 
 | 		if (sta->sdata->bss != &sdata->u.ap) | 
 | 			continue; | 
 |  | 
 | 		/* This station doesn't support MIMO - skip it */ | 
 | 		if (sta_info_tx_streams(sta) == 1) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * Don't wake up a STA just to send the action frame | 
 | 		 * unless we are getting more restrictive. | 
 | 		 */ | 
 | 		if (test_sta_flag(sta, WLAN_STA_PS_STA) && | 
 | 		    !ieee80211_smps_is_restrictive(sta->known_smps_mode, | 
 | 						   smps_mode)) { | 
 | 			ht_dbg(sdata, "Won't send SMPS to sleeping STA %pM\n", | 
 | 			       sta->sta.addr); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * If the STA is not authorized, wait until it gets | 
 | 		 * authorized and the action frame will be sent then. | 
 | 		 */ | 
 | 		if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
 | 			continue; | 
 |  | 
 | 		ht_dbg(sdata, "Sending SMPS to %pM\n", sta->sta.addr); | 
 | 		ieee80211_send_smps_action(sdata, smps_mode, sta->sta.addr, | 
 | 					   sdata->vif.bss_conf.bssid); | 
 | 	} | 
 | 	mutex_unlock(&sdata->local->sta_mtx); | 
 |  | 
 | 	sdata->smps_mode = smps_mode; | 
 | 	ieee80211_queue_work(&sdata->local->hw, &sdata->recalc_smps); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int __ieee80211_request_smps_mgd(struct ieee80211_sub_if_data *sdata, | 
 | 				 enum ieee80211_smps_mode smps_mode) | 
 | { | 
 | 	const u8 *ap; | 
 | 	enum ieee80211_smps_mode old_req; | 
 | 	int err; | 
 |  | 
 | 	lockdep_assert_held(&sdata->wdev.mtx); | 
 |  | 
 | 	if (WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_STATION)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	old_req = sdata->u.mgd.req_smps; | 
 | 	sdata->u.mgd.req_smps = smps_mode; | 
 |  | 
 | 	if (old_req == smps_mode && | 
 | 	    smps_mode != IEEE80211_SMPS_AUTOMATIC) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * If not associated, or current association is not an HT | 
 | 	 * association, there's no need to do anything, just store | 
 | 	 * the new value until we associate. | 
 | 	 */ | 
 | 	if (!sdata->u.mgd.associated || | 
 | 	    sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) | 
 | 		return 0; | 
 |  | 
 | 	ap = sdata->u.mgd.associated->bssid; | 
 |  | 
 | 	if (smps_mode == IEEE80211_SMPS_AUTOMATIC) { | 
 | 		if (sdata->u.mgd.powersave) | 
 | 			smps_mode = IEEE80211_SMPS_DYNAMIC; | 
 | 		else | 
 | 			smps_mode = IEEE80211_SMPS_OFF; | 
 | 	} | 
 |  | 
 | 	/* send SM PS frame to AP */ | 
 | 	err = ieee80211_send_smps_action(sdata, smps_mode, | 
 | 					 ap, ap); | 
 | 	if (err) | 
 | 		sdata->u.mgd.req_smps = old_req; | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, | 
 | 				    bool enabled, int timeout) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (enabled == sdata->u.mgd.powersave && | 
 | 	    timeout == local->dynamic_ps_forced_timeout) | 
 | 		return 0; | 
 |  | 
 | 	sdata->u.mgd.powersave = enabled; | 
 | 	local->dynamic_ps_forced_timeout = timeout; | 
 |  | 
 | 	/* no change, but if automatic follow powersave */ | 
 | 	sdata_lock(sdata); | 
 | 	__ieee80211_request_smps_mgd(sdata, sdata->u.mgd.req_smps); | 
 | 	sdata_unlock(sdata); | 
 |  | 
 | 	if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS) | 
 | 		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); | 
 |  | 
 | 	ieee80211_recalc_ps(local, -1); | 
 | 	ieee80211_recalc_ps_vif(sdata); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy, | 
 | 					 struct net_device *dev, | 
 | 					 s32 rssi_thold, u32 rssi_hyst) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_vif *vif = &sdata->vif; | 
 | 	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf; | 
 |  | 
 | 	if (rssi_thold == bss_conf->cqm_rssi_thold && | 
 | 	    rssi_hyst == bss_conf->cqm_rssi_hyst) | 
 | 		return 0; | 
 |  | 
 | 	bss_conf->cqm_rssi_thold = rssi_thold; | 
 | 	bss_conf->cqm_rssi_hyst = rssi_hyst; | 
 |  | 
 | 	/* tell the driver upon association, unless already associated */ | 
 | 	if (sdata->u.mgd.associated && | 
 | 	    sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI) | 
 | 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_bitrate_mask(struct wiphy *wiphy, | 
 | 				      struct net_device *dev, | 
 | 				      const u8 *addr, | 
 | 				      const struct cfg80211_bitrate_mask *mask) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | 
 | 	int i, ret; | 
 |  | 
 | 	if (!ieee80211_sdata_running(sdata)) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) { | 
 | 		ret = drv_set_bitrate_mask(local, sdata, mask); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < IEEE80211_NUM_BANDS; i++) { | 
 | 		struct ieee80211_supported_band *sband = wiphy->bands[i]; | 
 | 		int j; | 
 |  | 
 | 		sdata->rc_rateidx_mask[i] = mask->control[i].legacy; | 
 | 		memcpy(sdata->rc_rateidx_mcs_mask[i], mask->control[i].ht_mcs, | 
 | 		       sizeof(mask->control[i].ht_mcs)); | 
 |  | 
 | 		sdata->rc_has_mcs_mask[i] = false; | 
 | 		if (!sband) | 
 | 			continue; | 
 |  | 
 | 		for (j = 0; j < IEEE80211_HT_MCS_MASK_LEN; j++) | 
 | 			if (~sdata->rc_rateidx_mcs_mask[i][j]) { | 
 | 				sdata->rc_has_mcs_mask[i] = true; | 
 | 				break; | 
 | 			} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static bool ieee80211_coalesce_started_roc(struct ieee80211_local *local, | 
 | 					   struct ieee80211_roc_work *new_roc, | 
 | 					   struct ieee80211_roc_work *cur_roc) | 
 | { | 
 | 	unsigned long now = jiffies; | 
 | 	unsigned long remaining = cur_roc->hw_start_time + | 
 | 				  msecs_to_jiffies(cur_roc->duration) - | 
 | 				  now; | 
 |  | 
 | 	if (WARN_ON(!cur_roc->started || !cur_roc->hw_begun)) | 
 | 		return false; | 
 |  | 
 | 	/* if it doesn't fit entirely, schedule a new one */ | 
 | 	if (new_roc->duration > jiffies_to_msecs(remaining)) | 
 | 		return false; | 
 |  | 
 | 	ieee80211_handle_roc_started(new_roc); | 
 |  | 
 | 	/* add to dependents so we send the expired event properly */ | 
 | 	list_add_tail(&new_roc->list, &cur_roc->dependents); | 
 | 	return true; | 
 | } | 
 |  | 
 | static int ieee80211_start_roc_work(struct ieee80211_local *local, | 
 | 				    struct ieee80211_sub_if_data *sdata, | 
 | 				    struct ieee80211_channel *channel, | 
 | 				    unsigned int duration, u64 *cookie, | 
 | 				    struct sk_buff *txskb, | 
 | 				    enum ieee80211_roc_type type) | 
 | { | 
 | 	struct ieee80211_roc_work *roc, *tmp; | 
 | 	bool queued = false; | 
 | 	int ret; | 
 |  | 
 | 	lockdep_assert_held(&local->mtx); | 
 |  | 
 | 	if (local->use_chanctx && !local->ops->remain_on_channel) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	roc = kzalloc(sizeof(*roc), GFP_KERNEL); | 
 | 	if (!roc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* | 
 | 	 * If the duration is zero, then the driver | 
 | 	 * wouldn't actually do anything. Set it to | 
 | 	 * 10 for now. | 
 | 	 * | 
 | 	 * TODO: cancel the off-channel operation | 
 | 	 *       when we get the SKB's TX status and | 
 | 	 *       the wait time was zero before. | 
 | 	 */ | 
 | 	if (!duration) | 
 | 		duration = 10; | 
 |  | 
 | 	roc->chan = channel; | 
 | 	roc->duration = duration; | 
 | 	roc->req_duration = duration; | 
 | 	roc->frame = txskb; | 
 | 	roc->type = type; | 
 | 	roc->mgmt_tx_cookie = (unsigned long)txskb; | 
 | 	roc->sdata = sdata; | 
 | 	INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work); | 
 | 	INIT_LIST_HEAD(&roc->dependents); | 
 |  | 
 | 	/* | 
 | 	 * cookie is either the roc cookie (for normal roc) | 
 | 	 * or the SKB (for mgmt TX) | 
 | 	 */ | 
 | 	if (!txskb) { | 
 | 		/* local->mtx protects this */ | 
 | 		local->roc_cookie_counter++; | 
 | 		roc->cookie = local->roc_cookie_counter; | 
 | 		/* wow, you wrapped 64 bits ... more likely a bug */ | 
 | 		if (WARN_ON(roc->cookie == 0)) { | 
 | 			roc->cookie = 1; | 
 | 			local->roc_cookie_counter++; | 
 | 		} | 
 | 		*cookie = roc->cookie; | 
 | 	} else { | 
 | 		*cookie = (unsigned long)txskb; | 
 | 	} | 
 |  | 
 | 	/* if there's one pending or we're scanning, queue this one */ | 
 | 	if (!list_empty(&local->roc_list) || | 
 | 	    local->scanning || ieee80211_is_radar_required(local)) | 
 | 		goto out_check_combine; | 
 |  | 
 | 	/* if not HW assist, just queue & schedule work */ | 
 | 	if (!local->ops->remain_on_channel) { | 
 | 		ieee80211_queue_delayed_work(&local->hw, &roc->work, 0); | 
 | 		goto out_queue; | 
 | 	} | 
 |  | 
 | 	/* otherwise actually kick it off here (for error handling) */ | 
 |  | 
 | 	ret = drv_remain_on_channel(local, sdata, channel, duration, type); | 
 | 	if (ret) { | 
 | 		kfree(roc); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	roc->started = true; | 
 | 	goto out_queue; | 
 |  | 
 |  out_check_combine: | 
 | 	list_for_each_entry(tmp, &local->roc_list, list) { | 
 | 		if (tmp->chan != channel || tmp->sdata != sdata) | 
 | 			continue; | 
 |  | 
 | 		/* | 
 | 		 * Extend this ROC if possible: | 
 | 		 * | 
 | 		 * If it hasn't started yet, just increase the duration | 
 | 		 * and add the new one to the list of dependents. | 
 | 		 * If the type of the new ROC has higher priority, modify the | 
 | 		 * type of the previous one to match that of the new one. | 
 | 		 */ | 
 | 		if (!tmp->started) { | 
 | 			list_add_tail(&roc->list, &tmp->dependents); | 
 | 			tmp->duration = max(tmp->duration, roc->duration); | 
 | 			tmp->type = max(tmp->type, roc->type); | 
 | 			queued = true; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		/* If it has already started, it's more difficult ... */ | 
 | 		if (local->ops->remain_on_channel) { | 
 | 			/* | 
 | 			 * In the offloaded ROC case, if it hasn't begun, add | 
 | 			 * this new one to the dependent list to be handled | 
 | 			 * when the master one begins. If it has begun, | 
 | 			 * check if it fits entirely within the existing one, | 
 | 			 * in which case it will just be dependent as well. | 
 | 			 * Otherwise, schedule it by itself. | 
 | 			 */ | 
 | 			if (!tmp->hw_begun) { | 
 | 				list_add_tail(&roc->list, &tmp->dependents); | 
 | 				queued = true; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			if (ieee80211_coalesce_started_roc(local, roc, tmp)) | 
 | 				queued = true; | 
 | 		} else if (del_timer_sync(&tmp->work.timer)) { | 
 | 			unsigned long new_end; | 
 |  | 
 | 			/* | 
 | 			 * In the software ROC case, cancel the timer, if | 
 | 			 * that fails then the finish work is already | 
 | 			 * queued/pending and thus we queue the new ROC | 
 | 			 * normally, if that succeeds then we can extend | 
 | 			 * the timer duration and TX the frame (if any.) | 
 | 			 */ | 
 |  | 
 | 			list_add_tail(&roc->list, &tmp->dependents); | 
 | 			queued = true; | 
 |  | 
 | 			new_end = jiffies + msecs_to_jiffies(roc->duration); | 
 |  | 
 | 			/* ok, it was started & we canceled timer */ | 
 | 			if (time_after(new_end, tmp->work.timer.expires)) | 
 | 				mod_timer(&tmp->work.timer, new_end); | 
 | 			else | 
 | 				add_timer(&tmp->work.timer); | 
 |  | 
 | 			ieee80211_handle_roc_started(roc); | 
 | 		} | 
 | 		break; | 
 | 	} | 
 |  | 
 |  out_queue: | 
 | 	if (!queued) | 
 | 		list_add_tail(&roc->list, &local->roc_list); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_remain_on_channel(struct wiphy *wiphy, | 
 | 				       struct wireless_dev *wdev, | 
 | 				       struct ieee80211_channel *chan, | 
 | 				       unsigned int duration, | 
 | 				       u64 *cookie) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	ret = ieee80211_start_roc_work(local, sdata, chan, | 
 | 				       duration, cookie, NULL, | 
 | 				       IEEE80211_ROC_TYPE_NORMAL); | 
 | 	mutex_unlock(&local->mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_cancel_roc(struct ieee80211_local *local, | 
 | 				u64 cookie, bool mgmt_tx) | 
 | { | 
 | 	struct ieee80211_roc_work *roc, *tmp, *found = NULL; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	list_for_each_entry_safe(roc, tmp, &local->roc_list, list) { | 
 | 		struct ieee80211_roc_work *dep, *tmp2; | 
 |  | 
 | 		list_for_each_entry_safe(dep, tmp2, &roc->dependents, list) { | 
 | 			if (!mgmt_tx && dep->cookie != cookie) | 
 | 				continue; | 
 | 			else if (mgmt_tx && dep->mgmt_tx_cookie != cookie) | 
 | 				continue; | 
 | 			/* found dependent item -- just remove it */ | 
 | 			list_del(&dep->list); | 
 | 			mutex_unlock(&local->mtx); | 
 |  | 
 | 			ieee80211_roc_notify_destroy(dep, true); | 
 | 			return 0; | 
 | 		} | 
 |  | 
 | 		if (!mgmt_tx && roc->cookie != cookie) | 
 | 			continue; | 
 | 		else if (mgmt_tx && roc->mgmt_tx_cookie != cookie) | 
 | 			continue; | 
 |  | 
 | 		found = roc; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (!found) { | 
 | 		mutex_unlock(&local->mtx); | 
 | 		return -ENOENT; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * We found the item to cancel, so do that. Note that it | 
 | 	 * may have dependents, which we also cancel (and send | 
 | 	 * the expired signal for.) Not doing so would be quite | 
 | 	 * tricky here, but we may need to fix it later. | 
 | 	 */ | 
 |  | 
 | 	if (local->ops->remain_on_channel) { | 
 | 		if (found->started) { | 
 | 			ret = drv_cancel_remain_on_channel(local); | 
 | 			if (WARN_ON_ONCE(ret)) { | 
 | 				mutex_unlock(&local->mtx); | 
 | 				return ret; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		list_del(&found->list); | 
 |  | 
 | 		if (found->started) | 
 | 			ieee80211_start_next_roc(local); | 
 | 		mutex_unlock(&local->mtx); | 
 |  | 
 | 		ieee80211_roc_notify_destroy(found, true); | 
 | 	} else { | 
 | 		/* work may be pending so use it all the time */ | 
 | 		found->abort = true; | 
 | 		ieee80211_queue_delayed_work(&local->hw, &found->work, 0); | 
 |  | 
 | 		mutex_unlock(&local->mtx); | 
 |  | 
 | 		/* work will clean up etc */ | 
 | 		flush_delayed_work(&found->work); | 
 | 		WARN_ON(!found->to_be_freed); | 
 | 		kfree(found); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, | 
 | 					      struct wireless_dev *wdev, | 
 | 					      u64 cookie) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	return ieee80211_cancel_roc(local, cookie, false); | 
 | } | 
 |  | 
 | static int ieee80211_start_radar_detection(struct wiphy *wiphy, | 
 | 					   struct net_device *dev, | 
 | 					   struct cfg80211_chan_def *chandef, | 
 | 					   u32 cac_time_ms) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	if (!list_empty(&local->roc_list) || local->scanning) { | 
 | 		err = -EBUSY; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	/* whatever, but channel contexts should not complain about that one */ | 
 | 	sdata->smps_mode = IEEE80211_SMPS_OFF; | 
 | 	sdata->needed_rx_chains = local->rx_chains; | 
 |  | 
 | 	err = ieee80211_vif_use_channel(sdata, chandef, | 
 | 					IEEE80211_CHANCTX_SHARED); | 
 | 	if (err) | 
 | 		goto out_unlock; | 
 |  | 
 | 	ieee80211_queue_delayed_work(&sdata->local->hw, | 
 | 				     &sdata->dfs_cac_timer_work, | 
 | 				     msecs_to_jiffies(cac_time_ms)); | 
 |  | 
 |  out_unlock: | 
 | 	mutex_unlock(&local->mtx); | 
 | 	return err; | 
 | } | 
 |  | 
 | static struct cfg80211_beacon_data * | 
 | cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) | 
 | { | 
 | 	struct cfg80211_beacon_data *new_beacon; | 
 | 	u8 *pos; | 
 | 	int len; | 
 |  | 
 | 	len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len + | 
 | 	      beacon->proberesp_ies_len + beacon->assocresp_ies_len + | 
 | 	      beacon->probe_resp_len; | 
 |  | 
 | 	new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL); | 
 | 	if (!new_beacon) | 
 | 		return NULL; | 
 |  | 
 | 	pos = (u8 *)(new_beacon + 1); | 
 | 	if (beacon->head_len) { | 
 | 		new_beacon->head_len = beacon->head_len; | 
 | 		new_beacon->head = pos; | 
 | 		memcpy(pos, beacon->head, beacon->head_len); | 
 | 		pos += beacon->head_len; | 
 | 	} | 
 | 	if (beacon->tail_len) { | 
 | 		new_beacon->tail_len = beacon->tail_len; | 
 | 		new_beacon->tail = pos; | 
 | 		memcpy(pos, beacon->tail, beacon->tail_len); | 
 | 		pos += beacon->tail_len; | 
 | 	} | 
 | 	if (beacon->beacon_ies_len) { | 
 | 		new_beacon->beacon_ies_len = beacon->beacon_ies_len; | 
 | 		new_beacon->beacon_ies = pos; | 
 | 		memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len); | 
 | 		pos += beacon->beacon_ies_len; | 
 | 	} | 
 | 	if (beacon->proberesp_ies_len) { | 
 | 		new_beacon->proberesp_ies_len = beacon->proberesp_ies_len; | 
 | 		new_beacon->proberesp_ies = pos; | 
 | 		memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len); | 
 | 		pos += beacon->proberesp_ies_len; | 
 | 	} | 
 | 	if (beacon->assocresp_ies_len) { | 
 | 		new_beacon->assocresp_ies_len = beacon->assocresp_ies_len; | 
 | 		new_beacon->assocresp_ies = pos; | 
 | 		memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len); | 
 | 		pos += beacon->assocresp_ies_len; | 
 | 	} | 
 | 	if (beacon->probe_resp_len) { | 
 | 		new_beacon->probe_resp_len = beacon->probe_resp_len; | 
 | 		beacon->probe_resp = pos; | 
 | 		memcpy(pos, beacon->probe_resp, beacon->probe_resp_len); | 
 | 		pos += beacon->probe_resp_len; | 
 | 	} | 
 |  | 
 | 	return new_beacon; | 
 | } | 
 |  | 
 | void ieee80211_csa_finish(struct ieee80211_vif *vif) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | 
 |  | 
 | 	ieee80211_queue_work(&sdata->local->hw, | 
 | 			     &sdata->csa_finalize_work); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_csa_finish); | 
 |  | 
 | static int ieee80211_set_after_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
 | 					  u32 *changed) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon, | 
 | 					      NULL); | 
 | 		kfree(sdata->u.ap.next_beacon); | 
 | 		sdata->u.ap.next_beacon = NULL; | 
 |  | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		*changed |= err; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		err = ieee80211_ibss_finish_csa(sdata); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		*changed |= err; | 
 | 		break; | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		err = ieee80211_mesh_finish_csa(sdata); | 
 | 		if (err < 0) | 
 | 			return err; | 
 | 		*changed |= err; | 
 | 		break; | 
 | #endif | 
 | 	default: | 
 | 		WARN_ON(1); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	u32 changed = 0; | 
 | 	int err; | 
 |  | 
 | 	sdata_assert_lock(sdata); | 
 | 	lockdep_assert_held(&local->mtx); | 
 | 	lockdep_assert_held(&local->chanctx_mtx); | 
 |  | 
 | 	/* | 
 | 	 * using reservation isn't immediate as it may be deferred until later | 
 | 	 * with multi-vif. once reservation is complete it will re-schedule the | 
 | 	 * work with no reserved_chanctx so verify chandef to check if it | 
 | 	 * completed successfully | 
 | 	 */ | 
 |  | 
 | 	if (sdata->reserved_chanctx) { | 
 | 		/* | 
 | 		 * with multi-vif csa driver may call ieee80211_csa_finish() | 
 | 		 * many times while waiting for other interfaces to use their | 
 | 		 * reservations | 
 | 		 */ | 
 | 		if (sdata->reserved_ready) | 
 | 			return 0; | 
 |  | 
 | 		return ieee80211_vif_use_reserved_context(sdata); | 
 | 	} | 
 |  | 
 | 	if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, | 
 | 					&sdata->csa_chandef)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	sdata->vif.csa_active = false; | 
 |  | 
 | 	err = ieee80211_set_after_csa_beacon(sdata, &changed); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	if (sdata->csa_block_tx) { | 
 | 		ieee80211_wake_vif_queues(local, sdata, | 
 | 					  IEEE80211_QUEUE_STOP_REASON_CSA); | 
 | 		sdata->csa_block_tx = false; | 
 | 	} | 
 |  | 
 | 	err = drv_post_channel_switch(sdata); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	cfg80211_ch_switch_notify(sdata->dev, &sdata->csa_chandef); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void ieee80211_csa_finalize(struct ieee80211_sub_if_data *sdata) | 
 | { | 
 | 	if (__ieee80211_csa_finalize(sdata)) { | 
 | 		sdata_info(sdata, "failed to finalize CSA, disconnecting\n"); | 
 | 		cfg80211_stop_iface(sdata->local->hw.wiphy, &sdata->wdev, | 
 | 				    GFP_KERNEL); | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_csa_finalize_work(struct work_struct *work) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = | 
 | 		container_of(work, struct ieee80211_sub_if_data, | 
 | 			     csa_finalize_work); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	sdata_lock(sdata); | 
 | 	mutex_lock(&local->mtx); | 
 | 	mutex_lock(&local->chanctx_mtx); | 
 |  | 
 | 	/* AP might have been stopped while waiting for the lock. */ | 
 | 	if (!sdata->vif.csa_active) | 
 | 		goto unlock; | 
 |  | 
 | 	if (!ieee80211_sdata_running(sdata)) | 
 | 		goto unlock; | 
 |  | 
 | 	ieee80211_csa_finalize(sdata); | 
 |  | 
 | unlock: | 
 | 	mutex_unlock(&local->chanctx_mtx); | 
 | 	mutex_unlock(&local->mtx); | 
 | 	sdata_unlock(sdata); | 
 | } | 
 |  | 
 | static int ieee80211_set_csa_beacon(struct ieee80211_sub_if_data *sdata, | 
 | 				    struct cfg80211_csa_settings *params, | 
 | 				    u32 *changed) | 
 | { | 
 | 	struct ieee80211_csa_settings csa = {}; | 
 | 	int err; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		sdata->u.ap.next_beacon = | 
 | 			cfg80211_beacon_dup(¶ms->beacon_after); | 
 | 		if (!sdata->u.ap.next_beacon) | 
 | 			return -ENOMEM; | 
 |  | 
 | 		/* | 
 | 		 * With a count of 0, we don't have to wait for any | 
 | 		 * TBTT before switching, so complete the CSA | 
 | 		 * immediately.  In theory, with a count == 1 we | 
 | 		 * should delay the switch until just before the next | 
 | 		 * TBTT, but that would complicate things so we switch | 
 | 		 * immediately too.  If we would delay the switch | 
 | 		 * until the next TBTT, we would have to set the probe | 
 | 		 * response here. | 
 | 		 * | 
 | 		 * TODO: A channel switch with count <= 1 without | 
 | 		 * sending a CSA action frame is kind of useless, | 
 | 		 * because the clients won't know we're changing | 
 | 		 * channels.  The action frame must be implemented | 
 | 		 * either here or in the userspace. | 
 | 		 */ | 
 | 		if (params->count <= 1) | 
 | 			break; | 
 |  | 
 | 		if ((params->n_counter_offsets_beacon > | 
 | 		     IEEE80211_MAX_CSA_COUNTERS_NUM) || | 
 | 		    (params->n_counter_offsets_presp > | 
 | 		     IEEE80211_MAX_CSA_COUNTERS_NUM)) | 
 | 			return -EINVAL; | 
 |  | 
 | 		csa.counter_offsets_beacon = params->counter_offsets_beacon; | 
 | 		csa.counter_offsets_presp = params->counter_offsets_presp; | 
 | 		csa.n_counter_offsets_beacon = params->n_counter_offsets_beacon; | 
 | 		csa.n_counter_offsets_presp = params->n_counter_offsets_presp; | 
 | 		csa.count = params->count; | 
 |  | 
 | 		err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa, &csa); | 
 | 		if (err < 0) { | 
 | 			kfree(sdata->u.ap.next_beacon); | 
 | 			return err; | 
 | 		} | 
 | 		*changed |= err; | 
 |  | 
 | 		break; | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		if (!sdata->vif.bss_conf.ibss_joined) | 
 | 			return -EINVAL; | 
 |  | 
 | 		if (params->chandef.width != sdata->u.ibss.chandef.width) | 
 | 			return -EINVAL; | 
 |  | 
 | 		switch (params->chandef.width) { | 
 | 		case NL80211_CHAN_WIDTH_40: | 
 | 			if (cfg80211_get_chandef_type(¶ms->chandef) != | 
 | 			    cfg80211_get_chandef_type(&sdata->u.ibss.chandef)) | 
 | 				return -EINVAL; | 
 | 		case NL80211_CHAN_WIDTH_5: | 
 | 		case NL80211_CHAN_WIDTH_10: | 
 | 		case NL80211_CHAN_WIDTH_20_NOHT: | 
 | 		case NL80211_CHAN_WIDTH_20: | 
 | 			break; | 
 | 		default: | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		/* changes into another band are not supported */ | 
 | 		if (sdata->u.ibss.chandef.chan->band != | 
 | 		    params->chandef.chan->band) | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* see comments in the NL80211_IFTYPE_AP block */ | 
 | 		if (params->count > 1) { | 
 | 			err = ieee80211_ibss_csa_beacon(sdata, params); | 
 | 			if (err < 0) | 
 | 				return err; | 
 | 			*changed |= err; | 
 | 		} | 
 |  | 
 | 		ieee80211_send_action_csa(sdata, params); | 
 |  | 
 | 		break; | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	case NL80211_IFTYPE_MESH_POINT: { | 
 | 		struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | 
 |  | 
 | 		if (params->chandef.width != sdata->vif.bss_conf.chandef.width) | 
 | 			return -EINVAL; | 
 |  | 
 | 		/* changes into another band are not supported */ | 
 | 		if (sdata->vif.bss_conf.chandef.chan->band != | 
 | 		    params->chandef.chan->band) | 
 | 			return -EINVAL; | 
 |  | 
 | 		if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_NONE) { | 
 | 			ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_INIT; | 
 | 			if (!ifmsh->pre_value) | 
 | 				ifmsh->pre_value = 1; | 
 | 			else | 
 | 				ifmsh->pre_value++; | 
 | 		} | 
 |  | 
 | 		/* see comments in the NL80211_IFTYPE_AP block */ | 
 | 		if (params->count > 1) { | 
 | 			err = ieee80211_mesh_csa_beacon(sdata, params); | 
 | 			if (err < 0) { | 
 | 				ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE; | 
 | 				return err; | 
 | 			} | 
 | 			*changed |= err; | 
 | 		} | 
 |  | 
 | 		if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) | 
 | 			ieee80211_send_action_csa(sdata, params); | 
 |  | 
 | 		break; | 
 | 		} | 
 | #endif | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | __ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | 
 | 			   struct cfg80211_csa_settings *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_channel_switch ch_switch; | 
 | 	struct ieee80211_chanctx_conf *conf; | 
 | 	struct ieee80211_chanctx *chanctx; | 
 | 	u32 changed = 0; | 
 | 	int err; | 
 |  | 
 | 	sdata_assert_lock(sdata); | 
 | 	lockdep_assert_held(&local->mtx); | 
 |  | 
 | 	if (!list_empty(&local->roc_list) || local->scanning) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (sdata->wdev.cac_started) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (cfg80211_chandef_identical(¶ms->chandef, | 
 | 				       &sdata->vif.bss_conf.chandef)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* don't allow another channel switch if one is already active. */ | 
 | 	if (sdata->vif.csa_active) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mutex_lock(&local->chanctx_mtx); | 
 | 	conf = rcu_dereference_protected(sdata->vif.chanctx_conf, | 
 | 					 lockdep_is_held(&local->chanctx_mtx)); | 
 | 	if (!conf) { | 
 | 		err = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	chanctx = container_of(conf, struct ieee80211_chanctx, conf); | 
 | 	if (!chanctx) { | 
 | 		err = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ch_switch.timestamp = 0; | 
 | 	ch_switch.device_timestamp = 0; | 
 | 	ch_switch.block_tx = params->block_tx; | 
 | 	ch_switch.chandef = params->chandef; | 
 | 	ch_switch.count = params->count; | 
 |  | 
 | 	err = drv_pre_channel_switch(sdata, &ch_switch); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = ieee80211_vif_reserve_chanctx(sdata, ¶ms->chandef, | 
 | 					    chanctx->mode, | 
 | 					    params->radar_required); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	/* if reservation is invalid then this will fail */ | 
 | 	err = ieee80211_check_combinations(sdata, NULL, chanctx->mode, 0); | 
 | 	if (err) { | 
 | 		ieee80211_vif_unreserve_chanctx(sdata); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	err = ieee80211_set_csa_beacon(sdata, params, &changed); | 
 | 	if (err) { | 
 | 		ieee80211_vif_unreserve_chanctx(sdata); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	sdata->csa_chandef = params->chandef; | 
 | 	sdata->csa_block_tx = params->block_tx; | 
 | 	sdata->vif.csa_active = true; | 
 |  | 
 | 	if (sdata->csa_block_tx) | 
 | 		ieee80211_stop_vif_queues(local, sdata, | 
 | 					  IEEE80211_QUEUE_STOP_REASON_CSA); | 
 |  | 
 | 	cfg80211_ch_switch_started_notify(sdata->dev, &sdata->csa_chandef, | 
 | 					  params->count); | 
 |  | 
 | 	if (changed) { | 
 | 		ieee80211_bss_info_change_notify(sdata, changed); | 
 | 		drv_channel_switch_beacon(sdata, ¶ms->chandef); | 
 | 	} else { | 
 | 		/* if the beacon didn't change, we can finalize immediately */ | 
 | 		ieee80211_csa_finalize(sdata); | 
 | 	} | 
 |  | 
 | out: | 
 | 	mutex_unlock(&local->chanctx_mtx); | 
 | 	return err; | 
 | } | 
 |  | 
 | int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, | 
 | 			     struct cfg80211_csa_settings *params) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 | 	err = __ieee80211_channel_switch(wiphy, dev, params); | 
 | 	mutex_unlock(&local->mtx); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, | 
 | 			     struct cfg80211_mgmt_tx_params *params, | 
 | 			     u64 *cookie) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff *skb; | 
 | 	struct sta_info *sta; | 
 | 	const struct ieee80211_mgmt *mgmt = (void *)params->buf; | 
 | 	bool need_offchan = false; | 
 | 	u32 flags; | 
 | 	int ret; | 
 | 	u8 *data; | 
 |  | 
 | 	if (params->dont_wait_for_ack) | 
 | 		flags = IEEE80211_TX_CTL_NO_ACK; | 
 | 	else | 
 | 		flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX | | 
 | 			IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 |  | 
 | 	if (params->no_cck) | 
 | 		flags |= IEEE80211_TX_CTL_NO_CCK_RATE; | 
 |  | 
 | 	switch (sdata->vif.type) { | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		if (!sdata->vif.bss_conf.ibss_joined) | 
 | 			need_offchan = true; | 
 | 		/* fall through */ | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	case NL80211_IFTYPE_MESH_POINT: | 
 | 		if (ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 		    !sdata->u.mesh.mesh_id_len) | 
 | 			need_offchan = true; | 
 | 		/* fall through */ | 
 | #endif | 
 | 	case NL80211_IFTYPE_AP: | 
 | 	case NL80211_IFTYPE_AP_VLAN: | 
 | 	case NL80211_IFTYPE_P2P_GO: | 
 | 		if (sdata->vif.type != NL80211_IFTYPE_ADHOC && | 
 | 		    !ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 		    !rcu_access_pointer(sdata->bss->beacon)) | 
 | 			need_offchan = true; | 
 | 		if (!ieee80211_is_action(mgmt->frame_control) || | 
 | 		    mgmt->u.action.category == WLAN_CATEGORY_PUBLIC || | 
 | 		    mgmt->u.action.category == WLAN_CATEGORY_SELF_PROTECTED || | 
 | 		    mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) | 
 | 			break; | 
 | 		rcu_read_lock(); | 
 | 		sta = sta_info_get(sdata, mgmt->da); | 
 | 		rcu_read_unlock(); | 
 | 		if (!sta) | 
 | 			return -ENOLINK; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 	case NL80211_IFTYPE_P2P_CLIENT: | 
 | 		if (!sdata->u.mgd.associated) | 
 | 			need_offchan = true; | 
 | 		break; | 
 | 	case NL80211_IFTYPE_P2P_DEVICE: | 
 | 		need_offchan = true; | 
 | 		break; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	/* configurations requiring offchan cannot work if no channel has been | 
 | 	 * specified | 
 | 	 */ | 
 | 	if (need_offchan && !params->chan) | 
 | 		return -EINVAL; | 
 |  | 
 | 	mutex_lock(&local->mtx); | 
 |  | 
 | 	/* Check if the operating channel is the requested channel */ | 
 | 	if (!need_offchan) { | 
 | 		struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 		rcu_read_lock(); | 
 | 		chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 |  | 
 | 		if (chanctx_conf) { | 
 | 			need_offchan = params->chan && | 
 | 				       (params->chan != | 
 | 					chanctx_conf->def.chan); | 
 | 		} else if (!params->chan) { | 
 | 			ret = -EINVAL; | 
 | 			rcu_read_unlock(); | 
 | 			goto out_unlock; | 
 | 		} else { | 
 | 			need_offchan = true; | 
 | 		} | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 |  | 
 | 	if (need_offchan && !params->offchan) { | 
 | 		ret = -EBUSY; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + params->len); | 
 | 	if (!skb) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out_unlock; | 
 | 	} | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	data = skb_put(skb, params->len); | 
 | 	memcpy(data, params->buf, params->len); | 
 |  | 
 | 	/* Update CSA counters */ | 
 | 	if (sdata->vif.csa_active && | 
 | 	    (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	     sdata->vif.type == NL80211_IFTYPE_MESH_POINT || | 
 | 	     sdata->vif.type == NL80211_IFTYPE_ADHOC) && | 
 | 	    params->n_csa_offsets) { | 
 | 		int i; | 
 | 		struct beacon_data *beacon = NULL; | 
 |  | 
 | 		rcu_read_lock(); | 
 |  | 
 | 		if (sdata->vif.type == NL80211_IFTYPE_AP) | 
 | 			beacon = rcu_dereference(sdata->u.ap.beacon); | 
 | 		else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | 
 | 			beacon = rcu_dereference(sdata->u.ibss.presp); | 
 | 		else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			beacon = rcu_dereference(sdata->u.mesh.beacon); | 
 |  | 
 | 		if (beacon) | 
 | 			for (i = 0; i < params->n_csa_offsets; i++) | 
 | 				data[params->csa_offsets[i]] = | 
 | 					beacon->csa_current_counter; | 
 |  | 
 | 		rcu_read_unlock(); | 
 | 	} | 
 |  | 
 | 	IEEE80211_SKB_CB(skb)->flags = flags; | 
 |  | 
 | 	skb->dev = sdata->dev; | 
 |  | 
 | 	if (!need_offchan) { | 
 | 		*cookie = (unsigned long) skb; | 
 | 		ieee80211_tx_skb(sdata, skb); | 
 | 		ret = 0; | 
 | 		goto out_unlock; | 
 | 	} | 
 |  | 
 | 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | | 
 | 					IEEE80211_TX_INTFL_OFFCHAN_TX_OK; | 
 | 	if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) | 
 | 		IEEE80211_SKB_CB(skb)->hw_queue = | 
 | 			local->hw.offchannel_tx_hw_queue; | 
 |  | 
 | 	/* This will handle all kinds of coalescing and immediate TX */ | 
 | 	ret = ieee80211_start_roc_work(local, sdata, params->chan, | 
 | 				       params->wait, cookie, skb, | 
 | 				       IEEE80211_ROC_TYPE_MGMT_TX); | 
 | 	if (ret) | 
 | 		kfree_skb(skb); | 
 |  out_unlock: | 
 | 	mutex_unlock(&local->mtx); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy, | 
 | 					 struct wireless_dev *wdev, | 
 | 					 u64 cookie) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	return ieee80211_cancel_roc(local, cookie, true); | 
 | } | 
 |  | 
 | static void ieee80211_mgmt_frame_register(struct wiphy *wiphy, | 
 | 					  struct wireless_dev *wdev, | 
 | 					  u16 frame_type, bool reg) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	switch (frame_type) { | 
 | 	case IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ: | 
 | 		if (reg) | 
 | 			local->probe_req_reg++; | 
 | 		else | 
 | 			local->probe_req_reg--; | 
 |  | 
 | 		if (!local->open_count) | 
 | 			break; | 
 |  | 
 | 		ieee80211_queue_work(&local->hw, &local->reconfig_filter); | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	if (local->started) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	return drv_set_antenna(local, tx_ant, rx_ant); | 
 | } | 
 |  | 
 | static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 |  | 
 | 	return drv_get_antenna(local, tx_ant, rx_ant); | 
 | } | 
 |  | 
 | static int ieee80211_set_rekey_data(struct wiphy *wiphy, | 
 | 				    struct net_device *dev, | 
 | 				    struct cfg80211_gtk_rekey_data *data) | 
 | { | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 |  | 
 | 	if (!local->ops->set_rekey_data) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	drv_set_rekey_data(local, sdata, data); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_probe_client(struct wiphy *wiphy, struct net_device *dev, | 
 | 				  const u8 *peer, u64 *cookie) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_qos_hdr *nullfunc; | 
 | 	struct sk_buff *skb; | 
 | 	int size = sizeof(*nullfunc); | 
 | 	__le16 fc; | 
 | 	bool qos; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct sta_info *sta; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 | 	enum ieee80211_band band; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 	if (WARN_ON(!chanctx_conf)) { | 
 | 		rcu_read_unlock(); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	band = chanctx_conf->def.chan->band; | 
 | 	sta = sta_info_get_bss(sdata, peer); | 
 | 	if (sta) { | 
 | 		qos = sta->sta.wme; | 
 | 	} else { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOLINK; | 
 | 	} | 
 |  | 
 | 	if (qos) { | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_QOS_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} else { | 
 | 		size -= 2; | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | 
 | 	if (!skb) { | 
 | 		rcu_read_unlock(); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	skb->dev = dev; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	nullfunc = (void *) skb_put(skb, size); | 
 | 	nullfunc->frame_control = fc; | 
 | 	nullfunc->duration_id = 0; | 
 | 	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | 
 | 	nullfunc->seq_ctrl = 0; | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | | 
 | 		       IEEE80211_TX_INTFL_NL80211_FRAME_TX; | 
 | 	info->band = band; | 
 |  | 
 | 	skb_set_queue_mapping(skb, IEEE80211_AC_VO); | 
 | 	skb->priority = 7; | 
 | 	if (qos) | 
 | 		nullfunc->qos_ctrl = cpu_to_le16(7); | 
 |  | 
 | 	local_bh_disable(); | 
 | 	ieee80211_xmit(sdata, sta, skb); | 
 | 	local_bh_enable(); | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	*cookie = (unsigned long) skb; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_cfg_get_channel(struct wiphy *wiphy, | 
 | 				     struct wireless_dev *wdev, | 
 | 				     struct cfg80211_chan_def *chandef) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 | 	int ret = -ENODATA; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 	if (chanctx_conf) { | 
 | 		*chandef = sdata->vif.bss_conf.chandef; | 
 | 		ret = 0; | 
 | 	} else if (local->open_count > 0 && | 
 | 		   local->open_count == local->monitors && | 
 | 		   sdata->vif.type == NL80211_IFTYPE_MONITOR) { | 
 | 		if (local->use_chanctx) | 
 | 			*chandef = local->monitor_chandef; | 
 | 		else | 
 | 			*chandef = local->_oper_chandef; | 
 | 		ret = 0; | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static void ieee80211_set_wakeup(struct wiphy *wiphy, bool enabled) | 
 | { | 
 | 	drv_set_wakeup(wiphy_priv(wiphy), enabled); | 
 | } | 
 | #endif | 
 |  | 
 | static int ieee80211_set_qos_map(struct wiphy *wiphy, | 
 | 				 struct net_device *dev, | 
 | 				 struct cfg80211_qos_map *qos_map) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct mac80211_qos_map *new_qos_map, *old_qos_map; | 
 |  | 
 | 	if (qos_map) { | 
 | 		new_qos_map = kzalloc(sizeof(*new_qos_map), GFP_KERNEL); | 
 | 		if (!new_qos_map) | 
 | 			return -ENOMEM; | 
 | 		memcpy(&new_qos_map->qos_map, qos_map, sizeof(*qos_map)); | 
 | 	} else { | 
 | 		/* A NULL qos_map was passed to disable QoS mapping */ | 
 | 		new_qos_map = NULL; | 
 | 	} | 
 |  | 
 | 	old_qos_map = sdata_dereference(sdata->qos_map, sdata); | 
 | 	rcu_assign_pointer(sdata->qos_map, new_qos_map); | 
 | 	if (old_qos_map) | 
 | 		kfree_rcu(old_qos_map, rcu_head); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_set_ap_chanwidth(struct wiphy *wiphy, | 
 | 				      struct net_device *dev, | 
 | 				      struct cfg80211_chan_def *chandef) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	int ret; | 
 | 	u32 changed = 0; | 
 |  | 
 | 	ret = ieee80211_vif_change_bandwidth(sdata, chandef, &changed); | 
 | 	if (ret == 0) | 
 | 		ieee80211_bss_info_change_notify(sdata, changed); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ieee80211_add_tx_ts(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       u8 tsid, const u8 *peer, u8 up, | 
 | 			       u16 admitted_time) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
 | 	int ac = ieee802_1d_to_ac[up]; | 
 |  | 
 | 	if (sdata->vif.type != NL80211_IFTYPE_STATION) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (!(sdata->wmm_acm & BIT(up))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (ifmgd->tx_tspec[ac].admitted_time) | 
 | 		return -EBUSY; | 
 |  | 
 | 	if (admitted_time) { | 
 | 		ifmgd->tx_tspec[ac].admitted_time = 32 * admitted_time; | 
 | 		ifmgd->tx_tspec[ac].tsid = tsid; | 
 | 		ifmgd->tx_tspec[ac].up = up; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ieee80211_del_tx_ts(struct wiphy *wiphy, struct net_device *dev, | 
 | 			       u8 tsid, const u8 *peer) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
 | 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; | 
 | 	struct ieee80211_local *local = wiphy_priv(wiphy); | 
 | 	int ac; | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; | 
 |  | 
 | 		/* skip unused entries */ | 
 | 		if (!tx_tspec->admitted_time) | 
 | 			continue; | 
 |  | 
 | 		if (tx_tspec->tsid != tsid) | 
 | 			continue; | 
 |  | 
 | 		/* due to this new packets will be reassigned to non-ACM ACs */ | 
 | 		tx_tspec->up = -1; | 
 |  | 
 | 		/* Make sure that all packets have been sent to avoid to | 
 | 		 * restore the QoS params on packets that are still on the | 
 | 		 * queues. | 
 | 		 */ | 
 | 		synchronize_net(); | 
 | 		ieee80211_flush_queues(local, sdata, false); | 
 |  | 
 | 		/* restore the normal QoS parameters | 
 | 		 * (unconditionally to avoid races) | 
 | 		 */ | 
 | 		tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; | 
 | 		tx_tspec->downgraded = false; | 
 | 		ieee80211_sta_handle_tspec_ac_params(sdata); | 
 |  | 
 | 		/* finally clear all the data */ | 
 | 		memset(tx_tspec, 0, sizeof(*tx_tspec)); | 
 |  | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -ENOENT; | 
 | } | 
 |  | 
 | const struct cfg80211_ops mac80211_config_ops = { | 
 | 	.add_virtual_intf = ieee80211_add_iface, | 
 | 	.del_virtual_intf = ieee80211_del_iface, | 
 | 	.change_virtual_intf = ieee80211_change_iface, | 
 | 	.start_p2p_device = ieee80211_start_p2p_device, | 
 | 	.stop_p2p_device = ieee80211_stop_p2p_device, | 
 | 	.add_key = ieee80211_add_key, | 
 | 	.del_key = ieee80211_del_key, | 
 | 	.get_key = ieee80211_get_key, | 
 | 	.set_default_key = ieee80211_config_default_key, | 
 | 	.set_default_mgmt_key = ieee80211_config_default_mgmt_key, | 
 | 	.start_ap = ieee80211_start_ap, | 
 | 	.change_beacon = ieee80211_change_beacon, | 
 | 	.stop_ap = ieee80211_stop_ap, | 
 | 	.add_station = ieee80211_add_station, | 
 | 	.del_station = ieee80211_del_station, | 
 | 	.change_station = ieee80211_change_station, | 
 | 	.get_station = ieee80211_get_station, | 
 | 	.dump_station = ieee80211_dump_station, | 
 | 	.dump_survey = ieee80211_dump_survey, | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	.add_mpath = ieee80211_add_mpath, | 
 | 	.del_mpath = ieee80211_del_mpath, | 
 | 	.change_mpath = ieee80211_change_mpath, | 
 | 	.get_mpath = ieee80211_get_mpath, | 
 | 	.dump_mpath = ieee80211_dump_mpath, | 
 | 	.get_mpp = ieee80211_get_mpp, | 
 | 	.dump_mpp = ieee80211_dump_mpp, | 
 | 	.update_mesh_config = ieee80211_update_mesh_config, | 
 | 	.get_mesh_config = ieee80211_get_mesh_config, | 
 | 	.join_mesh = ieee80211_join_mesh, | 
 | 	.leave_mesh = ieee80211_leave_mesh, | 
 | #endif | 
 | 	.join_ocb = ieee80211_join_ocb, | 
 | 	.leave_ocb = ieee80211_leave_ocb, | 
 | 	.change_bss = ieee80211_change_bss, | 
 | 	.set_txq_params = ieee80211_set_txq_params, | 
 | 	.set_monitor_channel = ieee80211_set_monitor_channel, | 
 | 	.suspend = ieee80211_suspend, | 
 | 	.resume = ieee80211_resume, | 
 | 	.scan = ieee80211_scan, | 
 | 	.sched_scan_start = ieee80211_sched_scan_start, | 
 | 	.sched_scan_stop = ieee80211_sched_scan_stop, | 
 | 	.auth = ieee80211_auth, | 
 | 	.assoc = ieee80211_assoc, | 
 | 	.deauth = ieee80211_deauth, | 
 | 	.disassoc = ieee80211_disassoc, | 
 | 	.join_ibss = ieee80211_join_ibss, | 
 | 	.leave_ibss = ieee80211_leave_ibss, | 
 | 	.set_mcast_rate = ieee80211_set_mcast_rate, | 
 | 	.set_wiphy_params = ieee80211_set_wiphy_params, | 
 | 	.set_tx_power = ieee80211_set_tx_power, | 
 | 	.get_tx_power = ieee80211_get_tx_power, | 
 | 	.set_wds_peer = ieee80211_set_wds_peer, | 
 | 	.rfkill_poll = ieee80211_rfkill_poll, | 
 | 	CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) | 
 | 	CFG80211_TESTMODE_DUMP(ieee80211_testmode_dump) | 
 | 	.set_power_mgmt = ieee80211_set_power_mgmt, | 
 | 	.set_bitrate_mask = ieee80211_set_bitrate_mask, | 
 | 	.remain_on_channel = ieee80211_remain_on_channel, | 
 | 	.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel, | 
 | 	.mgmt_tx = ieee80211_mgmt_tx, | 
 | 	.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait, | 
 | 	.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config, | 
 | 	.mgmt_frame_register = ieee80211_mgmt_frame_register, | 
 | 	.set_antenna = ieee80211_set_antenna, | 
 | 	.get_antenna = ieee80211_get_antenna, | 
 | 	.set_rekey_data = ieee80211_set_rekey_data, | 
 | 	.tdls_oper = ieee80211_tdls_oper, | 
 | 	.tdls_mgmt = ieee80211_tdls_mgmt, | 
 | 	.tdls_channel_switch = ieee80211_tdls_channel_switch, | 
 | 	.tdls_cancel_channel_switch = ieee80211_tdls_cancel_channel_switch, | 
 | 	.probe_client = ieee80211_probe_client, | 
 | 	.set_noack_map = ieee80211_set_noack_map, | 
 | #ifdef CONFIG_PM | 
 | 	.set_wakeup = ieee80211_set_wakeup, | 
 | #endif | 
 | 	.get_channel = ieee80211_cfg_get_channel, | 
 | 	.start_radar_detection = ieee80211_start_radar_detection, | 
 | 	.channel_switch = ieee80211_channel_switch, | 
 | 	.set_qos_map = ieee80211_set_qos_map, | 
 | 	.set_ap_chanwidth = ieee80211_set_ap_chanwidth, | 
 | 	.add_tx_ts = ieee80211_add_tx_ts, | 
 | 	.del_tx_ts = ieee80211_del_tx_ts, | 
 | }; |