drivers/net/wireless/Kconfig - nest-learning-thermostat/5.6.2/linux-imx - Git at Google


            
            #

            
            # Wireless LAN device configuration

            
            #


            menuconfig WLAN

            
            	bool "Wireless LAN"

            
            	depends on !S390

            
            	depends on NET

            
            	select WIRELESS

            
            	default y

            
            	---help---

            
            	  This section contains all the pre 802.11 and 802.11 wireless

            
            	  device drivers. For a complete list of drivers and documentation

            
            	  on them refer to the wireless wiki:


            	  http://wireless.kernel.org/en/users/Drivers


            if WLAN


            config PCMCIA_RAYCS

            
            	tristate "Aviator/Raytheon 2.4GHz wireless support"

            
            	depends on PCMCIA

            
            	select WIRELESS_EXT

            
            	select WEXT_SPY

            
            	select WEXT_PRIV

            
            	---help---

            
            	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA

            
            	  (PC-card) wireless Ethernet networking card to your computer.

            
            	  Please read the file <file:Documentation/networking/ray_cs.txt> for

            
            	  details.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called ray_cs.  If unsure, say N.


            config LIBERTAS_THINFIRM

            
            	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"

            
            	depends on MAC80211

            
            	select FW_LOADER

            
            	---help---

            
            	  A library for Marvell Libertas 8xxx devices using thinfirm.


            config LIBERTAS_THINFIRM_DEBUG

            
            	bool "Enable full debugging output in the Libertas thin firmware module."

            
            	depends on LIBERTAS_THINFIRM

            
            	---help---

            
            	  Debugging support.


            config LIBERTAS_THINFIRM_USB

            
            	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"

            
            	depends on LIBERTAS_THINFIRM && USB

            
            	---help---

            
            	  A driver for Marvell Libertas 8388 USB devices using thinfirm.


            config AIRO

            
            	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"

            
            	depends on ISA_DMA_API && (PCI || BROKEN)

            
            	select WIRELESS_EXT

            
            	select CRYPTO

            
            	select WEXT_SPY

            
            	select WEXT_PRIV

            
            	---help---

            
            	  This is the standard Linux driver to support Cisco/Aironet ISA and

            
            	  PCI 802.11 wireless cards.

            
            	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X

            
            	  - with or without encryption) as well as card before the Cisco

            
            	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).


            	  This driver support both the standard Linux Wireless Extensions

            
            	  and Cisco proprietary API, so both the Linux Wireless Tools and the

            
            	  Cisco Linux utilities can be used to configure the card.


            	  The driver can be compiled as a module and will be named "airo".


            config ATMEL

            
                  tristate "Atmel at76c50x chipset  802.11b support"

            
                  depends on (PCI || PCMCIA)

            
                  select WIRELESS_EXT

            
                  select WEXT_PRIV

            
                  select FW_LOADER

            
                  select CRC32

            
                   ---help---

            
                    A driver 802.11b wireless cards based on the Atmel fast-vnet

            
                    chips. This driver supports standard Linux wireless extensions.


                    Many  cards based on this chipset do not have flash memory

            
                    and need their firmware loaded at start-up. If yours is

            
                    one of these, you will need to provide a firmware image

            
                    to be loaded into the card by the driver. The Atmel

            
                    firmware package can be downloaded from

            
                    <http://www.thekelleys.org.uk/atmel>


            config PCI_ATMEL

            
                  tristate "Atmel at76c506 PCI cards"

            
                  depends on ATMEL && PCI

            
                   ---help---

            
                    Enable support for PCI and mini-PCI cards containing the

            
                    Atmel at76c506 chip.


            config PCMCIA_ATMEL

            
            	tristate "Atmel at76c502/at76c504 PCMCIA cards"

            
            	depends on ATMEL && PCMCIA

            
            	select WIRELESS_EXT

            
            	select FW_LOADER

            
            	select CRC32

            
            	---help---

            
            	  Enable support for PCMCIA cards containing the

            
            	  Atmel at76c502 and at76c504 chips.


            config AT76C50X_USB

            
                    tristate "Atmel at76c503/at76c505/at76c505a USB cards"

            
                    depends on MAC80211 && USB

            
                    select FW_LOADER

            
                    ---help---

            
                      Enable support for USB Wireless devices using Atmel at76c503,

            
                      at76c505 or at76c505a chips.


            config AIRO_CS

            
            	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"

            
            	depends on PCMCIA && (BROKEN || !M32R)

            
            	select WIRELESS_EXT

            
            	select WEXT_SPY

            
            	select WEXT_PRIV

            
            	select CRYPTO

            
            	select CRYPTO_AES

            
            	---help---

            
            	  This is the standard Linux driver to support Cisco/Aironet PCMCIA

            
            	  802.11 wireless cards.  This driver is the same as the Aironet

            
            	  driver part of the Linux Pcmcia package.

            
            	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X

            
            	  - with or without encryption) as well as card before the Cisco

            
            	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also

            
            	  supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom

            
            	  802.11b cards.


            	  This driver support both the standard Linux Wireless Extensions

            
            	  and Cisco proprietary API, so both the Linux Wireless Tools and the

            
            	  Cisco Linux utilities can be used to configure the card.


            config PCMCIA_WL3501

            
            	tristate "Planet WL3501 PCMCIA cards"

            
            	depends on PCMCIA

            
            	select WIRELESS_EXT

            
            	select WEXT_SPY

            
            	help

            
            	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.

            
            	  It has basic support for Linux wireless extensions and initial

            
            	  micro support for ethtool.


            config PRISM54

            
            	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'

            
            	depends on PCI

            
            	select WIRELESS_EXT

            
            	select WEXT_SPY

            
            	select WEXT_PRIV

            
            	select FW_LOADER

            
            	---help---

            
            	  This enables support for FullMAC PCI/Cardbus prism54 devices. This

            
            	  driver is now deprecated in favor for the SoftMAC driver, p54pci.

            
            	  p54pci supports FullMAC PCI/Cardbus devices as well.


            	  For more information refer to the p54 wiki:


            	  http://wireless.kernel.org/en/users/Drivers/p54


            	  Note: You need a motherboard with DMA support to use any of these cards


            	  When built as module you get the module prism54


            config USB_ZD1201

            
            	tristate "USB ZD1201 based Wireless device support"

            
            	depends on USB

            
            	select WIRELESS_EXT

            
            	select WEXT_PRIV

            
            	select FW_LOADER

            
            	---help---

            
            	  Say Y if you want to use wireless LAN adapters based on the ZyDAS

            
            	  ZD1201 chip.


            	  This driver makes the adapter appear as a normal Ethernet interface,

            
            	  typically on wlan0.


            	  The zd1201 device requires external firmware to be loaded.

            
            	  This can be found at http://linux-lc100020.sourceforge.net/


            	  To compile this driver as a module, choose M here: the

            
            	  module will be called zd1201.


            config USB_NET_RNDIS_WLAN

            
            	tristate "Wireless RNDIS USB support"

            
            	depends on USB

            
            	depends on CFG80211

            
            	select USB_USBNET

            
            	select USB_NET_CDCETHER

            
            	select USB_NET_RNDIS_HOST

            
            	---help---

            
            	  This is a driver for wireless RNDIS devices.

            
            	  These are USB based adapters found in devices such as:


            	  Buffalo WLI-U2-KG125S

            
            	  U.S. Robotics USR5421

            
            	  Belkin F5D7051

            
            	  Linksys WUSB54GSv2

            
            	  Linksys WUSB54GSC

            
            	  Asus WL169gE

            
            	  Eminent EM4045

            
            	  BT Voyager 1055

            
            	  Linksys WUSB54GSv1

            
            	  U.S. Robotics USR5420

            
            	  BUFFALO WLI-USB-G54


            	  All of these devices are based on Broadcom 4320 chip which is the

            
            	  only wireless RNDIS chip known to date.


            	  If you choose to build a module, it'll be called rndis_wlan.


            source "drivers/net/wireless/rtl818x/Kconfig"


            config ADM8211

            
            	tristate "ADMtek ADM8211 support"

            
            	depends on MAC80211 && PCI

            
            	select CRC32

            
            	select EEPROM_93CX6

            
            	---help---

            
            	  This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.

            
            	  These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:


            	  Xterasys Cardbus XN-2411b

            
            	  Blitz NetWave Point PC

            
            	  TrendNet 221pc

            
            	  Belkin F5D6001

            
            	  SMC 2635W

            
            	  Linksys WPC11 v1

            
            	  Fiberline FL-WL-200X

            
            	  3com Office Connect (3CRSHPW796)

            
            	  Corega WLPCIB-11

            
            	  SMC 2602W V2 EU

            
            	  D-Link DWL-520 Revision C


            	  However, some of these cards have been replaced with other chips

            
            	  like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or

            
            	  the Ralink RT2400 (SMC2635W) without a model number change.


            	  Thanks to Infineon-ADMtek for their support of this driver.


            config MAC80211_HWSIM

            
            	tristate "Simulated radio testing tool for mac80211"

            
            	depends on MAC80211

            
            	---help---

            
            	  This driver is a developer testing tool that can be used to test

            
            	  IEEE 802.11 networking stack (mac80211) functionality. This is not

            
            	  needed for normal wireless LAN usage and is only for testing. See

            
            	  Documentation/networking/mac80211_hwsim for more information on how

            
            	  to use this tool.


            	  To compile this driver as a module, choose M here: the module will be

            
            	  called mac80211_hwsim.  If unsure, say N.


            config MWL8K

            
            	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"

            
            	depends on MAC80211 && PCI

            
            	---help---

            
            	  This driver supports Marvell TOPDOG 802.11 wireless cards.


            	  To compile this driver as a module, choose M here: the module

            
            	  will be called mwl8k.  If unsure, say N.


            source "drivers/net/wireless/ath/Kconfig"

            
            source "drivers/net/wireless/b43/Kconfig"

            
            source "drivers/net/wireless/b43legacy/Kconfig"

            
            source "drivers/net/wireless/brcm80211/Kconfig"

            
            source "drivers/net/wireless/hostap/Kconfig"

            
            source "drivers/net/wireless/ipw2x00/Kconfig"

            
            source "drivers/net/wireless/iwlwifi/Kconfig"

            
            source "drivers/net/wireless/iwlegacy/Kconfig"

            
            source "drivers/net/wireless/libertas/Kconfig"

            
            source "drivers/net/wireless/orinoco/Kconfig"

            
            source "drivers/net/wireless/p54/Kconfig"

            
            source "drivers/net/wireless/rt2x00/Kconfig"

            
            source "drivers/net/wireless/rtlwifi/Kconfig"

            
            source "drivers/net/wireless/ti/Kconfig"

            
            source "drivers/net/wireless/zd1211rw/Kconfig"

            
            source "drivers/net/wireless/mwifiex/Kconfig"


            endif # WLAN
	#
	# Wireless LAN device configuration
	#

	menuconfig WLAN
	bool "Wireless LAN"
	depends on !S390
	depends on NET
	select WIRELESS
	default y
	---help---
	This section contains all the pre 802.11 and 802.11 wireless
	device drivers. For a complete list of drivers and documentation
	on them refer to the wireless wiki:

	http://wireless.kernel.org/en/users/Drivers

	if WLAN

	config PCMCIA_RAYCS
	tristate "Aviator/Raytheon 2.4GHz wireless support"
	depends on PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	---help---
	Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
	(PC-card) wireless Ethernet networking card to your computer.
	Please read the file <file:Documentation/networking/ray_cs.txt> for
	details.

	To compile this driver as a module, choose M here: the module will be
	called ray_cs. If unsure, say N.

	config LIBERTAS_THINFIRM
	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
	depends on MAC80211
	select FW_LOADER
	---help---
	A library for Marvell Libertas 8xxx devices using thinfirm.

	config LIBERTAS_THINFIRM_DEBUG
	bool "Enable full debugging output in the Libertas thin firmware module."
	depends on LIBERTAS_THINFIRM
	---help---
	Debugging support.

	config LIBERTAS_THINFIRM_USB
	tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
	depends on LIBERTAS_THINFIRM && USB
	---help---
	A driver for Marvell Libertas 8388 USB devices using thinfirm.

	config AIRO
	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
	depends on ISA_DMA_API && (PCI \|\| BROKEN)
	select WIRELESS_EXT
	select CRYPTO
	select WEXT_SPY
	select WEXT_PRIV
	---help---
	This is the standard Linux driver to support Cisco/Aironet ISA and
	PCI 802.11 wireless cards.
	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	- with or without encryption) as well as card before the Cisco
	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

	This driver support both the standard Linux Wireless Extensions
	and Cisco proprietary API, so both the Linux Wireless Tools and the
	Cisco Linux utilities can be used to configure the card.

	The driver can be compiled as a module and will be named "airo".

	config ATMEL
	tristate "Atmel at76c50x chipset 802.11b support"
	depends on (PCI \|\| PCMCIA)
	select WIRELESS_EXT
	select WEXT_PRIV
	select FW_LOADER
	select CRC32
	---help---
	A driver 802.11b wireless cards based on the Atmel fast-vnet
	chips. This driver supports standard Linux wireless extensions.

	Many cards based on this chipset do not have flash memory
	and need their firmware loaded at start-up. If yours is
	one of these, you will need to provide a firmware image
	to be loaded into the card by the driver. The Atmel
	firmware package can be downloaded from
	<http://www.thekelleys.org.uk/atmel>

	config PCI_ATMEL
	tristate "Atmel at76c506 PCI cards"
	depends on ATMEL && PCI
	---help---
	Enable support for PCI and mini-PCI cards containing the
	Atmel at76c506 chip.

	config PCMCIA_ATMEL
	tristate "Atmel at76c502/at76c504 PCMCIA cards"
	depends on ATMEL && PCMCIA
	select WIRELESS_EXT
	select FW_LOADER
	select CRC32
	---help---
	Enable support for PCMCIA cards containing the
	Atmel at76c502 and at76c504 chips.

	config AT76C50X_USB
	tristate "Atmel at76c503/at76c505/at76c505a USB cards"
	depends on MAC80211 && USB
	select FW_LOADER
	---help---
	Enable support for USB Wireless devices using Atmel at76c503,
	at76c505 or at76c505a chips.

	config AIRO_CS
	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
	depends on PCMCIA && (BROKEN \|\| !M32R)
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	select CRYPTO
	select CRYPTO_AES
	---help---
	This is the standard Linux driver to support Cisco/Aironet PCMCIA
	802.11 wireless cards. This driver is the same as the Aironet
	driver part of the Linux Pcmcia package.
	It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
	- with or without encryption) as well as card before the Cisco
	acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
	supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
	802.11b cards.

	This driver support both the standard Linux Wireless Extensions
	and Cisco proprietary API, so both the Linux Wireless Tools and the
	Cisco Linux utilities can be used to configure the card.

	config PCMCIA_WL3501
	tristate "Planet WL3501 PCMCIA cards"
	depends on PCMCIA
	select WIRELESS_EXT
	select WEXT_SPY
	help
	A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
	It has basic support for Linux wireless extensions and initial
	micro support for ethtool.

	config PRISM54
	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
	depends on PCI
	select WIRELESS_EXT
	select WEXT_SPY
	select WEXT_PRIV
	select FW_LOADER
	---help---
	This enables support for FullMAC PCI/Cardbus prism54 devices. This
	driver is now deprecated in favor for the SoftMAC driver, p54pci.
	p54pci supports FullMAC PCI/Cardbus devices as well.

	For more information refer to the p54 wiki:

	http://wireless.kernel.org/en/users/Drivers/p54

	Note: You need a motherboard with DMA support to use any of these cards

	When built as module you get the module prism54

	config USB_ZD1201
	tristate "USB ZD1201 based Wireless device support"
	depends on USB
	select WIRELESS_EXT
	select WEXT_PRIV
	select FW_LOADER
	---help---
	Say Y if you want to use wireless LAN adapters based on the ZyDAS
	ZD1201 chip.

	This driver makes the adapter appear as a normal Ethernet interface,
	typically on wlan0.

	The zd1201 device requires external firmware to be loaded.
	This can be found at http://linux-lc100020.sourceforge.net/

	To compile this driver as a module, choose M here: the
	module will be called zd1201.

	config USB_NET_RNDIS_WLAN
	tristate "Wireless RNDIS USB support"
	depends on USB
	depends on CFG80211
	select USB_USBNET
	select USB_NET_CDCETHER
	select USB_NET_RNDIS_HOST
	---help---
	This is a driver for wireless RNDIS devices.
	These are USB based adapters found in devices such as:

	Buffalo WLI-U2-KG125S
	U.S. Robotics USR5421
	Belkin F5D7051
	Linksys WUSB54GSv2
	Linksys WUSB54GSC
	Asus WL169gE
	Eminent EM4045
	BT Voyager 1055
	Linksys WUSB54GSv1
	U.S. Robotics USR5420
	BUFFALO WLI-USB-G54

	All of these devices are based on Broadcom 4320 chip which is the
	only wireless RNDIS chip known to date.

	If you choose to build a module, it'll be called rndis_wlan.

	source "drivers/net/wireless/rtl818x/Kconfig"

	config ADM8211
	tristate "ADMtek ADM8211 support"
	depends on MAC80211 && PCI
	select CRC32
	select EEPROM_93CX6
	---help---
	This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
	These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:

	Xterasys Cardbus XN-2411b
	Blitz NetWave Point PC
	TrendNet 221pc
	Belkin F5D6001
	SMC 2635W
	Linksys WPC11 v1
	Fiberline FL-WL-200X
	3com Office Connect (3CRSHPW796)
	Corega WLPCIB-11
	SMC 2602W V2 EU
	D-Link DWL-520 Revision C

	However, some of these cards have been replaced with other chips
	like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
	the Ralink RT2400 (SMC2635W) without a model number change.

	Thanks to Infineon-ADMtek for their support of this driver.

	config MAC80211_HWSIM
	tristate "Simulated radio testing tool for mac80211"
	depends on MAC80211
	---help---
	This driver is a developer testing tool that can be used to test
	IEEE 802.11 networking stack (mac80211) functionality. This is not
	needed for normal wireless LAN usage and is only for testing. See
	Documentation/networking/mac80211_hwsim for more information on how
	to use this tool.

	To compile this driver as a module, choose M here: the module will be
	called mac80211_hwsim. If unsure, say N.

	config MWL8K
	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
	depends on MAC80211 && PCI
	---help---
	This driver supports Marvell TOPDOG 802.11 wireless cards.

	To compile this driver as a module, choose M here: the module
	will be called mwl8k. If unsure, say N.

	source "drivers/net/wireless/ath/Kconfig"
	source "drivers/net/wireless/b43/Kconfig"
	source "drivers/net/wireless/b43legacy/Kconfig"
	source "drivers/net/wireless/brcm80211/Kconfig"
	source "drivers/net/wireless/hostap/Kconfig"
	source "drivers/net/wireless/ipw2x00/Kconfig"
	source "drivers/net/wireless/iwlwifi/Kconfig"
	source "drivers/net/wireless/iwlegacy/Kconfig"
	source "drivers/net/wireless/libertas/Kconfig"
	source "drivers/net/wireless/orinoco/Kconfig"
	source "drivers/net/wireless/p54/Kconfig"
	source "drivers/net/wireless/rt2x00/Kconfig"
	source "drivers/net/wireless/rtlwifi/Kconfig"
	source "drivers/net/wireless/ti/Kconfig"
	source "drivers/net/wireless/zd1211rw/Kconfig"
	source "drivers/net/wireless/mwifiex/Kconfig"

	endif # WLAN