| # | |
| # USB Serial device configuration | |
| # | |
| menuconfig USB_SERIAL | |
| tristate "USB Serial Converter support" | |
| depends on TTY | |
| ---help--- | |
| Say Y here if you have a USB device that provides normal serial | |
| ports, or acts like a serial device, and you want to connect it to | |
| your USB bus. | |
| Please read <file:Documentation/usb/usb-serial.txt> for more | |
| information on the specifics of the different devices that are | |
| supported, and on how to use them. | |
| To compile this driver as a module, choose M here: the | |
| module will be called usbserial. | |
| if USB_SERIAL | |
| config USB_SERIAL_CONSOLE | |
| bool "USB Serial Console device support" | |
| depends on USB_SERIAL=y | |
| ---help--- | |
| If you say Y here, it will be possible to use a USB to serial | |
| converter port as the system console (the system console is the | |
| device which receives all kernel messages and warnings and which | |
| allows logins in single user mode). This could be useful if some | |
| terminal or printer is connected to that serial port. | |
| Even if you say Y here, the currently visible virtual console | |
| (/dev/tty0) will still be used as the system console by default, but | |
| you can alter that using a kernel command line option such as | |
| "console=ttyUSB0". (Try "man bootparam" or see the documentation of | |
| your boot loader (lilo or loadlin) about how to pass options to the | |
| kernel at boot time.) | |
| If you don't have a VGA card installed and you say Y here, the | |
| kernel will automatically use the first USB to serial converter | |
| port, /dev/ttyUSB0, as system console. | |
| If unsure, say N. | |
| config USB_SERIAL_GENERIC | |
| bool "USB Generic Serial Driver" | |
| help | |
| Say Y here if you want to use the generic USB serial driver. Please | |
| read <file:Documentation/usb/usb-serial.txt> for more information on | |
| using this driver. It is recommended that the "USB Serial converter | |
| support" be compiled as a module for this driver to be used | |
| properly. | |
| config USB_SERIAL_SIMPLE | |
| tristate "USB Serial Simple Driver" | |
| help | |
| Say Y here to use the USB serial "simple" driver. This driver | |
| handles a wide range of very simple devices, all in one | |
| driver. | |
| config USB_SERIAL_AIRCABLE | |
| tristate "USB AIRcable Bluetooth Dongle Driver" | |
| help | |
| Say Y here if you want to use USB AIRcable Bluetooth Dongle. | |
| To compile this driver as a module, choose M here: the module | |
| will be called aircable. | |
| config USB_SERIAL_ARK3116 | |
| tristate "USB ARK Micro 3116 USB Serial Driver" | |
| help | |
| Say Y here if you want to use a ARK Micro 3116 USB to Serial | |
| device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ark3116 | |
| config USB_SERIAL_BELKIN | |
| tristate "USB Belkin and Peracom Single Port Serial Driver" | |
| help | |
| Say Y here if you want to use a Belkin USB Serial single port | |
| adaptor (F5U103 is one of the model numbers) or the Peracom single | |
| port USB to serial adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called belkin_sa. | |
| config USB_SERIAL_CH341 | |
| tristate "USB Winchiphead CH341 Single Port Serial Driver" | |
| help | |
| Say Y here if you want to use a Winchiphead CH341 single port | |
| USB to serial adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ch341. | |
| config USB_SERIAL_WHITEHEAT | |
| tristate "USB ConnectTech WhiteHEAT Serial Driver" | |
| select USB_EZUSB_FX2 | |
| help | |
| Say Y here if you want to use a ConnectTech WhiteHEAT 4 port | |
| USB to serial converter device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called whiteheat. | |
| config USB_SERIAL_DIGI_ACCELEPORT | |
| tristate "USB Digi International AccelePort USB Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use Digi AccelePort USB 2 or 4 devices, | |
| 2 port (plus parallel port) and 4 port USB serial converters. The | |
| parallel port on the USB 2 appears as a third serial port on Linux. | |
| The Digi Acceleport USB 8 is not yet supported by this driver. | |
| This driver works under SMP with the usb-uhci driver. It does not | |
| work under SMP with the uhci driver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called digi_acceleport. | |
| config USB_SERIAL_CP210X | |
| tristate "USB CP210x family of UART Bridge Controllers" | |
| help | |
| Say Y here if you want to use a CP2101/CP2102/CP2103 based USB | |
| to RS232 converters. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cp210x. | |
| config USB_SERIAL_CYPRESS_M8 | |
| tristate "USB Cypress M8 USB Serial Driver" | |
| help | |
| Say Y here if you want to use a device that contains the Cypress | |
| USB to Serial microcontroller, such as the DeLorme Earthmate GPS. | |
| Attempted SMP support... send bug reports! | |
| Supported microcontrollers in the CY4601 family are: | |
| CY7C63741 CY7C63742 CY7C63743 CY7C64013 | |
| To compile this driver as a module, choose M here: the | |
| module will be called cypress_m8. | |
| config USB_SERIAL_EMPEG | |
| tristate "USB Empeg empeg-car Mark I/II Driver" | |
| help | |
| Say Y here if you want to connect to your Empeg empeg-car Mark I/II | |
| mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...} | |
| device node. See <file:Documentation/usb/usb-serial.txt> for more | |
| tidbits of information. | |
| To compile this driver as a module, choose M here: the | |
| module will be called empeg. | |
| config USB_SERIAL_FTDI_SIO | |
| tristate "USB FTDI Single Port Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use a FTDI SIO single port USB to serial | |
| converter device. The implementation I have is called the USC-1000. | |
| This driver has also be tested with the 245 and 232 devices. | |
| See <http://ftdi-usb-sio.sourceforge.net/> for more | |
| information on this driver and the device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ftdi_sio. | |
| config USB_SERIAL_FUNSOFT | |
| tristate "USB Fundamental Software Dongle Driver" | |
| ---help--- | |
| Say Y here if you want to use the Fundamental Software dongle. | |
| To compile this driver as a module, choose M here: the | |
| module will be called funsoft. | |
| config USB_SERIAL_VISOR | |
| tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver" | |
| help | |
| Say Y here if you want to connect to your HandSpring Visor, Palm | |
| m500 or m505 through its USB docking station. See | |
| <http://usbvisor.sourceforge.net/index.php3> for more information on using this | |
| driver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called visor. | |
| config USB_SERIAL_IPAQ | |
| tristate "USB PocketPC PDA Driver" | |
| help | |
| Say Y here if you want to connect to your Compaq iPAQ, HP Jornada | |
| or any other PDA running Windows CE 3.0 or PocketPC 2002 | |
| using a USB cradle/cable. For information on using the driver, | |
| read <file:Documentation/usb/usb-serial.txt>. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ipaq. | |
| config USB_SERIAL_IR | |
| tristate "USB IR Dongle Serial Driver" | |
| help | |
| Say Y here if you want to enable simple serial support for USB IrDA | |
| devices. This is useful if you do not want to use the full IrDA | |
| stack. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ir-usb. | |
| config USB_SERIAL_EDGEPORT | |
| tristate "USB Inside Out Edgeport Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use any of the following devices from | |
| Inside Out Networks (Digi): | |
| Edgeport/4 | |
| Rapidport/4 | |
| Edgeport/4t | |
| Edgeport/2 | |
| Edgeport/4i | |
| Edgeport/2i | |
| Edgeport/421 | |
| Edgeport/21 | |
| Edgeport/8 | |
| Edgeport/8 Dual | |
| Edgeport/2D8 | |
| Edgeport/4D8 | |
| Edgeport/8i | |
| Edgeport/2 DIN | |
| Edgeport/4 DIN | |
| Edgeport/16 Dual | |
| To compile this driver as a module, choose M here: the | |
| module will be called io_edgeport. | |
| config USB_SERIAL_EDGEPORT_TI | |
| tristate "USB Inside Out Edgeport Serial Driver (TI devices)" | |
| help | |
| Say Y here if you want to use any of the devices from Inside Out | |
| Networks (Digi) that are not supported by the io_edgeport driver. | |
| This includes the Edgeport/1 device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called io_ti. | |
| config USB_SERIAL_F81232 | |
| tristate "USB Fintek F81232 Single Port Serial Driver" | |
| help | |
| Say Y here if you want to use the Fintek F81232 single | |
| port usb to serial adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called f81232. | |
| config USB_SERIAL_GARMIN | |
| tristate "USB Garmin GPS driver" | |
| help | |
| Say Y here if you want to connect to your Garmin GPS. | |
| Should work with most Garmin GPS devices which have a native USB port. | |
| See <http://sourceforge.net/projects/garmin-gps> for the latest | |
| version of the driver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called garmin_gps. | |
| config USB_SERIAL_IPW | |
| tristate "USB IPWireless (3G UMTS TDD) Driver" | |
| select USB_SERIAL_WWAN | |
| help | |
| Say Y here if you want to use a IPWireless USB modem such as | |
| the ones supplied by Axity3G/Sentech South Africa. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ipw. | |
| config USB_SERIAL_IUU | |
| tristate "USB Infinity USB Unlimited Phoenix Driver" | |
| help | |
| Say Y here if you want to use a IUU in phoenix mode and get | |
| an extra ttyUSBx device. More information available on | |
| http://eczema.ecze.com/iuu_phoenix.html | |
| To compile this driver as a module, choose M here: the | |
| module will be called iuu_phoenix.o | |
| config USB_SERIAL_KEYSPAN_PDA | |
| tristate "USB Keyspan PDA Single Port Serial Driver" | |
| select USB_EZUSB_FX2 | |
| help | |
| Say Y here if you want to use a Keyspan PDA single port USB to | |
| serial converter device. This driver makes use of firmware | |
| developed from scratch by Brian Warner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called keyspan_pda. | |
| config USB_SERIAL_KEYSPAN | |
| tristate "USB Keyspan USA-xxx Serial Driver" | |
| select USB_EZUSB_FX2 | |
| ---help--- | |
| Say Y here if you want to use Keyspan USB to serial converter | |
| devices. This driver makes use of Keyspan's official firmware | |
| and was developed with their support. You must also include | |
| firmware to support your particular device(s). | |
| See <http://blemings.org/hugh/keyspan.html> for more information. | |
| To compile this driver as a module, choose M here: the | |
| module will be called keyspan. | |
| config USB_SERIAL_KEYSPAN_MPR | |
| bool "USB Keyspan MPR Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the Keyspan MPR converter. | |
| config USB_SERIAL_KEYSPAN_USA28 | |
| bool "USB Keyspan USA-28 Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-28 converter. | |
| config USB_SERIAL_KEYSPAN_USA28X | |
| bool "USB Keyspan USA-28X Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-28X converter. | |
| Be sure you have a USA-28X, there are also 28XA and 28XB | |
| models, the label underneath has the actual part number. | |
| config USB_SERIAL_KEYSPAN_USA28XA | |
| bool "USB Keyspan USA-28XA Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-28XA converter. | |
| Be sure you have a USA-28XA, there are also 28X and 28XB | |
| models, the label underneath has the actual part number. | |
| config USB_SERIAL_KEYSPAN_USA28XB | |
| bool "USB Keyspan USA-28XB Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-28XB converter. | |
| Be sure you have a USA-28XB, there are also 28X and 28XA | |
| models, the label underneath has the actual part number. | |
| config USB_SERIAL_KEYSPAN_USA19 | |
| bool "USB Keyspan USA-19 Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-19 converter. | |
| config USB_SERIAL_KEYSPAN_USA18X | |
| bool "USB Keyspan USA-18X Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-18X converter. | |
| config USB_SERIAL_KEYSPAN_USA19W | |
| bool "USB Keyspan USA-19W Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-19W converter. | |
| config USB_SERIAL_KEYSPAN_USA19QW | |
| bool "USB Keyspan USA-19QW Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-19QW converter. | |
| config USB_SERIAL_KEYSPAN_USA19QI | |
| bool "USB Keyspan USA-19QI Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-19QI converter. | |
| config USB_SERIAL_KEYSPAN_USA49W | |
| bool "USB Keyspan USA-49W Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-49W converter. | |
| config USB_SERIAL_KEYSPAN_USA49WLC | |
| bool "USB Keyspan USA-49WLC Firmware" | |
| depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL | |
| help | |
| Say Y here to include firmware for the USA-49WLC converter. | |
| config USB_SERIAL_KLSI | |
| tristate "USB KL5KUSB105 (Palmconnect) Driver" | |
| ---help--- | |
| Say Y here if you want to use a KL5KUSB105 - based single port | |
| serial adapter. The most widely known -- and currently the only | |
| tested -- device in this category is the PalmConnect USB Serial | |
| adapter sold by Palm Inc. for use with their Palm III and Palm V | |
| series PDAs. | |
| Please read <file:Documentation/usb/usb-serial.txt> for more | |
| information. | |
| To compile this driver as a module, choose M here: the | |
| module will be called kl5kusb105. | |
| config USB_SERIAL_KOBIL_SCT | |
| tristate "USB KOBIL chipcard reader" | |
| ---help--- | |
| Say Y here if you want to use one of the following KOBIL USB chipcard | |
| readers: | |
| - USB TWIN | |
| - KAAN Standard Plus | |
| - KAAN SIM | |
| - SecOVID Reader Plus | |
| - B1 Professional | |
| - KAAN Professional | |
| Note that you need a current CT-API. | |
| To compile this driver as a module, choose M here: the | |
| module will be called kobil_sct. | |
| config USB_SERIAL_MCT_U232 | |
| tristate "USB MCT Single Port Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use a USB Serial single port adapter from | |
| Magic Control Technology Corp. (U232 is one of the model numbers). | |
| This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB | |
| BAY, Belkin F5U109, and Belkin F5U409 devices. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mct_u232. | |
| config USB_SERIAL_METRO | |
| tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver" | |
| ---help--- | |
| Say Y here if you want to use a USB POS Metrologic barcode scanner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called metro-usb. | |
| config USB_SERIAL_MOS7720 | |
| tristate "USB Moschip 7720 Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use USB Serial single and double | |
| port adapters from Moschip Semiconductor Tech. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mos7720. | |
| config USB_SERIAL_MOS7715_PARPORT | |
| bool "Support for parallel port on the Moschip 7715" | |
| depends on USB_SERIAL_MOS7720 | |
| depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 | |
| select PARPORT_NOT_PC | |
| ---help--- | |
| Say Y if you have a Moschip 7715 device and would like to use | |
| the parallel port it provides. The port will register with | |
| the parport subsystem as a low-level driver. | |
| config USB_SERIAL_MOS7840 | |
| tristate "USB Moschip 7840/7820 USB Serial Driver" | |
| ---help--- | |
| Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820 | |
| Dual-Serial port device from MosChip Semiconductor. | |
| The MCS7840 and MCS7820 have been developed to connect a wide range | |
| of standard serial devices to a USB host. The MCS7840 has a USB | |
| device controller connected to four (4) individual UARTs while the | |
| MCS7820 controller connects to two (2) individual UARTs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mos7840. If unsure, choose N. | |
| config USB_SERIAL_MOTOROLA | |
| tristate "USB Motorola Phone modem driver" | |
| ---help--- | |
| Say Y here if you want to use a Motorola phone with a USB | |
| connector as a modem link. | |
| To compile this driver as a module, choose M here: the | |
| module will be called moto_modem. If unsure, choose N. | |
| config USB_SERIAL_NAVMAN | |
| tristate "USB Navman GPS device" | |
| help | |
| To compile this driver as a module, choose M here: the | |
| module will be called navman. | |
| config USB_SERIAL_PL2303 | |
| tristate "USB Prolific 2303 Single Port Serial Driver" | |
| help | |
| Say Y here if you want to use the PL2303 USB Serial single port | |
| adapter from Prolific. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pl2303. | |
| config USB_SERIAL_OTI6858 | |
| tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" | |
| help | |
| Say Y here if you want to use the OTi-6858 single port USB to serial | |
| converter device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called oti6858. | |
| config USB_SERIAL_QCAUX | |
| tristate "USB Qualcomm Auxiliary Serial Port Driver" | |
| help | |
| Say Y here if you want to use the auxiliary serial ports provided | |
| by many modems based on Qualcomm chipsets. These ports often use | |
| a proprietary protocol called DM and cannot be used for AT- or | |
| PPP-based communication. | |
| To compile this driver as a module, choose M here: the | |
| module will be called qcaux. If unsure, choose N. | |
| config USB_SERIAL_QUALCOMM | |
| tristate "USB Qualcomm Serial modem" | |
| select USB_SERIAL_WWAN | |
| help | |
| Say Y here if you have a Qualcomm USB modem device. These are | |
| usually wireless cellular modems. | |
| To compile this driver as a module, choose M here: the | |
| module will be called qcserial. | |
| config USB_SERIAL_SPCP8X5 | |
| tristate "USB SPCP8x5 USB To Serial Driver" | |
| help | |
| Say Y here if you want to use the spcp8x5 converter chip. This is | |
| commonly found in some Z-Wave USB devices. | |
| To compile this driver as a module, choose M here: the | |
| module will be called spcp8x5. | |
| config USB_SERIAL_HP4X | |
| tristate "USB HP4x Calculators support" | |
| help | |
| Say Y here if you want to use an Hewlett-Packard 4x Calculator. | |
| To compile this driver as a module, choose M here: the | |
| module will be called hp4x. | |
| config USB_SERIAL_SAFE | |
| tristate "USB Safe Serial (Encapsulated) Driver" | |
| config USB_SERIAL_SAFE_PADDED | |
| bool "USB Secure Encapsulated Driver - Padded" | |
| depends on USB_SERIAL_SAFE | |
| config USB_SERIAL_SIEMENS_MPI | |
| tristate "USB Siemens MPI driver" | |
| help | |
| Say M here if you want to use a Siemens USB/MPI adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called siemens_mpi. | |
| config USB_SERIAL_SIERRAWIRELESS | |
| tristate "USB Sierra Wireless Driver" | |
| help | |
| Say M here if you want to use Sierra Wireless devices. | |
| Many devices have a feature known as TRU-Install. For those devices | |
| to work properly, the USB Storage Sierra feature must be enabled. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sierra. | |
| config USB_SERIAL_SYMBOL | |
| tristate "USB Symbol Barcode driver (serial mode)" | |
| help | |
| Say Y here if you want to use a Symbol USB Barcode device | |
| in serial emulation mode. | |
| To compile this driver as a module, choose M here: the | |
| module will be called symbolserial. | |
| config USB_SERIAL_TI | |
| tristate "USB TI 3410/5052 Serial Driver" | |
| help | |
| Say Y here if you want to use the TI USB 3410 or 5052 | |
| serial devices. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ti_usb_3410_5052. | |
| config USB_SERIAL_CYBERJACK | |
| tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader" | |
| ---help--- | |
| Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard | |
| reader. This is an interface to ISO 7816 compatible contact-based | |
| chipcards, e.g. GSM SIMs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cyberjack. | |
| If unsure, say N. | |
| config USB_SERIAL_XIRCOM | |
| tristate "USB Xircom / Entregra Single Port Serial Driver" | |
| select USB_EZUSB_FX2 | |
| help | |
| Say Y here if you want to use a Xircom or Entregra single port USB to | |
| serial converter device. This driver makes use of firmware | |
| developed from scratch by Brian Warner. | |
| To compile this driver as a module, choose M here: the | |
| module will be called keyspan_pda. | |
| config USB_SERIAL_WWAN | |
| tristate | |
| config USB_SERIAL_OPTION | |
| tristate "USB driver for GSM and CDMA modems" | |
| select USB_SERIAL_WWAN | |
| help | |
| Say Y here if you have a GSM or CDMA modem that's connected to USB. | |
| This driver also supports several PCMCIA cards which have a | |
| built-in OHCI-USB adapter and an internally-connected GSM modem. | |
| The USB bus on these cards is not accessible externally. | |
| Supported devices include (some of?) those made by: | |
| Option, Huawei, Audiovox, Novatel Wireless, or Anydata. | |
| To compile this driver as a module, choose M here: the | |
| module will be called option. | |
| If this driver doesn't recognize your device, | |
| it might be accessible via the FTDI_SIO driver. | |
| config USB_SERIAL_OMNINET | |
| tristate "USB ZyXEL omni.net LCD Plus Driver" | |
| help | |
| Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA. | |
| To compile this driver as a module, choose M here: the | |
| module will be called omninet. | |
| config USB_SERIAL_OPTICON | |
| tristate "USB Opticon Barcode driver (serial mode)" | |
| help | |
| Say Y here if you want to use a Opticon USB Barcode device | |
| in serial emulation mode. | |
| To compile this driver as a module, choose M here: the | |
| module will be called opticon. | |
| config USB_SERIAL_VIVOPAY_SERIAL | |
| tristate "USB ViVOpay serial interface driver" | |
| help | |
| Say Y here if you want to use a ViVOtech ViVOpay USB device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called vivopay-serial. | |
| config USB_SERIAL_XSENS_MT | |
| tristate "Xsens motion tracker serial interface driver" | |
| help | |
| Say Y here if you want to use Xsens motion trackers. | |
| This driver supports the new generation of motion trackers | |
| by Xsens. Older devices can be accessed using the FTDI_SIO | |
| driver. | |
| To compile this driver as a module, choose M here: the | |
| module will be called xsens_mt. | |
| config USB_SERIAL_ZIO | |
| tristate "ZIO Motherboard USB serial interface driver" | |
| help | |
| Say Y here if you want to use ZIO Motherboard. | |
| To compile this driver as a module, choose M here: the | |
| module will be called zio. | |
| config USB_SERIAL_WISHBONE | |
| tristate "USB-Wishbone adapter interface driver" | |
| help | |
| Say Y here if you want to use a USB attached Wishbone bus. | |
| Wishbone is an open hardware SoC bus commonly used in FPGA | |
| designs. Bus access can be serialized using the Etherbone | |
| protocol <http://www.ohwr.org/projects/etherbone-core>. | |
| This driver is intended to be used with devices which attach | |
| their internal Wishbone bus to a USB serial interface using | |
| the Etherbone protocol. A userspace library is required to | |
| speak the protocol made available by this driver as ttyUSBx. | |
| To compile this driver as a module, choose M here: the | |
| module will be called wishbone-serial. | |
| config USB_SERIAL_ZTE | |
| tristate "ZTE USB serial driver" | |
| help | |
| Say Y here if you want to use a ZTE USB to serial device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called zte. | |
| config USB_SERIAL_SSU100 | |
| tristate "USB Quatech SSU-100 Single Port Serial Driver" | |
| help | |
| Say Y here if you want to use the Quatech SSU-100 single | |
| port usb to serial adapter. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ssu100. | |
| config USB_SERIAL_QT2 | |
| tristate "USB Quatech Serial Driver for USB 2 devices" | |
| help | |
| Say Y here if you want to use the Quatech USB 2 | |
| serial adapters. | |
| To compile this driver as a module, choose M here: the | |
| module will be called quatech-serial. | |
| config USB_SERIAL_DEBUG | |
| tristate "USB Debugging Device" | |
| help | |
| Say Y here if you have a USB debugging device used to receive | |
| debugging data from another machine. The most common of these | |
| devices is the NetChip TurboCONNECT device. | |
| To compile this driver as a module, choose M here: the | |
| module will be called usb-debug. | |
| endif # USB_SERIAL |