| * Freescale MXS Inter IC (I2C) Controller |
| |
| Required properties: |
| - compatible: Should be "fsl,<chip>-i2c" |
| - reg: Should contain registers location and length |
| - interrupts: Should contain ERROR interrupt number |
| - clock-frequency: Desired I2C bus clock frequency in Hz. |
| Only 100000Hz and 400000Hz modes are supported. |
| - dmas: DMA specifier, consisting of a phandle to DMA controller node |
| and I2C DMA channel ID. |
| Refer to dma.txt and fsl-mxs-dma.txt for details. |
| - dma-names: Must be "rx-tx". |
| |
| Examples: |
| |
| i2c0: i2c@80058000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx28-i2c"; |
| reg = <0x80058000 2000>; |
| interrupts = <111>; |
| clock-frequency = <100000>; |
| dmas = <&dma_apbx 6>; |
| dma-names = "rx-tx"; |
| }; |
