linux/drivers/media/video/gspca/gspca.h

#ifndef GSPCAV2_H
#define GSPCAV2_H

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/usb.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/mutex.h>

/* compilation option */
#define GSPCA_DEBUG 1

#ifdef GSPCA_DEBUG
/* GSPCA our debug messages */
extern int gspca_debug;
#define PDEBUG(level, fmt, args...) \
	do {\
		if (gspca_debug & (level)) \
			printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args); \
	} while (0)
#define D_ERR  0x01
#define D_PROBE 0x02
#define D_CONF 0x04
#define D_STREAM 0x08
#define D_FRAM 0x10
#define D_PACK 0x20
#define D_USBI 0x40
#define D_USBO 0x80
#define D_V4L2 0x0100
#else
#define PDEBUG(level, fmt, args...)
#endif
#undef err
#define err(fmt, args...) \
	printk(KERN_ERR MODULE_NAME ": " fmt "\n", ## args)
#undef info
#define info(fmt, args...) \
	printk(KERN_INFO MODULE_NAME ": " fmt "\n", ## args)
#undef warn
#define warn(fmt, args...) \
	printk(KERN_WARNING MODULE_NAME ": " fmt "\n", ## args)

#define GSPCA_MAX_FRAMES 16	/* maximum number of video frame buffers */
/* image transfers */
#define MAX_NURBS 4		/* max number of URBs */


/* used to list framerates supported by a camera mode (resolution) */
struct framerates {
	const u8 *rates;
	int nrates;
};

/* control definition */
struct gspca_ctrl {
	s16 val;	/* current value */
	s16 def;	/* default value */
	s16 min, max;	/* minimum and maximum values */
};

/* device information - set at probe time */
struct cam {
	const struct v4l2_pix_format *cam_mode;	/* size nmodes */
	const struct framerates *mode_framerates; /* must have size nmode,
						   * just like cam_mode */
	struct gspca_ctrl *ctrls;	/* control table - size nctrls */
					/* may be NULL */
	u32 bulk_size;		/* buffer size when image transfer by bulk */
	u32 input_flags;	/* value for ENUM_INPUT status flags */
	u8 nmodes;		/* size of cam_mode */
	u8 no_urb_create;	/* don't create transfer URBs */
	u8 bulk_nurbs;		/* number of URBs in bulk mode
				 * - cannot be > MAX_NURBS
				 * - when 0 and bulk_size != 0 means
				 *   1 URB and submit done by subdriver */
	u8 bulk;		/* image transfer by 0:isoc / 1:bulk */
	u8 npkt;		/* number of packets in an ISOC message
				 * 0 is the default value: 32 packets */
	u8 reverse_alts;	/* Alt settings are in high to low order */
};

struct gspca_dev;
struct gspca_frame;

/* subdriver operations */
typedef int (*cam_op) (struct gspca_dev *);
typedef void (*cam_v_op) (struct gspca_dev *);
typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
typedef int (*cam_jpg_op) (struct gspca_dev *,
				struct v4l2_jpegcompression *);
typedef int (*cam_reg_op) (struct gspca_dev *,
				struct v4l2_dbg_register *);
typedef int (*cam_ident_op) (struct gspca_dev *,
				struct v4l2_dbg_chip_ident *);
typedef int (*cam_streamparm_op) (struct gspca_dev *,
				  struct v4l2_streamparm *);
typedef int (*cam_qmnu_op) (struct gspca_dev *,
			struct v4l2_querymenu *);
typedef void (*cam_pkt_op) (struct gspca_dev *gspca_dev,
				u8 *data,
				int len);
typedef int (*cam_int_pkt_op) (struct gspca_dev *gspca_dev,
				u8 *data,
				int len);

struct ctrl {
	struct v4l2_queryctrl qctrl;
	int (*set)(struct gspca_dev *, __s32);
	int (*get)(struct gspca_dev *, __s32 *);
	cam_v_op set_control;
};

/* subdriver description */
struct sd_desc {
/* information */
	const char *name;	/* sub-driver name */
/* controls */
	const struct ctrl *ctrls;	/* static control definition */
	int nctrls;
/* mandatory operations */
	cam_cf_op config;	/* called on probe */
	cam_op init;		/* called on probe and resume */
	cam_op start;		/* called on stream on after URBs creation */
	cam_pkt_op pkt_scan;
/* optional operations */
	cam_op isoc_init;	/* called on stream on before getting the EP */
	cam_op isoc_nego;	/* called when URB submit failed with NOSPC */
	cam_v_op stopN;		/* called on stream off - main alt */
	cam_v_op stop0;		/* called on stream off & disconnect - alt 0 */
	cam_v_op dq_callback;	/* called when a frame has been dequeued */
	cam_jpg_op get_jcomp;
	cam_jpg_op set_jcomp;
	cam_qmnu_op querymenu;
	cam_streamparm_op get_streamparm;
	cam_streamparm_op set_streamparm;
#ifdef CONFIG_VIDEO_ADV_DEBUG
	cam_reg_op set_register;
	cam_reg_op get_register;
#endif
	cam_ident_op get_chip_ident;
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
	cam_int_pkt_op int_pkt_scan;
	/* other_input makes the gspca core create gspca_dev->input even when
	   int_pkt_scan is NULL, for cams with non interrupt driven buttons */
	u8 other_input;
#endif
};

/* packet types when moving from iso buf to frame buf */
enum gspca_packet_type {
	DISCARD_PACKET,
	FIRST_PACKET,
	INTER_PACKET,
	LAST_PACKET
};

struct gspca_frame {
	__u8 *data;			/* frame buffer */
	int vma_use_count;
	struct v4l2_buffer v4l2_buf;
};

struct gspca_dev {
	struct video_device vdev;	/* !! must be the first item */
	struct module *module;		/* subdriver handling the device */
	struct usb_device *dev;
	struct file *capt_file;		/* file doing video capture */
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
	struct input_dev *input_dev;
	char phys[64];			/* physical device path */
#endif

	struct cam cam;				/* device information */
	const struct sd_desc *sd_desc;		/* subdriver description */
	unsigned ctrl_dis;		/* disabled controls (bit map) */
	unsigned ctrl_inac;		/* inactive controls (bit map) */

#define USB_BUF_SZ 64
	__u8 *usb_buf;				/* buffer for USB exchanges */
	struct urb *urb[MAX_NURBS];
#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
	struct urb *int_urb;
#endif

	__u8 *frbuf;				/* buffer for nframes */
	struct gspca_frame frame[GSPCA_MAX_FRAMES];
	u8 *image;				/* image beeing filled */
	__u32 frsz;				/* frame size */
	u32 image_len;				/* current length of image */
	atomic_t fr_q;				/* next frame to queue */
	atomic_t fr_i;				/* frame being filled */
	signed char fr_queue[GSPCA_MAX_FRAMES];	/* frame queue */
	char nframes;				/* number of frames */
	u8 fr_o;				/* next frame to dequeue */
	__u8 last_packet_type;
	__s8 empty_packet;		/* if (-1) don't check empty packets */
	__u8 streaming;

	__u8 curr_mode;			/* current camera mode */
	__u32 pixfmt;			/* current mode parameters */
	__u16 width;
	__u16 height;
	__u32 sequence;			/* frame sequence number */

	wait_queue_head_t wq;		/* wait queue */
	struct mutex usb_lock;		/* usb exchange protection */
	struct mutex read_lock;		/* read protection */
	struct mutex queue_lock;	/* ISOC queue protection */
	int usb_err;			/* USB error - protected by usb_lock */
	u16 pkt_size;			/* ISOC packet size */
#ifdef CONFIG_PM
	char frozen;			/* suspend - resume */
#endif
	char users;			/* number of opens */
	char present;			/* device connected */
	char nbufread;			/* number of buffers for read() */
	char memory;			/* memory type (V4L2_MEMORY_xxx) */
	__u8 iface;			/* USB interface number */
	__u8 alt;			/* USB alternate setting */
	__u8 nbalt;			/* number of USB alternate settings */
	u8 audio;			/* presence of audio device */
};

int gspca_dev_probe(struct usb_interface *intf,
		const struct usb_device_id *id,
		const struct sd_desc *sd_desc,
		int dev_size,
		struct module *module);
int gspca_dev_probe2(struct usb_interface *intf,
		const struct usb_device_id *id,
		const struct sd_desc *sd_desc,
		int dev_size,
		struct module *module);
void gspca_disconnect(struct usb_interface *intf);
void gspca_frame_add(struct gspca_dev *gspca_dev,
			enum gspca_packet_type packet_type,
			const u8 *data,
			int len);
#ifdef CONFIG_PM
int gspca_suspend(struct usb_interface *intf, pm_message_t message);
int gspca_resume(struct usb_interface *intf);
#endif
int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
	int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
#endif /* GSPCAV2_H */