| config HOSTAP | |
| tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" | |
| select WIRELESS_EXT | |
| select WEXT_SPY | |
| select WEXT_PRIV | |
| select CRYPTO | |
| select CRYPTO_ARC4 | |
| select CRYPTO_ECB | |
| select CRYPTO_AES | |
| select CRYPTO_MICHAEL_MIC | |
| select CRYPTO_ECB | |
| select CRC32 | |
| select LIB80211 | |
| select LIB80211_CRYPT_WEP | |
| select LIB80211_CRYPT_TKIP | |
| select LIB80211_CRYPT_CCMP | |
| ---help--- | |
| Shared driver code for IEEE 802.11b wireless cards based on | |
| Intersil Prism2/2.5/3 chipset. This driver supports so called | |
| Host AP mode that allows the card to act as an IEEE 802.11 | |
| access point. | |
| See <http://hostap.epitest.fi/> for more information about the | |
| Host AP driver configuration and tools. This site includes | |
| information and tools (hostapd and wpa_supplicant) for WPA/WPA2 | |
| support. | |
| This option includes the base Host AP driver code that is shared by | |
| different hardware models. You will also need to enable support for | |
| PLX/PCI/CS version of the driver to actually use the driver. | |
| The driver can be compiled as a module and it will be called | |
| hostap. | |
| config HOSTAP_FIRMWARE | |
| bool "Support downloading firmware images with Host AP driver" | |
| depends on HOSTAP | |
| ---help--- | |
| Configure Host AP driver to include support for firmware image | |
| download. This option by itself only enables downloading to the | |
| volatile memory, i.e. the card RAM. This option is required to | |
| support cards that don't have firmware in flash, such as D-Link | |
| DWL-520 rev E and D-Link DWL-650 rev P. | |
| Firmware image downloading needs a user space tool, prism2_srec. | |
| It is available from http://hostap.epitest.fi/. | |
| config HOSTAP_FIRMWARE_NVRAM | |
| bool "Support for non-volatile firmware download" | |
| depends on HOSTAP_FIRMWARE | |
| ---help--- | |
| Allow Host AP driver to write firmware images to the non-volatile | |
| card memory, i.e. flash memory that survives power cycling. | |
| Enable this option if you want to be able to change card firmware | |
| permanently. | |
| Firmware image downloading needs a user space tool, prism2_srec. | |
| It is available from http://hostap.epitest.fi/. | |
| config HOSTAP_PLX | |
| tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" | |
| depends on PCI && HOSTAP | |
| ---help--- | |
| Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based | |
| PCI adaptors. | |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this | |
| driver and its help text includes more information about the Host AP | |
| driver. | |
| The driver can be compiled as a module and will be named | |
| hostap_plx. | |
| config HOSTAP_PCI | |
| tristate "Host AP driver for Prism2.5 PCI adaptors" | |
| depends on PCI && HOSTAP | |
| ---help--- | |
| Host AP driver's version for Prism2.5 PCI adaptors. | |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this | |
| driver and its help text includes more information about the Host AP | |
| driver. | |
| The driver can be compiled as a module and will be named | |
| hostap_pci. | |
| config HOSTAP_CS | |
| tristate "Host AP driver for Prism2/2.5/3 PC Cards" | |
| depends on PCMCIA && HOSTAP | |
| ---help--- | |
| Host AP driver's version for Prism2/2.5/3 PC Cards. | |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this | |
| driver and its help text includes more information about the Host AP | |
| driver. | |
| The driver can be compiled as a module and will be named | |
| hostap_cs. |