| *** The StrongARM version of the CerfBoard/Cube has been discontinued *** | |
| The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board | |
| that measures approximately 2" square. It includes an Ethernet | |
| controller, an RS232-compatible serial port, a USB function port, and | |
| one CompactFlash+ slot on the back. Pictures can be found at the | |
| Intrinsyc website, http://www.intrinsyc.com. | |
| This document describes the support in the Linux kernel for the | |
| Intrinsyc CerfBoard. | |
| Supported in this version: | |
| - CompactFlash+ slot (select PCMCIA in General Setup and any options | |
| that may be required) | |
| - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in | |
| Network Devices) | |
| - Serial ports with a serial console (hardcoded to 38400 8N1) | |
| In order to get this kernel onto your Cerf, you need a server that runs | |
| both BOOTP and TFTP. Detailed instructions should have come with your | |
| evaluation kit on how to use the bootloader. This series of commands | |
| will suffice: | |
| make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig | |
| make ARCH=arm CROSS_COMPILE=arm-linux- zImage | |
| make ARCH=arm CROSS_COMPILE=arm-linux- modules | |
| cp arch/arm/boot/zImage <TFTP directory> | |
| support@intrinsyc.com |