blob: 0f32116e1550bcdbf5a19c52b10dc9b4df30af7c [file] [log] [blame]
/*
* Copyright (c) 2012 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef FWIL_TYPES_H_
#define FWIL_TYPES_H_
#include <linux/if_ether.h>
#define BRCMF_FIL_ACTION_FRAME_SIZE 1800
/* ARP Offload feature flags for arp_ol iovar */
#define BRCMF_ARP_OL_AGENT 0x00000001
#define BRCMF_ARP_OL_SNOOP 0x00000002
#define BRCMF_ARP_OL_HOST_AUTO_REPLY 0x00000004
#define BRCMF_ARP_OL_PEER_AUTO_REPLY 0x00000008
#define BRCMF_BSS_INFO_VERSION 109 /* curr ver of brcmf_bss_info_le struct */
#define BRCMF_BSS_FROM_BEACON 0x01 /* bss_info derived from beacon */
#define BRCMF_BSS_FROM_CACHE 0x02
#define BRCMF_BSS_RSSI_ON_CHANNEL 0x04
#define BRCMF_STA_WME 0x00000002 /* WMM association */
#define BRCMF_STA_AUTHE 0x00000008 /* Authenticated */
#define BRCMF_STA_ASSOC 0x00000010 /* Associated */
#define BRCMF_STA_AUTHO 0x00000020 /* Authorized */
#define BRCMF_STA_SCBSTATS 0x00004000 /* Per STA debug stats */
/* size of brcmf_scan_params not including variable length array */
#define BRCMF_SCAN_PARAMS_FIXED_SIZE 64
/* masks for channel and ssid count */
#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
#define BRCMF_WSEC_MAX_PSK_LEN 32
#define BRCMF_WSEC_PASSPHRASE BIT(0)
/* primary (ie tx) key */
#define BRCMF_PRIMARY_KEY (1 << 1)
#define DOT11_BSSTYPE_ANY 2
#define BRCMF_ESCAN_REQ_VERSION 1
#define BRCMF_MAXRATES_IN_SET 16 /* max # of rates in rateset */
/* OBSS Coex Auto/On/Off */
#define BRCMF_OBSS_COEX_AUTO (-1)
#define BRCMF_OBSS_COEX_OFF 0
#define BRCMF_OBSS_COEX_ON 1
/* WOWL bits */
/* Wakeup on Magic packet: */
#define BRCMF_WOWL_MAGIC (1 << 0)
/* Wakeup on Netpattern */
#define BRCMF_WOWL_NET (1 << 1)
/* Wakeup on loss-of-link due to Disassoc/Deauth: */
#define BRCMF_WOWL_DIS (1 << 2)
/* Wakeup on retrograde TSF: */
#define BRCMF_WOWL_RETR (1 << 3)
/* Wakeup on loss of beacon: */
#define BRCMF_WOWL_BCN (1 << 4)
/* Wakeup after test: */
#define BRCMF_WOWL_TST (1 << 5)
/* Wakeup after PTK refresh: */
#define BRCMF_WOWL_M1 (1 << 6)
/* Wakeup after receipt of EAP-Identity Req: */
#define BRCMF_WOWL_EAPID (1 << 7)
/* Wakeind via PME(0) or GPIO(1): */
#define BRCMF_WOWL_PME_GPIO (1 << 8)
/* need tkip phase 1 key to be updated by the driver: */
#define BRCMF_WOWL_NEEDTKIP1 (1 << 9)
/* enable wakeup if GTK fails: */
#define BRCMF_WOWL_GTK_FAILURE (1 << 10)
/* support extended magic packets: */
#define BRCMF_WOWL_EXTMAGPAT (1 << 11)
/* support ARP/NS/keepalive offloading: */
#define BRCMF_WOWL_ARPOFFLOAD (1 << 12)
/* read protocol version for EAPOL frames: */
#define BRCMF_WOWL_WPA2 (1 << 13)
/* If the bit is set, use key rotaton: */
#define BRCMF_WOWL_KEYROT (1 << 14)
/* If the bit is set, frm received was bcast frame: */
#define BRCMF_WOWL_BCAST (1 << 15)
/* If the bit is set, scan offload is enabled: */
#define BRCMF_WOWL_SCANOL (1 << 16)
/* Wakeup on tcpkeep alive timeout: */
#define BRCMF_WOWL_TCPKEEP_TIME (1 << 17)
/* Wakeup on mDNS Conflict Resolution: */
#define BRCMF_WOWL_MDNS_CONFLICT (1 << 18)
/* Wakeup on mDNS Service Connect: */
#define BRCMF_WOWL_MDNS_SERVICE (1 << 19)
/* tcp keepalive got data: */
#define BRCMF_WOWL_TCPKEEP_DATA (1 << 20)
/* Firmware died in wowl mode: */
#define BRCMF_WOWL_FW_HALT (1 << 21)
/* Enable detection of radio button changes: */
#define BRCMF_WOWL_ENAB_HWRADIO (1 << 22)
/* Offloads detected MIC failure(s): */
#define BRCMF_WOWL_MIC_FAIL (1 << 23)
/* Wakeup in Unassociated state (Net/Magic Pattern): */
#define BRCMF_WOWL_UNASSOC (1 << 24)
/* Wakeup if received matched secured pattern: */
#define BRCMF_WOWL_SECURE (1 << 25)
/* Wakeup on finding preferred network */
#define BRCMF_WOWL_PFN_FOUND (1 << 27)
/* Wakeup on receiving pairwise key EAP packets: */
#define WIPHY_WOWL_EAP_PK (1 << 28)
/* Link Down indication in WoWL mode: */
#define BRCMF_WOWL_LINKDOWN (1 << 31)
#define BRCMF_WOWL_MAXPATTERNS 8
#define BRCMF_WOWL_MAXPATTERNSIZE 128
#define BRCMF_COUNTRY_BUF_SZ 4
#define BRCMF_ANT_MAX 4
#define BRCMF_MAX_ASSOCLIST 128
#define BRCMF_TXBF_SU_BFE_CAP BIT(0)
#define BRCMF_TXBF_MU_BFE_CAP BIT(1)
#define BRCMF_TXBF_SU_BFR_CAP BIT(0)
#define BRCMF_TXBF_MU_BFR_CAP BIT(1)
#define BRCMF_MAXPMKID 16 /* max # PMKID cache entries */
#define BRCMF_NUMCHANNELS 64
#define BRCMF_PFN_MACADDR_CFG_VER 1
#define BRCMF_PFN_MAC_OUI_ONLY BIT(0)
#define BRCMF_PFN_SET_MAC_UNASSOC BIT(1)
#define BRCMF_MCSSET_LEN 16
#define BRCMF_RSN_KCK_LENGTH 16
#define BRCMF_RSN_KEK_LENGTH 16
#define BRCMF_RSN_REPLAY_LEN 8
#define BRCMF_MFP_NONE 0
#define BRCMF_MFP_CAPABLE 1
#define BRCMF_MFP_REQUIRED 2
/* MAX_CHUNK_LEN is the amount of the clm file we send in each ioctl.
* It is relatively small because dongles (FW) have a small maximum size
* input payload restriction for ioctls.
*/
#define MAX_CHUNK_LEN 1400
#define DLOAD_HANDLER_VER 1 /* Downloader version */
#define DLOAD_FLAG_VER_MASK 0xf000 /* Downloader version mask */
#define DLOAD_FLAG_VER_SHIFT 12 /* Downloader version shift */
#define DL_CRC_NOT_INUSE 0x0001
#define DL_BEGIN 0x0002
#define DL_END 0x0004
#define DL_TYPE_CLM 2
/* join preference types for join_pref iovar */
enum brcmf_join_pref_types {
BRCMF_JOIN_PREF_RSSI = 1,
BRCMF_JOIN_PREF_WPA,
BRCMF_JOIN_PREF_BAND,
BRCMF_JOIN_PREF_RSSI_DELTA,
};
enum brcmf_fil_p2p_if_types {
BRCMF_FIL_P2P_IF_CLIENT,
BRCMF_FIL_P2P_IF_GO,
BRCMF_FIL_P2P_IF_DYNBCN_GO,
BRCMF_FIL_P2P_IF_DEV,
};
enum brcmf_wowl_pattern_type {
BRCMF_WOWL_PATTERN_TYPE_BITMAP = 0,
BRCMF_WOWL_PATTERN_TYPE_ARP,
BRCMF_WOWL_PATTERN_TYPE_NA
};
struct brcmf_fil_p2p_if_le {
u8 addr[ETH_ALEN];
__le16 type;
__le16 chspec;
};
struct brcmf_fil_chan_info_le {
__le32 hw_channel;
__le32 target_channel;
__le32 scan_channel;
};
struct brcmf_fil_action_frame_le {
u8 da[ETH_ALEN];
__le16 len;
__le32 packet_id;
u8 data[BRCMF_FIL_ACTION_FRAME_SIZE];
};
struct brcmf_fil_af_params_le {
__le32 channel;
__le32 dwell_time;
u8 bssid[ETH_ALEN];
u8 pad[2];
struct brcmf_fil_action_frame_le action_frame;
};
struct brcmf_fil_bss_enable_le {
__le32 bsscfgidx;
__le32 enable;
};
struct brcmf_fil_bwcap_le {
__le32 band;
__le32 bw_cap;
};
/**
* struct tdls_iovar - common structure for tdls iovars.
*
* @ea: ether address of peer station.
* @mode: mode value depending on specific tdls iovar.
* @chanspec: channel specification.
* @pad: unused (for future use).
*/
struct brcmf_tdls_iovar_le {
u8 ea[ETH_ALEN]; /* Station address */
u8 mode; /* mode: depends on iovar */
__le16 chanspec;
__le32 pad; /* future */
};
enum brcmf_tdls_manual_ep_ops {
BRCMF_TDLS_MANUAL_EP_CREATE = 1,
BRCMF_TDLS_MANUAL_EP_DELETE = 3,
BRCMF_TDLS_MANUAL_EP_DISCOVERY = 6
};
/* Pattern matching filter. Specifies an offset within received packets to
* start matching, the pattern to match, the size of the pattern, and a bitmask
* that indicates which bits within the pattern should be matched.
*/
struct brcmf_pkt_filter_pattern_le {
/*
* Offset within received packet to start pattern matching.
* Offset '0' is the first byte of the ethernet header.
*/
__le32 offset;
/* Size of the pattern. Bitmask must be the same size.*/
__le32 size_bytes;
/*
* Variable length mask and pattern data. mask starts at offset 0.
* Pattern immediately follows mask.
*/
u8 mask_and_pattern[1];
};
/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
struct brcmf_pkt_filter_le {
__le32 id; /* Unique filter id, specified by app. */
__le32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
__le32 negate_match; /* Negate the result of filter matches */
union { /* Filter definitions */
struct brcmf_pkt_filter_pattern_le pattern; /* Filter pattern */
} u;
};
/* IOVAR "pkt_filter_enable" parameter. */
struct brcmf_pkt_filter_enable_le {
__le32 id; /* Unique filter id */
__le32 enable; /* Enable/disable bool */
};
/* BSS info structure
* Applications MUST CHECK ie_offset field and length field to access IEs and
* next bss_info structure in a vector (in struct brcmf_scan_results)
*/
struct brcmf_bss_info_le {
__le32 version; /* version field */
__le32 length; /* byte length of data in this record,
* starting at version and including IEs
*/
u8 BSSID[ETH_ALEN];
__le16 beacon_period; /* units are Kusec */
__le16 capability; /* Capability information */
u8 SSID_len;
u8 SSID[32];
struct {
__le32 count; /* # rates in this set */
u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
} rateset; /* supported rates */
__le16 chanspec; /* chanspec for bss */
__le16 atim_window; /* units are Kusec */
u8 dtim_period; /* DTIM period */
__le16 RSSI; /* receive signal strength (in dBm) */
s8 phy_noise; /* noise (in dBm) */
u8 n_cap; /* BSS is 802.11N Capable */
/* 802.11N BSS Capabilities (based on HT_CAP_*): */
__le32 nbss_cap;
u8 ctl_ch; /* 802.11N BSS control channel number */
__le32 reserved32[1]; /* Reserved for expansion of BSS properties */
u8 flags; /* flags */
u8 reserved[3]; /* Reserved for expansion of BSS properties */
u8 basic_mcs[BRCMF_MCSSET_LEN]; /* 802.11N BSS required MCS set */
__le16 ie_offset; /* offset at which IEs start, from beginning */
__le32 ie_length; /* byte length of Information Elements */
__le16 SNR; /* average SNR of during frame reception */
/* Add new fields here */
/* variable length Information Elements */
};
struct brcm_rateset_le {
/* # rates in this set */
__le32 count;
/* rates in 500kbps units w/hi bit set if basic */
u8 rates[BRCMF_MAXRATES_IN_SET];
};
struct brcmf_ssid_le {
__le32 SSID_len;
unsigned char SSID[IEEE80211_MAX_SSID_LEN];
};
struct brcmf_scan_params_le {
struct brcmf_ssid_le ssid_le; /* default: {0, ""} */
u8 bssid[ETH_ALEN]; /* default: bcast */
s8 bss_type; /* default: any,
* DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
*/
u8 scan_type; /* flags, 0 use default */
__le32 nprobes; /* -1 use default, number of probes per channel */
__le32 active_time; /* -1 use default, dwell time per channel for
* active scanning
*/
__le32 passive_time; /* -1 use default, dwell time per channel
* for passive scanning
*/
__le32 home_time; /* -1 use default, dwell time for the
* home channel between channel scans
*/
__le32 channel_num; /* count of channels and ssids that follow
*
* low half is count of channels in
* channel_list, 0 means default (use all
* available channels)
*
* high half is entries in struct brcmf_ssid
* array that follows channel_list, aligned for
* s32 (4 bytes) meaning an odd channel count
* implies a 2-byte pad between end of
* channel_list and first ssid
*
* if ssid count is zero, single ssid in the
* fixed parameter portion is assumed, otherwise
* ssid in the fixed portion is ignored
*/
__le16 channel_list[1]; /* list of chanspecs */
};
struct brcmf_scan_results {
u32 buflen;
u32 version;
u32 count;
struct brcmf_bss_info_le bss_info_le[];
};
struct brcmf_escan_params_le {
__le32 version;
__le16 action;
__le16 sync_id;
struct brcmf_scan_params_le params_le;
};
struct brcmf_escan_result_le {
__le32 buflen;
__le32 version;
__le16 sync_id;
__le16 bss_count;
struct brcmf_bss_info_le bss_info_le;
};
#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(struct brcmf_escan_result_le) - \
sizeof(struct brcmf_bss_info_le))
/* used for association with a specific BSSID and chanspec list */
struct brcmf_assoc_params_le {
/* 00:00:00:00:00:00: broadcast scan */
u8 bssid[ETH_ALEN];
/* 0: all available channels, otherwise count of chanspecs in
* chanspec_list */
__le32 chanspec_num;
/* list of chanspecs */
__le16 chanspec_list[1];
};
/**
* struct join_pref params - parameters for preferred join selection.
*
* @type: preference type (see enum brcmf_join_pref_types).
* @len: length of bytes following (currently always 2).
* @rssi_gain: signal gain for selection (only when @type is RSSI_DELTA).
* @band: band to which selection preference applies.
* This is used if @type is BAND or RSSI_DELTA.
*/
struct brcmf_join_pref_params {
u8 type;
u8 len;
u8 rssi_gain;
u8 band;
};
/* used for join with or without a specific bssid and channel list */
struct brcmf_join_params {
struct brcmf_ssid_le ssid_le;
struct brcmf_assoc_params_le params_le;
};
/* scan params for extended join */
struct brcmf_join_scan_params_le {
u8 scan_type; /* 0 use default, active or passive scan */
__le32 nprobes; /* -1 use default, nr of probes per channel */
__le32 active_time; /* -1 use default, dwell time per channel for
* active scanning
*/
__le32 passive_time; /* -1 use default, dwell time per channel
* for passive scanning
*/
__le32 home_time; /* -1 use default, dwell time for the home
* channel between channel scans
*/
};
/* extended join params */
struct brcmf_ext_join_params_le {
struct brcmf_ssid_le ssid_le; /* {0, ""}: wildcard scan */
struct brcmf_join_scan_params_le scan_le;
struct brcmf_assoc_params_le assoc_le;
};
struct brcmf_wsec_key {
u32 index; /* key index */
u32 len; /* key length */
u8 data[WLAN_MAX_KEY_LEN]; /* key data */
u32 pad_1[18];
u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
u32 flags; /* misc flags */
u32 pad_2[3];
u32 iv_initialized; /* has IV been initialized already? */
u32 pad_3;
/* Rx IV */
struct {
u32 hi; /* upper 32 bits of IV */
u16 lo; /* lower 16 bits of IV */
} rxiv;
u32 pad_4[2];
u8 ea[ETH_ALEN]; /* per station */
};
/*
* dongle requires same struct as above but with fields in little endian order
*/
struct brcmf_wsec_key_le {
__le32 index; /* key index */
__le32 len; /* key length */
u8 data[WLAN_MAX_KEY_LEN]; /* key data */
__le32 pad_1[18];
__le32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
__le32 flags; /* misc flags */
__le32 pad_2[3];
__le32 iv_initialized; /* has IV been initialized already? */
__le32 pad_3;
/* Rx IV */
struct {
__le32 hi; /* upper 32 bits of IV */
__le16 lo; /* lower 16 bits of IV */
} rxiv;
__le32 pad_4[2];
u8 ea[ETH_ALEN]; /* per station */
};
/**
* struct brcmf_wsec_pmk_le - firmware pmk material.
*
* @key_len: number of octets in key material.
* @flags: key handling qualifiers.
* @key: PMK key material.
*/
struct brcmf_wsec_pmk_le {
__le16 key_len;
__le16 flags;
u8 key[2 * BRCMF_WSEC_MAX_PSK_LEN + 1];
};
/* Used to get specific STA parameters */
struct brcmf_scb_val_le {
__le32 val;
u8 ea[ETH_ALEN];
};
/* channel encoding */
struct brcmf_channel_info_le {
__le32 hw_channel;
__le32 target_channel;
__le32 scan_channel;
};
struct brcmf_sta_info_le {
__le16 ver; /* version of this struct */
__le16 len; /* length in bytes of this structure */
__le16 cap; /* sta's advertised capabilities */
__le32 flags; /* flags defined below */
__le32 idle; /* time since data pkt rx'd from sta */
u8 ea[ETH_ALEN]; /* Station address */
__le32 count; /* # rates in this set */
u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units */
/* w/hi bit set if basic */
__le32 in; /* seconds elapsed since associated */
__le32 listen_interval_inms; /* Min Listen interval in ms for STA */
__le32 tx_pkts; /* # of packets transmitted */
__le32 tx_failures; /* # of packets failed */
__le32 rx_ucast_pkts; /* # of unicast packets received */
__le32 rx_mcast_pkts; /* # of multicast packets received */
__le32 tx_rate; /* Rate of last successful tx frame */
__le32 rx_rate; /* Rate of last successful rx frame */
__le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
__le32 rx_decrypt_failures; /* # of packet decrypted failed */
__le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */
__le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */
__le32 tx_mcast_pkts; /* # of mcast pkts txed */
__le64 tx_tot_bytes; /* data bytes txed (ucast + mcast) */
__le64 rx_tot_bytes; /* data bytes recvd (ucast + mcast) */
__le64 tx_ucast_bytes; /* data bytes txed (ucast) */
__le64 tx_mcast_bytes; /* # data bytes txed (mcast) */
__le64 rx_ucast_bytes; /* data bytes recvd (ucast) */
__le64 rx_mcast_bytes; /* data bytes recvd (mcast) */
s8 rssi[BRCMF_ANT_MAX]; /* per antenna rssi */
s8 nf[BRCMF_ANT_MAX]; /* per antenna noise floor */
__le16 aid; /* association ID */
__le16 ht_capabilities; /* advertised ht caps */
__le16 vht_flags; /* converted vht flags */
__le32 tx_pkts_retry_cnt; /* # of frames where a retry was
* exhausted.
*/
__le32 tx_pkts_retry_exhausted; /* # of user frames where a retry
* was exhausted
*/
s8 rx_lastpkt_rssi[BRCMF_ANT_MAX]; /* Per antenna RSSI of last
* received data frame.
*/
/* TX WLAN retry/failure statistics:
* Separated for host requested frames and locally generated frames.
* Include unicast frame only where the retries/failures can be counted.
*/
__le32 tx_pkts_total; /* # user frames sent successfully */
__le32 tx_pkts_retries; /* # user frames retries */
__le32 tx_pkts_fw_total; /* # FW generated sent successfully */
__le32 tx_pkts_fw_retries; /* # retries for FW generated frames */
__le32 tx_pkts_fw_retry_exhausted; /* # FW generated where a retry
* was exhausted
*/
__le32 rx_pkts_retried; /* # rx with retry bit set */
__le32 tx_rate_fallback; /* lowest fallback TX rate */
};
struct brcmf_chanspec_list {
__le32 count; /* # of entries */
__le32 element[1]; /* variable length uint32 list */
};
/*
* WLC_E_PROBRESP_MSG
* WLC_E_P2P_PROBREQ_MSG
* WLC_E_ACTION_FRAME_RX
*/
struct brcmf_rx_mgmt_data {
__be16 version;
__be16 chanspec;
__be32 rssi;
__be32 mactime;
__be32 rate;
};
/**
* struct brcmf_fil_wowl_pattern_le - wowl pattern configuration struct.
*
* @cmd: "add", "del" or "clr".
* @masksize: Size of the mask in #of bytes
* @offset: Pattern byte offset in packet
* @patternoffset: Offset of start of pattern. Starting from field masksize.
* @patternsize: Size of the pattern itself in #of bytes
* @id: id
* @reasonsize: Size of the wakeup reason code
* @type: Type of pattern (enum brcmf_wowl_pattern_type)
*/
struct brcmf_fil_wowl_pattern_le {
u8 cmd[4];
__le32 masksize;
__le32 offset;
__le32 patternoffset;
__le32 patternsize;
__le32 id;
__le32 reasonsize;
__le32 type;
/* u8 mask[] - Mask follows the structure above */
/* u8 pattern[] - Pattern follows the mask is at 'patternoffset' */
};
struct brcmf_mbss_ssid_le {
__le32 bsscfgidx;
__le32 SSID_len;
unsigned char SSID[32];
};
/**
* struct brcmf_fil_country_le - country configuration structure.
*
* @country_abbrev: null-terminated country code used in the country IE.
* @rev: revision specifier for ccode. on set, -1 indicates unspecified.
* @ccode: null-terminated built-in country code.
*/
struct brcmf_fil_country_le {
char country_abbrev[BRCMF_COUNTRY_BUF_SZ];
__le32 rev;
char ccode[BRCMF_COUNTRY_BUF_SZ];
};
/**
* struct brcmf_rev_info_le - device revision info.
*
* @vendorid: PCI vendor id.
* @deviceid: device id of chip.
* @radiorev: radio revision.
* @chiprev: chip revision.
* @corerev: core revision.
* @boardid: board identifier (usu. PCI sub-device id).
* @boardvendor: board vendor (usu. PCI sub-vendor id).
* @boardrev: board revision.
* @driverrev: driver version.
* @ucoderev: microcode version.
* @bus: bus type.
* @chipnum: chip number.
* @phytype: phy type.
* @phyrev: phy revision.
* @anarev: anacore rev.
* @chippkg: chip package info.
* @nvramrev: nvram revision number.
*/
struct brcmf_rev_info_le {
__le32 vendorid;
__le32 deviceid;
__le32 radiorev;
__le32 chiprev;
__le32 corerev;
__le32 boardid;
__le32 boardvendor;
__le32 boardrev;
__le32 driverrev;
__le32 ucoderev;
__le32 bus;
__le32 chipnum;
__le32 phytype;
__le32 phyrev;
__le32 anarev;
__le32 chippkg;
__le32 nvramrev;
};
/**
* struct brcmf_assoclist_le - request assoc list.
*
* @count: indicates number of stations.
* @mac: MAC addresses of stations.
*/
struct brcmf_assoclist_le {
__le32 count;
u8 mac[BRCMF_MAX_ASSOCLIST][ETH_ALEN];
};
/**
* struct brcmf_wowl_wakeind_le - Wakeup indicators
* Note: note both fields contain same information.
*
* @pci_wakeind: Whether PCI PMECSR PMEStatus bit was set.
* @ucode_wakeind: What wakeup-event indication was set by ucode
*/
struct brcmf_wowl_wakeind_le {
__le32 pci_wakeind;
__le32 ucode_wakeind;
};
/**
* struct brcmf_pmksa - PMK Security Association
*
* @bssid: The AP's BSSID.
* @pmkid: he PMK material itself.
*/
struct brcmf_pmksa {
u8 bssid[ETH_ALEN];
u8 pmkid[WLAN_PMKID_LEN];
};
/**
* struct brcmf_pmk_list_le - List of pmksa's.
*
* @npmk: Number of pmksa's.
* @pmk: PMK SA information.
*/
struct brcmf_pmk_list_le {
__le32 npmk;
struct brcmf_pmksa pmk[BRCMF_MAXPMKID];
};
/**
* struct brcmf_pno_param_le - PNO scan configuration parameters
*
* @version: PNO parameters version.
* @scan_freq: scan frequency.
* @lost_network_timeout: #sec. to declare discovered network as lost.
* @flags: Bit field to control features of PFN such as sort criteria auto
* enable switch and background scan.
* @rssi_margin: Margin to avoid jitter for choosing a PFN based on RSSI sort
* criteria.
* @bestn: number of best networks in each scan.
* @mscan: number of scans recorded.
* @repeat: minimum number of scan intervals before scan frequency changes
* in adaptive scan.
* @exp: exponent of 2 for maximum scan interval.
* @slow_freq: slow scan period.
*/
struct brcmf_pno_param_le {
__le32 version;
__le32 scan_freq;
__le32 lost_network_timeout;
__le16 flags;
__le16 rssi_margin;
u8 bestn;
u8 mscan;
u8 repeat;
u8 exp;
__le32 slow_freq;
};
/**
* struct brcmf_pno_config_le - PNO channel configuration.
*
* @reporttype: determines what is reported.
* @channel_num: number of channels specified in @channel_list.
* @channel_list: channels to use in PNO scan.
* @flags: reserved.
*/
struct brcmf_pno_config_le {
__le32 reporttype;
__le32 channel_num;
__le16 channel_list[BRCMF_NUMCHANNELS];
__le32 flags;
};
/**
* struct brcmf_pno_net_param_le - scan parameters per preferred network.
*
* @ssid: ssid name and its length.
* @flags: bit2: hidden.
* @infra: BSS vs IBSS.
* @auth: Open vs Closed.
* @wpa_auth: WPA type.
* @wsec: wsec value.
*/
struct brcmf_pno_net_param_le {
struct brcmf_ssid_le ssid;
__le32 flags;
__le32 infra;
__le32 auth;
__le32 wpa_auth;
__le32 wsec;
};
/**
* struct brcmf_pno_net_info_le - information per found network.
*
* @bssid: BSS network identifier.
* @channel: channel number only.
* @SSID_len: length of ssid.
* @SSID: ssid characters.
* @RSSI: receive signal strength (in dBm).
* @timestamp: age in seconds.
*/
struct brcmf_pno_net_info_le {
u8 bssid[ETH_ALEN];
u8 channel;
u8 SSID_len;
u8 SSID[32];
__le16 RSSI;
__le16 timestamp;
};
/**
* struct brcmf_pno_scanresults_le - result returned in PNO NET FOUND event.
*
* @version: PNO version identifier.
* @status: indicates completion status of PNO scan.
* @count: amount of brcmf_pno_net_info_le entries appended.
*/
struct brcmf_pno_scanresults_le {
__le32 version;
__le32 status;
__le32 count;
};
struct brcmf_pno_scanresults_v2_le {
__le32 version;
__le32 status;
__le32 count;
__le32 scan_ch_bucket;
};
/**
* struct brcmf_pno_macaddr_le - to configure PNO macaddr randomization.
*
* @version: PNO version identifier.
* @flags: Flags defining how mac addrss should be used.
* @mac: MAC address.
*/
struct brcmf_pno_macaddr_le {
u8 version;
u8 flags;
u8 mac[ETH_ALEN];
};
/**
* struct brcmf_pktcnt_le - packet counters.
*
* @rx_good_pkt: packets (MSDUs & MMPDUs) received from this station
* @rx_bad_pkt: failed rx packets
* @tx_good_pkt: packets (MSDUs & MMPDUs) transmitted to this station
* @tx_bad_pkt: failed tx packets
* @rx_ocast_good_pkt: unicast packets destined for others
*/
struct brcmf_pktcnt_le {
__le32 rx_good_pkt;
__le32 rx_bad_pkt;
__le32 tx_good_pkt;
__le32 tx_bad_pkt;
__le32 rx_ocast_good_pkt;
};
/**
* struct brcmf_gtk_keyinfo_le - GTP rekey data
*
* @kck: key confirmation key.
* @kek: key encryption key.
* @replay_counter: replay counter.
*/
struct brcmf_gtk_keyinfo_le {
u8 kck[BRCMF_RSN_KCK_LENGTH];
u8 kek[BRCMF_RSN_KEK_LENGTH];
u8 replay_counter[BRCMF_RSN_REPLAY_LEN];
};
/**
* struct brcmf_dload_data_le - data passing to firmware for downloading
*/
struct brcmf_dload_data_le {
__le16 flag;
__le16 dload_type;
__le32 len;
__le32 crc;
u8 data[1];
};
typedef struct wl_mkeep_alive_pkt {
__le16 version; /* Version for mkeep_alive */
__le16 length; /* length of fixed parameters in the structure */
__le32 period_msec;
__le16 len_bytes;
u8 keep_alive_id; /* 0 - 3 for N = 4 */
u8 data[1];
} wl_mkeep_alive_pkt_t;
#define WL_MKEEP_ALIVE_VERSION 1
#define WL_MKEEP_ALIVE_FIXED_LEN offsetof(wl_mkeep_alive_pkt_t, data)
#define WL_MKEEP_ALIVE_PRECISION 500
#endif /* FWIL_TYPES_H_ */