| /* | 
 |  * Copyright 2002-2005, Instant802 Networks, Inc. | 
 |  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz> | 
 |  * Copyright 2013-2014  Intel Mobile Communications GmbH | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/types.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/if_arp.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/rtnetlink.h> | 
 |  | 
 | #include <net/mac80211.h> | 
 | #include "ieee80211_i.h" | 
 | #include "driver-ops.h" | 
 | #include "rate.h" | 
 | #include "sta_info.h" | 
 | #include "debugfs_sta.h" | 
 | #include "mesh.h" | 
 | #include "wme.h" | 
 |  | 
 | /** | 
 |  * DOC: STA information lifetime rules | 
 |  * | 
 |  * STA info structures (&struct sta_info) are managed in a hash table | 
 |  * for faster lookup and a list for iteration. They are managed using | 
 |  * RCU, i.e. access to the list and hash table is protected by RCU. | 
 |  * | 
 |  * Upon allocating a STA info structure with sta_info_alloc(), the caller | 
 |  * owns that structure. It must then insert it into the hash table using | 
 |  * either sta_info_insert() or sta_info_insert_rcu(); only in the latter | 
 |  * case (which acquires an rcu read section but must not be called from | 
 |  * within one) will the pointer still be valid after the call. Note that | 
 |  * the caller may not do much with the STA info before inserting it, in | 
 |  * particular, it may not start any mesh peer link management or add | 
 |  * encryption keys. | 
 |  * | 
 |  * When the insertion fails (sta_info_insert()) returns non-zero), the | 
 |  * structure will have been freed by sta_info_insert()! | 
 |  * | 
 |  * Station entries are added by mac80211 when you establish a link with a | 
 |  * peer. This means different things for the different type of interfaces | 
 |  * we support. For a regular station this mean we add the AP sta when we | 
 |  * receive an association response from the AP. For IBSS this occurs when | 
 |  * get to know about a peer on the same IBSS. For WDS we add the sta for | 
 |  * the peer immediately upon device open. When using AP mode we add stations | 
 |  * for each respective station upon request from userspace through nl80211. | 
 |  * | 
 |  * In order to remove a STA info structure, various sta_info_destroy_*() | 
 |  * calls are available. | 
 |  * | 
 |  * There is no concept of ownership on a STA entry, each structure is | 
 |  * owned by the global hash table/list until it is removed. All users of | 
 |  * the structure need to be RCU protected so that the structure won't be | 
 |  * freed before they are done using it. | 
 |  */ | 
 |  | 
 | static const struct rhashtable_params sta_rht_params = { | 
 | 	.nelem_hint = 3, /* start small */ | 
 | 	.automatic_shrinking = true, | 
 | 	.head_offset = offsetof(struct sta_info, hash_node), | 
 | 	.key_offset = offsetof(struct sta_info, sta.addr), | 
 | 	.key_len = ETH_ALEN, | 
 | 	.hashfn = sta_addr_hash, | 
 | }; | 
 |  | 
 | /* Caller must hold local->sta_mtx */ | 
 | static int sta_info_hash_del(struct ieee80211_local *local, | 
 | 			     struct sta_info *sta) | 
 | { | 
 | 	return rhashtable_remove_fast(&local->sta_hash, &sta->hash_node, | 
 | 				      sta_rht_params); | 
 | } | 
 |  | 
 | static void __cleanup_single_sta(struct sta_info *sta) | 
 | { | 
 | 	int ac, i; | 
 | 	struct tid_ampdu_tx *tid_tx; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ps_data *ps; | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_PS_STA) || | 
 | 	    test_sta_flag(sta, WLAN_STA_PS_DRIVER) || | 
 | 	    test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { | 
 | 		if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 		    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 			ps = &sdata->bss->ps; | 
 | 		else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 			ps = &sdata->u.mesh.ps; | 
 | 		else | 
 | 			return; | 
 |  | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_STA); | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DELIVER); | 
 |  | 
 | 		atomic_dec(&ps->num_sta_ps); | 
 | 	} | 
 |  | 
 | 	if (sta->sta.txq[0]) { | 
 | 		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { | 
 | 			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]); | 
 | 			int n = skb_queue_len(&txqi->queue); | 
 |  | 
 | 			ieee80211_purge_tx_queue(&local->hw, &txqi->queue); | 
 | 			atomic_sub(n, &sdata->txqs_len[txqi->txq.ac]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); | 
 | 		ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]); | 
 | 		ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); | 
 | 	} | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		mesh_sta_cleanup(sta); | 
 |  | 
 | 	cancel_work_sync(&sta->drv_deliver_wk); | 
 |  | 
 | 	/* | 
 | 	 * Destroy aggregation state here. It would be nice to wait for the | 
 | 	 * driver to finish aggregation stop and then clean up, but for now | 
 | 	 * drivers have to handle aggregation stop being requested, followed | 
 | 	 * directly by station destruction. | 
 | 	 */ | 
 | 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) { | 
 | 		kfree(sta->ampdu_mlme.tid_start_tx[i]); | 
 | 		tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]); | 
 | 		if (!tid_tx) | 
 | 			continue; | 
 | 		ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending); | 
 | 		kfree(tid_tx); | 
 | 	} | 
 | } | 
 |  | 
 | static void cleanup_single_sta(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 |  | 
 | 	__cleanup_single_sta(sta); | 
 | 	sta_info_free(local, sta); | 
 | } | 
 |  | 
 | /* protected by RCU */ | 
 | struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, | 
 | 			      const u8 *addr) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct rhash_head *tmp; | 
 | 	const struct bucket_table *tbl; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	tbl = rht_dereference_rcu(local->sta_hash.tbl, &local->sta_hash); | 
 |  | 
 | 	for_each_sta_info(local, tbl, addr, sta, tmp) { | 
 | 		if (sta->sdata == sdata) { | 
 | 			rcu_read_unlock(); | 
 | 			/* this is safe as the caller must already hold | 
 | 			 * another rcu read section or the mutex | 
 | 			 */ | 
 | 			return sta; | 
 | 		} | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Get sta info either from the specified interface | 
 |  * or from one of its vlans | 
 |  */ | 
 | struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, | 
 | 				  const u8 *addr) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	struct rhash_head *tmp; | 
 | 	const struct bucket_table *tbl; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	tbl = rht_dereference_rcu(local->sta_hash.tbl, &local->sta_hash); | 
 |  | 
 | 	for_each_sta_info(local, tbl, addr, sta, tmp) { | 
 | 		if (sta->sdata == sdata || | 
 | 		    (sta->sdata->bss && sta->sdata->bss == sdata->bss)) { | 
 | 			rcu_read_unlock(); | 
 | 			/* this is safe as the caller must already hold | 
 | 			 * another rcu read section or the mutex | 
 | 			 */ | 
 | 			return sta; | 
 | 		} | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, | 
 | 				     int idx) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta; | 
 | 	int i = 0; | 
 |  | 
 | 	list_for_each_entry_rcu(sta, &local->sta_list, list) { | 
 | 		if (sdata != sta->sdata) | 
 | 			continue; | 
 | 		if (i < idx) { | 
 | 			++i; | 
 | 			continue; | 
 | 		} | 
 | 		return sta; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * sta_info_free - free STA | 
 |  * | 
 |  * @local: pointer to the global information | 
 |  * @sta: STA info to free | 
 |  * | 
 |  * This function must undo everything done by sta_info_alloc() | 
 |  * that may happen before sta_info_insert(). It may only be | 
 |  * called when sta_info_insert() has not been attempted (and | 
 |  * if that fails, the station is freed anyway.) | 
 |  */ | 
 | void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) | 
 | { | 
 | 	if (sta->rate_ctrl) | 
 | 		rate_control_free_sta(sta); | 
 |  | 
 | 	sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	if (sta->sta.txq[0]) | 
 | 		kfree(to_txq_info(sta->sta.txq[0])); | 
 | 	kfree(rcu_dereference_raw(sta->sta.rates)); | 
 | 	kfree(sta); | 
 | } | 
 |  | 
 | /* Caller must hold local->sta_mtx */ | 
 | static void sta_info_hash_add(struct ieee80211_local *local, | 
 | 			      struct sta_info *sta) | 
 | { | 
 | 	rhashtable_insert_fast(&local->sta_hash, &sta->hash_node, | 
 | 			       sta_rht_params); | 
 | } | 
 |  | 
 | static void sta_deliver_ps_frames(struct work_struct *wk) | 
 | { | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	sta = container_of(wk, struct sta_info, drv_deliver_wk); | 
 |  | 
 | 	if (sta->dead) | 
 | 		return; | 
 |  | 
 | 	local_bh_disable(); | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_STA)) | 
 | 		ieee80211_sta_ps_deliver_wakeup(sta); | 
 | 	else if (test_and_clear_sta_flag(sta, WLAN_STA_PSPOLL)) | 
 | 		ieee80211_sta_ps_deliver_poll_response(sta); | 
 | 	else if (test_and_clear_sta_flag(sta, WLAN_STA_UAPSD)) | 
 | 		ieee80211_sta_ps_deliver_uapsd(sta); | 
 | 	local_bh_enable(); | 
 | } | 
 |  | 
 | static int sta_prepare_rate_control(struct ieee80211_local *local, | 
 | 				    struct sta_info *sta, gfp_t gfp) | 
 | { | 
 | 	if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) | 
 | 		return 0; | 
 |  | 
 | 	sta->rate_ctrl = local->rate_ctrl; | 
 | 	sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl, | 
 | 						     &sta->sta, gfp); | 
 | 	if (!sta->rate_ctrl_priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, | 
 | 				const u8 *addr, gfp_t gfp) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_hw *hw = &local->hw; | 
 | 	struct sta_info *sta; | 
 | 	struct timespec uptime; | 
 | 	int i; | 
 |  | 
 | 	sta = kzalloc(sizeof(*sta) + hw->sta_data_size, gfp); | 
 | 	if (!sta) | 
 | 		return NULL; | 
 |  | 
 | 	spin_lock_init(&sta->lock); | 
 | 	spin_lock_init(&sta->ps_lock); | 
 | 	INIT_WORK(&sta->drv_deliver_wk, sta_deliver_ps_frames); | 
 | 	INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); | 
 | 	mutex_init(&sta->ampdu_mlme.mtx); | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 	    !sdata->u.mesh.user_mpm) | 
 | 		init_timer(&sta->plink_timer); | 
 | 	sta->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; | 
 | #endif | 
 |  | 
 | 	memcpy(sta->sta.addr, addr, ETH_ALEN); | 
 | 	sta->local = local; | 
 | 	sta->sdata = sdata; | 
 | 	sta->last_rx = jiffies; | 
 |  | 
 | 	sta->sta_state = IEEE80211_STA_NONE; | 
 |  | 
 | 	/* Mark TID as unreserved */ | 
 | 	sta->reserved_tid = IEEE80211_TID_UNRESERVED; | 
 |  | 
 | 	ktime_get_ts(&uptime); | 
 | 	sta->last_connected = uptime.tv_sec; | 
 | 	ewma_init(&sta->avg_signal, 1024, 8); | 
 | 	for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++) | 
 | 		ewma_init(&sta->chain_signal_avg[i], 1024, 8); | 
 |  | 
 | 	if (local->ops->wake_tx_queue) { | 
 | 		void *txq_data; | 
 | 		int size = sizeof(struct txq_info) + | 
 | 			   ALIGN(hw->txq_data_size, sizeof(void *)); | 
 |  | 
 | 		txq_data = kcalloc(ARRAY_SIZE(sta->sta.txq), size, gfp); | 
 | 		if (!txq_data) | 
 | 			goto free; | 
 |  | 
 | 		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { | 
 | 			struct txq_info *txq = txq_data + i * size; | 
 |  | 
 | 			ieee80211_init_tx_queue(sdata, sta, txq, i); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sta_prepare_rate_control(local, sta, gfp)) | 
 | 		goto free_txq; | 
 |  | 
 | 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) { | 
 | 		/* | 
 | 		 * timer_to_tid must be initialized with identity mapping | 
 | 		 * to enable session_timer's data differentiation. See | 
 | 		 * sta_rx_agg_session_timer_expired for usage. | 
 | 		 */ | 
 | 		sta->timer_to_tid[i] = i; | 
 | 	} | 
 | 	for (i = 0; i < IEEE80211_NUM_ACS; i++) { | 
 | 		skb_queue_head_init(&sta->ps_tx_buf[i]); | 
 | 		skb_queue_head_init(&sta->tx_filtered[i]); | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < IEEE80211_NUM_TIDS; i++) | 
 | 		sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); | 
 |  | 
 | 	sta->sta.smps_mode = IEEE80211_SMPS_OFF; | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
 | 		struct ieee80211_supported_band *sband = | 
 | 			hw->wiphy->bands[ieee80211_get_sdata_band(sdata)]; | 
 | 		u8 smps = (sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> | 
 | 				IEEE80211_HT_CAP_SM_PS_SHIFT; | 
 | 		/* | 
 | 		 * Assume that hostapd advertises our caps in the beacon and | 
 | 		 * this is the known_smps_mode for a station that just assciated | 
 | 		 */ | 
 | 		switch (smps) { | 
 | 		case WLAN_HT_SMPS_CONTROL_DISABLED: | 
 | 			sta->known_smps_mode = IEEE80211_SMPS_OFF; | 
 | 			break; | 
 | 		case WLAN_HT_SMPS_CONTROL_STATIC: | 
 | 			sta->known_smps_mode = IEEE80211_SMPS_STATIC; | 
 | 			break; | 
 | 		case WLAN_HT_SMPS_CONTROL_DYNAMIC: | 
 | 			sta->known_smps_mode = IEEE80211_SMPS_DYNAMIC; | 
 | 			break; | 
 | 		default: | 
 | 			WARN_ON(1); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	return sta; | 
 |  | 
 | free_txq: | 
 | 	if (sta->sta.txq[0]) | 
 | 		kfree(to_txq_info(sta->sta.txq[0])); | 
 | free: | 
 | 	kfree(sta); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static int sta_info_insert_check(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 |  | 
 | 	/* | 
 | 	 * Can't be a WARN_ON because it can be triggered through a race: | 
 | 	 * something inserts a STA (on one CPU) without holding the RTNL | 
 | 	 * and another CPU turns off the net device. | 
 | 	 */ | 
 | 	if (unlikely(!ieee80211_sdata_running(sdata))) | 
 | 		return -ENETDOWN; | 
 |  | 
 | 	if (WARN_ON(ether_addr_equal(sta->sta.addr, sdata->vif.addr) || | 
 | 		    is_multicast_ether_addr(sta->sta.addr))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int sta_info_insert_drv_state(struct ieee80211_local *local, | 
 | 				     struct ieee80211_sub_if_data *sdata, | 
 | 				     struct sta_info *sta) | 
 | { | 
 | 	enum ieee80211_sta_state state; | 
 | 	int err = 0; | 
 |  | 
 | 	for (state = IEEE80211_STA_NOTEXIST; state < sta->sta_state; state++) { | 
 | 		err = drv_sta_state(local, sdata, sta, state, state + 1); | 
 | 		if (err) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (!err) { | 
 | 		/* | 
 | 		 * Drivers using legacy sta_add/sta_remove callbacks only | 
 | 		 * get uploaded set to true after sta_add is called. | 
 | 		 */ | 
 | 		if (!local->ops->sta_add) | 
 | 			sta->uploaded = true; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
 | 		sdata_info(sdata, | 
 | 			   "failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n", | 
 | 			   sta->sta.addr, state + 1, err); | 
 | 		err = 0; | 
 | 	} | 
 |  | 
 | 	/* unwind on error */ | 
 | 	for (; state > IEEE80211_STA_NOTEXIST; state--) | 
 | 		WARN_ON(drv_sta_state(local, sdata, sta, state, state - 1)); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /* | 
 |  * should be called with sta_mtx locked | 
 |  * this function replaces the mutex lock | 
 |  * with a RCU lock | 
 |  */ | 
 | static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct station_info sinfo; | 
 | 	int err = 0; | 
 |  | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 |  | 
 | 	/* check if STA exists already */ | 
 | 	if (sta_info_get_bss(sdata, sta->sta.addr)) { | 
 | 		err = -EEXIST; | 
 | 		goto out_err; | 
 | 	} | 
 |  | 
 | 	local->num_sta++; | 
 | 	local->sta_generation++; | 
 | 	smp_mb(); | 
 |  | 
 | 	/* simplify things and don't accept BA sessions yet */ | 
 | 	set_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
 |  | 
 | 	/* make the station visible */ | 
 | 	sta_info_hash_add(local, sta); | 
 |  | 
 | 	list_add_tail_rcu(&sta->list, &local->sta_list); | 
 |  | 
 | 	/* notify driver */ | 
 | 	err = sta_info_insert_drv_state(local, sdata, sta); | 
 | 	if (err) | 
 | 		goto out_remove; | 
 |  | 
 | 	set_sta_flag(sta, WLAN_STA_INSERTED); | 
 | 	/* accept BA sessions now */ | 
 | 	clear_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
 |  | 
 | 	ieee80211_recalc_min_chandef(sdata); | 
 | 	ieee80211_sta_debugfs_add(sta); | 
 | 	rate_control_add_sta_debugfs(sta); | 
 |  | 
 | 	memset(&sinfo, 0, sizeof(sinfo)); | 
 | 	sinfo.filled = 0; | 
 | 	sinfo.generation = local->sta_generation; | 
 | 	cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); | 
 |  | 
 | 	sta_dbg(sdata, "Inserted STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	/* move reference to rcu-protected */ | 
 | 	rcu_read_lock(); | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		mesh_accept_plinks_update(sdata); | 
 |  | 
 | 	return 0; | 
 |  out_remove: | 
 | 	sta_info_hash_del(local, sta); | 
 | 	list_del_rcu(&sta->list); | 
 | 	local->num_sta--; | 
 | 	synchronize_net(); | 
 | 	__cleanup_single_sta(sta); | 
 |  out_err: | 
 | 	mutex_unlock(&local->sta_mtx); | 
 | 	rcu_read_lock(); | 
 | 	return err; | 
 | } | 
 |  | 
 | int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	int err; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	err = sta_info_insert_check(sta); | 
 | 	if (err) { | 
 | 		rcu_read_lock(); | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	err = sta_info_insert_finish(sta); | 
 | 	if (err) | 
 | 		goto out_free; | 
 |  | 
 | 	return 0; | 
 |  out_free: | 
 | 	sta_info_free(local, sta); | 
 | 	return err; | 
 | } | 
 |  | 
 | int sta_info_insert(struct sta_info *sta) | 
 | { | 
 | 	int err = sta_info_insert_rcu(sta); | 
 |  | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static inline void __bss_tim_set(u8 *tim, u16 id) | 
 | { | 
 | 	/* | 
 | 	 * This format has been mandated by the IEEE specifications, | 
 | 	 * so this line may not be changed to use the __set_bit() format. | 
 | 	 */ | 
 | 	tim[id / 8] |= (1 << (id % 8)); | 
 | } | 
 |  | 
 | static inline void __bss_tim_clear(u8 *tim, u16 id) | 
 | { | 
 | 	/* | 
 | 	 * This format has been mandated by the IEEE specifications, | 
 | 	 * so this line may not be changed to use the __clear_bit() format. | 
 | 	 */ | 
 | 	tim[id / 8] &= ~(1 << (id % 8)); | 
 | } | 
 |  | 
 | static inline bool __bss_tim_get(u8 *tim, u16 id) | 
 | { | 
 | 	/* | 
 | 	 * This format has been mandated by the IEEE specifications, | 
 | 	 * so this line may not be changed to use the test_bit() format. | 
 | 	 */ | 
 | 	return tim[id / 8] & (1 << (id % 8)); | 
 | } | 
 |  | 
 | static unsigned long ieee80211_tids_for_ac(int ac) | 
 | { | 
 | 	/* If we ever support TIDs > 7, this obviously needs to be adjusted */ | 
 | 	switch (ac) { | 
 | 	case IEEE80211_AC_VO: | 
 | 		return BIT(6) | BIT(7); | 
 | 	case IEEE80211_AC_VI: | 
 | 		return BIT(4) | BIT(5); | 
 | 	case IEEE80211_AC_BE: | 
 | 		return BIT(0) | BIT(3); | 
 | 	case IEEE80211_AC_BK: | 
 | 		return BIT(1) | BIT(2); | 
 | 	default: | 
 | 		WARN_ON(1); | 
 | 		return 0; | 
 | 	} | 
 | } | 
 |  | 
 | static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ps_data *ps; | 
 | 	bool indicate_tim = false; | 
 | 	u8 ignore_for_tim = sta->sta.uapsd_queues; | 
 | 	int ac; | 
 | 	u16 id; | 
 |  | 
 | 	if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 	    sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
 | 		if (WARN_ON_ONCE(!sta->sdata->bss)) | 
 | 			return; | 
 |  | 
 | 		ps = &sta->sdata->bss->ps; | 
 | 		id = sta->sta.aid; | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 	} else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { | 
 | 		ps = &sta->sdata->u.mesh.ps; | 
 | 		/* TIM map only for 1 <= PLID <= IEEE80211_MAX_AID */ | 
 | 		id = sta->plid % (IEEE80211_MAX_AID + 1); | 
 | #endif | 
 | 	} else { | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* No need to do anything if the driver does all */ | 
 | 	if (local->hw.flags & IEEE80211_HW_AP_LINK_PS) | 
 | 		return; | 
 |  | 
 | 	if (sta->dead) | 
 | 		goto done; | 
 |  | 
 | 	/* | 
 | 	 * If all ACs are delivery-enabled then we should build | 
 | 	 * the TIM bit for all ACs anyway; if only some are then | 
 | 	 * we ignore those and build the TIM bit using only the | 
 | 	 * non-enabled ones. | 
 | 	 */ | 
 | 	if (ignore_for_tim == BIT(IEEE80211_NUM_ACS) - 1) | 
 | 		ignore_for_tim = 0; | 
 |  | 
 | 	if (ignore_pending) | 
 | 		ignore_for_tim = BIT(IEEE80211_NUM_ACS) - 1; | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		unsigned long tids; | 
 |  | 
 | 		if (ignore_for_tim & BIT(ac)) | 
 | 			continue; | 
 |  | 
 | 		indicate_tim |= !skb_queue_empty(&sta->tx_filtered[ac]) || | 
 | 				!skb_queue_empty(&sta->ps_tx_buf[ac]); | 
 | 		if (indicate_tim) | 
 | 			break; | 
 |  | 
 | 		tids = ieee80211_tids_for_ac(ac); | 
 |  | 
 | 		indicate_tim |= | 
 | 			sta->driver_buffered_tids & tids; | 
 | 		indicate_tim |= | 
 | 			sta->txq_buffered_tids & tids; | 
 | 	} | 
 |  | 
 |  done: | 
 | 	spin_lock_bh(&local->tim_lock); | 
 |  | 
 | 	if (indicate_tim == __bss_tim_get(ps->tim, id)) | 
 | 		goto out_unlock; | 
 |  | 
 | 	if (indicate_tim) | 
 | 		__bss_tim_set(ps->tim, id); | 
 | 	else | 
 | 		__bss_tim_clear(ps->tim, id); | 
 |  | 
 | 	if (local->ops->set_tim && !WARN_ON(sta->dead)) { | 
 | 		local->tim_in_locked_section = true; | 
 | 		drv_set_tim(local, &sta->sta, indicate_tim); | 
 | 		local->tim_in_locked_section = false; | 
 | 	} | 
 |  | 
 | out_unlock: | 
 | 	spin_unlock_bh(&local->tim_lock); | 
 | } | 
 |  | 
 | void sta_info_recalc_tim(struct sta_info *sta) | 
 | { | 
 | 	__sta_info_recalc_tim(sta, false); | 
 | } | 
 |  | 
 | static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) | 
 | { | 
 | 	struct ieee80211_tx_info *info; | 
 | 	int timeout; | 
 |  | 
 | 	if (!skb) | 
 | 		return false; | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	/* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */ | 
 | 	timeout = (sta->listen_interval * | 
 | 		   sta->sdata->vif.bss_conf.beacon_int * | 
 | 		   32 / 15625) * HZ; | 
 | 	if (timeout < STA_TX_BUFFER_EXPIRE) | 
 | 		timeout = STA_TX_BUFFER_EXPIRE; | 
 | 	return time_after(jiffies, info->control.jiffies + timeout); | 
 | } | 
 |  | 
 |  | 
 | static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, | 
 | 						struct sta_info *sta, int ac) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct sk_buff *skb; | 
 |  | 
 | 	/* | 
 | 	 * First check for frames that should expire on the filtered | 
 | 	 * queue. Frames here were rejected by the driver and are on | 
 | 	 * a separate queue to avoid reordering with normal PS-buffered | 
 | 	 * frames. They also aren't accounted for right now in the | 
 | 	 * total_ps_buffered counter. | 
 | 	 */ | 
 | 	for (;;) { | 
 | 		spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); | 
 | 		skb = skb_peek(&sta->tx_filtered[ac]); | 
 | 		if (sta_info_buffer_expired(sta, skb)) | 
 | 			skb = __skb_dequeue(&sta->tx_filtered[ac]); | 
 | 		else | 
 | 			skb = NULL; | 
 | 		spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); | 
 |  | 
 | 		/* | 
 | 		 * Frames are queued in order, so if this one | 
 | 		 * hasn't expired yet we can stop testing. If | 
 | 		 * we actually reached the end of the queue we | 
 | 		 * also need to stop, of course. | 
 | 		 */ | 
 | 		if (!skb) | 
 | 			break; | 
 | 		ieee80211_free_txskb(&local->hw, skb); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now also check the normal PS-buffered queue, this will | 
 | 	 * only find something if the filtered queue was emptied | 
 | 	 * since the filtered frames are all before the normal PS | 
 | 	 * buffered frames. | 
 | 	 */ | 
 | 	for (;;) { | 
 | 		spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); | 
 | 		skb = skb_peek(&sta->ps_tx_buf[ac]); | 
 | 		if (sta_info_buffer_expired(sta, skb)) | 
 | 			skb = __skb_dequeue(&sta->ps_tx_buf[ac]); | 
 | 		else | 
 | 			skb = NULL; | 
 | 		spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); | 
 |  | 
 | 		/* | 
 | 		 * frames are queued in order, so if this one | 
 | 		 * hasn't expired yet (or we reached the end of | 
 | 		 * the queue) we can stop testing | 
 | 		 */ | 
 | 		if (!skb) | 
 | 			break; | 
 |  | 
 | 		local->total_ps_buffered--; | 
 | 		ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", | 
 | 		       sta->sta.addr); | 
 | 		ieee80211_free_txskb(&local->hw, skb); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Finally, recalculate the TIM bit for this station -- it might | 
 | 	 * now be clear because the station was too slow to retrieve its | 
 | 	 * frames. | 
 | 	 */ | 
 | 	sta_info_recalc_tim(sta); | 
 |  | 
 | 	/* | 
 | 	 * Return whether there are any frames still buffered, this is | 
 | 	 * used to check whether the cleanup timer still needs to run, | 
 | 	 * if there are no frames we don't need to rearm the timer. | 
 | 	 */ | 
 | 	return !(skb_queue_empty(&sta->ps_tx_buf[ac]) && | 
 | 		 skb_queue_empty(&sta->tx_filtered[ac])); | 
 | } | 
 |  | 
 | static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, | 
 | 					     struct sta_info *sta) | 
 | { | 
 | 	bool have_buffered = false; | 
 | 	int ac; | 
 |  | 
 | 	/* This is only necessary for stations on BSS/MBSS interfaces */ | 
 | 	if (!sta->sdata->bss && | 
 | 	    !ieee80211_vif_is_mesh(&sta->sdata->vif)) | 
 | 		return false; | 
 |  | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | 
 | 		have_buffered |= | 
 | 			sta_info_cleanup_expire_buffered_ac(local, sta, ac); | 
 |  | 
 | 	return have_buffered; | 
 | } | 
 |  | 
 | static int __must_check __sta_info_destroy_part1(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_local *local; | 
 | 	struct ieee80211_sub_if_data *sdata; | 
 | 	int ret; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	if (!sta) | 
 | 		return -ENOENT; | 
 |  | 
 | 	local = sta->local; | 
 | 	sdata = sta->sdata; | 
 |  | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 |  | 
 | 	/* | 
 | 	 * Before removing the station from the driver and | 
 | 	 * rate control, it might still start new aggregation | 
 | 	 * sessions -- block that to make sure the tear-down | 
 | 	 * will be sufficient. | 
 | 	 */ | 
 | 	set_sta_flag(sta, WLAN_STA_BLOCK_BA); | 
 | 	ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); | 
 |  | 
 | 	ret = sta_info_hash_del(local, sta); | 
 | 	if (WARN_ON(ret)) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * for TDLS peers, make sure to return to the base channel before | 
 | 	 * removal. | 
 | 	 */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_TDLS_OFF_CHANNEL)) { | 
 | 		drv_tdls_cancel_channel_switch(local, sdata, &sta->sta); | 
 | 		clear_sta_flag(sta, WLAN_STA_TDLS_OFF_CHANNEL); | 
 | 	} | 
 |  | 
 | 	list_del_rcu(&sta->list); | 
 |  | 
 | 	drv_sta_pre_rcu_remove(local, sta->sdata, sta); | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 	    rcu_access_pointer(sdata->u.vlan.sta) == sta) | 
 | 		RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __sta_info_destroy_part2(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_local *local = sta->local; | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct station_info sinfo = {}; | 
 | 	int ret; | 
 |  | 
 | 	/* | 
 | 	 * NOTE: This assumes at least synchronize_net() was done | 
 | 	 *	 after _part1 and before _part2! | 
 | 	 */ | 
 |  | 
 | 	might_sleep(); | 
 | 	lockdep_assert_held(&local->sta_mtx); | 
 |  | 
 | 	/* now keys can no longer be reached */ | 
 | 	ieee80211_free_sta_keys(local, sta); | 
 |  | 
 | 	/* disable TIM bit - last chance to tell driver */ | 
 | 	__sta_info_recalc_tim(sta, true); | 
 |  | 
 | 	sta->dead = true; | 
 |  | 
 | 	local->num_sta--; | 
 | 	local->sta_generation++; | 
 |  | 
 | 	while (sta->sta_state > IEEE80211_STA_NONE) { | 
 | 		ret = sta_info_move_state(sta, sta->sta_state - 1); | 
 | 		if (ret) { | 
 | 			WARN_ON_ONCE(1); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sta->uploaded) { | 
 | 		ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE, | 
 | 				    IEEE80211_STA_NOTEXIST); | 
 | 		WARN_ON_ONCE(ret != 0); | 
 | 	} | 
 |  | 
 | 	sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr); | 
 |  | 
 | 	sta_set_sinfo(sta, &sinfo); | 
 | 	cfg80211_del_sta_sinfo(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); | 
 |  | 
 | 	rate_control_remove_sta_debugfs(sta); | 
 | 	ieee80211_sta_debugfs_remove(sta); | 
 | 	ieee80211_recalc_min_chandef(sdata); | 
 |  | 
 | 	cleanup_single_sta(sta); | 
 | } | 
 |  | 
 | int __must_check __sta_info_destroy(struct sta_info *sta) | 
 | { | 
 | 	int err = __sta_info_destroy_part1(sta); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	synchronize_net(); | 
 |  | 
 | 	__sta_info_destroy_part2(sta); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sdata->local->sta_mtx); | 
 | 	sta = sta_info_get(sdata, addr); | 
 | 	ret = __sta_info_destroy(sta); | 
 | 	mutex_unlock(&sdata->local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, | 
 | 			      const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&sdata->local->sta_mtx); | 
 | 	sta = sta_info_get_bss(sdata, addr); | 
 | 	ret = __sta_info_destroy(sta); | 
 | 	mutex_unlock(&sdata->local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void sta_info_cleanup(unsigned long data) | 
 | { | 
 | 	struct ieee80211_local *local = (struct ieee80211_local *) data; | 
 | 	struct sta_info *sta; | 
 | 	bool timer_needed = false; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(sta, &local->sta_list, list) | 
 | 		if (sta_info_cleanup_expire_buffered(local, sta)) | 
 | 			timer_needed = true; | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	if (local->quiescing) | 
 | 		return; | 
 |  | 
 | 	if (!timer_needed) | 
 | 		return; | 
 |  | 
 | 	mod_timer(&local->sta_cleanup, | 
 | 		  round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL)); | 
 | } | 
 |  | 
 | u32 sta_addr_hash(const void *key, u32 length, u32 seed) | 
 | { | 
 | 	return jhash(key, ETH_ALEN, seed); | 
 | } | 
 |  | 
 | int sta_info_init(struct ieee80211_local *local) | 
 | { | 
 | 	int err; | 
 |  | 
 | 	err = rhashtable_init(&local->sta_hash, &sta_rht_params); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	spin_lock_init(&local->tim_lock); | 
 | 	mutex_init(&local->sta_mtx); | 
 | 	INIT_LIST_HEAD(&local->sta_list); | 
 |  | 
 | 	setup_timer(&local->sta_cleanup, sta_info_cleanup, | 
 | 		    (unsigned long)local); | 
 | 	return 0; | 
 | } | 
 |  | 
 | void sta_info_stop(struct ieee80211_local *local) | 
 | { | 
 | 	del_timer_sync(&local->sta_cleanup); | 
 | 	rhashtable_destroy(&local->sta_hash); | 
 | } | 
 |  | 
 |  | 
 | int __sta_info_flush(struct ieee80211_sub_if_data *sdata, bool vlans) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta, *tmp; | 
 | 	LIST_HEAD(free_list); | 
 | 	int ret = 0; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	WARN_ON(vlans && sdata->vif.type != NL80211_IFTYPE_AP); | 
 | 	WARN_ON(vlans && !sdata->bss); | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 | 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | 
 | 		if (sdata == sta->sdata || | 
 | 		    (vlans && sdata->bss == sta->sdata->bss)) { | 
 | 			if (!WARN_ON(__sta_info_destroy_part1(sta))) | 
 | 				list_add(&sta->free_list, &free_list); | 
 | 			ret++; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!list_empty(&free_list)) { | 
 | 		synchronize_net(); | 
 | 		list_for_each_entry_safe(sta, tmp, &free_list, free_list) | 
 | 			__sta_info_destroy_part2(sta); | 
 | 	} | 
 | 	mutex_unlock(&local->sta_mtx); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, | 
 | 			  unsigned long exp_time) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sta_info *sta, *tmp; | 
 |  | 
 | 	mutex_lock(&local->sta_mtx); | 
 |  | 
 | 	list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | 
 | 		if (sdata != sta->sdata) | 
 | 			continue; | 
 |  | 
 | 		if (time_after(jiffies, sta->last_rx + exp_time)) { | 
 | 			sta_dbg(sta->sdata, "expiring inactive STA %pM\n", | 
 | 				sta->sta.addr); | 
 |  | 
 | 			if (ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 			    test_sta_flag(sta, WLAN_STA_PS_STA)) | 
 | 				atomic_dec(&sdata->u.mesh.ps.num_sta_ps); | 
 |  | 
 | 			WARN_ON(__sta_info_destroy(sta)); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&local->sta_mtx); | 
 | } | 
 |  | 
 | struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, | 
 | 						   const u8 *addr, | 
 | 						   const u8 *localaddr) | 
 | { | 
 | 	struct ieee80211_local *local = hw_to_local(hw); | 
 | 	struct sta_info *sta; | 
 | 	struct rhash_head *tmp; | 
 | 	const struct bucket_table *tbl; | 
 |  | 
 | 	tbl = rht_dereference_rcu(local->sta_hash.tbl, &local->sta_hash); | 
 |  | 
 | 	/* | 
 | 	 * Just return a random station if localaddr is NULL | 
 | 	 * ... first in list. | 
 | 	 */ | 
 | 	for_each_sta_info(local, tbl, addr, sta, tmp) { | 
 | 		if (localaddr && | 
 | 		    !ether_addr_equal(sta->sdata->vif.addr, localaddr)) | 
 | 			continue; | 
 | 		if (!sta->uploaded) | 
 | 			return NULL; | 
 | 		return &sta->sta; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 | EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_ifaddr); | 
 |  | 
 | struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, | 
 | 					 const u8 *addr) | 
 | { | 
 | 	struct sta_info *sta; | 
 |  | 
 | 	if (!vif) | 
 | 		return NULL; | 
 |  | 
 | 	sta = sta_info_get_bss(vif_to_sdata(vif), addr); | 
 | 	if (!sta) | 
 | 		return NULL; | 
 |  | 
 | 	if (!sta->uploaded) | 
 | 		return NULL; | 
 |  | 
 | 	return &sta->sta; | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_find_sta); | 
 |  | 
 | /* powersave support code */ | 
 | void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct sk_buff_head pending; | 
 | 	int filtered = 0, buffered = 0, ac, i; | 
 | 	unsigned long flags; | 
 | 	struct ps_data *ps; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
 | 		sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, | 
 | 				     u.ap); | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_AP) | 
 | 		ps = &sdata->bss->ps; | 
 | 	else if (ieee80211_vif_is_mesh(&sdata->vif)) | 
 | 		ps = &sdata->u.mesh.ps; | 
 | 	else | 
 | 		return; | 
 |  | 
 | 	clear_sta_flag(sta, WLAN_STA_SP); | 
 |  | 
 | 	BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1); | 
 | 	sta->driver_buffered_tids = 0; | 
 | 	sta->txq_buffered_tids = 0; | 
 |  | 
 | 	if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS)) | 
 | 		drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta); | 
 |  | 
 | 	if (sta->sta.txq[0]) { | 
 | 		for (i = 0; i < ARRAY_SIZE(sta->sta.txq); i++) { | 
 | 			struct txq_info *txqi = to_txq_info(sta->sta.txq[i]); | 
 |  | 
 | 			if (!skb_queue_len(&txqi->queue)) | 
 | 				continue; | 
 |  | 
 | 			drv_wake_tx_queue(local, txqi); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	skb_queue_head_init(&pending); | 
 |  | 
 | 	/* sync with ieee80211_tx_h_unicast_ps_buf */ | 
 | 	spin_lock(&sta->ps_lock); | 
 | 	/* Send all buffered frames to the station */ | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		int count = skb_queue_len(&pending), tmp; | 
 |  | 
 | 		spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); | 
 | 		skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending); | 
 | 		spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); | 
 | 		tmp = skb_queue_len(&pending); | 
 | 		filtered += tmp - count; | 
 | 		count = tmp; | 
 |  | 
 | 		spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); | 
 | 		skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending); | 
 | 		spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); | 
 | 		tmp = skb_queue_len(&pending); | 
 | 		buffered += tmp - count; | 
 | 	} | 
 |  | 
 | 	ieee80211_add_pending_skbs(local, &pending); | 
 |  | 
 | 	/* now we're no longer in the deliver code */ | 
 | 	clear_sta_flag(sta, WLAN_STA_PS_DELIVER); | 
 |  | 
 | 	/* The station might have polled and then woken up before we responded, | 
 | 	 * so clear these flags now to avoid them sticking around. | 
 | 	 */ | 
 | 	clear_sta_flag(sta, WLAN_STA_PSPOLL); | 
 | 	clear_sta_flag(sta, WLAN_STA_UAPSD); | 
 | 	spin_unlock(&sta->ps_lock); | 
 |  | 
 | 	atomic_dec(&ps->num_sta_ps); | 
 |  | 
 | 	/* This station just woke up and isn't aware of our SMPS state */ | 
 | 	if (!ieee80211_vif_is_mesh(&sdata->vif) && | 
 | 	    !ieee80211_smps_is_restrictive(sta->known_smps_mode, | 
 | 					   sdata->smps_mode) && | 
 | 	    sta->known_smps_mode != sdata->bss->req_smps && | 
 | 	    sta_info_tx_streams(sta) != 1) { | 
 | 		ht_dbg(sdata, | 
 | 		       "%pM just woke up and MIMO capable - update SMPS\n", | 
 | 		       sta->sta.addr); | 
 | 		ieee80211_send_smps_action(sdata, sdata->bss->req_smps, | 
 | 					   sta->sta.addr, | 
 | 					   sdata->vif.bss_conf.bssid); | 
 | 	} | 
 |  | 
 | 	local->total_ps_buffered -= buffered; | 
 |  | 
 | 	sta_info_recalc_tim(sta); | 
 |  | 
 | 	ps_dbg(sdata, | 
 | 	       "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n", | 
 | 	       sta->sta.addr, sta->sta.aid, filtered, buffered); | 
 | } | 
 |  | 
 | static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, | 
 | 					 struct sta_info *sta, int tid, | 
 | 					 enum ieee80211_frame_release_type reason, | 
 | 					 bool call_driver) | 
 | { | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct ieee80211_qos_hdr *nullfunc; | 
 | 	struct sk_buff *skb; | 
 | 	int size = sizeof(*nullfunc); | 
 | 	__le16 fc; | 
 | 	bool qos = sta->sta.wme; | 
 | 	struct ieee80211_tx_info *info; | 
 | 	struct ieee80211_chanctx_conf *chanctx_conf; | 
 |  | 
 | 	if (qos) { | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_QOS_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} else { | 
 | 		size -= 2; | 
 | 		fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | 
 | 				 IEEE80211_STYPE_NULLFUNC | | 
 | 				 IEEE80211_FCTL_FROMDS); | 
 | 	} | 
 |  | 
 | 	skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | 
 | 	if (!skb) | 
 | 		return; | 
 |  | 
 | 	skb_reserve(skb, local->hw.extra_tx_headroom); | 
 |  | 
 | 	nullfunc = (void *) skb_put(skb, size); | 
 | 	nullfunc->frame_control = fc; | 
 | 	nullfunc->duration_id = 0; | 
 | 	memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | 
 | 	memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | 
 | 	nullfunc->seq_ctrl = 0; | 
 |  | 
 | 	skb->priority = tid; | 
 | 	skb_set_queue_mapping(skb, ieee802_1d_to_ac[tid]); | 
 | 	if (qos) { | 
 | 		nullfunc->qos_ctrl = cpu_to_le16(tid); | 
 |  | 
 | 		if (reason == IEEE80211_FRAME_RELEASE_UAPSD) | 
 | 			nullfunc->qos_ctrl |= | 
 | 				cpu_to_le16(IEEE80211_QOS_CTL_EOSP); | 
 | 	} | 
 |  | 
 | 	info = IEEE80211_SKB_CB(skb); | 
 |  | 
 | 	/* | 
 | 	 * Tell TX path to send this frame even though the | 
 | 	 * STA may still remain is PS mode after this frame | 
 | 	 * exchange. Also set EOSP to indicate this packet | 
 | 	 * ends the poll/service period. | 
 | 	 */ | 
 | 	info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | | 
 | 		       IEEE80211_TX_STATUS_EOSP | | 
 | 		       IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 |  | 
 | 	info->control.flags |= IEEE80211_TX_CTRL_PS_RESPONSE; | 
 |  | 
 | 	if (call_driver) | 
 | 		drv_allow_buffered_frames(local, sta, BIT(tid), 1, | 
 | 					  reason, false); | 
 |  | 
 | 	skb->dev = sdata->dev; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | 
 | 	if (WARN_ON(!chanctx_conf)) { | 
 | 		rcu_read_unlock(); | 
 | 		kfree_skb(skb); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	info->band = chanctx_conf->def.chan->band; | 
 | 	ieee80211_xmit(sdata, sta, skb); | 
 | 	rcu_read_unlock(); | 
 | } | 
 |  | 
 | static int find_highest_prio_tid(unsigned long tids) | 
 | { | 
 | 	/* lower 3 TIDs aren't ordered perfectly */ | 
 | 	if (tids & 0xF8) | 
 | 		return fls(tids) - 1; | 
 | 	/* TID 0 is BE just like TID 3 */ | 
 | 	if (tids & BIT(0)) | 
 | 		return 0; | 
 | 	return fls(tids) - 1; | 
 | } | 
 |  | 
 | static void | 
 | ieee80211_sta_ps_deliver_response(struct sta_info *sta, | 
 | 				  int n_frames, u8 ignored_acs, | 
 | 				  enum ieee80211_frame_release_type reason) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	bool more_data = false; | 
 | 	int ac; | 
 | 	unsigned long driver_release_tids = 0; | 
 | 	struct sk_buff_head frames; | 
 |  | 
 | 	/* Service or PS-Poll period starts */ | 
 | 	set_sta_flag(sta, WLAN_STA_SP); | 
 |  | 
 | 	__skb_queue_head_init(&frames); | 
 |  | 
 | 	/* Get response frame(s) and more data bit for the last one. */ | 
 | 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
 | 		unsigned long tids; | 
 |  | 
 | 		if (ignored_acs & BIT(ac)) | 
 | 			continue; | 
 |  | 
 | 		tids = ieee80211_tids_for_ac(ac); | 
 |  | 
 | 		/* if we already have frames from software, then we can't also | 
 | 		 * release from hardware queues | 
 | 		 */ | 
 | 		if (skb_queue_empty(&frames)) { | 
 | 			driver_release_tids |= sta->driver_buffered_tids & tids; | 
 | 			driver_release_tids |= sta->txq_buffered_tids & tids; | 
 | 		} | 
 |  | 
 | 		if (driver_release_tids) { | 
 | 			/* If the driver has data on more than one TID then | 
 | 			 * certainly there's more data if we release just a | 
 | 			 * single frame now (from a single TID). This will | 
 | 			 * only happen for PS-Poll. | 
 | 			 */ | 
 | 			if (reason == IEEE80211_FRAME_RELEASE_PSPOLL && | 
 | 			    hweight16(driver_release_tids) > 1) { | 
 | 				more_data = true; | 
 | 				driver_release_tids = | 
 | 					BIT(find_highest_prio_tid( | 
 | 						driver_release_tids)); | 
 | 				break; | 
 | 			} | 
 | 		} else { | 
 | 			struct sk_buff *skb; | 
 |  | 
 | 			while (n_frames > 0) { | 
 | 				skb = skb_dequeue(&sta->tx_filtered[ac]); | 
 | 				if (!skb) { | 
 | 					skb = skb_dequeue( | 
 | 						&sta->ps_tx_buf[ac]); | 
 | 					if (skb) | 
 | 						local->total_ps_buffered--; | 
 | 				} | 
 | 				if (!skb) | 
 | 					break; | 
 | 				n_frames--; | 
 | 				__skb_queue_tail(&frames, skb); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* If we have more frames buffered on this AC, then set the | 
 | 		 * more-data bit and abort the loop since we can't send more | 
 | 		 * data from other ACs before the buffered frames from this. | 
 | 		 */ | 
 | 		if (!skb_queue_empty(&sta->tx_filtered[ac]) || | 
 | 		    !skb_queue_empty(&sta->ps_tx_buf[ac])) { | 
 | 			more_data = true; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (skb_queue_empty(&frames) && !driver_release_tids) { | 
 | 		int tid; | 
 |  | 
 | 		/* | 
 | 		 * For PS-Poll, this can only happen due to a race condition | 
 | 		 * when we set the TIM bit and the station notices it, but | 
 | 		 * before it can poll for the frame we expire it. | 
 | 		 * | 
 | 		 * For uAPSD, this is said in the standard (11.2.1.5 h): | 
 | 		 *	At each unscheduled SP for a non-AP STA, the AP shall | 
 | 		 *	attempt to transmit at least one MSDU or MMPDU, but no | 
 | 		 *	more than the value specified in the Max SP Length field | 
 | 		 *	in the QoS Capability element from delivery-enabled ACs, | 
 | 		 *	that are destined for the non-AP STA. | 
 | 		 * | 
 | 		 * Since we have no other MSDU/MMPDU, transmit a QoS null frame. | 
 | 		 */ | 
 |  | 
 | 		/* This will evaluate to 1, 3, 5 or 7. */ | 
 | 		tid = 7 - ((ffs(~ignored_acs) - 1) << 1); | 
 |  | 
 | 		ieee80211_send_null_response(sdata, sta, tid, reason, true); | 
 | 	} else if (!driver_release_tids) { | 
 | 		struct sk_buff_head pending; | 
 | 		struct sk_buff *skb; | 
 | 		int num = 0; | 
 | 		u16 tids = 0; | 
 | 		bool need_null = false; | 
 |  | 
 | 		skb_queue_head_init(&pending); | 
 |  | 
 | 		while ((skb = __skb_dequeue(&frames))) { | 
 | 			struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
 | 			struct ieee80211_hdr *hdr = (void *) skb->data; | 
 | 			u8 *qoshdr = NULL; | 
 |  | 
 | 			num++; | 
 |  | 
 | 			/* | 
 | 			 * Tell TX path to send this frame even though the | 
 | 			 * STA may still remain is PS mode after this frame | 
 | 			 * exchange. | 
 | 			 */ | 
 | 			info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; | 
 | 			info->control.flags |= IEEE80211_TX_CTRL_PS_RESPONSE; | 
 |  | 
 | 			/* | 
 | 			 * Use MoreData flag to indicate whether there are | 
 | 			 * more buffered frames for this STA | 
 | 			 */ | 
 | 			if (more_data || !skb_queue_empty(&frames)) | 
 | 				hdr->frame_control |= | 
 | 					cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
 | 			else | 
 | 				hdr->frame_control &= | 
 | 					cpu_to_le16(~IEEE80211_FCTL_MOREDATA); | 
 |  | 
 | 			if (ieee80211_is_data_qos(hdr->frame_control) || | 
 | 			    ieee80211_is_qos_nullfunc(hdr->frame_control)) | 
 | 				qoshdr = ieee80211_get_qos_ctl(hdr); | 
 |  | 
 | 			tids |= BIT(skb->priority); | 
 |  | 
 | 			__skb_queue_tail(&pending, skb); | 
 |  | 
 | 			/* end service period after last frame or add one */ | 
 | 			if (!skb_queue_empty(&frames)) | 
 | 				continue; | 
 |  | 
 | 			if (reason != IEEE80211_FRAME_RELEASE_UAPSD) { | 
 | 				/* for PS-Poll, there's only one frame */ | 
 | 				info->flags |= IEEE80211_TX_STATUS_EOSP | | 
 | 					       IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			/* For uAPSD, things are a bit more complicated. If the | 
 | 			 * last frame has a QoS header (i.e. is a QoS-data or | 
 | 			 * QoS-nulldata frame) then just set the EOSP bit there | 
 | 			 * and be done. | 
 | 			 * If the frame doesn't have a QoS header (which means | 
 | 			 * it should be a bufferable MMPDU) then we can't set | 
 | 			 * the EOSP bit in the QoS header; add a QoS-nulldata | 
 | 			 * frame to the list to send it after the MMPDU. | 
 | 			 * | 
 | 			 * Note that this code is only in the mac80211-release | 
 | 			 * code path, we assume that the driver will not buffer | 
 | 			 * anything but QoS-data frames, or if it does, will | 
 | 			 * create the QoS-nulldata frame by itself if needed. | 
 | 			 * | 
 | 			 * Cf. 802.11-2012 10.2.1.10 (c). | 
 | 			 */ | 
 | 			if (qoshdr) { | 
 | 				*qoshdr |= IEEE80211_QOS_CTL_EOSP; | 
 |  | 
 | 				info->flags |= IEEE80211_TX_STATUS_EOSP | | 
 | 					       IEEE80211_TX_CTL_REQ_TX_STATUS; | 
 | 			} else { | 
 | 				/* The standard isn't completely clear on this | 
 | 				 * as it says the more-data bit should be set | 
 | 				 * if there are more BUs. The QoS-Null frame | 
 | 				 * we're about to send isn't buffered yet, we | 
 | 				 * only create it below, but let's pretend it | 
 | 				 * was buffered just in case some clients only | 
 | 				 * expect more-data=0 when eosp=1. | 
 | 				 */ | 
 | 				hdr->frame_control |= | 
 | 					cpu_to_le16(IEEE80211_FCTL_MOREDATA); | 
 | 				need_null = true; | 
 | 				num++; | 
 | 			} | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		drv_allow_buffered_frames(local, sta, tids, num, | 
 | 					  reason, more_data); | 
 |  | 
 | 		ieee80211_add_pending_skbs(local, &pending); | 
 |  | 
 | 		if (need_null) | 
 | 			ieee80211_send_null_response( | 
 | 				sdata, sta, find_highest_prio_tid(tids), | 
 | 				reason, false); | 
 |  | 
 | 		sta_info_recalc_tim(sta); | 
 | 	} else { | 
 | 		unsigned long tids = sta->txq_buffered_tids & driver_release_tids; | 
 | 		int tid; | 
 |  | 
 | 		/* | 
 | 		 * We need to release a frame that is buffered somewhere in the | 
 | 		 * driver ... it'll have to handle that. | 
 | 		 * Note that the driver also has to check the number of frames | 
 | 		 * on the TIDs we're releasing from - if there are more than | 
 | 		 * n_frames it has to set the more-data bit (if we didn't ask | 
 | 		 * it to set it anyway due to other buffered frames); if there | 
 | 		 * are fewer than n_frames it has to make sure to adjust that | 
 | 		 * to allow the service period to end properly. | 
 | 		 */ | 
 | 		drv_release_buffered_frames(local, sta, driver_release_tids, | 
 | 					    n_frames, reason, more_data); | 
 |  | 
 | 		/* | 
 | 		 * Note that we don't recalculate the TIM bit here as it would | 
 | 		 * most likely have no effect at all unless the driver told us | 
 | 		 * that the TID(s) became empty before returning here from the | 
 | 		 * release function. | 
 | 		 * Either way, however, when the driver tells us that the TID(s) | 
 | 		 * became empty or we find that a txq became empty, we'll do the | 
 | 		 * TIM recalculation. | 
 | 		 */ | 
 |  | 
 | 		if (!sta->sta.txq[0]) | 
 | 			return; | 
 |  | 
 | 		for (tid = 0; tid < ARRAY_SIZE(sta->sta.txq); tid++) { | 
 | 			struct txq_info *txqi = to_txq_info(sta->sta.txq[tid]); | 
 |  | 
 | 			if (!(tids & BIT(tid)) || skb_queue_len(&txqi->queue)) | 
 | 				continue; | 
 |  | 
 | 			sta_info_recalc_tim(sta); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta) | 
 | { | 
 | 	u8 ignore_for_response = sta->sta.uapsd_queues; | 
 |  | 
 | 	/* | 
 | 	 * If all ACs are delivery-enabled then we should reply | 
 | 	 * from any of them, if only some are enabled we reply | 
 | 	 * only from the non-enabled ones. | 
 | 	 */ | 
 | 	if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1) | 
 | 		ignore_for_response = 0; | 
 |  | 
 | 	ieee80211_sta_ps_deliver_response(sta, 1, ignore_for_response, | 
 | 					  IEEE80211_FRAME_RELEASE_PSPOLL); | 
 | } | 
 |  | 
 | void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta) | 
 | { | 
 | 	int n_frames = sta->sta.max_sp; | 
 | 	u8 delivery_enabled = sta->sta.uapsd_queues; | 
 |  | 
 | 	/* | 
 | 	 * If we ever grow support for TSPEC this might happen if | 
 | 	 * the TSPEC update from hostapd comes in between a trigger | 
 | 	 * frame setting WLAN_STA_UAPSD in the RX path and this | 
 | 	 * actually getting called. | 
 | 	 */ | 
 | 	if (!delivery_enabled) | 
 | 		return; | 
 |  | 
 | 	switch (sta->sta.max_sp) { | 
 | 	case 1: | 
 | 		n_frames = 2; | 
 | 		break; | 
 | 	case 2: | 
 | 		n_frames = 4; | 
 | 		break; | 
 | 	case 3: | 
 | 		n_frames = 6; | 
 | 		break; | 
 | 	case 0: | 
 | 		/* XXX: what is a good value? */ | 
 | 		n_frames = 128; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	ieee80211_sta_ps_deliver_response(sta, n_frames, ~delivery_enabled, | 
 | 					  IEEE80211_FRAME_RELEASE_UAPSD); | 
 | } | 
 |  | 
 | void ieee80211_sta_block_awake(struct ieee80211_hw *hw, | 
 | 			       struct ieee80211_sta *pubsta, bool block) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	trace_api_sta_block_awake(sta->local, pubsta, block); | 
 |  | 
 | 	if (block) { | 
 | 		set_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_DRIVER)) | 
 | 		return; | 
 |  | 
 | 	if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { | 
 | 		set_sta_flag(sta, WLAN_STA_PS_DELIVER); | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 		ieee80211_queue_work(hw, &sta->drv_deliver_wk); | 
 | 	} else if (test_sta_flag(sta, WLAN_STA_PSPOLL) || | 
 | 		   test_sta_flag(sta, WLAN_STA_UAPSD)) { | 
 | 		/* must be asleep in this case */ | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 		ieee80211_queue_work(hw, &sta->drv_deliver_wk); | 
 | 	} else { | 
 | 		clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_block_awake); | 
 |  | 
 | void ieee80211_sta_eosp(struct ieee80211_sta *pubsta) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 | 	struct ieee80211_local *local = sta->local; | 
 |  | 
 | 	trace_api_eosp(local, pubsta); | 
 |  | 
 | 	clear_sta_flag(sta, WLAN_STA_SP); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_eosp); | 
 |  | 
 | void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta, | 
 | 				u8 tid, bool buffered) | 
 | { | 
 | 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | 
 |  | 
 | 	if (WARN_ON(tid >= IEEE80211_NUM_TIDS)) | 
 | 		return; | 
 |  | 
 | 	trace_api_sta_set_buffered(sta->local, pubsta, tid, buffered); | 
 |  | 
 | 	if (buffered) | 
 | 		set_bit(tid, &sta->driver_buffered_tids); | 
 | 	else | 
 | 		clear_bit(tid, &sta->driver_buffered_tids); | 
 |  | 
 | 	sta_info_recalc_tim(sta); | 
 | } | 
 | EXPORT_SYMBOL(ieee80211_sta_set_buffered); | 
 |  | 
 | int sta_info_move_state(struct sta_info *sta, | 
 | 			enum ieee80211_sta_state new_state) | 
 | { | 
 | 	might_sleep(); | 
 |  | 
 | 	if (sta->sta_state == new_state) | 
 | 		return 0; | 
 |  | 
 | 	/* check allowed transitions first */ | 
 |  | 
 | 	switch (new_state) { | 
 | 	case IEEE80211_STA_NONE: | 
 | 		if (sta->sta_state != IEEE80211_STA_AUTH) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTH: | 
 | 		if (sta->sta_state != IEEE80211_STA_NONE && | 
 | 		    sta->sta_state != IEEE80211_STA_ASSOC) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_ASSOC: | 
 | 		if (sta->sta_state != IEEE80211_STA_AUTH && | 
 | 		    sta->sta_state != IEEE80211_STA_AUTHORIZED) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTHORIZED: | 
 | 		if (sta->sta_state != IEEE80211_STA_ASSOC) | 
 | 			return -EINVAL; | 
 | 		break; | 
 | 	default: | 
 | 		WARN(1, "invalid state %d", new_state); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	sta_dbg(sta->sdata, "moving STA %pM to state %d\n", | 
 | 		sta->sta.addr, new_state); | 
 |  | 
 | 	/* | 
 | 	 * notify the driver before the actual changes so it can | 
 | 	 * fail the transition | 
 | 	 */ | 
 | 	if (test_sta_flag(sta, WLAN_STA_INSERTED)) { | 
 | 		int err = drv_sta_state(sta->local, sta->sdata, sta, | 
 | 					sta->sta_state, new_state); | 
 | 		if (err) | 
 | 			return err; | 
 | 	} | 
 |  | 
 | 	/* reflect the change in all state variables */ | 
 |  | 
 | 	switch (new_state) { | 
 | 	case IEEE80211_STA_NONE: | 
 | 		if (sta->sta_state == IEEE80211_STA_AUTH) | 
 | 			clear_bit(WLAN_STA_AUTH, &sta->_flags); | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTH: | 
 | 		if (sta->sta_state == IEEE80211_STA_NONE) | 
 | 			set_bit(WLAN_STA_AUTH, &sta->_flags); | 
 | 		else if (sta->sta_state == IEEE80211_STA_ASSOC) | 
 | 			clear_bit(WLAN_STA_ASSOC, &sta->_flags); | 
 | 		break; | 
 | 	case IEEE80211_STA_ASSOC: | 
 | 		if (sta->sta_state == IEEE80211_STA_AUTH) { | 
 | 			set_bit(WLAN_STA_ASSOC, &sta->_flags); | 
 | 		} else if (sta->sta_state == IEEE80211_STA_AUTHORIZED) { | 
 | 			if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 			    (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 			     !sta->sdata->u.vlan.sta)) | 
 | 				atomic_dec(&sta->sdata->bss->num_mcast_sta); | 
 | 			clear_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | 
 | 		} | 
 | 		break; | 
 | 	case IEEE80211_STA_AUTHORIZED: | 
 | 		if (sta->sta_state == IEEE80211_STA_ASSOC) { | 
 | 			if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | 
 | 			    (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | 
 | 			     !sta->sdata->u.vlan.sta)) | 
 | 				atomic_inc(&sta->sdata->bss->num_mcast_sta); | 
 | 			set_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | 
 | 		} | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	sta->sta_state = new_state; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | u8 sta_info_tx_streams(struct sta_info *sta) | 
 | { | 
 | 	struct ieee80211_sta_ht_cap *ht_cap = &sta->sta.ht_cap; | 
 | 	u8 rx_streams; | 
 |  | 
 | 	if (!sta->sta.ht_cap.ht_supported) | 
 | 		return 1; | 
 |  | 
 | 	if (sta->sta.vht_cap.vht_supported) { | 
 | 		int i; | 
 | 		u16 tx_mcs_map = | 
 | 			le16_to_cpu(sta->sta.vht_cap.vht_mcs.tx_mcs_map); | 
 |  | 
 | 		for (i = 7; i >= 0; i--) | 
 | 			if ((tx_mcs_map & (0x3 << (i * 2))) != | 
 | 			    IEEE80211_VHT_MCS_NOT_SUPPORTED) | 
 | 				return i + 1; | 
 | 	} | 
 |  | 
 | 	if (ht_cap->mcs.rx_mask[3]) | 
 | 		rx_streams = 4; | 
 | 	else if (ht_cap->mcs.rx_mask[2]) | 
 | 		rx_streams = 3; | 
 | 	else if (ht_cap->mcs.rx_mask[1]) | 
 | 		rx_streams = 2; | 
 | 	else | 
 | 		rx_streams = 1; | 
 |  | 
 | 	if (!(ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_RX_DIFF)) | 
 | 		return rx_streams; | 
 |  | 
 | 	return ((ht_cap->mcs.tx_params & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK) | 
 | 			>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1; | 
 | } | 
 |  | 
 | void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) | 
 | { | 
 | 	struct ieee80211_sub_if_data *sdata = sta->sdata; | 
 | 	struct ieee80211_local *local = sdata->local; | 
 | 	struct rate_control_ref *ref = NULL; | 
 | 	struct timespec uptime; | 
 | 	u32 thr = 0; | 
 | 	int i, ac; | 
 |  | 
 | 	if (test_sta_flag(sta, WLAN_STA_RATE_CONTROL)) | 
 | 		ref = local->rate_ctrl; | 
 |  | 
 | 	sinfo->generation = sdata->local->sta_generation; | 
 |  | 
 | 	/* do before driver, so beacon filtering drivers have a | 
 | 	 * chance to e.g. just add the number of filtered beacons | 
 | 	 * (or just modify the value entirely, of course) | 
 | 	 */ | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
 | 		sinfo->rx_beacon = sdata->u.mgd.count_beacon_signal; | 
 |  | 
 | 	drv_sta_statistics(local, sdata, &sta->sta, sinfo); | 
 |  | 
 | 	sinfo->filled |= BIT(NL80211_STA_INFO_INACTIVE_TIME) | | 
 | 			 BIT(NL80211_STA_INFO_STA_FLAGS) | | 
 | 			 BIT(NL80211_STA_INFO_BSS_PARAM) | | 
 | 			 BIT(NL80211_STA_INFO_CONNECTED_TIME) | | 
 | 			 BIT(NL80211_STA_INFO_RX_DROP_MISC) | | 
 | 			 BIT(NL80211_STA_INFO_BEACON_LOSS); | 
 |  | 
 | 	ktime_get_ts(&uptime); | 
 | 	sinfo->connected_time = uptime.tv_sec - sta->last_connected; | 
 | 	sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx); | 
 |  | 
 | 	if (!(sinfo->filled & (BIT(NL80211_STA_INFO_TX_BYTES64) | | 
 | 			       BIT(NL80211_STA_INFO_TX_BYTES)))) { | 
 | 		sinfo->tx_bytes = 0; | 
 | 		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | 
 | 			sinfo->tx_bytes += sta->tx_bytes[ac]; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_TX_BYTES64); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_PACKETS))) { | 
 | 		sinfo->tx_packets = 0; | 
 | 		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | 
 | 			sinfo->tx_packets += sta->tx_packets[ac]; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_TX_PACKETS); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & (BIT(NL80211_STA_INFO_RX_BYTES64) | | 
 | 			       BIT(NL80211_STA_INFO_RX_BYTES)))) { | 
 | 		sinfo->rx_bytes = sta->rx_bytes; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_RX_BYTES64); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_RX_PACKETS))) { | 
 | 		sinfo->rx_packets = sta->rx_packets; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_RX_PACKETS); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_RETRIES))) { | 
 | 		sinfo->tx_retries = sta->tx_retry_count; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_TX_RETRIES); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_FAILED))) { | 
 | 		sinfo->tx_failed = sta->tx_retry_failed; | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_TX_FAILED); | 
 | 	} | 
 |  | 
 | 	sinfo->rx_dropped_misc = sta->rx_dropped; | 
 | 	sinfo->beacon_loss_count = sta->beacon_loss_count; | 
 |  | 
 | 	if (sdata->vif.type == NL80211_IFTYPE_STATION && | 
 | 	    !(sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)) { | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_BEACON_RX) | | 
 | 				 BIT(NL80211_STA_INFO_BEACON_SIGNAL_AVG); | 
 | 		sinfo->rx_beacon_signal_avg = ieee80211_ave_rssi(&sdata->vif); | 
 | 	} | 
 |  | 
 | 	if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) || | 
 | 	    (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) { | 
 | 		if (!(sinfo->filled & BIT(NL80211_STA_INFO_SIGNAL))) { | 
 | 			sinfo->signal = (s8)sta->last_signal; | 
 | 			sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL); | 
 | 		} | 
 |  | 
 | 		if (!(sinfo->filled & BIT(NL80211_STA_INFO_SIGNAL_AVG))) { | 
 | 			sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal); | 
 | 			sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL_AVG); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (sta->chains && | 
 | 	    !(sinfo->filled & (BIT(NL80211_STA_INFO_CHAIN_SIGNAL) | | 
 | 			       BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG)))) { | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_CHAIN_SIGNAL) | | 
 | 				 BIT(NL80211_STA_INFO_CHAIN_SIGNAL_AVG); | 
 |  | 
 | 		sinfo->chains = sta->chains; | 
 | 		for (i = 0; i < ARRAY_SIZE(sinfo->chain_signal); i++) { | 
 | 			sinfo->chain_signal[i] = sta->chain_signal_last[i]; | 
 | 			sinfo->chain_signal_avg[i] = | 
 | 				(s8) -ewma_read(&sta->chain_signal_avg[i]); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_TX_BITRATE))) { | 
 | 		sta_set_rate_info_tx(sta, &sta->last_tx_rate, &sinfo->txrate); | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_TX_BITRATE); | 
 | 	} | 
 |  | 
 | 	if (!(sinfo->filled & BIT(NL80211_STA_INFO_RX_BITRATE))) { | 
 | 		sta_set_rate_info_rx(sta, &sinfo->rxrate); | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_RX_BITRATE); | 
 | 	} | 
 |  | 
 | 	sinfo->filled |= BIT(NL80211_STA_INFO_TID_STATS); | 
 | 	for (i = 0; i < IEEE80211_NUM_TIDS + 1; i++) { | 
 | 		struct cfg80211_tid_stats *tidstats = &sinfo->pertid[i]; | 
 |  | 
 | 		if (!(tidstats->filled & BIT(NL80211_TID_STATS_RX_MSDU))) { | 
 | 			tidstats->filled |= BIT(NL80211_TID_STATS_RX_MSDU); | 
 | 			tidstats->rx_msdu = sta->rx_msdu[i]; | 
 | 		} | 
 |  | 
 | 		if (!(tidstats->filled & BIT(NL80211_TID_STATS_TX_MSDU))) { | 
 | 			tidstats->filled |= BIT(NL80211_TID_STATS_TX_MSDU); | 
 | 			tidstats->tx_msdu = sta->tx_msdu[i]; | 
 | 		} | 
 |  | 
 | 		if (!(tidstats->filled & | 
 | 				BIT(NL80211_TID_STATS_TX_MSDU_RETRIES)) && | 
 | 		    local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { | 
 | 			tidstats->filled |= | 
 | 				BIT(NL80211_TID_STATS_TX_MSDU_RETRIES); | 
 | 			tidstats->tx_msdu_retries = sta->tx_msdu_retries[i]; | 
 | 		} | 
 |  | 
 | 		if (!(tidstats->filled & | 
 | 				BIT(NL80211_TID_STATS_TX_MSDU_FAILED)) && | 
 | 		    local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) { | 
 | 			tidstats->filled |= | 
 | 				BIT(NL80211_TID_STATS_TX_MSDU_FAILED); | 
 | 			tidstats->tx_msdu_failed = sta->tx_msdu_failed[i]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ieee80211_vif_is_mesh(&sdata->vif)) { | 
 | #ifdef CONFIG_MAC80211_MESH | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_LLID) | | 
 | 				 BIT(NL80211_STA_INFO_PLID) | | 
 | 				 BIT(NL80211_STA_INFO_PLINK_STATE) | | 
 | 				 BIT(NL80211_STA_INFO_LOCAL_PM) | | 
 | 				 BIT(NL80211_STA_INFO_PEER_PM) | | 
 | 				 BIT(NL80211_STA_INFO_NONPEER_PM); | 
 |  | 
 | 		sinfo->llid = sta->llid; | 
 | 		sinfo->plid = sta->plid; | 
 | 		sinfo->plink_state = sta->plink_state; | 
 | 		if (test_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN)) { | 
 | 			sinfo->filled |= BIT(NL80211_STA_INFO_T_OFFSET); | 
 | 			sinfo->t_offset = sta->t_offset; | 
 | 		} | 
 | 		sinfo->local_pm = sta->local_pm; | 
 | 		sinfo->peer_pm = sta->peer_pm; | 
 | 		sinfo->nonpeer_pm = sta->nonpeer_pm; | 
 | #endif | 
 | 	} | 
 |  | 
 | 	sinfo->bss_param.flags = 0; | 
 | 	if (sdata->vif.bss_conf.use_cts_prot) | 
 | 		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_CTS_PROT; | 
 | 	if (sdata->vif.bss_conf.use_short_preamble) | 
 | 		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_PREAMBLE; | 
 | 	if (sdata->vif.bss_conf.use_short_slot) | 
 | 		sinfo->bss_param.flags |= BSS_PARAM_FLAGS_SHORT_SLOT_TIME; | 
 | 	sinfo->bss_param.dtim_period = sdata->vif.bss_conf.dtim_period; | 
 | 	sinfo->bss_param.beacon_interval = sdata->vif.bss_conf.beacon_int; | 
 |  | 
 | 	sinfo->sta_flags.set = 0; | 
 | 	sinfo->sta_flags.mask = BIT(NL80211_STA_FLAG_AUTHORIZED) | | 
 | 				BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) | | 
 | 				BIT(NL80211_STA_FLAG_WME) | | 
 | 				BIT(NL80211_STA_FLAG_MFP) | | 
 | 				BIT(NL80211_STA_FLAG_AUTHENTICATED) | | 
 | 				BIT(NL80211_STA_FLAG_ASSOCIATED) | | 
 | 				BIT(NL80211_STA_FLAG_TDLS_PEER); | 
 | 	if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); | 
 | 	if (test_sta_flag(sta, WLAN_STA_SHORT_PREAMBLE)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_SHORT_PREAMBLE); | 
 | 	if (sta->sta.wme) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_WME); | 
 | 	if (test_sta_flag(sta, WLAN_STA_MFP)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); | 
 | 	if (test_sta_flag(sta, WLAN_STA_AUTH)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); | 
 | 	if (test_sta_flag(sta, WLAN_STA_ASSOC)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); | 
 | 	if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) | 
 | 		sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); | 
 |  | 
 | 	/* check if the driver has a SW RC implementation */ | 
 | 	if (ref && ref->ops->get_expected_throughput) | 
 | 		thr = ref->ops->get_expected_throughput(sta->rate_ctrl_priv); | 
 | 	else | 
 | 		thr = drv_get_expected_throughput(local, &sta->sta); | 
 |  | 
 | 	if (thr != 0) { | 
 | 		sinfo->filled |= BIT(NL80211_STA_INFO_EXPECTED_THROUGHPUT); | 
 | 		sinfo->expected_throughput = thr; | 
 | 	} | 
 | } |