| # | |
| # EDAC Kconfig | |
| # Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com | |
| # Licensed and distributed under the GPL | |
| # | |
| config EDAC_SUPPORT | |
| bool | |
| menuconfig EDAC | |
| bool "EDAC (Error Detection And Correction) reporting" | |
| depends on HAS_IOMEM | |
| depends on X86 || PPC || TILE || ARM || EDAC_SUPPORT | |
| help | |
| EDAC is designed to report errors in the core system. | |
| These are low-level errors that are reported in the CPU or | |
| supporting chipset or other subsystems: | |
| memory errors, cache errors, PCI errors, thermal throttling, etc.. | |
| If unsure, select 'Y'. | |
| If this code is reporting problems on your system, please | |
| see the EDAC project web pages for more information at: | |
| <http://bluesmoke.sourceforge.net/> | |
| and: | |
| <http://buttersideup.com/edacwiki> | |
| There is also a mailing list for the EDAC project, which can | |
| be found via the sourceforge page. | |
| if EDAC | |
| config EDAC_LEGACY_SYSFS | |
| bool "EDAC legacy sysfs" | |
| default y | |
| help | |
| Enable the compatibility sysfs nodes. | |
| Use 'Y' if your edac utilities aren't ported to work with the newer | |
| structures. | |
| config EDAC_DEBUG | |
| bool "Debugging" | |
| help | |
| This turns on debugging information for the entire EDAC subsystem. | |
| You do so by inserting edac_module with "edac_debug_level=x." Valid | |
| levels are 0-4 (from low to high) and by default it is set to 2. | |
| Usually you should select 'N' here. | |
| config EDAC_DECODE_MCE | |
| tristate "Decode MCEs in human-readable form (only on AMD for now)" | |
| depends on CPU_SUP_AMD && X86_MCE_AMD | |
| default y | |
| ---help--- | |
| Enable this option if you want to decode Machine Check Exceptions | |
| occurring on your machine in human-readable form. | |
| You should definitely say Y here in case you want to decode MCEs | |
| which occur really early upon boot, before the module infrastructure | |
| has been initialized. | |
| config EDAC_MCE_INJ | |
| tristate "Simple MCE injection interface over /sysfs" | |
| depends on EDAC_DECODE_MCE | |
| default n | |
| help | |
| This is a simple interface to inject MCEs over /sysfs and test | |
| the MCE decoding code in EDAC. | |
| This is currently AMD-only. | |
| config EDAC_MM_EDAC | |
| tristate "Main Memory EDAC (Error Detection And Correction) reporting" | |
| help | |
| Some systems are able to detect and correct errors in main | |
| memory. EDAC can report statistics on memory error | |
| detection and correction (EDAC - or commonly referred to ECC | |
| errors). EDAC will also try to decode where these errors | |
| occurred so that a particular failing memory module can be | |
| replaced. If unsure, select 'Y'. | |
| config EDAC_GHES | |
| bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" | |
| depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y) | |
| default y | |
| help | |
| Not all machines support hardware-driven error report. Some of those | |
| provide a BIOS-driven error report mechanism via ACPI, using the | |
| APEI/GHES driver. By enabling this option, the error reports provided | |
| by GHES are sent to userspace via the EDAC API. | |
| When this option is enabled, it will disable the hardware-driven | |
| mechanisms, if a GHES BIOS is detected, entering into the | |
| "Firmware First" mode. | |
| It should be noticed that keeping both GHES and a hardware-driven | |
| error mechanism won't work well, as BIOS will race with OS, while | |
| reading the error registers. So, if you want to not use "Firmware | |
| first" GHES error mechanism, you should disable GHES either at | |
| compilation time or by passing "ghes.disable=1" Kernel parameter | |
| at boot time. | |
| In doubt, say 'Y'. | |
| config EDAC_AMD64 | |
| tristate "AMD64 (Opteron, Athlon64) K8, F10h" | |
| depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE | |
| help | |
| Support for error detection and correction of DRAM ECC errors on | |
| the AMD64 families of memory controllers (K8 and F10h) | |
| config EDAC_AMD64_ERROR_INJECTION | |
| bool "Sysfs HW Error injection facilities" | |
| depends on EDAC_AMD64 | |
| help | |
| Recent Opterons (Family 10h and later) provide for Memory Error | |
| Injection into the ECC detection circuits. The amd64_edac module | |
| allows the operator/user to inject Uncorrectable and Correctable | |
| errors into DRAM. | |
| When enabled, in each of the respective memory controller directories | |
| (/sys/devices/system/edac/mc/mcX), there are 3 input files: | |
| - inject_section (0..3, 16-byte section of 64-byte cacheline), | |
| - inject_word (0..8, 16-bit word of 16-byte section), | |
| - inject_ecc_vector (hex ecc vector: select bits of inject word) | |
| In addition, there are two control files, inject_read and inject_write, | |
| which trigger the DRAM ECC Read and Write respectively. | |
| config EDAC_AMD76X | |
| tristate "AMD 76x (760, 762, 768)" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| help | |
| Support for error detection and correction on the AMD 76x | |
| series of chipsets used with the Athlon processor. | |
| config EDAC_E7XXX | |
| tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| help | |
| Support for error detection and correction on the Intel | |
| E7205, E7500, E7501 and E7505 server chipsets. | |
| config EDAC_E752X | |
| tristate "Intel e752x (e7520, e7525, e7320) and 3100" | |
| depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG | |
| help | |
| Support for error detection and correction on the Intel | |
| E7520, E7525, E7320 server chipsets. | |
| config EDAC_I82443BXGX | |
| tristate "Intel 82443BX/GX (440BX/GX)" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| depends on BROKEN | |
| help | |
| Support for error detection and correction on the Intel | |
| 82443BX/GX memory controllers (440BX/GX chipsets). | |
| config EDAC_I82875P | |
| tristate "Intel 82875p (D82875P, E7210)" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| help | |
| Support for error detection and correction on the Intel | |
| DP82785P and E7210 server chipsets. | |
| config EDAC_I82975X | |
| tristate "Intel 82975x (D82975x)" | |
| depends on EDAC_MM_EDAC && PCI && X86 | |
| help | |
| Support for error detection and correction on the Intel | |
| DP82975x server chipsets. | |
| config EDAC_I3000 | |
| tristate "Intel 3000/3010" | |
| depends on EDAC_MM_EDAC && PCI && X86 | |
| help | |
| Support for error detection and correction on the Intel | |
| 3000 and 3010 server chipsets. | |
| config EDAC_I3200 | |
| tristate "Intel 3200" | |
| depends on EDAC_MM_EDAC && PCI && X86 | |
| help | |
| Support for error detection and correction on the Intel | |
| 3200 and 3210 server chipsets. | |
| config EDAC_X38 | |
| tristate "Intel X38" | |
| depends on EDAC_MM_EDAC && PCI && X86 | |
| help | |
| Support for error detection and correction on the Intel | |
| X38 server chipsets. | |
| config EDAC_I5400 | |
| tristate "Intel 5400 (Seaburg) chipsets" | |
| depends on EDAC_MM_EDAC && PCI && X86 | |
| help | |
| Support for error detection and correction the Intel | |
| i5400 MCH chipset (Seaburg). | |
| config EDAC_I7CORE | |
| tristate "Intel i7 Core (Nehalem) processors" | |
| depends on EDAC_MM_EDAC && PCI && X86 && X86_MCE_INTEL | |
| help | |
| Support for error detection and correction the Intel | |
| i7 Core (Nehalem) Integrated Memory Controller that exists on | |
| newer processors like i7 Core, i7 Core Extreme, Xeon 35xx | |
| and Xeon 55xx processors. | |
| config EDAC_I82860 | |
| tristate "Intel 82860" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| help | |
| Support for error detection and correction on the Intel | |
| 82860 chipset. | |
| config EDAC_R82600 | |
| tristate "Radisys 82600 embedded chipset" | |
| depends on EDAC_MM_EDAC && PCI && X86_32 | |
| help | |
| Support for error detection and correction on the Radisys | |
| 82600 embedded chipset. | |
| config EDAC_I5000 | |
| tristate "Intel Greencreek/Blackford chipset" | |
| depends on EDAC_MM_EDAC && X86 && PCI | |
| help | |
| Support for error detection and correction the Intel | |
| Greekcreek/Blackford chipsets. | |
| config EDAC_I5100 | |
| tristate "Intel San Clemente MCH" | |
| depends on EDAC_MM_EDAC && X86 && PCI | |
| help | |
| Support for error detection and correction the Intel | |
| San Clemente MCH. | |
| config EDAC_I7300 | |
| tristate "Intel Clarksboro MCH" | |
| depends on EDAC_MM_EDAC && X86 && PCI | |
| help | |
| Support for error detection and correction the Intel | |
| Clarksboro MCH (Intel 7300 chipset). | |
| config EDAC_SBRIDGE | |
| tristate "Intel Sandy-Bridge Integrated MC" | |
| depends on EDAC_MM_EDAC && PCI && X86_64 && X86_MCE_INTEL | |
| depends on PCI_MMCONFIG | |
| help | |
| Support for error detection and correction the Intel | |
| Sandy Bridge Integrated Memory Controller. | |
| config EDAC_MPC85XX | |
| tristate "Freescale MPC83xx / MPC85xx" | |
| depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx) | |
| help | |
| Support for error detection and correction on the Freescale | |
| MPC8349, MPC8560, MPC8540, MPC8548 | |
| config EDAC_MV64X60 | |
| tristate "Marvell MV64x60" | |
| depends on EDAC_MM_EDAC && MV64X60 | |
| help | |
| Support for error detection and correction on the Marvell | |
| MV64360 and MV64460 chipsets. | |
| config EDAC_PASEMI | |
| tristate "PA Semi PWRficient" | |
| depends on EDAC_MM_EDAC && PCI | |
| depends on PPC_PASEMI | |
| help | |
| Support for error detection and correction on PA Semi | |
| PWRficient. | |
| config EDAC_CELL | |
| tristate "Cell Broadband Engine memory controller" | |
| depends on EDAC_MM_EDAC && PPC_CELL_COMMON | |
| help | |
| Support for error detection and correction on the | |
| Cell Broadband Engine internal memory controller | |
| on platform without a hypervisor | |
| config EDAC_PPC4XX | |
| tristate "PPC4xx IBM DDR2 Memory Controller" | |
| depends on EDAC_MM_EDAC && 4xx | |
| help | |
| This enables support for EDAC on the ECC memory used | |
| with the IBM DDR2 memory controller found in various | |
| PowerPC 4xx embedded processors such as the 405EX[r], | |
| 440SP, 440SPe, 460EX, 460GT and 460SX. | |
| config EDAC_AMD8131 | |
| tristate "AMD8131 HyperTransport PCI-X Tunnel" | |
| depends on EDAC_MM_EDAC && PCI && PPC_MAPLE | |
| help | |
| Support for error detection and correction on the | |
| AMD8131 HyperTransport PCI-X Tunnel chip. | |
| Note, add more Kconfig dependency if it's adopted | |
| on some machine other than Maple. | |
| config EDAC_AMD8111 | |
| tristate "AMD8111 HyperTransport I/O Hub" | |
| depends on EDAC_MM_EDAC && PCI && PPC_MAPLE | |
| help | |
| Support for error detection and correction on the | |
| AMD8111 HyperTransport I/O Hub chip. | |
| Note, add more Kconfig dependency if it's adopted | |
| on some machine other than Maple. | |
| config EDAC_CPC925 | |
| tristate "IBM CPC925 Memory Controller (PPC970FX)" | |
| depends on EDAC_MM_EDAC && PPC64 | |
| help | |
| Support for error detection and correction on the | |
| IBM CPC925 Bridge and Memory Controller, which is | |
| a companion chip to the PowerPC 970 family of | |
| processors. | |
| config EDAC_TILE | |
| tristate "Tilera Memory Controller" | |
| depends on EDAC_MM_EDAC && TILE | |
| default y | |
| help | |
| Support for error detection and correction on the | |
| Tilera memory controller. | |
| config EDAC_HIGHBANK_MC | |
| tristate "Highbank Memory Controller" | |
| depends on EDAC_MM_EDAC && ARCH_HIGHBANK | |
| help | |
| Support for error detection and correction on the | |
| Calxeda Highbank memory controller. | |
| config EDAC_HIGHBANK_L2 | |
| tristate "Highbank L2 Cache" | |
| depends on EDAC_MM_EDAC && ARCH_HIGHBANK | |
| help | |
| Support for error detection and correction on the | |
| Calxeda Highbank memory controller. | |
| config EDAC_OCTEON_PC | |
| tristate "Cavium Octeon Primary Caches" | |
| depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON | |
| help | |
| Support for error detection and correction on the primary caches of | |
| the cnMIPS cores of Cavium Octeon family SOCs. | |
| config EDAC_OCTEON_L2C | |
| tristate "Cavium Octeon Secondary Caches (L2C)" | |
| depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON | |
| help | |
| Support for error detection and correction on the | |
| Cavium Octeon family of SOCs. | |
| config EDAC_OCTEON_LMC | |
| tristate "Cavium Octeon DRAM Memory Controller (LMC)" | |
| depends on EDAC_MM_EDAC && CPU_CAVIUM_OCTEON | |
| help | |
| Support for error detection and correction on the | |
| Cavium Octeon family of SOCs. | |
| config EDAC_OCTEON_PCI | |
| tristate "Cavium Octeon PCI Controller" | |
| depends on EDAC_MM_EDAC && PCI && CPU_CAVIUM_OCTEON | |
| help | |
| Support for error detection and correction on the | |
| Cavium Octeon family of SOCs. | |
| endif # EDAC |