| if ARCH_PXA | |
| menu "Intel PXA2xx/PXA3xx Implementations" | |
| comment "Intel/Marvell Dev Platforms (sorted by hardware release time)" | |
| config MACH_PXA3XX_DT | |
| bool "Support PXA3xx platforms from device tree" | |
| select CPU_PXA300 | |
| select HAVE_PWM | |
| select POWER_SUPPLY | |
| select PXA3xx | |
| select USE_OF | |
| help | |
| Include support for Marvell PXA3xx based platforms using | |
| the device tree. Needn't select any other machine while | |
| MACH_PXA3XX_DT is enabled. | |
| config ARCH_LUBBOCK | |
| bool "Intel DBPXA250 Development Platform (aka Lubbock)" | |
| select PXA25x | |
| select SA1111 | |
| config MACH_MAINSTONE | |
| bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" | |
| select HAVE_PWM | |
| select PXA27x | |
| config MACH_ZYLONITE | |
| bool | |
| select HAVE_PWM | |
| select PXA3xx | |
| config MACH_ZYLONITE300 | |
| bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" | |
| select CPU_PXA300 | |
| select CPU_PXA310 | |
| select MACH_ZYLONITE | |
| config MACH_ZYLONITE320 | |
| bool "PXA3xx Development Platform (aka Zylonite) PXA320" | |
| select CPU_PXA320 | |
| select MACH_ZYLONITE | |
| config MACH_LITTLETON | |
| bool "PXA3xx Form Factor Platform (aka Littleton)" | |
| select CPU_PXA300 | |
| select CPU_PXA310 | |
| select PXA3xx | |
| config MACH_TAVOREVB | |
| bool "PXA930 Evaluation Board (aka TavorEVB)" | |
| select CPU_PXA930 | |
| select CPU_PXA935 | |
| select PXA3xx | |
| config MACH_SAAR | |
| bool "PXA930 Handheld Platform (aka SAAR)" | |
| select CPU_PXA930 | |
| select CPU_PXA935 | |
| select PXA3xx | |
| comment "Third Party Dev Platforms (sorted by vendor name)" | |
| config ARCH_PXA_IDP | |
| bool "Accelent Xscale IDP" | |
| select PXA25x | |
| config ARCH_VIPER | |
| bool "Arcom/Eurotech VIPER SBC" | |
| select ARCOM_PCMCIA | |
| select HAVE_PWM | |
| select I2C_GPIO | |
| select ISA | |
| select PXA25x | |
| select PXA_HAVE_ISA_IRQS | |
| config MACH_ARCOM_ZEUS | |
| bool "Arcom/Eurotech ZEUS SBC" | |
| select ARCOM_PCMCIA | |
| select ISA | |
| select PXA27x | |
| select PXA_HAVE_ISA_IRQS | |
| config MACH_BALLOON3 | |
| bool "Balloon 3 board" | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_CSB726 | |
| bool "Enable Cogent CSB726 System On a Module" | |
| select IWMMXT | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on a Cogent | |
| CSB726 System On Module. | |
| config CSB726_CSB701 | |
| bool "Enable support for CSB701 baseboard" | |
| depends on MACH_CSB726 | |
| config MACH_ARMCORE | |
| bool "CompuLab CM-X255/CM-X270 modules" | |
| select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI | |
| select IWMMXT | |
| select MIGHT_HAVE_PCI | |
| select NEED_MACH_IO_H if PCI | |
| select PXA25x | |
| select PXA27x | |
| config MACH_EM_X270 | |
| bool "CompuLab EM-x270 platform" | |
| select PXA27x | |
| config MACH_EXEDA | |
| bool "CompuLab eXeda platform" | |
| select PXA27x | |
| config MACH_CM_X300 | |
| bool "CompuLab CM-X300 modules" | |
| select CPU_PXA300 | |
| select CPU_PXA310 | |
| select HAVE_PWM | |
| select PXA3xx | |
| config MACH_CAPC7117 | |
| bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" | |
| select CPU_PXA320 | |
| select PXA3xx | |
| config ARCH_GUMSTIX | |
| bool "Gumstix XScale 255 boards" | |
| select PXA25x | |
| help | |
| Say Y here if you intend to run this kernel on | |
| Basix, Connex, ws-200ax, ws-400ax systems | |
| choice | |
| prompt "Gumstix Carrier/Expansion Board" | |
| depends on ARCH_GUMSTIX | |
| config GUMSTIX_AM200EPD | |
| bool "Enable AM200EPD board support" | |
| config GUMSTIX_AM300EPD | |
| bool "Enable AM300EPD board support" | |
| endchoice | |
| config MACH_INTELMOTE2 | |
| bool "Intel Mote 2 Platform" | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_STARGATE2 | |
| bool "Intel Stargate 2 Platform" | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_XCEP | |
| bool "Iskratel Electronics XCEP" | |
| select MTD | |
| select MTD_CFI | |
| select MTD_CFI_INTELEXT | |
| select MTD_PHYSMAP | |
| select PXA25x | |
| select SMC91X | |
| help | |
| PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash. | |
| Tuned for usage in Libera instruments for particle accelerators. | |
| config TRIZEPS_PXA | |
| bool "PXA based Keith und Koep Trizeps DIMM-Modules" | |
| config MACH_TRIZEPS4 | |
| bool "Keith und Koep Trizeps4 DIMM-Module" | |
| depends on TRIZEPS_PXA | |
| select PXA27x | |
| select TRIZEPS_PCMCIA | |
| config MACH_TRIZEPS4WL | |
| bool "Keith und Koep Trizeps4-WL DIMM-Module" | |
| depends on TRIZEPS_PXA | |
| select PXA27x | |
| select TRIZEPS_PCMCIA | |
| choice | |
| prompt "Select base board for Trizeps module" | |
| depends on TRIZEPS_PXA | |
| config MACH_TRIZEPS_CONXS | |
| bool "ConXS Eval Board" | |
| config MACH_TRIZEPS_UCONXS | |
| bool "uConXS Eval Board" | |
| config MACH_TRIZEPS_ANY | |
| bool "another Board" | |
| endchoice | |
| config ARCOM_PCMCIA | |
| bool | |
| help | |
| Generic option for Arcom Viper/Zeus PCMCIA | |
| config TRIZEPS_PCMCIA | |
| bool | |
| help | |
| Enable PCMCIA support for Trizeps modules | |
| config MACH_LOGICPD_PXA270 | |
| bool "LogicPD PXA270 Card Engine Development Platform" | |
| select HAVE_PWM | |
| select PXA27x | |
| config MACH_PCM027 | |
| bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_PCM990_BASEBOARD | |
| bool "PHYTEC PCM-990 development board" | |
| depends on MACH_PCM027 | |
| select HAVE_PWM | |
| choice | |
| prompt "display on pcm990" | |
| depends on MACH_PCM990_BASEBOARD | |
| config PCM990_DISPLAY_SHARP | |
| bool "sharp lq084v1dg21 stn display" | |
| config PCM990_DISPLAY_NEC | |
| bool "nec nl6448bc20_18d tft display" | |
| config PCM990_DISPLAY_NONE | |
| bool "no display" | |
| endchoice | |
| config MACH_COLIBRI | |
| bool "Toradex Colibri PXA270" | |
| select PXA27x | |
| config MACH_COLIBRI_PXA270_INCOME | |
| bool "Income s.r.o. PXA270 SBC" | |
| depends on MACH_COLIBRI | |
| select HAVE_PWM | |
| select PXA27x | |
| config MACH_COLIBRI300 | |
| bool "Toradex Colibri PXA300/310" | |
| select CPU_PXA300 | |
| select CPU_PXA310 | |
| select PXA3xx | |
| config MACH_COLIBRI320 | |
| bool "Toradex Colibri PXA320" | |
| select CPU_PXA320 | |
| select PXA3xx | |
| config MACH_COLIBRI_EVALBOARD | |
| bool "Toradex Colibri Evaluation Carrier Board support" | |
| depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 | |
| config MACH_VPAC270 | |
| bool "Voipac PXA270" | |
| select HAVE_PATA_PLATFORM | |
| select PXA27x | |
| help | |
| PXA270 based Single Board Computer. | |
| comment "End-user Products (sorted by vendor name)" | |
| config MACH_H4700 | |
| bool "HP iPAQ hx4700" | |
| select HAVE_PWM | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_H5000 | |
| bool "HP iPAQ h5000" | |
| select PXA25x | |
| config MACH_HIMALAYA | |
| bool "HTC Himalaya Support" | |
| select CPU_PXA26x | |
| config MACH_MAGICIAN | |
| bool "Enable HTC Magician Support" | |
| select HAVE_PWM | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_MIOA701 | |
| bool "Mitac Mio A701 Support" | |
| select GPIO_SYSFS | |
| select HAVE_PWM | |
| select IWMMXT | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on a | |
| MIO A701. Currently there is only basic support | |
| for this PDA. | |
| config PXA_EZX | |
| bool "Motorola EZX Platform" | |
| select HAVE_PWM | |
| select IWMMXT | |
| select PXA27x | |
| config MACH_EZX_A780 | |
| bool "Motorola EZX A780" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_EZX_E680 | |
| bool "Motorola EZX E680" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_EZX_A1200 | |
| bool "Motorola EZX A1200" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_EZX_A910 | |
| bool "Motorola EZX A910" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_EZX_E6 | |
| bool "Motorola EZX E6" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_EZX_E2 | |
| bool "Motorola EZX E2" | |
| default y | |
| depends on PXA_EZX | |
| config MACH_MP900C | |
| bool "Nec Mobilepro 900/c" | |
| select PXA25x | |
| config ARCH_PXA_PALM | |
| bool "PXA based Palm PDAs" | |
| select HAVE_PWM | |
| config MACH_PALM27X | |
| bool | |
| config MACH_PALMTE2 | |
| bool "Palm Tungsten|E2" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select PXA25x | |
| help | |
| Say Y here if you intend to run this kernel on a Palm Tungsten|E2 | |
| handheld computer. | |
| config MACH_PALMTC | |
| bool "Palm Tungsten|C" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select PXA25x | |
| help | |
| Say Y here if you intend to run this kernel on a Palm Tungsten|C | |
| handheld computer. | |
| config MACH_PALMT5 | |
| bool "Palm Tungsten|T5" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on a Palm Tungsten|T5 | |
| handheld computer. | |
| config MACH_PALMTX | |
| bool "Palm T|X" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on a Palm T|X | |
| handheld computer. | |
| config MACH_PALMZ72 | |
| bool "Palm Zire 72" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on Palm Zire 72 | |
| handheld computer. | |
| config MACH_PALMLD | |
| bool "Palm LifeDrive" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on a Palm LifeDrive | |
| handheld computer. | |
| config PALM_TREO | |
| bool | |
| depends on ARCH_PXA_PALM | |
| config MACH_CENTRO | |
| bool "Palm Centro 685 (GSM)" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PALM_TREO | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on Palm Centro 685 (GSM) | |
| smartphone. | |
| config MACH_TREO680 | |
| bool "Palm Treo 680" | |
| default y | |
| depends on ARCH_PXA_PALM | |
| select IWMMXT | |
| select MACH_PALM27X | |
| select PALM_TREO | |
| select PXA27x | |
| help | |
| Say Y here if you intend to run this kernel on Palm Treo 680 | |
| smartphone. | |
| config MACH_RAUMFELD_RC | |
| bool "Raumfeld Controller" | |
| select CPU_PXA300 | |
| select HAVE_PWM | |
| select POWER_SUPPLY | |
| select PXA3xx | |
| config MACH_RAUMFELD_CONNECTOR | |
| bool "Raumfeld Connector" | |
| select CPU_PXA300 | |
| select POWER_SUPPLY | |
| select PXA3xx | |
| config MACH_RAUMFELD_SPEAKER | |
| bool "Raumfeld Speaker" | |
| select CPU_PXA300 | |
| select POWER_SUPPLY | |
| select PXA3xx | |
| config PXA_SHARPSL | |
| bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" | |
| select SHARP_PARAM | |
| select SHARP_SCOOP | |
| help | |
| Say Y here if you intend to run this kernel on a | |
| Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), | |
| SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), | |
| SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) | |
| handheld computer. | |
| config PXA_SHARPSL_DETECT_MACH_ID | |
| bool "Detect machine ID at run-time in the decompressor" | |
| depends on PXA_SHARPSL | |
| help | |
| Say Y here if you want the zImage decompressor to detect | |
| the Zaurus machine ID at run-time. For latest kexec-based | |
| boot loader, this is not necessary. | |
| config MACH_POODLE | |
| bool "Enable Sharp SL-5600 (Poodle) Support" | |
| depends on PXA_SHARPSL | |
| select PXA25x | |
| select SHARP_LOCOMO | |
| config MACH_CORGI | |
| bool "Enable Sharp SL-C700 (Corgi) Support" | |
| depends on PXA_SHARPSL | |
| select PXA25x | |
| select PXA_SHARP_C7xx | |
| config MACH_SHEPHERD | |
| bool "Enable Sharp SL-C750 (Shepherd) Support" | |
| depends on PXA_SHARPSL | |
| select PXA25x | |
| select PXA_SHARP_C7xx | |
| config MACH_HUSKY | |
| bool "Enable Sharp SL-C760 (Husky) Support" | |
| depends on PXA_SHARPSL | |
| select PXA25x | |
| select PXA_SHARP_C7xx | |
| config MACH_AKITA | |
| bool "Enable Sharp SL-1000 (Akita) Support" | |
| depends on PXA_SHARPSL | |
| select I2C | |
| select I2C_PXA | |
| select MACH_SPITZ | |
| select PXA27x | |
| select PXA_SHARP_Cxx00 | |
| config MACH_SPITZ | |
| bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" | |
| depends on PXA_SHARPSL | |
| select PXA27x | |
| select PXA_SHARP_Cxx00 | |
| config MACH_BORZOI | |
| bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" | |
| depends on PXA_SHARPSL | |
| select PXA27x | |
| select PXA_SHARP_Cxx00 | |
| config MACH_TOSA | |
| bool "Enable Sharp SL-6000x (Tosa) Support" | |
| depends on PXA_SHARPSL | |
| select PXA25x | |
| config TOSA_BT | |
| tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" | |
| depends on MACH_TOSA | |
| select RFKILL | |
| help | |
| This is a simple driver that is able to control | |
| the state of built in bluetooth chip on tosa. | |
| config TOSA_USE_EXT_KEYCODES | |
| bool "Tosa keyboard: use extended keycodes" | |
| depends on MACH_TOSA | |
| default n | |
| help | |
| Say Y here to enable the tosa keyboard driver to generate extended | |
| (>= 127) keycodes. Be aware, that they can't be correctly interpreted | |
| by either console keyboard driver or by Kdrive keybd driver. | |
| Say Y only if you know, what you are doing! | |
| config MACH_ICONTROL | |
| bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" | |
| select CPU_PXA320 | |
| select PXA3xx | |
| config ARCH_PXA_ESERIES | |
| bool "PXA based Toshiba e-series PDAs" | |
| select FB_W100 | |
| select PXA25x | |
| config MACH_E330 | |
| bool "Toshiba e330" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e330 family PDA. | |
| config MACH_E350 | |
| bool "Toshiba e350" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e350 family PDA. | |
| config MACH_E740 | |
| bool "Toshiba e740" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e740 family PDA. | |
| config MACH_E750 | |
| bool "Toshiba e750" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e750 family PDA. | |
| config MACH_E400 | |
| bool "Toshiba e400" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e400 family PDA. | |
| config MACH_E800 | |
| bool "Toshiba e800" | |
| default y | |
| depends on ARCH_PXA_ESERIES | |
| help | |
| Say Y here if you intend to run this kernel on a Toshiba | |
| e800 family PDA. | |
| config MACH_ZIPIT2 | |
| bool "Zipit Z2 Handheld" | |
| select HAVE_PWM | |
| select PXA27x | |
| endmenu | |
| config PXA25x | |
| bool | |
| select CPU_XSCALE | |
| help | |
| Select code specific to PXA21x/25x/26x variants | |
| config PXA27x | |
| bool | |
| select CPU_XSCALE | |
| help | |
| Select code specific to PXA27x variants | |
| config CPU_PXA26x | |
| bool | |
| select PXA25x | |
| help | |
| Select code specific to PXA26x (codename Dalhart) | |
| config PXA3xx | |
| bool | |
| select CPU_XSC3 | |
| help | |
| Select code specific to PXA3xx variants | |
| config CPU_PXA300 | |
| bool | |
| select PXA3xx | |
| help | |
| PXA300 (codename Monahans-L) | |
| config CPU_PXA310 | |
| bool | |
| select CPU_PXA300 | |
| select PXA310_ULPI if USB_ULPI | |
| help | |
| PXA310 (codename Monahans-LV) | |
| config CPU_PXA320 | |
| bool | |
| select PXA3xx | |
| help | |
| PXA320 (codename Monahans-P) | |
| config CPU_PXA930 | |
| bool | |
| select PXA3xx | |
| help | |
| PXA930 (codename Tavor-P) | |
| config CPU_PXA935 | |
| bool | |
| select CPU_PXA930 | |
| help | |
| PXA935 (codename Tavor-P65) | |
| config PXA_SHARP_C7xx | |
| bool | |
| select SHARPSL_PM | |
| help | |
| Enable support for all Sharp C7xx models | |
| config PXA_SHARP_Cxx00 | |
| bool | |
| select SHARPSL_PM | |
| help | |
| Enable common support for Sharp Cxx00 models | |
| config SHARPSL_PM | |
| bool | |
| select APM_EMULATION | |
| select SHARPSL_PM_MAX1111 | |
| config SHARPSL_PM_MAX1111 | |
| bool | |
| select HWMON | |
| select SENSORS_MAX1111 | |
| select SPI | |
| select SPI_MASTER | |
| config PXA_HAVE_ISA_IRQS | |
| bool | |
| config PXA310_ULPI | |
| bool | |
| endif |