| /* | 
 |  * Copyright (C) 2010 DENX Software Engineering | 
 |  * | 
 |  * Anatolij Gustschin, <agust@denx.de> | 
 |  * | 
 |  * PDM360NG board setup | 
 |  * | 
 |  * This is free software; you can redistribute it and/or modify it | 
 |  * under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/io.h> | 
 | #include <linux/of_platform.h> | 
 |  | 
 | #include <asm/machdep.h> | 
 | #include <asm/ipic.h> | 
 |  | 
 | #include "mpc512x.h" | 
 |  | 
 | #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ | 
 |     defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) | 
 | #include <linux/interrupt.h> | 
 | #include <linux/spi/ads7846.h> | 
 | #include <linux/spi/spi.h> | 
 | #include <linux/notifier.h> | 
 |  | 
 | static void *pdm360ng_gpio_base; | 
 |  | 
 | static int pdm360ng_get_pendown_state(void) | 
 | { | 
 | 	u32 reg; | 
 |  | 
 | 	reg = in_be32(pdm360ng_gpio_base + 0xc); | 
 | 	if (reg & 0x40) | 
 | 		setbits32(pdm360ng_gpio_base + 0xc, 0x40); | 
 |  | 
 | 	reg = in_be32(pdm360ng_gpio_base + 0x8); | 
 |  | 
 | 	/* return 1 if pen is down */ | 
 | 	return (reg & 0x40) == 0; | 
 | } | 
 |  | 
 | static struct ads7846_platform_data pdm360ng_ads7846_pdata = { | 
 | 	.model			= 7845, | 
 | 	.get_pendown_state	= pdm360ng_get_pendown_state, | 
 | 	.irq_flags		= IRQF_TRIGGER_LOW, | 
 | }; | 
 |  | 
 | static int __init pdm360ng_penirq_init(void) | 
 | { | 
 | 	struct device_node *np; | 
 |  | 
 | 	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); | 
 | 	if (!np) { | 
 | 		pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	pdm360ng_gpio_base = of_iomap(np, 0); | 
 | 	of_node_put(np); | 
 | 	if (!pdm360ng_gpio_base) { | 
 | 		pr_err("%s: Can't map gpio regs.\n", __func__); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); | 
 | 	setbits32(pdm360ng_gpio_base + 0x18, 0x2000); | 
 | 	setbits32(pdm360ng_gpio_base + 0x10, 0x40); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, | 
 | 					unsigned long event, void *__dev) | 
 | { | 
 | 	struct device *dev = __dev; | 
 |  | 
 | 	if ((event == BUS_NOTIFY_ADD_DEVICE) && | 
 | 	    of_device_is_compatible(dev->of_node, "ti,ads7846")) { | 
 | 		dev->platform_data = &pdm360ng_ads7846_pdata; | 
 | 		return NOTIFY_OK; | 
 | 	} | 
 | 	return NOTIFY_DONE; | 
 | } | 
 |  | 
 | static struct notifier_block pdm360ng_touchscreen_nb = { | 
 | 	.notifier_call = pdm360ng_touchscreen_notifier_call, | 
 | }; | 
 |  | 
 | static void __init pdm360ng_touchscreen_init(void) | 
 | { | 
 | 	if (pdm360ng_penirq_init()) | 
 | 		return; | 
 |  | 
 | 	bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); | 
 | } | 
 | #else | 
 | static inline void __init pdm360ng_touchscreen_init(void) | 
 | { | 
 | } | 
 | #endif /* CONFIG_TOUCHSCREEN_ADS7846 */ | 
 |  | 
 | void __init pdm360ng_init(void) | 
 | { | 
 | 	mpc512x_init(); | 
 | 	pdm360ng_touchscreen_init(); | 
 | } | 
 |  | 
 | static int __init pdm360ng_probe(void) | 
 | { | 
 | 	unsigned long root = of_get_flat_dt_root(); | 
 |  | 
 | 	return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); | 
 | } | 
 |  | 
 | define_machine(pdm360ng) { | 
 | 	.name			= "PDM360NG", | 
 | 	.probe			= pdm360ng_probe, | 
 | 	.setup_arch		= mpc512x_setup_diu, | 
 | 	.init			= pdm360ng_init, | 
 | 	.init_early		= mpc512x_init_diu, | 
 | 	.init_IRQ		= mpc512x_init_IRQ, | 
 | 	.get_irq		= ipic_get_irq, | 
 | 	.calibrate_decr		= generic_calibrate_decr, | 
 | 	.restart		= mpc512x_restart, | 
 | }; |