blob: 1637c298a1b337bf83612cb12129001ecd11da24 [file] [log] [blame]
Device tree configuration for i2c-ocores
Required properties:
- compatible : "opencores,i2c-ocores" or "aeroflexgaisler,i2cmst"
- reg : bus address start and address range size of device
- interrupts : interrupt number
- clock-frequency : frequency of bus clock in Hz
- #address-cells : should be <1>
- #size-cells : should be <0>
Optional properties:
- reg-shift : device register offsets are shifted by this value
- reg-io-width : io register width in bytes (1, 2 or 4)
- regstep : deprecated, use reg-shift above
Example:
i2c0: ocores@a0000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "opencores,i2c-ocores";
reg = <0xa0000000 0x8>;
interrupts = <10>;
clock-frequency = <20000000>;
reg-shift = <0>; /* 8 bit registers */
reg-io-width = <1>; /* 8 bit read/write */
dummy@60 {
compatible = "dummy";
reg = <0x60>;
};
};