| /* |
| * Intel SMP support routines. |
| * |
| * (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk> |
| * (c) 1998-99, 2000, 2009 Ingo Molnar <mingo@redhat.com> |
| * (c) 2002,2003 Andi Kleen, SuSE Labs. |
| * |
| * i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com> |
| * |
| * This code is released under the GNU General Public License version 2 or |
| * later. |
| */ |
| |
| #include <linux/init.h> |
| |
| #include <linux/mm.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/cache.h> |
| #include <linux/interrupt.h> |
| #include <linux/cpu.h> |
| #include <linux/gfp.h> |
| |
| #include <asm/mtrr.h> |
| #include <asm/tlbflush.h> |
| #include <asm/mmu_context.h> |
| #include <asm/proto.h> |
| #include <asm/apic.h> |
| /* |
| * Some notes on x86 processor bugs affecting SMP operation: |
| * |
| * Pentium, Pentium Pro, II, III (and all CPUs) have bugs. |
| * The Linux implications for SMP are handled as follows: |
| * |
| * Pentium III / [Xeon] |
| * None of the E1AP-E3AP errata are visible to the user. |
| * |
| * E1AP. see PII A1AP |
| * E2AP. see PII A2AP |
| * E3AP. see PII A3AP |
| * |
| * Pentium II / [Xeon] |
| * None of the A1AP-A3AP errata are visible to the user. |
| * |
| * A1AP. see PPro 1AP |
| * A2AP. see PPro 2AP |
| * A3AP. see PPro 7AP |
| * |
| * Pentium Pro |
| * None of 1AP-9AP errata are visible to the normal user, |
| * except occasional delivery of 'spurious interrupt' as trap #15. |
| * This is very rare and a non-problem. |
| * |
| * 1AP. Linux maps APIC as non-cacheable |
| * 2AP. worked around in hardware |
| * 3AP. fixed in C0 and above steppings microcode update. |
| * Linux does not use excessive STARTUP_IPIs. |
| * 4AP. worked around in hardware |
| * 5AP. symmetric IO mode (normal Linux operation) not affected. |
| * 'noapic' mode has vector 0xf filled out properly. |
| * 6AP. 'noapic' mode might be affected - fixed in later steppings |
| * 7AP. We do not assume writes to the LVT deassering IRQs |
| * 8AP. We do not enable low power mode (deep sleep) during MP bootup |
| * 9AP. We do not use mixed mode |
| * |
| * Pentium |
| * There is a marginal case where REP MOVS on 100MHz SMP |
| * machines with B stepping processors can fail. XXX should provide |
| * an L1cache=Writethrough or L1cache=off option. |
| * |
| * B stepping CPUs may hang. There are hardware work arounds |
| * for this. We warn about it in case your board doesn't have the work |
| * arounds. Basically that's so I can tell anyone with a B stepping |
| * CPU and SMP problems "tough". |
| * |
| * Specific items [From Pentium Processor Specification Update] |
| * |
| * 1AP. Linux doesn't use remote read |
| * 2AP. Linux doesn't trust APIC errors |
| * 3AP. We work around this |
| * 4AP. Linux never generated 3 interrupts of the same priority |
| * to cause a lost local interrupt. |
| * 5AP. Remote read is never used |
| * 6AP. not affected - worked around in hardware |
| * 7AP. not affected - worked around in hardware |
| * 8AP. worked around in hardware - we get explicit CS errors if not |
| * 9AP. only 'noapic' mode affected. Might generate spurious |
| * interrupts, we log only the first one and count the |
| * rest silently. |
| * 10AP. not affected - worked around in hardware |
| * 11AP. Linux reads the APIC between writes to avoid this, as per |
| * the documentation. Make sure you preserve this as it affects |
| * the C stepping chips too. |
| * 12AP. not affected - worked around in hardware |
| * 13AP. not affected - worked around in hardware |
| * 14AP. we always deassert INIT during bootup |
| * 15AP. not affected - worked around in hardware |
| * 16AP. not affected - worked around in hardware |
| * 17AP. not affected - worked around in hardware |
| * 18AP. not affected - worked around in hardware |
| * 19AP. not affected - worked around in BIOS |
| * |
| * If this sounds worrying believe me these bugs are either ___RARE___, |
| * or are signal timing bugs worked around in hardware and there's |
| * about nothing of note with C stepping upwards. |
| */ |
| |
| /* |
| * this function sends a 'reschedule' IPI to another CPU. |
| * it goes straight through and wastes no time serializing |
| * anything. Worst case is that we lose a reschedule ... |
| */ |
| static void native_smp_send_reschedule(int cpu) |
| { |
| if (unlikely(cpu_is_offline(cpu))) { |
| WARN_ON(1); |
| return; |
| } |
| apic->send_IPI_mask(cpumask_of(cpu), RESCHEDULE_VECTOR); |
| } |
| |
| void native_send_call_func_single_ipi(int cpu) |
| { |
| apic->send_IPI_mask(cpumask_of(cpu), CALL_FUNCTION_SINGLE_VECTOR); |
| } |
| |
| void native_send_call_func_ipi(const struct cpumask *mask) |
| { |
| cpumask_var_t allbutself; |
| |
| if (!alloc_cpumask_var(&allbutself, GFP_ATOMIC)) { |
| apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR); |
| return; |
| } |
| |
| cpumask_copy(allbutself, cpu_online_mask); |
| cpumask_clear_cpu(smp_processor_id(), allbutself); |
| |
| if (cpumask_equal(mask, allbutself) && |
| cpumask_equal(cpu_online_mask, cpu_callout_mask)) |
| apic->send_IPI_allbutself(CALL_FUNCTION_VECTOR); |
| else |
| apic->send_IPI_mask(mask, CALL_FUNCTION_VECTOR); |
| |
| free_cpumask_var(allbutself); |
| } |
| |
| /* |
| * this function calls the 'stop' function on all other CPUs in the system. |
| */ |
| |
| asmlinkage void smp_reboot_interrupt(void) |
| { |
| ack_APIC_irq(); |
| irq_enter(); |
| stop_this_cpu(NULL); |
| irq_exit(); |
| } |
| |
| static void native_stop_other_cpus(int wait) |
| { |
| unsigned long flags; |
| unsigned long timeout; |
| |
| if (reboot_force) |
| return; |
| |
| /* |
| * Use an own vector here because smp_call_function |
| * does lots of things not suitable in a panic situation. |
| * On most systems we could also use an NMI here, |
| * but there are a few systems around where NMI |
| * is problematic so stay with an non NMI for now |
| * (this implies we cannot stop CPUs spinning with irq off |
| * currently) |
| */ |
| if (num_online_cpus() > 1) { |
| apic->send_IPI_allbutself(REBOOT_VECTOR); |
| |
| /* |
| * Don't wait longer than a second if the caller |
| * didn't ask us to wait. |
| */ |
| timeout = USEC_PER_SEC; |
| while (num_online_cpus() > 1 && (wait || timeout--)) |
| udelay(1); |
| } |
| |
| local_irq_save(flags); |
| disable_local_APIC(); |
| local_irq_restore(flags); |
| } |
| |
| /* |
| * Reschedule call back. Nothing to do, |
| * all the work is done automatically when |
| * we return from the interrupt. |
| */ |
| void smp_reschedule_interrupt(struct pt_regs *regs) |
| { |
| ack_APIC_irq(); |
| inc_irq_stat(irq_resched_count); |
| /* |
| * KVM uses this interrupt to force a cpu out of guest mode |
| */ |
| } |
| |
| void smp_call_function_interrupt(struct pt_regs *regs) |
| { |
| ack_APIC_irq(); |
| irq_enter(); |
| generic_smp_call_function_interrupt(); |
| inc_irq_stat(irq_call_count); |
| irq_exit(); |
| } |
| |
| void smp_call_function_single_interrupt(struct pt_regs *regs) |
| { |
| ack_APIC_irq(); |
| irq_enter(); |
| generic_smp_call_function_single_interrupt(); |
| inc_irq_stat(irq_call_count); |
| irq_exit(); |
| } |
| |
| struct smp_ops smp_ops = { |
| .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu, |
| .smp_prepare_cpus = native_smp_prepare_cpus, |
| .smp_cpus_done = native_smp_cpus_done, |
| |
| .stop_other_cpus = native_stop_other_cpus, |
| .smp_send_reschedule = native_smp_send_reschedule, |
| |
| .cpu_up = native_cpu_up, |
| .cpu_die = native_cpu_die, |
| .cpu_disable = native_cpu_disable, |
| .play_dead = native_play_dead, |
| |
| .send_call_func_ipi = native_send_call_func_ipi, |
| .send_call_func_single_ipi = native_send_call_func_single_ipi, |
| }; |
| EXPORT_SYMBOL_GPL(smp_ops); |