|  | /* | 
|  | * (C) Copyright 2002 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | * (C) Copyright 2002 | 
|  | * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> | 
|  | * | 
|  | * (C) Copyright 2003 | 
|  | * Kai-Uwe Bloem, Auerswald GmbH & Co KG, <linux-development@auerswald.de> | 
|  | * | 
|  | * (C) Copyright 2005 | 
|  | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | 
|  | * | 
|  | *   Added support for reading flash partition table from environment. | 
|  | *   Parsing routines are based on driver/mtd/cmdline.c from the linux 2.4 | 
|  | *   kernel tree. | 
|  | * | 
|  | * (C) Copyright 2008 | 
|  | * Harald Welte, OpenMoko, Inc., Harald Welte <laforge@openmoko.org> | 
|  | * | 
|  | *   $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $ | 
|  | *   Copyright 2002 SYSGO Real-Time Solutions GmbH | 
|  | * | 
|  | * SPDX-License-Identifier:	GPL-2.0+ | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Three environment variables are used by the parsing routines: | 
|  | * | 
|  | * 'partition' - keeps current partition identifier | 
|  | * | 
|  | * partition  := <part-id> | 
|  | * <part-id>  := <dev-id>,part_num | 
|  | * | 
|  | * | 
|  | * 'mtdids' - linux kernel mtd device id <-> u-boot device id mapping | 
|  | * | 
|  | * mtdids=<idmap>[,<idmap>,...] | 
|  | * | 
|  | * <idmap>    := <dev-id>=<mtd-id> | 
|  | * <dev-id>   := 'nand'|'nor'|'onenand'<dev-num> | 
|  | * <dev-num>  := mtd device number, 0... | 
|  | * <mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name) | 
|  | * | 
|  | * | 
|  | * 'mtdparts' - partition list | 
|  | * | 
|  | * mtdparts=mtdparts=<mtd-def>[;<mtd-def>...] | 
|  | * | 
|  | * <mtd-def>  := <mtd-id>:<part-def>[,<part-def>...] | 
|  | * <mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name) | 
|  | * <part-def> := <size>[@<offset>][<name>][<ro-flag>] | 
|  | * <size>     := standard linux memsize OR '-' to denote all remaining space | 
|  | * <offset>   := partition start offset within the device | 
|  | * <name>     := '(' NAME ')' | 
|  | * <ro-flag>  := when set to 'ro' makes partition read-only (not used, passed to kernel) | 
|  | * | 
|  | * Notes: | 
|  | * - each <mtd-id> used in mtdparts must albo exist in 'mtddis' mapping | 
|  | * - if the above variables are not set defaults for a given target are used | 
|  | * | 
|  | * Examples: | 
|  | * | 
|  | * 1 NOR Flash, with 1 single writable partition: | 
|  | * mtdids=nor0=edb7312-nor | 
|  | * mtdparts=mtdparts=edb7312-nor:- | 
|  | * | 
|  | * 1 NOR Flash with 2 partitions, 1 NAND with one | 
|  | * mtdids=nor0=edb7312-nor,nand0=edb7312-nand | 
|  | * mtdparts=mtdparts=edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home) | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <common.h> | 
|  | #include <command.h> | 
|  | #include <malloc.h> | 
|  | #include <jffs2/load_kernel.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  |  | 
|  | #if defined(CONFIG_CMD_NAND) | 
|  | #include <linux/mtd/nand.h> | 
|  | #include <nand.h> | 
|  | #endif | 
|  |  | 
|  | #if defined(CONFIG_CMD_ONENAND) | 
|  | #include <linux/mtd/onenand.h> | 
|  | #include <onenand_uboot.h> | 
|  | #endif | 
|  |  | 
|  | DECLARE_GLOBAL_DATA_PTR; | 
|  |  | 
|  | /* special size referring to all the remaining space in a partition */ | 
|  | #define SIZE_REMAINING		(~0llu) | 
|  |  | 
|  | /* special offset value, it is used when not provided by user | 
|  | * | 
|  | * this value is used temporarily during parsing, later such offests | 
|  | * are recalculated */ | 
|  | #define OFFSET_NOT_SPECIFIED	(~0llu) | 
|  |  | 
|  | /* minimum partition size */ | 
|  | #define MIN_PART_SIZE		4096 | 
|  |  | 
|  | /* this flag needs to be set in part_info struct mask_flags | 
|  | * field for read-only partitions */ | 
|  | #define MTD_WRITEABLE_CMD		1 | 
|  |  | 
|  | /* default values for mtdids and mtdparts variables */ | 
|  | #if defined(MTDIDS_DEFAULT) | 
|  | static const char *const mtdids_default = MTDIDS_DEFAULT; | 
|  | #else | 
|  | static const char *const mtdids_default = NULL; | 
|  | #endif | 
|  |  | 
|  | #if defined(MTDPARTS_DEFAULT) | 
|  | static const char *const mtdparts_default = MTDPARTS_DEFAULT; | 
|  | #else | 
|  | static const char *const mtdparts_default = NULL; | 
|  | #endif | 
|  |  | 
|  | /* copies of last seen 'mtdids', 'mtdparts' and 'partition' env variables */ | 
|  | #define MTDIDS_MAXLEN		128 | 
|  | #define MTDPARTS_MAXLEN		512 | 
|  | #define PARTITION_MAXLEN	16 | 
|  | static char last_ids[MTDIDS_MAXLEN]; | 
|  | static char last_parts[MTDPARTS_MAXLEN]; | 
|  | static char last_partition[PARTITION_MAXLEN]; | 
|  |  | 
|  | /* low level jffs2 cache cleaning routine */ | 
|  | extern void jffs2_free_cache(struct part_info *part); | 
|  |  | 
|  | /* mtdids mapping list, filled by parse_ids() */ | 
|  | static struct list_head mtdids; | 
|  |  | 
|  | /* device/partition list, parse_cmdline() parses into here */ | 
|  | static struct list_head devices; | 
|  |  | 
|  | /* current active device and partition number */ | 
|  | struct mtd_device *current_mtd_dev = NULL; | 
|  | u8 current_mtd_partnum = 0; | 
|  |  | 
|  | static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part_num); | 
|  |  | 
|  | /* command line only routines */ | 
|  | static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_len); | 
|  | static int device_del(struct mtd_device *dev); | 
|  |  | 
|  | /** | 
|  | * Parses a string into a number.  The number stored at ptr is | 
|  | * potentially suffixed with K (for kilobytes, or 1024 bytes), | 
|  | * M (for megabytes, or 1048576 bytes), or G (for gigabytes, or | 
|  | * 1073741824).  If the number is suffixed with K, M, or G, then | 
|  | * the return value is the number multiplied by one kilobyte, one | 
|  | * megabyte, or one gigabyte, respectively. | 
|  | * | 
|  | * @param ptr where parse begins | 
|  | * @param retptr output pointer to next char after parse completes (output) | 
|  | * @return resulting unsigned int | 
|  | */ | 
|  | static u64 memsize_parse (const char *const ptr, const char **retptr) | 
|  | { | 
|  | u64 ret = simple_strtoull(ptr, (char **)retptr, 0); | 
|  |  | 
|  | switch (**retptr) { | 
|  | case 'G': | 
|  | case 'g': | 
|  | ret <<= 10; | 
|  | case 'M': | 
|  | case 'm': | 
|  | ret <<= 10; | 
|  | case 'K': | 
|  | case 'k': | 
|  | ret <<= 10; | 
|  | (*retptr)++; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Format string describing supplied size. This routine does the opposite job | 
|  | * to memsize_parse(). Size in bytes is converted to string and if possible | 
|  | * shortened by using k (kilobytes), m (megabytes) or g (gigabytes) suffix. | 
|  | * | 
|  | * Note, that this routine does not check for buffer overflow, it's the caller | 
|  | * who must assure enough space. | 
|  | * | 
|  | * @param buf output buffer | 
|  | * @param size size to be converted to string | 
|  | */ | 
|  | static void memsize_format(char *buf, u64 size) | 
|  | { | 
|  | #define SIZE_GB ((u32)1024*1024*1024) | 
|  | #define SIZE_MB ((u32)1024*1024) | 
|  | #define SIZE_KB ((u32)1024) | 
|  |  | 
|  | if ((size % SIZE_GB) == 0) | 
|  | sprintf(buf, "%llug", size/SIZE_GB); | 
|  | else if ((size % SIZE_MB) == 0) | 
|  | sprintf(buf, "%llum", size/SIZE_MB); | 
|  | else if (size % SIZE_KB == 0) | 
|  | sprintf(buf, "%lluk", size/SIZE_KB); | 
|  | else | 
|  | sprintf(buf, "%llu", size); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * This routine does global indexing of all partitions. Resulting index for | 
|  | * current partition is saved in 'mtddevnum'. Current partition name in | 
|  | * 'mtddevname'. | 
|  | */ | 
|  | static void index_partitions(void) | 
|  | { | 
|  | u16 mtddevnum; | 
|  | struct part_info *part; | 
|  | struct list_head *dentry; | 
|  | struct mtd_device *dev; | 
|  |  | 
|  | debug("--- index partitions ---\n"); | 
|  |  | 
|  | if (current_mtd_dev) { | 
|  | mtddevnum = 0; | 
|  | list_for_each(dentry, &devices) { | 
|  | dev = list_entry(dentry, struct mtd_device, link); | 
|  | if (dev == current_mtd_dev) { | 
|  | mtddevnum += current_mtd_partnum; | 
|  | setenv_ulong("mtddevnum", mtddevnum); | 
|  | break; | 
|  | } | 
|  | mtddevnum += dev->num_parts; | 
|  | } | 
|  |  | 
|  | part = mtd_part_info(current_mtd_dev, current_mtd_partnum); | 
|  | setenv("mtddevname", part->name); | 
|  |  | 
|  | debug("=> mtddevnum %d,\n=> mtddevname %s\n", mtddevnum, part->name); | 
|  | } else { | 
|  | setenv("mtddevnum", NULL); | 
|  | setenv("mtddevname", NULL); | 
|  |  | 
|  | debug("=> mtddevnum NULL\n=> mtddevname NULL\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Save current device and partition in environment variable 'partition'. | 
|  | */ | 
|  | static void current_save(void) | 
|  | { | 
|  | char buf[16]; | 
|  |  | 
|  | debug("--- current_save ---\n"); | 
|  |  | 
|  | if (current_mtd_dev) { | 
|  | sprintf(buf, "%s%d,%d", MTD_DEV_TYPE(current_mtd_dev->id->type), | 
|  | current_mtd_dev->id->num, current_mtd_partnum); | 
|  |  | 
|  | setenv("partition", buf); | 
|  | strncpy(last_partition, buf, 16); | 
|  |  | 
|  | debug("=> partition %s\n", buf); | 
|  | } else { | 
|  | setenv("partition", NULL); | 
|  | last_partition[0] = '\0'; | 
|  |  | 
|  | debug("=> partition NULL\n"); | 
|  | } | 
|  | index_partitions(); | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Produce a mtd_info given a type and num. | 
|  | * | 
|  | * @param type mtd type | 
|  | * @param num mtd number | 
|  | * @param mtd a pointer to an mtd_info instance (output) | 
|  | * @return 0 if device is valid, 1 otherwise | 
|  | */ | 
|  | static int get_mtd_info(u8 type, u8 num, struct mtd_info **mtd) | 
|  | { | 
|  | char mtd_dev[16]; | 
|  |  | 
|  | sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(type), num); | 
|  | *mtd = get_mtd_device_nm(mtd_dev); | 
|  | if (IS_ERR(*mtd)) { | 
|  | printf("Device %s not found!\n", mtd_dev); | 
|  | return 1; | 
|  | } | 
|  | put_mtd_device(*mtd); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Performs sanity check for supplied flash partition. | 
|  | * Table of existing MTD flash devices is searched and partition device | 
|  | * is located. Alignment with the granularity of nand erasesize is verified. | 
|  | * | 
|  | * @param id of the parent device | 
|  | * @param part partition to validate | 
|  | * @return 0 if partition is valid, 1 otherwise | 
|  | */ | 
|  | static int part_validate_eraseblock(struct mtdids *id, struct part_info *part) | 
|  | { | 
|  | struct mtd_info *mtd = NULL; | 
|  | int i, j; | 
|  | ulong start; | 
|  | u64 offset, size; | 
|  |  | 
|  | if (get_mtd_info(id->type, id->num, &mtd)) | 
|  | return 1; | 
|  |  | 
|  | part->sector_size = mtd->erasesize; | 
|  |  | 
|  | if (!mtd->numeraseregions) { | 
|  | /* | 
|  | * Only one eraseregion (NAND, OneNAND or uniform NOR), | 
|  | * checking for alignment is easy here | 
|  | */ | 
|  | offset = part->offset; | 
|  | if (do_div(offset, mtd->erasesize)) { | 
|  | printf("%s%d: partition (%s) start offset" | 
|  | "alignment incorrect\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, part->name); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | size = part->size; | 
|  | if (do_div(size, mtd->erasesize)) { | 
|  | printf("%s%d: partition (%s) size alignment incorrect\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, part->name); | 
|  | return 1; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Multiple eraseregions (non-uniform NOR), | 
|  | * checking for alignment is more complex here | 
|  | */ | 
|  |  | 
|  | /* Check start alignment */ | 
|  | for (i = 0; i < mtd->numeraseregions; i++) { | 
|  | start = mtd->eraseregions[i].offset; | 
|  | for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { | 
|  | if (part->offset == start) | 
|  | goto start_ok; | 
|  | start += mtd->eraseregions[i].erasesize; | 
|  | } | 
|  | } | 
|  |  | 
|  | printf("%s%d: partition (%s) start offset alignment incorrect\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, part->name); | 
|  | return 1; | 
|  |  | 
|  | start_ok: | 
|  |  | 
|  | /* Check end/size alignment */ | 
|  | for (i = 0; i < mtd->numeraseregions; i++) { | 
|  | start = mtd->eraseregions[i].offset; | 
|  | for (j = 0; j < mtd->eraseregions[i].numblocks; j++) { | 
|  | if ((part->offset + part->size) == start) | 
|  | goto end_ok; | 
|  | start += mtd->eraseregions[i].erasesize; | 
|  | } | 
|  | } | 
|  | /* Check last sector alignment */ | 
|  | if ((part->offset + part->size) == start) | 
|  | goto end_ok; | 
|  |  | 
|  | printf("%s%d: partition (%s) size alignment incorrect\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, part->name); | 
|  | return 1; | 
|  |  | 
|  | end_ok: | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | /** | 
|  | * Performs sanity check for supplied partition. Offset and size are | 
|  | * verified to be within valid range. Partition type is checked and | 
|  | * part_validate_eraseblock() is called with the argument of part. | 
|  | * | 
|  | * @param id of the parent device | 
|  | * @param part partition to validate | 
|  | * @return 0 if partition is valid, 1 otherwise | 
|  | */ | 
|  | static int part_validate(struct mtdids *id, struct part_info *part) | 
|  | { | 
|  | if (part->size == SIZE_REMAINING) | 
|  | part->size = id->size - part->offset; | 
|  |  | 
|  | if (part->offset > id->size) { | 
|  | printf("%s: offset %08llx beyond flash size %08llx\n", | 
|  | id->mtd_id, part->offset, id->size); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((part->offset + part->size) <= part->offset) { | 
|  | printf("%s%d: partition (%s) size too big\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, part->name); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (part->offset + part->size > id->size) { | 
|  | printf("%s: partitioning exceeds flash size\n", id->mtd_id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now we need to check if the partition starts and ends on | 
|  | * sector (eraseblock) regions | 
|  | */ | 
|  | return part_validate_eraseblock(id, part); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Delete selected partition from the partition list of the specified device. | 
|  | * | 
|  | * @param dev device to delete partition from | 
|  | * @param part partition to delete | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int part_del(struct mtd_device *dev, struct part_info *part) | 
|  | { | 
|  | u8 current_save_needed = 0; | 
|  |  | 
|  | /* if there is only one partition, remove whole device */ | 
|  | if (dev->num_parts == 1) | 
|  | return device_del(dev); | 
|  |  | 
|  | /* otherwise just delete this partition */ | 
|  |  | 
|  | if (dev == current_mtd_dev) { | 
|  | /* we are modyfing partitions for the current device, | 
|  | * update current */ | 
|  | struct part_info *curr_pi; | 
|  | curr_pi = mtd_part_info(current_mtd_dev, current_mtd_partnum); | 
|  |  | 
|  | if (curr_pi) { | 
|  | if (curr_pi == part) { | 
|  | printf("current partition deleted, resetting current to 0\n"); | 
|  | current_mtd_partnum = 0; | 
|  | } else if (part->offset <= curr_pi->offset) { | 
|  | current_mtd_partnum--; | 
|  | } | 
|  | current_save_needed = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_del(&part->link); | 
|  | free(part); | 
|  | dev->num_parts--; | 
|  |  | 
|  | if (current_save_needed > 0) | 
|  | current_save(); | 
|  | else | 
|  | index_partitions(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Delete all partitions from parts head list, free memory. | 
|  | * | 
|  | * @param head list of partitions to delete | 
|  | */ | 
|  | static void part_delall(struct list_head *head) | 
|  | { | 
|  | struct list_head *entry, *n; | 
|  | struct part_info *part_tmp; | 
|  |  | 
|  | /* clean tmp_list and free allocated memory */ | 
|  | list_for_each_safe(entry, n, head) { | 
|  | part_tmp = list_entry(entry, struct part_info, link); | 
|  |  | 
|  | list_del(entry); | 
|  | free(part_tmp); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Add new partition to the supplied partition list. Make sure partitions are | 
|  | * sorted by offset in ascending order. | 
|  | * | 
|  | * @param head list this partition is to be added to | 
|  | * @param new partition to be added | 
|  | */ | 
|  | static int part_sort_add(struct mtd_device *dev, struct part_info *part) | 
|  | { | 
|  | struct list_head *entry; | 
|  | struct part_info *new_pi, *curr_pi; | 
|  |  | 
|  | /* link partition to parrent dev */ | 
|  | part->dev = dev; | 
|  |  | 
|  | if (list_empty(&dev->parts)) { | 
|  | debug("part_sort_add: list empty\n"); | 
|  | list_add(&part->link, &dev->parts); | 
|  | dev->num_parts++; | 
|  | index_partitions(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | new_pi = list_entry(&part->link, struct part_info, link); | 
|  |  | 
|  | /* get current partition info if we are updating current device */ | 
|  | curr_pi = NULL; | 
|  | if (dev == current_mtd_dev) | 
|  | curr_pi = mtd_part_info(current_mtd_dev, current_mtd_partnum); | 
|  |  | 
|  | list_for_each(entry, &dev->parts) { | 
|  | struct part_info *pi; | 
|  |  | 
|  | pi = list_entry(entry, struct part_info, link); | 
|  |  | 
|  | /* be compliant with kernel cmdline, allow only one partition at offset zero */ | 
|  | if ((new_pi->offset == pi->offset) && (pi->offset == 0)) { | 
|  | printf("cannot add second partition at offset 0\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (new_pi->offset <= pi->offset) { | 
|  | list_add_tail(&part->link, entry); | 
|  | dev->num_parts++; | 
|  |  | 
|  | if (curr_pi && (pi->offset <= curr_pi->offset)) { | 
|  | /* we are modyfing partitions for the current | 
|  | * device, update current */ | 
|  | current_mtd_partnum++; | 
|  | current_save(); | 
|  | } else { | 
|  | index_partitions(); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_add_tail(&part->link, &dev->parts); | 
|  | dev->num_parts++; | 
|  | index_partitions(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Add provided partition to the partition list of a given device. | 
|  | * | 
|  | * @param dev device to which partition is added | 
|  | * @param part partition to be added | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int part_add(struct mtd_device *dev, struct part_info *part) | 
|  | { | 
|  | /* verify alignment and size */ | 
|  | if (part_validate(dev->id, part) != 0) | 
|  | return 1; | 
|  |  | 
|  | /* partition is ok, add it to the list */ | 
|  | if (part_sort_add(dev, part) != 0) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Parse one partition definition, allocate memory and return pointer to this | 
|  | * location in retpart. | 
|  | * | 
|  | * @param partdef pointer to the partition definition string i.e. <part-def> | 
|  | * @param ret output pointer to next char after parse completes (output) | 
|  | * @param retpart pointer to the allocated partition (output) | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int part_parse(const char *const partdef, const char **ret, struct part_info **retpart) | 
|  | { | 
|  | struct part_info *part; | 
|  | u64 size; | 
|  | u64 offset; | 
|  | const char *name; | 
|  | int name_len; | 
|  | unsigned int mask_flags; | 
|  | const char *p; | 
|  |  | 
|  | p = partdef; | 
|  | *retpart = NULL; | 
|  | *ret = NULL; | 
|  |  | 
|  | /* fetch the partition size */ | 
|  | if (*p == '-') { | 
|  | /* assign all remaining space to this partition */ | 
|  | debug("'-': remaining size assigned\n"); | 
|  | size = SIZE_REMAINING; | 
|  | p++; | 
|  | } else { | 
|  | size = memsize_parse(p, &p); | 
|  | if (size < MIN_PART_SIZE) { | 
|  | printf("partition size too small (%llx)\n", size); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* check for offset */ | 
|  | offset = OFFSET_NOT_SPECIFIED; | 
|  | if (*p == '@') { | 
|  | p++; | 
|  | offset = memsize_parse(p, &p); | 
|  | } | 
|  |  | 
|  | /* now look for the name */ | 
|  | if (*p == '(') { | 
|  | name = ++p; | 
|  | if ((p = strchr(name, ')')) == NULL) { | 
|  | printf("no closing ) found in partition name\n"); | 
|  | return 1; | 
|  | } | 
|  | name_len = p - name + 1; | 
|  | if ((name_len - 1) == 0) { | 
|  | printf("empty partition name\n"); | 
|  | return 1; | 
|  | } | 
|  | p++; | 
|  | } else { | 
|  | /* 0x00000000@0x00000000 */ | 
|  | name_len = 22; | 
|  | name = NULL; | 
|  | } | 
|  |  | 
|  | /* test for options */ | 
|  | mask_flags = 0; | 
|  | if (strncmp(p, "ro", 2) == 0) { | 
|  | mask_flags |= MTD_WRITEABLE_CMD; | 
|  | p += 2; | 
|  | } | 
|  |  | 
|  | /* check for next partition definition */ | 
|  | if (*p == ',') { | 
|  | if (size == SIZE_REMAINING) { | 
|  | *ret = NULL; | 
|  | printf("no partitions allowed after a fill-up partition\n"); | 
|  | return 1; | 
|  | } | 
|  | *ret = ++p; | 
|  | } else if ((*p == ';') || (*p == '\0')) { | 
|  | *ret = p; | 
|  | } else { | 
|  | printf("unexpected character '%c' at the end of partition\n", *p); | 
|  | *ret = NULL; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /*  allocate memory */ | 
|  | part = (struct part_info *)malloc(sizeof(struct part_info) + name_len); | 
|  | if (!part) { | 
|  | printf("out of memory\n"); | 
|  | return 1; | 
|  | } | 
|  | memset(part, 0, sizeof(struct part_info) + name_len); | 
|  | part->size = size; | 
|  | part->offset = offset; | 
|  | part->mask_flags = mask_flags; | 
|  | part->name = (char *)(part + 1); | 
|  |  | 
|  | if (name) { | 
|  | /* copy user provided name */ | 
|  | strncpy(part->name, name, name_len - 1); | 
|  | part->auto_name = 0; | 
|  | } else { | 
|  | /* auto generated name in form of size@offset */ | 
|  | sprintf(part->name, "0x%08llx@0x%08llx", size, offset); | 
|  | part->auto_name = 1; | 
|  | } | 
|  |  | 
|  | part->name[name_len - 1] = '\0'; | 
|  | INIT_LIST_HEAD(&part->link); | 
|  |  | 
|  | debug("+ partition: name %-22s size 0x%08llx offset 0x%08llx mask flags %d\n", | 
|  | part->name, part->size, | 
|  | part->offset, part->mask_flags); | 
|  |  | 
|  | *retpart = part; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Check device number to be within valid range for given device type. | 
|  | * | 
|  | * @param type mtd type | 
|  | * @param num mtd number | 
|  | * @param size a pointer to the size of the mtd device (output) | 
|  | * @return 0 if device is valid, 1 otherwise | 
|  | */ | 
|  | static int mtd_device_validate(u8 type, u8 num, u64 *size) | 
|  | { | 
|  | struct mtd_info *mtd = NULL; | 
|  |  | 
|  | if (get_mtd_info(type, num, &mtd)) | 
|  | return 1; | 
|  |  | 
|  | *size = mtd->size; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Delete all mtd devices from a supplied devices list, free memory allocated for | 
|  | * each device and delete all device partitions. | 
|  | * | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int device_delall(struct list_head *head) | 
|  | { | 
|  | struct list_head *entry, *n; | 
|  | struct mtd_device *dev_tmp; | 
|  |  | 
|  | /* clean devices list */ | 
|  | list_for_each_safe(entry, n, head) { | 
|  | dev_tmp = list_entry(entry, struct mtd_device, link); | 
|  | list_del(entry); | 
|  | part_delall(&dev_tmp->parts); | 
|  | free(dev_tmp); | 
|  | } | 
|  | INIT_LIST_HEAD(&devices); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * If provided device exists it's partitions are deleted, device is removed | 
|  | * from device list and device memory is freed. | 
|  | * | 
|  | * @param dev device to be deleted | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int device_del(struct mtd_device *dev) | 
|  | { | 
|  | part_delall(&dev->parts); | 
|  | list_del(&dev->link); | 
|  | free(dev); | 
|  |  | 
|  | if (dev == current_mtd_dev) { | 
|  | /* we just deleted current device */ | 
|  | if (list_empty(&devices)) { | 
|  | current_mtd_dev = NULL; | 
|  | } else { | 
|  | /* reset first partition from first dev from the | 
|  | * devices list as current */ | 
|  | current_mtd_dev = list_entry(devices.next, struct mtd_device, link); | 
|  | current_mtd_partnum = 0; | 
|  | } | 
|  | current_save(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | index_partitions(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Search global device list and return pointer to the device of type and num | 
|  | * specified. | 
|  | * | 
|  | * @param type device type | 
|  | * @param num device number | 
|  | * @return NULL if requested device does not exist | 
|  | */ | 
|  | struct mtd_device *device_find(u8 type, u8 num) | 
|  | { | 
|  | struct list_head *entry; | 
|  | struct mtd_device *dev_tmp; | 
|  |  | 
|  | list_for_each(entry, &devices) { | 
|  | dev_tmp = list_entry(entry, struct mtd_device, link); | 
|  |  | 
|  | if ((dev_tmp->id->type == type) && (dev_tmp->id->num == num)) | 
|  | return dev_tmp; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Add specified device to the global device list. | 
|  | * | 
|  | * @param dev device to be added | 
|  | */ | 
|  | static void device_add(struct mtd_device *dev) | 
|  | { | 
|  | u8 current_save_needed = 0; | 
|  |  | 
|  | if (list_empty(&devices)) { | 
|  | current_mtd_dev = dev; | 
|  | current_mtd_partnum = 0; | 
|  | current_save_needed = 1; | 
|  | } | 
|  |  | 
|  | list_add_tail(&dev->link, &devices); | 
|  |  | 
|  | if (current_save_needed > 0) | 
|  | current_save(); | 
|  | else | 
|  | index_partitions(); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Parse device type, name and mtd-id. If syntax is ok allocate memory and | 
|  | * return pointer to the device structure. | 
|  | * | 
|  | * @param mtd_dev pointer to the device definition string i.e. <mtd-dev> | 
|  | * @param ret output pointer to next char after parse completes (output) | 
|  | * @param retdev pointer to the allocated device (output) | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int device_parse(const char *const mtd_dev, const char **ret, struct mtd_device **retdev) | 
|  | { | 
|  | struct mtd_device *dev; | 
|  | struct part_info *part; | 
|  | struct mtdids *id; | 
|  | const char *mtd_id; | 
|  | unsigned int mtd_id_len; | 
|  | const char *p; | 
|  | const char *pend; | 
|  | LIST_HEAD(tmp_list); | 
|  | struct list_head *entry, *n; | 
|  | u16 num_parts; | 
|  | u64 offset; | 
|  | int err = 1; | 
|  |  | 
|  | debug("===device_parse===\n"); | 
|  |  | 
|  | assert(retdev); | 
|  | *retdev = NULL; | 
|  |  | 
|  | if (ret) | 
|  | *ret = NULL; | 
|  |  | 
|  | /* fetch <mtd-id> */ | 
|  | mtd_id = p = mtd_dev; | 
|  | if (!(p = strchr(mtd_id, ':'))) { | 
|  | printf("no <mtd-id> identifier\n"); | 
|  | return 1; | 
|  | } | 
|  | mtd_id_len = p - mtd_id + 1; | 
|  | p++; | 
|  |  | 
|  | /* verify if we have a valid device specified */ | 
|  | if ((id = id_find_by_mtd_id(mtd_id, mtd_id_len - 1)) == NULL) { | 
|  | printf("invalid mtd device '%.*s'\n", mtd_id_len - 1, mtd_id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #ifdef DEBUG | 
|  | pend = strchr(p, ';'); | 
|  | #endif | 
|  | debug("dev type = %d (%s), dev num = %d, mtd-id = %s\n", | 
|  | id->type, MTD_DEV_TYPE(id->type), | 
|  | id->num, id->mtd_id); | 
|  | debug("parsing partitions %.*s\n", (int)(pend ? pend - p : strlen(p)), p); | 
|  |  | 
|  |  | 
|  | /* parse partitions */ | 
|  | num_parts = 0; | 
|  |  | 
|  | offset = 0; | 
|  | if ((dev = device_find(id->type, id->num)) != NULL) { | 
|  | /* if device already exists start at the end of the last partition */ | 
|  | part = list_entry(dev->parts.prev, struct part_info, link); | 
|  | offset = part->offset + part->size; | 
|  | } | 
|  |  | 
|  | while (p && (*p != '\0') && (*p != ';')) { | 
|  | err = 1; | 
|  | if ((part_parse(p, &p, &part) != 0) || (!part)) | 
|  | break; | 
|  |  | 
|  | /* calculate offset when not specified */ | 
|  | if (part->offset == OFFSET_NOT_SPECIFIED) | 
|  | part->offset = offset; | 
|  | else | 
|  | offset = part->offset; | 
|  |  | 
|  | /* verify alignment and size */ | 
|  | if (part_validate(id, part) != 0) | 
|  | break; | 
|  |  | 
|  | offset += part->size; | 
|  |  | 
|  | /* partition is ok, add it to the list */ | 
|  | list_add_tail(&part->link, &tmp_list); | 
|  | num_parts++; | 
|  | err = 0; | 
|  | } | 
|  | if (err == 1) { | 
|  | part_delall(&tmp_list); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (num_parts == 0) { | 
|  | printf("no partitions for device %s%d (%s)\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, id->mtd_id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | debug("\ntotal partitions: %d\n", num_parts); | 
|  |  | 
|  | /* check for next device presence */ | 
|  | if (p) { | 
|  | if (*p == ';') { | 
|  | if (ret) | 
|  | *ret = ++p; | 
|  | } else if (*p == '\0') { | 
|  | if (ret) | 
|  | *ret = p; | 
|  | } else { | 
|  | printf("unexpected character '%c' at the end of device\n", *p); | 
|  | if (ret) | 
|  | *ret = NULL; | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* allocate memory for mtd_device structure */ | 
|  | if ((dev = (struct mtd_device *)malloc(sizeof(struct mtd_device))) == NULL) { | 
|  | printf("out of memory\n"); | 
|  | return 1; | 
|  | } | 
|  | memset(dev, 0, sizeof(struct mtd_device)); | 
|  | dev->id = id; | 
|  | dev->num_parts = 0; /* part_sort_add increments num_parts */ | 
|  | INIT_LIST_HEAD(&dev->parts); | 
|  | INIT_LIST_HEAD(&dev->link); | 
|  |  | 
|  | /* move partitions from tmp_list to dev->parts */ | 
|  | list_for_each_safe(entry, n, &tmp_list) { | 
|  | part = list_entry(entry, struct part_info, link); | 
|  | list_del(entry); | 
|  | if (part_sort_add(dev, part) != 0) { | 
|  | device_del(dev); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | *retdev = dev; | 
|  |  | 
|  | debug("===\n\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Initialize global device list. | 
|  | * | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int mtd_devices_init(void) | 
|  | { | 
|  | last_parts[0] = '\0'; | 
|  | current_mtd_dev = NULL; | 
|  | current_save(); | 
|  |  | 
|  | return device_delall(&devices); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Search global mtdids list and find id of requested type and number. | 
|  | * | 
|  | * @return pointer to the id if it exists, NULL otherwise | 
|  | */ | 
|  | static struct mtdids* id_find(u8 type, u8 num) | 
|  | { | 
|  | struct list_head *entry; | 
|  | struct mtdids *id; | 
|  |  | 
|  | list_for_each(entry, &mtdids) { | 
|  | id = list_entry(entry, struct mtdids, link); | 
|  |  | 
|  | if ((id->type == type) && (id->num == num)) | 
|  | return id; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Search global mtdids list and find id of a requested mtd_id. | 
|  | * | 
|  | * Note: first argument is not null terminated. | 
|  | * | 
|  | * @param mtd_id string containing requested mtd_id | 
|  | * @param mtd_id_len length of supplied mtd_id | 
|  | * @return pointer to the id if it exists, NULL otherwise | 
|  | */ | 
|  | static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_len) | 
|  | { | 
|  | struct list_head *entry; | 
|  | struct mtdids *id; | 
|  |  | 
|  | debug("--- id_find_by_mtd_id: '%.*s' (len = %d)\n", | 
|  | mtd_id_len, mtd_id, mtd_id_len); | 
|  |  | 
|  | list_for_each(entry, &mtdids) { | 
|  | id = list_entry(entry, struct mtdids, link); | 
|  |  | 
|  | debug("entry: '%s' (len = %zu)\n", | 
|  | id->mtd_id, strlen(id->mtd_id)); | 
|  |  | 
|  | if (mtd_id_len != strlen(id->mtd_id)) | 
|  | continue; | 
|  | if (strncmp(id->mtd_id, mtd_id, mtd_id_len) == 0) | 
|  | return id; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Parse device id string <dev-id> := 'nand'|'nor'|'onenand'<dev-num>, | 
|  | * return device type and number. | 
|  | * | 
|  | * @param id string describing device id | 
|  | * @param ret_id output pointer to next char after parse completes (output) | 
|  | * @param dev_type parsed device type (output) | 
|  | * @param dev_num parsed device number (output) | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, | 
|  | u8 *dev_num) | 
|  | { | 
|  | const char *p = id; | 
|  |  | 
|  | *dev_type = 0; | 
|  | if (strncmp(p, "nand", 4) == 0) { | 
|  | *dev_type = MTD_DEV_TYPE_NAND; | 
|  | p += 4; | 
|  | } else if (strncmp(p, "nor", 3) == 0) { | 
|  | *dev_type = MTD_DEV_TYPE_NOR; | 
|  | p += 3; | 
|  | } else if (strncmp(p, "onenand", 7) == 0) { | 
|  | *dev_type = MTD_DEV_TYPE_ONENAND; | 
|  | p += 7; | 
|  | } else { | 
|  | printf("incorrect device type in %s\n", id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (!isdigit(*p)) { | 
|  | printf("incorrect device number in %s\n", id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | *dev_num = simple_strtoul(p, (char **)&p, 0); | 
|  | if (ret_id) | 
|  | *ret_id = p; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Process all devices and generate corresponding mtdparts string describing | 
|  | * all partitions on all devices. | 
|  | * | 
|  | * @param buf output buffer holding generated mtdparts string (output) | 
|  | * @param buflen buffer size | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int generate_mtdparts(char *buf, u32 buflen) | 
|  | { | 
|  | struct list_head *pentry, *dentry; | 
|  | struct mtd_device *dev; | 
|  | struct part_info *part, *prev_part; | 
|  | char *p = buf; | 
|  | char tmpbuf[32]; | 
|  | u64 size, offset; | 
|  | u32 len, part_cnt; | 
|  | u32 maxlen = buflen - 1; | 
|  |  | 
|  | debug("--- generate_mtdparts ---\n"); | 
|  |  | 
|  | if (list_empty(&devices)) { | 
|  | buf[0] = '\0'; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | sprintf(p, "mtdparts="); | 
|  | p += 9; | 
|  |  | 
|  | list_for_each(dentry, &devices) { | 
|  | dev = list_entry(dentry, struct mtd_device, link); | 
|  |  | 
|  | /* copy mtd_id */ | 
|  | len = strlen(dev->id->mtd_id) + 1; | 
|  | if (len > maxlen) | 
|  | goto cleanup; | 
|  | memcpy(p, dev->id->mtd_id, len - 1); | 
|  | p += len - 1; | 
|  | *(p++) = ':'; | 
|  | maxlen -= len; | 
|  |  | 
|  | /* format partitions */ | 
|  | prev_part = NULL; | 
|  | part_cnt = 0; | 
|  | list_for_each(pentry, &dev->parts) { | 
|  | part = list_entry(pentry, struct part_info, link); | 
|  | size = part->size; | 
|  | offset = part->offset; | 
|  | part_cnt++; | 
|  |  | 
|  | /* partition size */ | 
|  | memsize_format(tmpbuf, size); | 
|  | len = strlen(tmpbuf); | 
|  | if (len > maxlen) | 
|  | goto cleanup; | 
|  | memcpy(p, tmpbuf, len); | 
|  | p += len; | 
|  | maxlen -= len; | 
|  |  | 
|  |  | 
|  | /* add offset only when there is a gap between | 
|  | * partitions */ | 
|  | if ((!prev_part && (offset != 0)) || | 
|  | (prev_part && ((prev_part->offset + prev_part->size) != part->offset))) { | 
|  |  | 
|  | memsize_format(tmpbuf, offset); | 
|  | len = strlen(tmpbuf) + 1; | 
|  | if (len > maxlen) | 
|  | goto cleanup; | 
|  | *(p++) = '@'; | 
|  | memcpy(p, tmpbuf, len - 1); | 
|  | p += len - 1; | 
|  | maxlen -= len; | 
|  | } | 
|  |  | 
|  | /* copy name only if user supplied */ | 
|  | if(!part->auto_name) { | 
|  | len = strlen(part->name) + 2; | 
|  | if (len > maxlen) | 
|  | goto cleanup; | 
|  |  | 
|  | *(p++) = '('; | 
|  | memcpy(p, part->name, len - 2); | 
|  | p += len - 2; | 
|  | *(p++) = ')'; | 
|  | maxlen -= len; | 
|  | } | 
|  |  | 
|  | /* ro mask flag */ | 
|  | if (part->mask_flags && MTD_WRITEABLE_CMD) { | 
|  | len = 2; | 
|  | if (len > maxlen) | 
|  | goto cleanup; | 
|  | *(p++) = 'r'; | 
|  | *(p++) = 'o'; | 
|  | maxlen -= 2; | 
|  | } | 
|  |  | 
|  | /* print ',' separator if there are other partitions | 
|  | * following */ | 
|  | if (dev->num_parts > part_cnt) { | 
|  | if (1 > maxlen) | 
|  | goto cleanup; | 
|  | *(p++) = ','; | 
|  | maxlen--; | 
|  | } | 
|  | prev_part = part; | 
|  | } | 
|  | /* print ';' separator if there are other devices following */ | 
|  | if (dentry->next != &devices) { | 
|  | if (1 > maxlen) | 
|  | goto cleanup; | 
|  | *(p++) = ';'; | 
|  | maxlen--; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* we still have at least one char left, as we decremented maxlen at | 
|  | * the begining */ | 
|  | *p = '\0'; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | cleanup: | 
|  | last_parts[0] = '\0'; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Call generate_mtdparts to process all devices and generate corresponding | 
|  | * mtdparts string, save it in mtdparts environment variable. | 
|  | * | 
|  | * @param buf output buffer holding generated mtdparts string (output) | 
|  | * @param buflen buffer size | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int generate_mtdparts_save(char *buf, u32 buflen) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = generate_mtdparts(buf, buflen); | 
|  |  | 
|  | if ((buf[0] != '\0') && (ret == 0)) | 
|  | setenv("mtdparts", buf); | 
|  | else | 
|  | setenv("mtdparts", NULL); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) | 
|  | /** | 
|  | * Get the net size (w/o bad blocks) of the given partition. | 
|  | * | 
|  | * @param mtd the mtd info | 
|  | * @param part the partition | 
|  | * @return the calculated net size of this partition | 
|  | */ | 
|  | static uint64_t net_part_size(struct mtd_info *mtd, struct part_info *part) | 
|  | { | 
|  | uint64_t i, net_size = 0; | 
|  |  | 
|  | if (!mtd->block_isbad) | 
|  | return part->size; | 
|  |  | 
|  | for (i = 0; i < part->size; i += mtd->erasesize) { | 
|  | if (!mtd->block_isbad(mtd, part->offset + i)) | 
|  | net_size += mtd->erasesize; | 
|  | } | 
|  |  | 
|  | return net_size; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void print_partition_table(void) | 
|  | { | 
|  | struct list_head *dentry, *pentry; | 
|  | struct part_info *part; | 
|  | struct mtd_device *dev; | 
|  | int part_num; | 
|  |  | 
|  | list_for_each(dentry, &devices) { | 
|  | dev = list_entry(dentry, struct mtd_device, link); | 
|  | /* list partitions for given device */ | 
|  | part_num = 0; | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) | 
|  | struct mtd_info *mtd; | 
|  |  | 
|  | if (get_mtd_info(dev->id->type, dev->id->num, &mtd)) | 
|  | return; | 
|  |  | 
|  | printf("\ndevice %s%d <%s>, # parts = %d\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num, | 
|  | dev->id->mtd_id, dev->num_parts); | 
|  | printf(" #: name\t\tsize\t\tnet size\toffset\t\tmask_flags\n"); | 
|  |  | 
|  | list_for_each(pentry, &dev->parts) { | 
|  | u32 net_size; | 
|  | char *size_note; | 
|  |  | 
|  | part = list_entry(pentry, struct part_info, link); | 
|  | net_size = net_part_size(mtd, part); | 
|  | size_note = part->size == net_size ? " " : " (!)"; | 
|  | printf("%2d: %-20s0x%08x\t0x%08x%s\t0x%08x\t%d\n", | 
|  | part_num, part->name, part->size, | 
|  | net_size, size_note, part->offset, | 
|  | part->mask_flags); | 
|  | #else /* !defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */ | 
|  | printf("\ndevice %s%d <%s>, # parts = %d\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num, | 
|  | dev->id->mtd_id, dev->num_parts); | 
|  | printf(" #: name\t\tsize\t\toffset\t\tmask_flags\n"); | 
|  |  | 
|  | list_for_each(pentry, &dev->parts) { | 
|  | part = list_entry(pentry, struct part_info, link); | 
|  | printf("%2d: %-20s0x%08llx\t0x%08llx\t%d\n", | 
|  | part_num, part->name, part->size, | 
|  | part->offset, part->mask_flags); | 
|  | #endif /* defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */ | 
|  | part_num++; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (list_empty(&devices)) | 
|  | printf("no partitions defined\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Format and print out a partition list for each device from global device | 
|  | * list. | 
|  | */ | 
|  | static void list_partitions(void) | 
|  | { | 
|  | struct part_info *part; | 
|  |  | 
|  | debug("\n---list_partitions---\n"); | 
|  | print_partition_table(); | 
|  |  | 
|  | /* current_mtd_dev is not NULL only when we have non empty device list */ | 
|  | if (current_mtd_dev) { | 
|  | part = mtd_part_info(current_mtd_dev, current_mtd_partnum); | 
|  | if (part) { | 
|  | printf("\nactive partition: %s%d,%d - (%s) 0x%08llx @ 0x%08llx\n", | 
|  | MTD_DEV_TYPE(current_mtd_dev->id->type), | 
|  | current_mtd_dev->id->num, current_mtd_partnum, | 
|  | part->name, part->size, part->offset); | 
|  | } else { | 
|  | printf("could not get current partition info\n\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | printf("\ndefaults:\n"); | 
|  | printf("mtdids  : %s\n", | 
|  | mtdids_default ? mtdids_default : "none"); | 
|  | /* | 
|  | * Using printf() here results in printbuffer overflow | 
|  | * if default mtdparts string is greater than console | 
|  | * printbuffer. Use puts() to prevent system crashes. | 
|  | */ | 
|  | puts("mtdparts: "); | 
|  | puts(mtdparts_default ? mtdparts_default : "none"); | 
|  | puts("\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Given partition identifier in form of <dev_type><dev_num>,<part_num> find | 
|  | * corresponding device and verify partition number. | 
|  | * | 
|  | * @param id string describing device and partition or partition name | 
|  | * @param dev pointer to the requested device (output) | 
|  | * @param part_num verified partition number (output) | 
|  | * @param part pointer to requested partition (output) | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | int find_dev_and_part(const char *id, struct mtd_device **dev, | 
|  | u8 *part_num, struct part_info **part) | 
|  | { | 
|  | struct list_head *dentry, *pentry; | 
|  | u8 type, dnum, pnum; | 
|  | const char *p; | 
|  |  | 
|  | debug("--- find_dev_and_part ---\nid = %s\n", id); | 
|  |  | 
|  | list_for_each(dentry, &devices) { | 
|  | *part_num = 0; | 
|  | *dev = list_entry(dentry, struct mtd_device, link); | 
|  | list_for_each(pentry, &(*dev)->parts) { | 
|  | *part = list_entry(pentry, struct part_info, link); | 
|  | if (strcmp((*part)->name, id) == 0) | 
|  | return 0; | 
|  | (*part_num)++; | 
|  | } | 
|  | } | 
|  |  | 
|  | p = id; | 
|  | *dev = NULL; | 
|  | *part = NULL; | 
|  | *part_num = 0; | 
|  |  | 
|  | if (mtd_id_parse(p, &p, &type, &dnum) != 0) | 
|  | return 1; | 
|  |  | 
|  | if ((*p++ != ',') || (*p == '\0')) { | 
|  | printf("no partition number specified\n"); | 
|  | return 1; | 
|  | } | 
|  | pnum = simple_strtoul(p, (char **)&p, 0); | 
|  | if (*p != '\0') { | 
|  | printf("unexpected trailing character '%c'\n", *p); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((*dev = device_find(type, dnum)) == NULL) { | 
|  | printf("no such device %s%d\n", MTD_DEV_TYPE(type), dnum); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if ((*part = mtd_part_info(*dev, pnum)) == NULL) { | 
|  | printf("no such partition\n"); | 
|  | *dev = NULL; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | *part_num = pnum; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Find and delete partition. For partition id format see find_dev_and_part(). | 
|  | * | 
|  | * @param id string describing device and partition | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int delete_partition(const char *id) | 
|  | { | 
|  | u8 pnum; | 
|  | struct mtd_device *dev; | 
|  | struct part_info *part; | 
|  |  | 
|  | if (find_dev_and_part(id, &dev, &pnum, &part) == 0) { | 
|  |  | 
|  | debug("delete_partition: device = %s%d, partition %d = (%s) 0x%08llx@0x%08llx\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num, pnum, | 
|  | part->name, part->size, part->offset); | 
|  |  | 
|  | if (part_del(dev, part) != 0) | 
|  | return 1; | 
|  |  | 
|  | if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { | 
|  | printf("generated mtdparts too long, resetting to null\n"); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | printf("partition %s not found\n", id); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | /** | 
|  | * Increase the size of the given partition so that it's net size is at least | 
|  | * as large as the size member and such that the next partition would start on a | 
|  | * good block if it were adjacent to this partition. | 
|  | * | 
|  | * @param mtd the mtd device | 
|  | * @param part the partition | 
|  | * @param next_offset pointer to the offset of the next partition after this | 
|  | *                    partition's size has been modified (output) | 
|  | */ | 
|  | static void spread_partition(struct mtd_info *mtd, struct part_info *part, | 
|  | uint64_t *next_offset) | 
|  | { | 
|  | uint64_t net_size, padding_size = 0; | 
|  | int truncated; | 
|  |  | 
|  | mtd_get_len_incl_bad(mtd, part->offset, part->size, &net_size, | 
|  | &truncated); | 
|  |  | 
|  | /* | 
|  | * Absorb bad blocks immediately following this | 
|  | * partition also into the partition, such that | 
|  | * the next partition starts with a good block. | 
|  | */ | 
|  | if (!truncated) { | 
|  | mtd_get_len_incl_bad(mtd, part->offset + net_size, | 
|  | mtd->erasesize, &padding_size, &truncated); | 
|  | if (truncated) | 
|  | padding_size = 0; | 
|  | else | 
|  | padding_size -= mtd->erasesize; | 
|  | } | 
|  |  | 
|  | if (truncated) { | 
|  | printf("truncated partition %s to %lld bytes\n", part->name, | 
|  | (uint64_t) net_size + padding_size); | 
|  | } | 
|  |  | 
|  | part->size = net_size + padding_size; | 
|  | *next_offset = part->offset + part->size; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Adjust all of the partition sizes, such that all partitions are at least | 
|  | * as big as their mtdparts environment variable sizes and they each start | 
|  | * on a good block. | 
|  | * | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int spread_partitions(void) | 
|  | { | 
|  | struct list_head *dentry, *pentry; | 
|  | struct mtd_device *dev; | 
|  | struct part_info *part; | 
|  | struct mtd_info *mtd; | 
|  | int part_num; | 
|  | uint64_t cur_offs; | 
|  |  | 
|  | list_for_each(dentry, &devices) { | 
|  | dev = list_entry(dentry, struct mtd_device, link); | 
|  |  | 
|  | if (get_mtd_info(dev->id->type, dev->id->num, &mtd)) | 
|  | return 1; | 
|  |  | 
|  | part_num = 0; | 
|  | cur_offs = 0; | 
|  | list_for_each(pentry, &dev->parts) { | 
|  | part = list_entry(pentry, struct part_info, link); | 
|  |  | 
|  | debug("spread_partitions: device = %s%d, partition %d =" | 
|  | " (%s) 0x%08x@0x%08x\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num, | 
|  | part_num, part->name, part->size, | 
|  | part->offset); | 
|  |  | 
|  | if (cur_offs > part->offset) | 
|  | part->offset = cur_offs; | 
|  |  | 
|  | spread_partition(mtd, part, &cur_offs); | 
|  |  | 
|  | part_num++; | 
|  | } | 
|  | } | 
|  |  | 
|  | index_partitions(); | 
|  |  | 
|  | if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { | 
|  | printf("generated mtdparts too long, resetting to null\n"); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #endif /* CONFIG_CMD_MTDPARTS_SPREAD */ | 
|  |  | 
|  | /** | 
|  | * Accept character string describing mtd partitions and call device_parse() | 
|  | * for each entry. Add created devices to the global devices list. | 
|  | * | 
|  | * @param mtdparts string specifing mtd partitions | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int parse_mtdparts(const char *const mtdparts) | 
|  | { | 
|  | const char *p = mtdparts; | 
|  | struct mtd_device *dev; | 
|  | int err = 1; | 
|  | char tmp_parts[MTDPARTS_MAXLEN]; | 
|  |  | 
|  | debug("\n---parse_mtdparts---\nmtdparts = %s\n\n", p); | 
|  |  | 
|  | /* delete all devices and partitions */ | 
|  | if (mtd_devices_init() != 0) { | 
|  | printf("could not initialise device list\n"); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* re-read 'mtdparts' variable, mtd_devices_init may be updating env */ | 
|  | if (gd->flags & GD_FLG_ENV_READY) { | 
|  | p = getenv("mtdparts"); | 
|  | } else { | 
|  | p = tmp_parts; | 
|  | getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN); | 
|  | } | 
|  |  | 
|  | if (strncmp(p, "mtdparts=", 9) != 0) { | 
|  | printf("mtdparts variable doesn't start with 'mtdparts='\n"); | 
|  | return err; | 
|  | } | 
|  | p += 9; | 
|  |  | 
|  | while (p && (*p != '\0')) { | 
|  | err = 1; | 
|  | if ((device_parse(p, &p, &dev) != 0) || (!dev)) | 
|  | break; | 
|  |  | 
|  | debug("+ device: %s\t%d\t%s\n", MTD_DEV_TYPE(dev->id->type), | 
|  | dev->id->num, dev->id->mtd_id); | 
|  |  | 
|  | /* check if parsed device is already on the list */ | 
|  | if (device_find(dev->id->type, dev->id->num) != NULL) { | 
|  | printf("device %s%d redefined, please correct mtdparts variable\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num); | 
|  | break; | 
|  | } | 
|  |  | 
|  | list_add_tail(&dev->link, &devices); | 
|  | err = 0; | 
|  | } | 
|  | if (err == 1) { | 
|  | device_delall(&devices); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Parse provided string describing mtdids mapping (see file header for mtdids | 
|  | * variable format). Allocate memory for each entry and add all found entries | 
|  | * to the global mtdids list. | 
|  | * | 
|  | * @param ids mapping string | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int parse_mtdids(const char *const ids) | 
|  | { | 
|  | const char *p = ids; | 
|  | const char *mtd_id; | 
|  | int mtd_id_len; | 
|  | struct mtdids *id; | 
|  | struct list_head *entry, *n; | 
|  | struct mtdids *id_tmp; | 
|  | u8 type, num; | 
|  | u64 size; | 
|  | int ret = 1; | 
|  |  | 
|  | debug("\n---parse_mtdids---\nmtdids = %s\n\n", ids); | 
|  |  | 
|  | /* clean global mtdids list */ | 
|  | list_for_each_safe(entry, n, &mtdids) { | 
|  | id_tmp = list_entry(entry, struct mtdids, link); | 
|  | debug("mtdids del: %d %d\n", id_tmp->type, id_tmp->num); | 
|  | list_del(entry); | 
|  | free(id_tmp); | 
|  | } | 
|  | last_ids[0] = '\0'; | 
|  | INIT_LIST_HEAD(&mtdids); | 
|  |  | 
|  | while(p && (*p != '\0')) { | 
|  |  | 
|  | ret = 1; | 
|  | /* parse 'nor'|'nand'|'onenand'<dev-num> */ | 
|  | if (mtd_id_parse(p, &p, &type, &num) != 0) | 
|  | break; | 
|  |  | 
|  | if (*p != '=') { | 
|  | printf("mtdids: incorrect <dev-num>\n"); | 
|  | break; | 
|  | } | 
|  | p++; | 
|  |  | 
|  | /* check if requested device exists */ | 
|  | if (mtd_device_validate(type, num, &size) != 0) | 
|  | return 1; | 
|  |  | 
|  | /* locate <mtd-id> */ | 
|  | mtd_id = p; | 
|  | if ((p = strchr(mtd_id, ',')) != NULL) { | 
|  | mtd_id_len = p - mtd_id + 1; | 
|  | p++; | 
|  | } else { | 
|  | mtd_id_len = strlen(mtd_id) + 1; | 
|  | } | 
|  | if (mtd_id_len == 0) { | 
|  | printf("mtdids: no <mtd-id> identifier\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* check if this id is already on the list */ | 
|  | int double_entry = 0; | 
|  | list_for_each(entry, &mtdids) { | 
|  | id_tmp = list_entry(entry, struct mtdids, link); | 
|  | if ((id_tmp->type == type) && (id_tmp->num == num)) { | 
|  | double_entry = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (double_entry) { | 
|  | printf("device id %s%d redefined, please correct mtdids variable\n", | 
|  | MTD_DEV_TYPE(type), num); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* allocate mtdids structure */ | 
|  | if (!(id = (struct mtdids *)malloc(sizeof(struct mtdids) + mtd_id_len))) { | 
|  | printf("out of memory\n"); | 
|  | break; | 
|  | } | 
|  | memset(id, 0, sizeof(struct mtdids) + mtd_id_len); | 
|  | id->num = num; | 
|  | id->type = type; | 
|  | id->size = size; | 
|  | id->mtd_id = (char *)(id + 1); | 
|  | strncpy(id->mtd_id, mtd_id, mtd_id_len - 1); | 
|  | id->mtd_id[mtd_id_len - 1] = '\0'; | 
|  | INIT_LIST_HEAD(&id->link); | 
|  |  | 
|  | debug("+ id %s%d\t%16lld bytes\t%s\n", | 
|  | MTD_DEV_TYPE(id->type), id->num, | 
|  | id->size, id->mtd_id); | 
|  |  | 
|  | list_add_tail(&id->link, &mtdids); | 
|  | ret = 0; | 
|  | } | 
|  | if (ret == 1) { | 
|  | /* clean mtdids list and free allocated memory */ | 
|  | list_for_each_safe(entry, n, &mtdids) { | 
|  | id_tmp = list_entry(entry, struct mtdids, link); | 
|  | list_del(entry); | 
|  | free(id_tmp); | 
|  | } | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Parse and initialize global mtdids mapping and create global | 
|  | * device/partition list. | 
|  | * | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | int mtdparts_init(void) | 
|  | { | 
|  | static int initialized = 0; | 
|  | const char *ids, *parts; | 
|  | const char *current_partition; | 
|  | int ids_changed; | 
|  | char tmp_ep[PARTITION_MAXLEN]; | 
|  | char tmp_parts[MTDPARTS_MAXLEN]; | 
|  |  | 
|  | debug("\n---mtdparts_init---\n"); | 
|  | if (!initialized) { | 
|  | INIT_LIST_HEAD(&mtdids); | 
|  | INIT_LIST_HEAD(&devices); | 
|  | memset(last_ids, 0, MTDIDS_MAXLEN); | 
|  | memset(last_parts, 0, MTDPARTS_MAXLEN); | 
|  | memset(last_partition, 0, PARTITION_MAXLEN); | 
|  | initialized = 1; | 
|  | } | 
|  |  | 
|  | /* get variables */ | 
|  | ids = getenv("mtdids"); | 
|  | /* | 
|  | * The mtdparts variable tends to be long. If we need to access it | 
|  | * before the env is relocated, then we need to use our own stack | 
|  | * buffer.  gd->env_buf will be too small. | 
|  | */ | 
|  | if (gd->flags & GD_FLG_ENV_READY) { | 
|  | parts = getenv("mtdparts"); | 
|  | } else { | 
|  | parts = tmp_parts; | 
|  | getenv_f("mtdparts", tmp_parts, MTDPARTS_MAXLEN); | 
|  | } | 
|  | current_partition = getenv("partition"); | 
|  |  | 
|  | /* save it for later parsing, cannot rely on current partition pointer | 
|  | * as 'partition' variable may be updated during init */ | 
|  | tmp_ep[0] = '\0'; | 
|  | if (current_partition) | 
|  | strncpy(tmp_ep, current_partition, PARTITION_MAXLEN); | 
|  |  | 
|  | debug("last_ids  : %s\n", last_ids); | 
|  | debug("env_ids   : %s\n", ids); | 
|  | debug("last_parts: %s\n", last_parts); | 
|  | debug("env_parts : %s\n\n", parts); | 
|  |  | 
|  | debug("last_partition : %s\n", last_partition); | 
|  | debug("env_partition  : %s\n", current_partition); | 
|  |  | 
|  | /* if mtdids varible is empty try to use defaults */ | 
|  | if (!ids) { | 
|  | if (mtdids_default) { | 
|  | debug("mtdids variable not defined, using default\n"); | 
|  | ids = mtdids_default; | 
|  | setenv("mtdids", (char *)ids); | 
|  | } else { | 
|  | printf("mtdids not defined, no default present\n"); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | if (strlen(ids) > MTDIDS_MAXLEN - 1) { | 
|  | printf("mtdids too long (> %d)\n", MTDIDS_MAXLEN); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* do no try to use defaults when mtdparts variable is not defined, | 
|  | * just check the length */ | 
|  | if (!parts) | 
|  | printf("mtdparts variable not set, see 'help mtdparts'\n"); | 
|  |  | 
|  | if (parts && (strlen(parts) > MTDPARTS_MAXLEN - 1)) { | 
|  | printf("mtdparts too long (> %d)\n", MTDPARTS_MAXLEN); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* check if we have already parsed those mtdids */ | 
|  | if ((last_ids[0] != '\0') && (strcmp(last_ids, ids) == 0)) { | 
|  | ids_changed = 0; | 
|  | } else { | 
|  | ids_changed = 1; | 
|  |  | 
|  | if (parse_mtdids(ids) != 0) { | 
|  | mtd_devices_init(); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* ok it's good, save new ids */ | 
|  | strncpy(last_ids, ids, MTDIDS_MAXLEN); | 
|  | } | 
|  |  | 
|  | /* parse partitions if either mtdparts or mtdids were updated */ | 
|  | if (parts && ((last_parts[0] == '\0') || ((strcmp(last_parts, parts) != 0)) || ids_changed)) { | 
|  | if (parse_mtdparts(parts) != 0) | 
|  | return 1; | 
|  |  | 
|  | if (list_empty(&devices)) { | 
|  | printf("mtdparts_init: no valid partitions\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* ok it's good, save new parts */ | 
|  | strncpy(last_parts, parts, MTDPARTS_MAXLEN); | 
|  |  | 
|  | /* reset first partition from first dev from the list as current */ | 
|  | current_mtd_dev = list_entry(devices.next, struct mtd_device, link); | 
|  | current_mtd_partnum = 0; | 
|  | current_save(); | 
|  |  | 
|  | debug("mtdparts_init: current_mtd_dev  = %s%d, current_mtd_partnum = %d\n", | 
|  | MTD_DEV_TYPE(current_mtd_dev->id->type), | 
|  | current_mtd_dev->id->num, current_mtd_partnum); | 
|  | } | 
|  |  | 
|  | /* mtdparts variable was reset to NULL, delete all devices/partitions */ | 
|  | if (!parts && (last_parts[0] != '\0')) | 
|  | return mtd_devices_init(); | 
|  |  | 
|  | /* do not process current partition if mtdparts variable is null */ | 
|  | if (!parts) | 
|  | return 0; | 
|  |  | 
|  | /* is current partition set in environment? if so, use it */ | 
|  | if ((tmp_ep[0] != '\0') && (strcmp(tmp_ep, last_partition) != 0)) { | 
|  | struct part_info *p; | 
|  | struct mtd_device *cdev; | 
|  | u8 pnum; | 
|  |  | 
|  | debug("--- getting current partition: %s\n", tmp_ep); | 
|  |  | 
|  | if (find_dev_and_part(tmp_ep, &cdev, &pnum, &p) == 0) { | 
|  | current_mtd_dev = cdev; | 
|  | current_mtd_partnum = pnum; | 
|  | current_save(); | 
|  | } | 
|  | } else if (getenv("partition") == NULL) { | 
|  | debug("no partition variable set, setting...\n"); | 
|  | current_save(); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Return pointer to the partition of a requested number from a requested | 
|  | * device. | 
|  | * | 
|  | * @param dev device that is to be searched for a partition | 
|  | * @param part_num requested partition number | 
|  | * @return pointer to the part_info, NULL otherwise | 
|  | */ | 
|  | static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part_num) | 
|  | { | 
|  | struct list_head *entry; | 
|  | struct part_info *part; | 
|  | int num; | 
|  |  | 
|  | if (!dev) | 
|  | return NULL; | 
|  |  | 
|  | debug("\n--- mtd_part_info: partition number %d for device %s%d (%s)\n", | 
|  | part_num, MTD_DEV_TYPE(dev->id->type), | 
|  | dev->id->num, dev->id->mtd_id); | 
|  |  | 
|  | if (part_num >= dev->num_parts) { | 
|  | printf("invalid partition number %d for device %s%d (%s)\n", | 
|  | part_num, MTD_DEV_TYPE(dev->id->type), | 
|  | dev->id->num, dev->id->mtd_id); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /* locate partition number, return it */ | 
|  | num = 0; | 
|  | list_for_each(entry, &dev->parts) { | 
|  | part = list_entry(entry, struct part_info, link); | 
|  |  | 
|  | if (part_num == num++) { | 
|  | return part; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /***************************************************/ | 
|  | /* U-boot commands				   */ | 
|  | /***************************************************/ | 
|  | /* command line only */ | 
|  | /** | 
|  | * Routine implementing u-boot chpart command. Sets new current partition based | 
|  | * on the user supplied partition id. For partition id format see find_dev_and_part(). | 
|  | * | 
|  | * @param cmdtp command internal data | 
|  | * @param flag command flag | 
|  | * @param argc number of arguments supplied to the command | 
|  | * @param argv arguments list | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) | 
|  | { | 
|  | /* command line only */ | 
|  | struct mtd_device *dev; | 
|  | struct part_info *part; | 
|  | u8 pnum; | 
|  |  | 
|  | if (mtdparts_init() !=0) | 
|  | return 1; | 
|  |  | 
|  | if (argc < 2) { | 
|  | printf("no partition id specified\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (find_dev_and_part(argv[1], &dev, &pnum, &part) != 0) | 
|  | return 1; | 
|  |  | 
|  | current_mtd_dev = dev; | 
|  | current_mtd_partnum = pnum; | 
|  | current_save(); | 
|  |  | 
|  | printf("partition changed to %s%d,%d\n", | 
|  | MTD_DEV_TYPE(dev->id->type), dev->id->num, pnum); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * Routine implementing u-boot mtdparts command. Initialize/update default global | 
|  | * partition list and process user partition request (list, add, del). | 
|  | * | 
|  | * @param cmdtp command internal data | 
|  | * @param flag command flag | 
|  | * @param argc number of arguments supplied to the command | 
|  | * @param argv arguments list | 
|  | * @return 0 on success, 1 otherwise | 
|  | */ | 
|  | static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, | 
|  | char * const argv[]) | 
|  | { | 
|  | if (argc == 2) { | 
|  | if (strcmp(argv[1], "default") == 0) { | 
|  | setenv("mtdids", (char *)mtdids_default); | 
|  | setenv("mtdparts", (char *)mtdparts_default); | 
|  | setenv("partition", NULL); | 
|  |  | 
|  | mtdparts_init(); | 
|  | return 0; | 
|  | } else if (strcmp(argv[1], "delall") == 0) { | 
|  | /* this may be the first run, initialize lists if needed */ | 
|  | mtdparts_init(); | 
|  |  | 
|  | setenv("mtdparts", NULL); | 
|  |  | 
|  | /* mtd_devices_init() calls current_save() */ | 
|  | return mtd_devices_init(); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* make sure we are in sync with env variables */ | 
|  | if (mtdparts_init() != 0) | 
|  | return 1; | 
|  |  | 
|  | if (argc == 1) { | 
|  | list_partitions(); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* mtdparts add <mtd-dev> <size>[@<offset>] <name> [ro] */ | 
|  | if (((argc == 5) || (argc == 6)) && (strncmp(argv[1], "add", 3) == 0)) { | 
|  | #define PART_ADD_DESC_MAXLEN 64 | 
|  | char tmpbuf[PART_ADD_DESC_MAXLEN]; | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | struct mtd_info *mtd; | 
|  | uint64_t next_offset; | 
|  | #endif | 
|  | u8 type, num, len; | 
|  | struct mtd_device *dev; | 
|  | struct mtd_device *dev_tmp; | 
|  | struct mtdids *id; | 
|  | struct part_info *p; | 
|  |  | 
|  | if (mtd_id_parse(argv[2], NULL, &type, &num) != 0) | 
|  | return 1; | 
|  |  | 
|  | if ((id = id_find(type, num)) == NULL) { | 
|  | printf("no such device %s defined in mtdids variable\n", argv[2]); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | len = strlen(id->mtd_id) + 1;	/* 'mtd_id:' */ | 
|  | len += strlen(argv[3]);		/* size@offset */ | 
|  | len += strlen(argv[4]) + 2;	/* '(' name ')' */ | 
|  | if (argv[5] && (strlen(argv[5]) == 2)) | 
|  | len += 2;		/* 'ro' */ | 
|  |  | 
|  | if (len >= PART_ADD_DESC_MAXLEN) { | 
|  | printf("too long partition description\n"); | 
|  | return 1; | 
|  | } | 
|  | sprintf(tmpbuf, "%s:%s(%s)%s", | 
|  | id->mtd_id, argv[3], argv[4], argv[5] ? argv[5] : ""); | 
|  | debug("add tmpbuf: %s\n", tmpbuf); | 
|  |  | 
|  | if ((device_parse(tmpbuf, NULL, &dev) != 0) || (!dev)) | 
|  | return 1; | 
|  |  | 
|  | debug("+ %s\t%d\t%s\n", MTD_DEV_TYPE(dev->id->type), | 
|  | dev->id->num, dev->id->mtd_id); | 
|  |  | 
|  | p = list_entry(dev->parts.next, struct part_info, link); | 
|  |  | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | if (get_mtd_info(dev->id->type, dev->id->num, &mtd)) | 
|  | return 1; | 
|  |  | 
|  | if (!strcmp(&argv[1][3], ".spread")) { | 
|  | spread_partition(mtd, p, &next_offset); | 
|  | debug("increased %s to %d bytes\n", p->name, p->size); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | dev_tmp = device_find(dev->id->type, dev->id->num); | 
|  | if (dev_tmp == NULL) { | 
|  | device_add(dev); | 
|  | } else if (part_add(dev_tmp, p) != 0) { | 
|  | /* merge new partition with existing ones*/ | 
|  | device_del(dev); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { | 
|  | printf("generated mtdparts too long, resetting to null\n"); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* mtdparts del part-id */ | 
|  | if ((argc == 3) && (strcmp(argv[1], "del") == 0)) { | 
|  | debug("del: part-id = %s\n", argv[2]); | 
|  |  | 
|  | return delete_partition(argv[2]); | 
|  | } | 
|  |  | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | if ((argc == 2) && (strcmp(argv[1], "spread") == 0)) | 
|  | return spread_partitions(); | 
|  | #endif /* CONFIG_CMD_MTDPARTS_SPREAD */ | 
|  |  | 
|  | return CMD_RET_USAGE; | 
|  | } | 
|  |  | 
|  | /***************************************************/ | 
|  | U_BOOT_CMD( | 
|  | chpart,	2,	0,	do_chpart, | 
|  | "change active partition", | 
|  | "part-id\n" | 
|  | "    - change active partition (e.g. part-id = nand0,1)" | 
|  | ); | 
|  |  | 
|  | #ifdef CONFIG_SYS_LONGHELP | 
|  | static char mtdparts_help_text[] = | 
|  | "\n" | 
|  | "    - list partition table\n" | 
|  | "mtdparts delall\n" | 
|  | "    - delete all partitions\n" | 
|  | "mtdparts del part-id\n" | 
|  | "    - delete partition (e.g. part-id = nand0,1)\n" | 
|  | "mtdparts add <mtd-dev> <size>[@<offset>] [<name>] [ro]\n" | 
|  | "    - add partition\n" | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | "mtdparts add.spread <mtd-dev> <size>[@<offset>] [<name>] [ro]\n" | 
|  | "    - add partition, padding size by skipping bad blocks\n" | 
|  | #endif | 
|  | "mtdparts default\n" | 
|  | "    - reset partition table to defaults\n" | 
|  | #if defined(CONFIG_CMD_MTDPARTS_SPREAD) | 
|  | "mtdparts spread\n" | 
|  | "    - adjust the sizes of the partitions so they are\n" | 
|  | "      at least as big as the mtdparts variable specifies\n" | 
|  | "      and they each start on a good block\n\n" | 
|  | #else | 
|  | "\n" | 
|  | #endif /* CONFIG_CMD_MTDPARTS_SPREAD */ | 
|  | "-----\n\n" | 
|  | "this command uses three environment variables:\n\n" | 
|  | "'partition' - keeps current partition identifier\n\n" | 
|  | "partition  := <part-id>\n" | 
|  | "<part-id>  := <dev-id>,part_num\n\n" | 
|  | "'mtdids' - linux kernel mtd device id <-> u-boot device id mapping\n\n" | 
|  | "mtdids=<idmap>[,<idmap>,...]\n\n" | 
|  | "<idmap>    := <dev-id>=<mtd-id>\n" | 
|  | "<dev-id>   := 'nand'|'nor'|'onenand'<dev-num>\n" | 
|  | "<dev-num>  := mtd device number, 0...\n" | 
|  | "<mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)\n\n" | 
|  | "'mtdparts' - partition list\n\n" | 
|  | "mtdparts=mtdparts=<mtd-def>[;<mtd-def>...]\n\n" | 
|  | "<mtd-def>  := <mtd-id>:<part-def>[,<part-def>...]\n" | 
|  | "<mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)\n" | 
|  | "<part-def> := <size>[@<offset>][<name>][<ro-flag>]\n" | 
|  | "<size>     := standard linux memsize OR '-' to denote all remaining space\n" | 
|  | "<offset>   := partition start offset within the device\n" | 
|  | "<name>     := '(' NAME ')'\n" | 
|  | "<ro-flag>  := when set to 'ro' makes partition read-only (not used, passed to kernel)"; | 
|  | #endif | 
|  |  | 
|  | U_BOOT_CMD( | 
|  | mtdparts,	6,	0,	do_mtdparts, | 
|  | "define flash/nand partitions", mtdparts_help_text | 
|  | ); | 
|  | /***************************************************/ |