| /* |
| * Linux driver for HYSDN cards |
| * common definitions for both sides of the bus: |
| * - conventions both spoolers must know |
| * - channel numbers agreed upon |
| * |
| * Author M. Steinkopf |
| * Copyright 1999 by M. Steinkopf |
| * |
| * This software may be used and distributed according to the terms |
| * of the GNU General Public License, incorporated herein by reference. |
| * |
| */ |
| |
| #ifndef __INCE1PC_H__ |
| #define __INCE1PC_H__ |
| |
| /* basic scalar definitions have same meanning, |
| * but their declaration location depends on environment |
| */ |
| |
| /*--------------------------------------channel numbers---------------------*/ |
| #define CHAN_SYSTEM 0x0001 /* system channel (spooler to spooler) */ |
| #define CHAN_ERRLOG 0x0005 /* error logger */ |
| #define CHAN_CAPI 0x0064 /* CAPI interface */ |
| #define CHAN_NDIS_DATA 0x1001 /* NDIS data transfer */ |
| |
| /*--------------------------------------POF ready msg-----------------------*/ |
| /* NOTE: after booting POF sends system ready message to PC: */ |
| #define RDY_MAGIC 0x52535953UL /* 'SYSR' reversed */ |
| #define RDY_MAGIC_SIZE 4 /* size in bytes */ |
| |
| #define MAX_N_TOK_BYTES 255 |
| |
| #define MIN_RDY_MSG_SIZE RDY_MAGIC_SIZE |
| #define MAX_RDY_MSG_SIZE (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES) |
| |
| #define SYSR_TOK_END 0 |
| #define SYSR_TOK_B_CHAN 1 /* nr. of B-Channels; DataLen=1; def: 2 */ |
| #define SYSR_TOK_FAX_CHAN 2 /* nr. of FAX Channels; DataLen=1; def: 0 */ |
| #define SYSR_TOK_MAC_ADDR 3 /* MAC-Address; DataLen=6; def: auto */ |
| #define SYSR_TOK_ESC 255 /* undefined data size yet */ |
| /* default values, if not corrected by token: */ |
| #define SYSR_TOK_B_CHAN_DEF 2 /* assume 2 B-Channels */ |
| #define SYSR_TOK_FAX_CHAN_DEF 1 /* assume 1 FAX Channel */ |
| |
| /* syntax of new SYSR token stream: |
| * channel: CHAN_SYSTEM |
| * msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE |
| * RDY_MAGIC_SIZE <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES) |
| * msg : 0 1 2 3 {4 5 6 ..} |
| * S Y S R MAX_N_TOK_BYTES bytes of TokenStream |
| * |
| * TokenStream := empty |
| * | {NonEndTokenChunk} EndToken RotlCRC |
| * NonEndTokenChunk:= NonEndTokenId DataLen [Data] |
| * NonEndTokenId := 0x01 .. 0xFE 1 BYTE |
| * DataLen := 0x00 .. 0xFF 1 BYTE |
| * Data := DataLen bytes |
| * EndToken := 0x00 |
| * RotlCRC := special 1 byte CRC over all NonEndTokenChunk bytes |
| * s. RotlCRC algorithm |
| * |
| * RotlCRC algorithm: |
| * ucSum= 0 1 unsigned char |
| * for all NonEndTokenChunk bytes: |
| * ROTL(ucSum,1) rotate left by 1 |
| * ucSum += Char; add current byte with swap around |
| * RotlCRC= ~ucSum; invert all bits for result |
| * |
| * note: |
| * - for 16-bit FIFO add padding 0 byte to achieve even token data bytes! |
| */ |
| |
| /*--------------------------------------error logger------------------------*/ |
| /* note: pof needs final 0 ! */ |
| #define ERRLOG_CMD_REQ "ERRLOG ON" |
| #define ERRLOG_CMD_REQ_SIZE 10 /* with final 0 byte ! */ |
| #define ERRLOG_CMD_STOP "ERRLOG OFF" |
| #define ERRLOG_CMD_STOP_SIZE 11 /* with final 0 byte ! */ |
| |
| #define ERRLOG_ENTRY_SIZE 64 /* sizeof(tErrLogEntry) */ |
| /* remaining text size = 55 */ |
| #define ERRLOG_TEXT_SIZE (ERRLOG_ENTRY_SIZE-2*4-1) |
| |
| typedef struct ErrLogEntry_tag { |
| |
| /*00 */ unsigned long ulErrType; |
| |
| /*04 */ unsigned long ulErrSubtype; |
| |
| /*08 */ unsigned char ucTextSize; |
| |
| /*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE]; |
| /* ASCIIZ of len ucTextSize-1 */ |
| |
| /*40 */ |
| } tErrLogEntry; |
| |
| |
| #if defined(__TURBOC__) |
| #if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE |
| #error size of tErrLogEntry != ERRLOG_ENTRY_SIZE |
| #endif /* */ |
| #endif /* */ |
| |
| /*--------------------------------------DPRAM boot spooler------------------*/ |
| /* this is the struture used between pc and |
| * hyperstone to exchange boot data |
| */ |
| #define DPRAM_SPOOLER_DATA_SIZE 0x20 |
| typedef struct DpramBootSpooler_tag { |
| |
| /*00 */ unsigned char Len; |
| |
| /*01 */ volatile unsigned char RdPtr; |
| |
| /*02 */ unsigned char WrPtr; |
| |
| /*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE]; |
| |
| /*23 */ |
| } tDpramBootSpooler; |
| |
| |
| #define DPRAM_SPOOLER_MIN_SIZE 5 /* Len+RdPtr+Wrptr+2*data */ |
| #define DPRAM_SPOOLER_DEF_SIZE 0x23 /* current default size */ |
| |
| /*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/ |
| /* at DPRAM offset 0x1C00: */ |
| #define SIZE_RSV_SOFT_UART 0x1B0 /* 432 bytes reserved for SoftUart */ |
| |
| |
| #endif /* __INCE1PC_H__ */ |
