blob: 4031cc6110f318143621ab205bc25299f15cb870 [file] [log] [blame]
# Copyright (c) 2010-2011 Nest, Inc.
# All rights reserved.
# This document is the property of Nest. It is considered
# confidential and proprietary information.
# This document may not be reproduced or transmitted in any form,
# in whole or in part, without the express written permission of
# Nest.
# Description:
# This file is the makefile for the Avahi ZeroConf (aka Bonjour)
# multicast DNS (mDNS) Service Discovery (SD) software.
include pre.mak
PackageName := avahi
PackageExtension := tar.gz
PackageSeparator := -
PackagePatchArgs := -p1
PackageArchive := $(PackageName).$(PackageExtension)
PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)
PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
CleanPaths += $(PackageLicenseFile)
DbusDir := sw/tps/dbus
DbusIncDir := $(call GenerateResultPaths,$(DbusDir),usr/include/dbus-1.0)
DbusArchIncDir := $(call GenerateResultPaths,$(DbusDir),usr/lib/dbus-1.0/include)
DbusLibDir := $(call GenerateResultPaths,$(DbusDir),usr/lib)
ExpatDir := sw/tps/expat
ExpatIncDir = $(call GenerateResultPaths,$(ExpatDir),usr/include)
ExpatLibDir = $(call GenerateResultPaths,$(ExpatDir),usr/lib)
LibCapDir := sw/tps/libcap
LibCapIncDir = $(call GenerateResultPaths,$(LibCapDir),usr/include)
LibCapLibDir = $(call GenerateResultPaths,$(LibCapDir),lib)
LibDaemonDir := sw/tps/libdaemon
LibDaemonIncDir = $(call GenerateResultPaths,$(LibDaemonDir),usr/include)
LibDaemonLibDir = $(call GenerateResultPaths,$(LibDaemonDir),usr/lib)
SOURCEDIRS = $(PackageSourceDir)
$(PackageSourceDir)_RULE_TARGET = $(BuildDirectory)/configure
all: $(PackageDefaultGoal)
# Generate the package license contents.
$(PackageSourceDir)/LICENSE: $(BuildDirectory)/source
$(PackageLicenseFile): $(PackageSourceDir)/LICENSE
# Extract the source from the archive and apply patches, if any.
$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
# Prepare the sources.
$(BuildDirectory)/source: | $(PackageSourceDir)
$(Verbose)touch $@
# Patch the sources, if necessary.
$(BuildDirectory)/patch: $(BuildDirectory)/source
$(Verbose)touch $@
# Generate the package build makefile.
# Configure the source for building.
# Avahi uses and, in fact, requires pkg-config to set-up LDFLAGS and
# CFLAGS for LIBDAEMON even though these are explicitly provided on
# the configure command line above as prescribed in the "how to
# configure WITHOUT pkg-config" instructions.
# Unfortunately, some site Linux systems are quite old and have a
# version of pkg-config that avahi refuses to work with.
# Consequently, we place $(HostBinDir) first in the path to ensure
# that the project-local version of pkg-config is detected and used
# rather than a host- or site-local version.
$(BuildDirectory)/configure: PATH := $(HostBinDir):$(PATH)
$(BuildDirectory)/configure: $(BuildDirectory)/source | $(PackageSourceDir) $(BuildDirectory)
$(Verbose)cd $(BuildDirectory) && \
$(CURDIR)/$(PackageSourceDir)/configure \
CPPFLAGS="-I$(ExpatIncDir) -I$(LibCapIncDir)" \
LDFLAGS="-L$(ExpatLibDir) -L$(LibCapLibDir)" \
DBUS_CFLAGS="-I$(DbusIncDir) -I$(DbusArchIncDir)" \
DBUS_LIBS="-L$(DbusLibDir) -ldbus-1" \
DBUS_VERSION=$(shell cat $(BuildRoot)/$(DbusDir)/dbus.version) \
LIBDAEMON_CFLAGS="-I$(LibDaemonIncDir)" \
LIBDAEMON_LIBS="-L$(LibDaemonLibDir) -ldaemon" \
--build=$(HostTuple) \
--host=$(TargetTuple) \
--disable-autoipd \
--disable-gdbm \
--disable-glib \
--disable-gobject \
--disable-gtk \
--disable-gtk3 \
--disable-manpages \
--disable-mono \
--disable-monodoc \
--disable-python \
--disable-qt3 \
--disable-qt4 \
--enable-dbus \
--enable-libdaemon \
--with-distro=none \
--with-xml=expat \
--prefix=/usr \
--sysconfdir=/etc \
--localstatedir=/var \
$(Verbose)touch $@
# Build the source.
# We have to unset MAKEFLAGS since they confuse the package build otherwise.
$(BuildDirectory)/build: $(BuildDirectory)/configure
$(Verbose)unset MAKEFLAGS && \
$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
$(Verbose)touch $@
# Stage the build to a temporary installation area.
# We have to unset MAKEFLAGS since they confuse the package build otherwise.
# We explictly remove '' and ''
# because some packages that depend on these libraries use libtool. If
# libtool finds a '*.la' file for a library, it uses the value of
# 'libdir=<dir>' it finds. In our case, since '--prefix=/usr' this
# value is '/usr/lib'. It then resolves '-lavahi-core' or
# '-lavahi-common' to '/usr/lib/' and
# '/usr/lib/', respectively. In a cross-compilation
# environment, this is likely to be neither the right architecture nor
# the right version to link against. In short, we lose.
# We could also handle this by removing DESTDIR and setting the prefix
# to $(ResultDirectory); however, that results in libtool hard-coding
# $(ResultDirectory) as the RPATH in the linked executables which is
# NOT what we want either. We lose again.
# By removing the '*.la' file, we win by ensuring neither a misdirected
# link nor an RPATH.
$(BuildDirectory)/stage: $(BuildDirectory)/build | $(ResultDirectory)
$(Verbose)unset MAKEFLAGS && \
$(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/ usr/lib/ usr/lib/
$(Verbose)touch $@
.PHONY: stage
stage: $(BuildDirectory)/stage
$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
include post.mak