| menuconfig SND_HDA_INTEL | |
| tristate "Intel HD Audio" | |
| select SND_PCM | |
| select SND_VMASTER | |
| select SND_KCTL_JACK | |
| help | |
| Say Y here to include support for Intel "High Definition | |
| Audio" (Azalia) and its compatible devices. | |
| This option enables the HD-audio controller. Don't forget | |
| to choose the appropriate codec options below. | |
| To compile this driver as a module, choose M here: the module | |
| will be called snd-hda-intel. | |
| if SND_HDA_INTEL | |
| config SND_HDA_DSP_LOADER | |
| bool | |
| config SND_HDA_PREALLOC_SIZE | |
| int "Pre-allocated buffer size for HD-audio driver" | |
| range 0 32768 | |
| default 64 | |
| help | |
| Specifies the default pre-allocated buffer-size in kB for the | |
| HD-audio driver. A larger buffer (e.g. 2048) is preferred | |
| for systems using PulseAudio. The default 64 is chosen just | |
| for compatibility reasons. | |
| Note that the pre-allocation size can be changed dynamically | |
| via a proc file (/proc/asound/card*/pcm*/sub*/prealloc), too. | |
| config SND_HDA_HWDEP | |
| bool "Build hwdep interface for HD-audio driver" | |
| select SND_HWDEP | |
| help | |
| Say Y here to build a hwdep interface for HD-audio driver. | |
| This interface can be used for out-of-band communication | |
| with codecs for debugging purposes. | |
| config SND_HDA_RECONFIG | |
| bool "Allow dynamic codec reconfiguration" | |
| depends on SND_HDA_HWDEP | |
| help | |
| Say Y here to enable the HD-audio codec re-configuration feature. | |
| This adds the sysfs interfaces to allow user to clear the whole | |
| codec configuration, change the codec setup, add extra verbs, | |
| and re-configure the codec dynamically. | |
| config SND_HDA_INPUT_BEEP | |
| bool "Support digital beep via input layer" | |
| depends on INPUT=y || INPUT=SND_HDA_INTEL | |
| help | |
| Say Y here to build a digital beep interface for HD-audio | |
| driver. This interface is used to generate digital beeps. | |
| config SND_HDA_INPUT_BEEP_MODE | |
| int "Digital beep registration mode (0=off, 1=on)" | |
| depends on SND_HDA_INPUT_BEEP=y | |
| default "1" | |
| range 0 1 | |
| help | |
| Set 0 to disable the digital beep interface for HD-audio by default. | |
| Set 1 to always enable the digital beep interface for HD-audio by | |
| default. | |
| config SND_HDA_INPUT_JACK | |
| bool "Support jack plugging notification via input layer" | |
| depends on INPUT=y || INPUT=SND | |
| select SND_JACK | |
| help | |
| Say Y here to enable the jack plugging notification via | |
| input layer. | |
| config SND_HDA_PATCH_LOADER | |
| bool "Support initialization patch loading for HD-audio" | |
| select FW_LOADER | |
| select SND_HDA_HWDEP | |
| select SND_HDA_RECONFIG | |
| help | |
| Say Y here to allow the HD-audio driver to load a pseudo | |
| firmware file ("patch") for overriding the BIOS setup at | |
| start up. The "patch" file can be specified via patch module | |
| option, such as patch=hda-init. | |
| This option turns on hwdep and reconfig features automatically. | |
| config SND_HDA_CODEC_REALTEK | |
| bool "Build Realtek HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include Realtek HD-audio codec support in | |
| snd-hda-intel driver, such as ALC880. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-realtek. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_ANALOG | |
| bool "Build Analog Device HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include Analog Device HD-audio codec support in | |
| snd-hda-intel driver, such as AD1986A. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-analog. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_SIGMATEL | |
| bool "Build IDT/Sigmatel HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include IDT (Sigmatel) HD-audio codec support in | |
| snd-hda-intel driver, such as STAC9200. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-idt. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_VIA | |
| bool "Build VIA HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include VIA HD-audio codec support in | |
| snd-hda-intel driver, such as VT1708. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-via. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_HDMI | |
| bool "Build HDMI/DisplayPort HD-audio codec support" | |
| select SND_DYNAMIC_MINORS | |
| default y | |
| help | |
| Say Y here to include HDMI and DisplayPort HD-audio codec | |
| support in snd-hda-intel driver. This includes all AMD/ATI, | |
| Intel and Nvidia HDMI/DisplayPort codecs. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-hdmi. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_CIRRUS | |
| bool "Build Cirrus Logic codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include Cirrus Logic codec support in | |
| snd-hda-intel driver, such as CS4206. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-cirrus. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_CONEXANT | |
| bool "Build Conexant HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include Conexant HD-audio codec support in | |
| snd-hda-intel driver, such as CX20549. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-conexant. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_CA0110 | |
| bool "Build Creative CA0110-IBG codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include Creative CA0110-IBG codec support in | |
| snd-hda-intel driver, found on some Creative X-Fi cards. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-ca0110. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_CA0132 | |
| bool "Build Creative CA0132 codec support" | |
| default y | |
| help | |
| Say Y here to include Creative CA0132 codec support in | |
| snd-hda-intel driver. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-ca0132. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_CA0132_DSP | |
| bool "Support new DSP code for CA0132 codec" | |
| depends on SND_HDA_CODEC_CA0132 && FW_LOADER | |
| select SND_HDA_DSP_LOADER | |
| help | |
| Say Y here to enable the DSP for Creative CA0132 for extended | |
| features like equalizer or echo cancellation. | |
| Note that this option requires the external firmware file | |
| (ctefx.bin). | |
| config SND_HDA_CODEC_CMEDIA | |
| bool "Build C-Media HD-audio codec support" | |
| default y | |
| select SND_HDA_GENERIC | |
| help | |
| Say Y here to include C-Media HD-audio codec support in | |
| snd-hda-intel driver, such as CMI9880. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-cmedia. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_CODEC_SI3054 | |
| bool "Build Silicon Labs 3054 HD-modem codec support" | |
| default y | |
| help | |
| Say Y here to include Silicon Labs 3054 HD-modem codec | |
| (and compatibles) support in snd-hda-intel driver. | |
| When the HD-audio driver is built as a module, the codec | |
| support code is also built as another module, | |
| snd-hda-codec-si3054. | |
| This module is automatically loaded at probing. | |
| config SND_HDA_GENERIC | |
| bool "Enable generic HD-audio codec parser" | |
| default y | |
| help | |
| Say Y here to enable the generic HD-audio codec parser | |
| in snd-hda-intel driver. | |
| config SND_HDA_POWER_SAVE_DEFAULT | |
| int "Default time-out for HD-audio power-save mode" | |
| depends on PM | |
| default 0 | |
| help | |
| The default time-out value in seconds for HD-audio automatic | |
| power-save mode. 0 means to disable the power-save mode. | |
| endif |