| Device-Tree bindings for tilcdc DRM TFP410 output driver |
| |
| Required properties: |
| - compatible: value should be "ti,tilcdc,tfp410". |
| - i2c: the phandle for the i2c device to use for DDC |
| |
| Recommended properties: |
| - pinctrl-names, pinctrl-0: the pincontrol settings to configure |
| muxing properly for pins that connect to TFP410 device |
| - powerdn-gpio: the powerdown GPIO, pulled low to power down the |
| TFP410 device (for DPMS_OFF) |
| |
| Example: |
| |
| dvicape { |
| compatible = "ti,tilcdc,tfp410"; |
| i2c = <&i2c2>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&bone_dvi_cape_dvi_00A1_pins>; |
| powerdn-gpio = <&gpio2 31 0>; |
| }; |
