blob: 6396ecdb198f2f12d977569e83841f204fe8de8c [file] [log] [blame]
/*
* Synopsys Designware PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Jingoo Han <jg1.han@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _PCIE_DESIGNWARE_H
#define _PCIE_DESIGNWARE_H
/* Synopsis specific PCIE configuration registers */
#define PCIE_PORT_LINK_CONTROL 0x710
#define PORT_LINK_MODE_MASK (0x3f << 16)
#define PORT_LINK_MODE_1_LANES (0x1 << 16)
#define PORT_LINK_MODE_2_LANES (0x3 << 16)
#define PORT_LINK_MODE_4_LANES (0x7 << 16)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
#define PORT_LOGIC_SPEED_CHANGE (0x1 << 17)
#define PORT_LOGIC_LINK_WIDTH_MASK (0x1ff << 8)
#define PORT_LOGIC_LINK_WIDTH_1_LANES (0x1 << 8)
#define PORT_LOGIC_LINK_WIDTH_2_LANES (0x2 << 8)
#define PORT_LOGIC_LINK_WIDTH_4_LANES (0x4 << 8)
#define PCIE_MSI_ADDR_LO 0x820
#define PCIE_MSI_ADDR_HI 0x824
#define PCIE_MSI_INTR0_ENABLE 0x828
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND (0x1 << 31)
#define PCIE_ATU_REGION_OUTBOUND (0x0 << 31)
#define PCIE_ATU_REGION_INDEX1 (0x1 << 0)
#define PCIE_ATU_REGION_INDEX0 (0x0 << 0)
#define PCIE_ATU_CR1 0x904
#define PCIE_ATU_TYPE_MEM (0x0 << 0)
#define PCIE_ATU_TYPE_IO (0x2 << 0)
#define PCIE_ATU_TYPE_CFG0 (0x4 << 0)
#define PCIE_ATU_TYPE_CFG1 (0x5 << 0)
#define PCIE_ATU_CR2 0x908
#define PCIE_ATU_ENABLE (0x1 << 31)
#define PCIE_ATU_BAR_MODE_ENABLE (0x1 << 30)
#define PCIE_ATU_LOWER_BASE 0x90C
#define PCIE_ATU_UPPER_BASE 0x910
#define PCIE_ATU_LIMIT 0x914
#define PCIE_ATU_LOWER_TARGET 0x918
#define PCIE_ATU_BUS(x) (((x) & 0xff) << 24)
#define PCIE_ATU_DEV(x) (((x) & 0x1f) << 19)
#define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
#define PCIE_ATU_UPPER_TARGET 0x91C
struct pcie_port_info {
u32 cfg0_size;
u32 cfg1_size;
u32 io_size;
u32 mem_size;
phys_addr_t io_bus_addr;
phys_addr_t mem_bus_addr;
};
/*
* Maximum number of MSI IRQs can be 256 per controller. But keep
* it 32 as of now. Probably we will never need more than 32. If needed,
* then increment it in multiple of 32.
*/
#define MAX_MSI_IRQS 32
#define MAX_MSI_CTRLS (MAX_MSI_IRQS / 32)
struct pcie_port {
struct device *dev;
u8 root_bus_nr;
void __iomem *dbi_base;
u64 cfg0_base;
void __iomem *va_cfg0_base;
u64 cfg1_base;
void __iomem *va_cfg1_base;
u64 io_base;
u64 mem_base;
spinlock_t conf_lock;
struct resource cfg;
struct resource io;
struct resource mem;
struct pcie_port_info config;
int irq;
u32 lanes;
struct pcie_host_ops *ops;
u32 quirks; /* Deviations from spec. */
int msi_irq;
struct irq_domain *irq_domain;
unsigned long msi_data;
DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
u32 msi_inten_save[MAX_MSI_CTRLS];
};
struct pcie_host_ops {
void (*readl_rc)(struct pcie_port *pp,
void __iomem *dbi_base, u32 *val);
void (*writel_rc)(struct pcie_port *pp,
u32 val, void __iomem *dbi_base);
int (*rd_own_conf)(struct pcie_port *pp, int where, int size, u32 *val);
int (*wr_own_conf)(struct pcie_port *pp, int where, int size, u32 val);
int (*link_up)(struct pcie_port *pp);
int (*host_init)(struct pcie_port *pp);
void (*msi_set_irq)(struct pcie_port *pp, int irq);
void (*msi_clear_irq)(struct pcie_port *pp, int irq);
u32 (*get_msi_data)(struct pcie_port *pp);
u32 (*get_msi_addr)(struct pcie_port *pp);
};
int cfg_read(void __iomem *addr, int where, int size, u32 *val);
int cfg_write(void __iomem *addr, int where, int size, u32 val);
irqreturn_t dw_handle_msi_irq(struct pcie_port *pp);
void dw_pcie_msi_init(struct pcie_port *pp);
void dw_pcie_msi_cfg_save(struct pcie_port *pp);
void dw_pcie_msi_cfg_restore(struct pcie_port *pp);
int dw_pcie_link_up(struct pcie_port *pp);
void dw_pcie_setup_rc(struct pcie_port *pp);
int dw_pcie_host_init(struct pcie_port *pp);
#endif /* _PCIE_DESIGNWARE_H */