| # | |
| # PINCTRL infrastructure and drivers | |
| # | |
| config PINCTRL | |
| bool | |
| if PINCTRL | |
| menu "Pin controllers" | |
| depends on PINCTRL | |
| config PINMUX | |
| bool "Support pin multiplexing controllers" | |
| config PINCONF | |
| bool "Support pin configuration controllers" | |
| config GENERIC_PINCONF | |
| bool | |
| select PINCONF | |
| config DEBUG_PINCTRL | |
| bool "Debug PINCTRL calls" | |
| depends on DEBUG_KERNEL | |
| help | |
| Say Y here to add some extra checks and diagnostics to PINCTRL calls. | |
| config PINCTRL_ABX500 | |
| bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" | |
| depends on AB8500_CORE | |
| select GENERIC_PINCONF | |
| help | |
| Select this to enable the ABx500 family IC GPIO driver | |
| config PINCTRL_AB8500 | |
| bool "AB8500 pin controller driver" | |
| depends on PINCTRL_ABX500 && ARCH_U8500 | |
| config PINCTRL_AB8540 | |
| bool "AB8540 pin controller driver" | |
| depends on PINCTRL_ABX500 && ARCH_U8500 | |
| config PINCTRL_AB9540 | |
| bool "AB9540 pin controller driver" | |
| depends on PINCTRL_ABX500 && ARCH_U8500 | |
| config PINCTRL_AB8505 | |
| bool "AB8505 pin controller driver" | |
| depends on PINCTRL_ABX500 && ARCH_U8500 | |
| config PINCTRL_AT91 | |
| bool "AT91 pinctrl driver" | |
| depends on OF | |
| depends on ARCH_AT91 | |
| select PINMUX | |
| select PINCONF | |
| help | |
| Say Y here to enable the at91 pinctrl driver | |
| config PINCTRL_BCM2835 | |
| bool | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_IMX | |
| bool | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_IMX35 | |
| bool "IMX35 pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX35 | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx35 pinctrl driver | |
| config PINCTRL_IMX51 | |
| bool "IMX51 pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX51 | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx51 pinctrl driver | |
| config PINCTRL_IMX53 | |
| bool "IMX53 pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX53 | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx53 pinctrl driver | |
| config PINCTRL_IMX6Q | |
| bool "IMX6Q/DL pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX6Q | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx6q/dl pinctrl driver | |
| config PINCTRL_IMX6SL | |
| bool "IMX6SL pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX6SL | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx6sl pinctrl driver | |
| config PINCTRL_IMX6SX | |
| bool "IMX6SX pinctrl driver" | |
| depends on OF | |
| depends on SOC_IMX6SX | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the imx6sx pinctrl driver | |
| config PINCTRL_VF610 | |
| bool "Freescale Vybrid VF610 pinctrl driver" | |
| depends on OF | |
| depends on SOC_VF610 | |
| select PINCTRL_IMX | |
| help | |
| Say Y here to enable the Freescale Vybrid VF610 pinctrl driver | |
| config PINCTRL_LANTIQ | |
| bool | |
| depends on LANTIQ | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_FALCON | |
| bool | |
| depends on SOC_FALCON | |
| depends on PINCTRL_LANTIQ | |
| config PINCTRL_MXS | |
| bool | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_IMX23 | |
| bool | |
| select PINCTRL_MXS | |
| config PINCTRL_IMX28 | |
| bool | |
| select PINCTRL_MXS | |
| config PINCTRL_NOMADIK | |
| bool "Nomadik pin controller driver" | |
| depends on ARCH_U8500 || ARCH_NOMADIK | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_STN8815 | |
| bool "STN8815 pin controller driver" | |
| depends on PINCTRL_NOMADIK && ARCH_NOMADIK | |
| config PINCTRL_DB8500 | |
| bool "DB8500 pin controller driver" | |
| depends on PINCTRL_NOMADIK && ARCH_U8500 | |
| config PINCTRL_DB8540 | |
| bool "DB8540 pin controller driver" | |
| depends on PINCTRL_NOMADIK && ARCH_U8500 | |
| config PINCTRL_SINGLE | |
| tristate "One-register-per-pin type device tree based pinctrl driver" | |
| depends on OF | |
| select PINMUX | |
| select PINCONF | |
| select GENERIC_PINCONF | |
| help | |
| This selects the device tree based generic pinctrl driver. | |
| config PINCTRL_SIRF | |
| bool "CSR SiRFprimaII/SiRFmarco pin controller driver" | |
| depends on ARCH_SIRF | |
| select PINMUX | |
| config PINCTRL_SUNXI | |
| bool | |
| select PINMUX | |
| select GENERIC_PINCONF | |
| config PINCTRL_TEGRA | |
| bool | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_TEGRA20 | |
| bool | |
| select PINCTRL_TEGRA | |
| config PINCTRL_TEGRA30 | |
| bool | |
| select PINCTRL_TEGRA | |
| config PINCTRL_TEGRA114 | |
| bool | |
| select PINCTRL_TEGRA | |
| config PINCTRL_U300 | |
| bool "U300 pin controller driver" | |
| depends on ARCH_U300 | |
| select PINMUX | |
| select GENERIC_PINCONF | |
| config PINCTRL_COH901 | |
| bool "ST-Ericsson U300 COH 901 335/571 GPIO" | |
| depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 | |
| help | |
| Say yes here to support GPIO interface on ST-Ericsson U300. | |
| The names of the two IP block variants supported are | |
| COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 | |
| ports of 8 GPIO pins each. | |
| config PINCTRL_SAMSUNG | |
| bool | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_EXYNOS | |
| bool "Pinctrl driver data for Samsung EXYNOS SoCs" | |
| depends on OF && GPIOLIB | |
| select PINCTRL_SAMSUNG | |
| config PINCTRL_EXYNOS5440 | |
| bool "Samsung EXYNOS5440 SoC pinctrl driver" | |
| select PINMUX | |
| select PINCONF | |
| config PINCTRL_S3C64XX | |
| bool "Samsung S3C64XX SoC pinctrl driver" | |
| depends on ARCH_S3C64XX | |
| select PINCTRL_SAMSUNG | |
| source "drivers/pinctrl/mvebu/Kconfig" | |
| source "drivers/pinctrl/sh-pfc/Kconfig" | |
| source "drivers/pinctrl/spear/Kconfig" | |
| source "drivers/pinctrl/vt8500/Kconfig" | |
| config PINCTRL_XWAY | |
| bool | |
| depends on SOC_TYPE_XWAY | |
| depends on PINCTRL_LANTIQ | |
| endmenu | |
| endif |