| menuconfig POWER_SUPPLY | |
| bool "Power supply class support" | |
| help | |
| Say Y here to enable power supply class support. This allows | |
| power supply (batteries, AC, USB) monitoring by userspace | |
| via sysfs and uevent (if available) and/or APM kernel interface | |
| (if selected below). | |
| if POWER_SUPPLY | |
| config POWER_SUPPLY_DEBUG | |
| bool "Power supply debug" | |
| help | |
| Say Y here to enable debugging messages for power supply class | |
| and drivers. | |
| config PDA_POWER | |
| tristate "Generic PDA/phone power driver" | |
| depends on !S390 | |
| help | |
| Say Y here to enable generic power driver for PDAs and phones with | |
| one or two external power supplies (AC/USB) connected to main and | |
| backup batteries, and optional builtin charger. | |
| config APM_POWER | |
| tristate "APM emulation for class batteries" | |
| depends on APM_EMULATION | |
| help | |
| Say Y here to enable support APM status emulation using | |
| battery class devices. | |
| config GENERIC_ADC_BATTERY | |
| tristate "Generic battery support using IIO" | |
| depends on IIO | |
| help | |
| Say Y here to enable support for the generic battery driver | |
| which uses IIO framework to read adc. | |
| config MAX8925_POWER | |
| tristate "MAX8925 battery charger support" | |
| depends on MFD_MAX8925 | |
| help | |
| Say Y here to enable support for the battery charger in the Maxim | |
| MAX8925 PMIC. | |
| config WM831X_BACKUP | |
| tristate "WM831X backup battery charger support" | |
| depends on MFD_WM831X | |
| help | |
| Say Y here to enable support for the backup battery charger | |
| in the Wolfson Microelectronics WM831x PMICs. | |
| config WM831X_POWER | |
| tristate "WM831X PMU support" | |
| depends on MFD_WM831X | |
| help | |
| Say Y here to enable support for the power management unit | |
| provided by Wolfson Microelectronics WM831x PMICs. | |
| config WM8350_POWER | |
| tristate "WM8350 PMU support" | |
| depends on MFD_WM8350 | |
| help | |
| Say Y here to enable support for the power management unit | |
| provided by the Wolfson Microelectronics WM8350 PMIC. | |
| config TEST_POWER | |
| tristate "Test power driver" | |
| help | |
| This driver is used for testing. It's safe to say M here. | |
| config BATTERY_88PM860X | |
| tristate "Marvell 88PM860x battery driver" | |
| depends on MFD_88PM860X | |
| help | |
| Say Y here to enable battery monitor for Marvell 88PM860x chip. | |
| config BATTERY_DS2760 | |
| tristate "DS2760 battery driver (HP iPAQ & others)" | |
| depends on W1 && W1_SLAVE_DS2760 | |
| help | |
| Say Y here to enable support for batteries with ds2760 chip. | |
| config BATTERY_DS2780 | |
| tristate "DS2780 battery driver" | |
| depends on HAS_IOMEM | |
| select W1 | |
| select W1_SLAVE_DS2780 | |
| help | |
| Say Y here to enable support for batteries with ds2780 chip. | |
| config BATTERY_DS2781 | |
| tristate "DS2781 battery driver" | |
| depends on HAS_IOMEM | |
| select W1 | |
| select W1_SLAVE_DS2781 | |
| help | |
| If you enable this you will have the DS2781 battery driver support. | |
| The battery monitor chip is used in many batteries/devices | |
| as the one who is responsible for charging/discharging/monitoring | |
| Li+ batteries. | |
| If you are unsure, say N. | |
| config BATTERY_DS2782 | |
| tristate "DS2782/DS2786 standalone gas-gauge" | |
| depends on I2C | |
| help | |
| Say Y here to enable support for the DS2782/DS2786 standalone battery | |
| gas-gauge. | |
| config BATTERY_PMU | |
| tristate "Apple PMU battery" | |
| depends on PPC32 && ADB_PMU | |
| help | |
| Say Y here to expose battery information on Apple machines | |
| through the generic battery class. | |
| config BATTERY_OLPC | |
| tristate "One Laptop Per Child battery" | |
| depends on X86_32 && OLPC | |
| help | |
| Say Y to enable support for the battery on the OLPC laptop. | |
| config BATTERY_TOSA | |
| tristate "Sharp SL-6000 (tosa) battery" | |
| depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX | |
| help | |
| Say Y to enable support for the battery on the Sharp Zaurus | |
| SL-6000 (tosa) models. | |
| config BATTERY_COLLIE | |
| tristate "Sharp SL-5500 (collie) battery" | |
| depends on SA1100_COLLIE && MCP_UCB1200 | |
| help | |
| Say Y to enable support for the battery on the Sharp Zaurus | |
| SL-5500 (collie) models. | |
| config BATTERY_WM97XX | |
| bool "WM97xx generic battery driver" | |
| depends on TOUCHSCREEN_WM97XX=y | |
| help | |
| Say Y to enable support for battery measured by WM97xx aux port. | |
| config BATTERY_SBS | |
| tristate "SBS Compliant gas gauge" | |
| depends on I2C | |
| help | |
| Say Y to include support for SBS battery driver for SBS-compliant | |
| gas gauges. | |
| config BATTERY_BQ27x00 | |
| tristate "BQ27x00 battery driver" | |
| depends on I2C || I2C=n | |
| help | |
| Say Y here to enable support for batteries with BQ27x00 (I2C/HDQ) chips. | |
| config BATTERY_BQ27X00_I2C | |
| bool "BQ27200/BQ27500 support" | |
| depends on BATTERY_BQ27x00 | |
| depends on I2C | |
| default y | |
| help | |
| Say Y here to enable support for batteries with BQ27x00 (I2C) chips. | |
| config BATTERY_BQ27X00_PLATFORM | |
| bool "BQ27000 support" | |
| depends on BATTERY_BQ27x00 | |
| default y | |
| help | |
| Say Y here to enable support for batteries with BQ27000 (HDQ) chips. | |
| config BATTERY_DA9030 | |
| tristate "DA9030 battery driver" | |
| depends on PMIC_DA903X | |
| help | |
| Say Y here to enable support for batteries charger integrated into | |
| DA9030 PMIC. | |
| config BATTERY_DA9052 | |
| tristate "Dialog DA9052 Battery" | |
| depends on PMIC_DA9052 | |
| help | |
| Say Y here to enable support for batteries charger integrated into | |
| DA9052 PMIC. | |
| config BATTERY_MAX17040 | |
| tristate "Maxim MAX17040 Fuel Gauge" | |
| depends on I2C | |
| help | |
| MAX17040 is fuel-gauge systems for lithium-ion (Li+) batteries | |
| in handheld and portable equipment. The MAX17040 is configured | |
| to operate with a single lithium cell | |
| config BATTERY_MAX17042 | |
| tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge" | |
| depends on I2C | |
| help | |
| MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries | |
| in handheld and portable equipment. The MAX17042 is configured | |
| to operate with a single lithium cell. MAX8997 and MAX8966 are | |
| multi-function devices that include fuel gauages that are compatible | |
| with MAX17042. This driver also supports max17047/50 chips which are | |
| improved version of max17042. | |
| config BATTERY_Z2 | |
| tristate "Z2 battery driver" | |
| depends on I2C && MACH_ZIPIT2 | |
| help | |
| Say Y to include support for the battery on the Zipit Z2. | |
| config BATTERY_S3C_ADC | |
| tristate "Battery driver for Samsung ADC based monitoring" | |
| depends on S3C_ADC | |
| help | |
| Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery | |
| config CHARGER_88PM860X | |
| tristate "Marvell 88PM860x Charger driver" | |
| depends on MFD_88PM860X && BATTERY_88PM860X | |
| help | |
| Say Y here to enable charger for Marvell 88PM860x chip. | |
| config CHARGER_PCF50633 | |
| tristate "NXP PCF50633 MBC" | |
| depends on MFD_PCF50633 | |
| help | |
| Say Y to include support for NXP PCF50633 Main Battery Charger. | |
| config BATTERY_JZ4740 | |
| tristate "Ingenic JZ4740 battery" | |
| depends on MACH_JZ4740 | |
| depends on MFD_JZ4740_ADC | |
| help | |
| Say Y to enable support for the battery on Ingenic JZ4740 based | |
| boards. | |
| This driver can be build as a module. If so, the module will be | |
| called jz4740-battery. | |
| config BATTERY_INTEL_MID | |
| tristate "Battery driver for Intel MID platforms" | |
| depends on INTEL_SCU_IPC && SPI | |
| help | |
| Say Y here to enable the battery driver on Intel MID | |
| platforms. | |
| config BATTERY_RX51 | |
| tristate "Nokia RX-51 (N900) battery driver" | |
| depends on TWL4030_MADC | |
| help | |
| Say Y here to enable support for battery information on Nokia | |
| RX-51, also known as N900 tablet. | |
| config CHARGER_ISP1704 | |
| tristate "ISP1704 USB Charger Detection" | |
| depends on USB_PHY | |
| help | |
| Say Y to enable support for USB Charger Detection with | |
| ISP1707/ISP1704 USB transceivers. | |
| config CHARGER_MAX8903 | |
| tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" | |
| depends on GENERIC_HARDIRQS | |
| help | |
| Say Y to enable support for the MAX8903 DC-DC charger and sysfs. | |
| The driver supports controlling charger-enable and current-limit | |
| pins based on the status of charger connections with interrupt | |
| handlers. | |
| config SABRESD_MAX8903 | |
| tristate "Sabresd Board Battery DC-DC Charger for USB and Adapter Power" | |
| depends on GENERIC_HARDIRQS && TOUCHSCREEN_MAX11801 | |
| help | |
| Say Y to enable support for the MAX8903 DC-DC charger and sysfs on | |
| sabresd board.The driver supports controlling charger and battery | |
| based on the status of charger connections with interrupt handlers. | |
| config CHARGER_TWL4030 | |
| tristate "OMAP TWL4030 BCI charger driver" | |
| depends on TWL4030_CORE | |
| help | |
| Say Y here to enable support for TWL4030 Battery Charge Interface. | |
| config CHARGER_LP8727 | |
| tristate "TI/National Semiconductor LP8727 charger driver" | |
| depends on I2C | |
| help | |
| Say Y here to enable support for LP8727 Charger Driver. | |
| config CHARGER_LP8788 | |
| tristate "TI LP8788 charger driver" | |
| depends on MFD_LP8788 | |
| depends on LP8788_ADC | |
| depends on IIO | |
| help | |
| Say Y to enable support for the LP8788 linear charger. | |
| config CHARGER_GPIO | |
| tristate "GPIO charger" | |
| depends on GPIOLIB | |
| help | |
| Say Y to include support for chargers which report their online status | |
| through a GPIO pin. | |
| This driver can be build as a module. If so, the module will be | |
| called gpio-charger. | |
| config CHARGER_MANAGER | |
| bool "Battery charger manager for multiple chargers" | |
| depends on REGULATOR && RTC_CLASS | |
| select EXTCON | |
| help | |
| Say Y to enable charger-manager support, which allows multiple | |
| chargers attached to a battery and multiple batteries attached to a | |
| system. The charger-manager also can monitor charging status in | |
| runtime and in suspend-to-RAM by waking up the system periodically | |
| with help of suspend_again support. | |
| config CHARGER_MAX8997 | |
| tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver" | |
| depends on MFD_MAX8997 && REGULATOR_MAX8997 | |
| help | |
| Say Y to enable support for the battery charger control sysfs and | |
| platform data of MAX8997/LP3974 PMICs. | |
| config CHARGER_MAX8998 | |
| tristate "Maxim MAX8998/LP3974 PMIC battery charger driver" | |
| depends on MFD_MAX8998 && REGULATOR_MAX8998 | |
| help | |
| Say Y to enable support for the battery charger control sysfs and | |
| platform data of MAX8998/LP3974 PMICs. | |
| config CHARGER_BQ2415X | |
| tristate "TI BQ2415x battery charger driver" | |
| depends on I2C | |
| help | |
| Say Y to enable support for the TI BQ2415x battery charger | |
| PMICs. | |
| You'll need this driver to charge batteries on e.g. Nokia | |
| RX-51/N900. | |
| config CHARGER_BQ24251 | |
| tristate "TI BQ24251 battery charger driver" | |
| depends on I2C | |
| help | |
| Say Y here to enable support for the TI BQ24251 battery charger. | |
| config CHARGER_BQ24251_FORCE_2A | |
| bool "Force Input Current Limit to 2 Amps" | |
| depends on CHARGER_BQ24251 | |
| default n | |
| help | |
| Say Y here to force the input current limit to 2A regardless of | |
| what the charger is plugged into. | |
| config CHARGER_BQ24251_POWER_OFF | |
| bool "Add logic to use SYSOFF as the power off mechanism" | |
| depends on CHARGER_BQ24251 | |
| default n | |
| help | |
| Say Y here to register a pm_power_off hook that uses the charger | |
| SYSOFF capabilities to turn off the board. | |
| config CHARGER_SMB347 | |
| tristate "Summit Microelectronics SMB347 Battery Charger" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say Y to include support for Summit Microelectronics SMB347 | |
| Battery Charger. | |
| config CHARGER_TPS65090 | |
| tristate "TPS65090 battery charger driver" | |
| depends on MFD_TPS65090 | |
| help | |
| Say Y here to enable support for battery charging with TPS65090 | |
| PMIC chips. | |
| config AB8500_BM | |
| bool "AB8500 Battery Management Driver" | |
| depends on AB8500_CORE && AB8500_GPADC | |
| help | |
| Say Y to include support for AB8500 battery management. | |
| config BATTERY_GOLDFISH | |
| tristate "Goldfish battery driver" | |
| depends on GENERIC_HARDIRQS | |
| help | |
| Say Y to enable support for the battery and AC power in the | |
| Goldfish emulator. | |
| config IMX6_USB_CHARGER | |
| bool "Freescale imx6 USB Charger" | |
| depends on SOC_IMX6Q || SOC_IMX6SL | |
| help | |
| Say Y to enable Freescale imx6 USB Charger Detect. | |
| config BATTERY_ADC_DIV | |
| tristate "Battery Voltage via Divider and ADC" | |
| depends on IIO | |
| help | |
| Say Y to enable support for reading a battery voltage using | |
| a voltage divider circuit and an IIO ADC. | |
| source "drivers/power/reset/Kconfig" | |
| endif # POWER_SUPPLY | |
| source "drivers/power/avs/Kconfig" |