| # | |
| # Input misc drivers configuration | |
| # | |
| menuconfig INPUT_MISC | |
| bool "Miscellaneous devices" | |
| help | |
| Say Y here, and a list of miscellaneous input drivers will be displayed. | |
| Everything that didn't fit into the other categories is here. This option | |
| doesn't affect the kernel. | |
| If unsure, say Y. | |
| if INPUT_MISC | |
| config INPUT_88PM860X_ONKEY | |
| tristate "88PM860x ONKEY support" | |
| depends on MFD_88PM860X | |
| help | |
| Support the ONKEY of Marvell 88PM860x PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 88pm860x_onkey. | |
| config INPUT_88PM80X_ONKEY | |
| tristate "88PM80x ONKEY support" | |
| depends on MFD_88PM800 | |
| help | |
| Support the ONKEY of Marvell 88PM80x PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called 88pm80x_onkey. | |
| config INPUT_AB8500_PONKEY | |
| tristate "AB8500 Pon (PowerOn) Key" | |
| depends on AB8500_CORE | |
| help | |
| Say Y here to use the PowerOn Key for ST-Ericsson's AB8500 | |
| Mix-Sig PMIC. | |
| To compile this driver as a module, choose M here: the module | |
| will be called ab8500-ponkey. | |
| config INPUT_ADBS_A330 | |
| tristate "ADBS_A330 OFN" | |
| help | |
| Say Y here if you want to support an ADBS_A330 OFN. | |
| config INPUT_AD714X | |
| tristate "Analog Devices AD714x Capacitance Touch Sensor" | |
| help | |
| Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. | |
| You should select a bus connection too. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad714x. | |
| config INPUT_AD714X_I2C | |
| tristate "support I2C bus connection" | |
| depends on INPUT_AD714X && I2C | |
| default y | |
| help | |
| Say Y here if you have AD7142/AD7147 hooked to an I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad714x-i2c. | |
| config INPUT_AD714X_SPI | |
| tristate "support SPI bus connection" | |
| depends on INPUT_AD714X && SPI | |
| default y | |
| help | |
| Say Y here if you have AD7142/AD7147 hooked to a SPI bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad714x-spi. | |
| config INPUT_ARIZONA_HAPTICS | |
| tristate "Arizona haptics support" | |
| depends on MFD_ARIZONA && SND_SOC | |
| select INPUT_FF_MEMLESS | |
| help | |
| Say Y to enable support for the haptics module in Arizona CODECs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called arizona-haptics. | |
| config INPUT_BMA150 | |
| tristate "BMA150/SMB380 acceleration sensor support" | |
| depends on I2C | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you have Bosch Sensortec's BMA150 or SMB380 | |
| acceleration sensor hooked to an I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bma150. | |
| config INPUT_PCSPKR | |
| tristate "PC Speaker support" | |
| depends on PCSPKR_PLATFORM | |
| help | |
| Say Y here if you want the standard PC Speaker to be used for | |
| bells and whistles. | |
| If unsure, say Y. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pcspkr. | |
| config INPUT_PM8XXX_VIBRATOR | |
| tristate "Qualcomm PM8XXX vibrator support" | |
| depends on MFD_PM8XXX | |
| select INPUT_FF_MEMLESS | |
| help | |
| This option enables device driver support for the vibrator | |
| on Qualcomm PM8xxx chip. This driver supports ff-memless interface | |
| from input framework. | |
| To compile this driver as module, choose M here: the | |
| module will be called pm8xxx-vibrator. | |
| config INPUT_PMIC8XXX_PWRKEY | |
| tristate "PMIC8XXX power key support" | |
| depends on MFD_PM8XXX | |
| help | |
| Say Y here if you want support for the PMIC8XXX power key. | |
| If unsure, say N. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pmic8xxx-pwrkey. | |
| config INPUT_SPARCSPKR | |
| tristate "SPARC Speaker support" | |
| depends on PCI && SPARC64 | |
| help | |
| Say Y here if you want the standard Speaker on Sparc PCI systems | |
| to be used for bells and whistles. | |
| If unsure, say Y. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sparcspkr. | |
| config INPUT_M68K_BEEP | |
| tristate "M68k Beeper support" | |
| depends on M68K | |
| config INPUT_MAX8925_ONKEY | |
| tristate "MAX8925 ONKEY support" | |
| depends on MFD_MAX8925 | |
| help | |
| Support the ONKEY of MAX8925 PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called max8925_onkey. | |
| config INPUT_MAX8997_HAPTIC | |
| tristate "MAXIM MAX8997 haptic controller support" | |
| depends on HAVE_PWM && MFD_MAX8997 | |
| select INPUT_FF_MEMLESS | |
| help | |
| This option enables device driver support for the haptic controller | |
| on MAXIM MAX8997 chip. This driver supports ff-memless interface | |
| from input framework. | |
| To compile this driver as module, choose M here: the | |
| module will be called max8997-haptic. | |
| config INPUT_MC13783_PWRBUTTON | |
| tristate "MC13783 ON buttons" | |
| depends on MFD_MC13783 | |
| help | |
| Support the ON buttons of MC13783 PMIC as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called mc13783-pwrbutton. | |
| config INPUT_MMA8450 | |
| tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer" | |
| depends on I2C | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you want to support Freescale's MMA8450 Accelerometer | |
| through I2C interface. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mma8450. | |
| config INPUT_MPU3050 | |
| tristate "MPU3050 Triaxial gyroscope sensor" | |
| depends on I2C | |
| help | |
| Say Y here if you want to support InvenSense MPU3050 | |
| connected via an I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mpu3050. | |
| config INPUT_APANEL | |
| tristate "Fujitsu Lifebook Application Panel buttons" | |
| depends on X86 && I2C && LEDS_CLASS | |
| select INPUT_POLLDEV | |
| select CHECK_SIGNATURE | |
| help | |
| Say Y here for support of the Application Panel buttons, used on | |
| Fujitsu Lifebook. These are attached to the mainboard through | |
| an SMBus interface managed by the I2C Intel ICH (i801) driver, | |
| which you should also build for this kernel. | |
| To compile this driver as a module, choose M here: the module will | |
| be called apanel. | |
| config INPUT_GP2A | |
| tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" | |
| depends on I2C | |
| depends on GPIOLIB | |
| help | |
| Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip | |
| hooked to an I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called gp2ap002a00f. | |
| config INPUT_GPIO_TILT_POLLED | |
| tristate "Polled GPIO tilt switch" | |
| depends on GPIOLIB | |
| select INPUT_POLLDEV | |
| help | |
| This driver implements support for tilt switches connected | |
| to GPIO pins that are not capable of generating interrupts. | |
| The list of gpios to use and the mapping of their states | |
| to specific angles is done via platform data. | |
| To compile this driver as a module, choose M here: the | |
| module will be called gpio_tilt_polled. | |
| config INPUT_IXP4XX_BEEPER | |
| tristate "IXP4XX Beeper support" | |
| depends on ARCH_IXP4XX | |
| help | |
| If you say yes here, you can connect a beeper to the | |
| ixp4xx gpio pins. This is used by the LinkSys NSLU2. | |
| If unsure, say Y. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ixp4xx-beeper. | |
| config INPUT_COBALT_BTNS | |
| tristate "Cobalt button interface" | |
| depends on MIPS_COBALT | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you want to support MIPS Cobalt button interface. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cobalt_btns. | |
| config INPUT_WISTRON_BTNS | |
| tristate "x86 Wistron laptop button interface" | |
| depends on X86 && !X86_64 | |
| select INPUT_POLLDEV | |
| select INPUT_SPARSEKMAP | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| select CHECK_SIGNATURE | |
| help | |
| Say Y here for support of Wistron laptop button interfaces, used on | |
| laptops of various brands, including Acer and Fujitsu-Siemens. If | |
| available, mail and wifi LEDs will be controllable via /sys/class/leds. | |
| To compile this driver as a module, choose M here: the module will | |
| be called wistron_btns. | |
| config INPUT_ATLAS_BTNS | |
| tristate "x86 Atlas button interface" | |
| depends on X86 && ACPI | |
| help | |
| Say Y here for support of Atlas wallmount touchscreen buttons. | |
| The events will show up as scancodes F1 through F9 via evdev. | |
| To compile this driver as a module, choose M here: the module will | |
| be called atlas_btns. | |
| config INPUT_ATI_REMOTE2 | |
| tristate "ATI / Philips USB RF remote control" | |
| depends on USB_ARCH_HAS_HCD | |
| select USB | |
| help | |
| Say Y here if you want to use an ATI or Philips USB RF remote control. | |
| These are RF remotes with USB receivers. | |
| ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards | |
| and is also available as a separate product. | |
| This driver provides mouse pointer, left and right mouse buttons, | |
| and maps all the other remote buttons to keypress events. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ati_remote2. | |
| config INPUT_KEYSPAN_REMOTE | |
| tristate "Keyspan DMR USB remote control" | |
| depends on USB_ARCH_HAS_HCD | |
| select USB | |
| help | |
| Say Y here if you want to use a Keyspan DMR USB remote control. | |
| Currently only the UIA-11 type of receiver has been tested. The tag | |
| on the receiver that connects to the USB port should have a P/N that | |
| will tell you what type of DMR you have. The UIA-10 type is not | |
| supported at this time. This driver maps all buttons to keypress | |
| events. | |
| To compile this driver as a module, choose M here: the module will | |
| be called keyspan_remote. | |
| config INPUT_KXTJ9 | |
| tristate "Kionix KXTJ9 tri-axis digital accelerometer" | |
| depends on I2C | |
| help | |
| Say Y here to enable support for the Kionix KXTJ9 digital tri-axis | |
| accelerometer. | |
| To compile this driver as a module, choose M here: the module will | |
| be called kxtj9. | |
| config INPUT_KXTJ9_POLLED_MODE | |
| bool "Enable polling mode support" | |
| depends on INPUT_KXTJ9 | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you need accelerometer to work in polling mode. | |
| config INPUT_POWERMATE | |
| tristate "Griffin PowerMate and Contour Jog support" | |
| depends on USB_ARCH_HAS_HCD | |
| select USB | |
| help | |
| Say Y here if you want to use Griffin PowerMate or Contour Jog devices. | |
| These are aluminum dials which can measure clockwise and anticlockwise | |
| rotation. The dial also acts as a pushbutton. The base contains an LED | |
| which can be instructed to pulse or to switch to a particular intensity. | |
| You can download userspace tools from | |
| <http://sowerbutts.com/powermate/>. | |
| To compile this driver as a module, choose M here: the | |
| module will be called powermate. | |
| config INPUT_YEALINK | |
| tristate "Yealink usb-p1k voip phone" | |
| depends on USB_ARCH_HAS_HCD | |
| select USB | |
| help | |
| Say Y here if you want to enable keyboard and LCD functions of the | |
| Yealink usb-p1k usb phones. The audio part is enabled by the generic | |
| usb sound driver, so you might want to enable that as well. | |
| For information about how to use these additional functions, see | |
| <file:Documentation/input/yealink.txt>. | |
| To compile this driver as a module, choose M here: the module will be | |
| called yealink. | |
| config INPUT_CM109 | |
| tristate "C-Media CM109 USB I/O Controller" | |
| depends on USB_ARCH_HAS_HCD | |
| select USB | |
| help | |
| Say Y here if you want to enable keyboard and buzzer functions of the | |
| C-Media CM109 usb phones. The audio part is enabled by the generic | |
| usb sound driver, so you might want to enable that as well. | |
| To compile this driver as a module, choose M here: the module will be | |
| called cm109. | |
| config INPUT_RETU_PWRBUTTON | |
| tristate "Retu Power button Driver" | |
| depends on MFD_RETU | |
| help | |
| Say Y here if you want to enable power key reporting via the | |
| Retu chips found in Nokia Internet Tablets (770, N800, N810). | |
| To compile this driver as a module, choose M here. The module will | |
| be called retu-pwrbutton. | |
| config INPUT_TWL4030_PWRBUTTON | |
| tristate "TWL4030 Power button Driver" | |
| depends on TWL4030_CORE | |
| help | |
| Say Y here if you want to enable power key reporting via the | |
| TWL4030 family of chips. | |
| To compile this driver as a module, choose M here. The module will | |
| be called twl4030_pwrbutton. | |
| config INPUT_TWL4030_VIBRA | |
| tristate "Support for TWL4030 Vibrator" | |
| depends on TWL4030_CORE | |
| select MFD_TWL4030_AUDIO | |
| select INPUT_FF_MEMLESS | |
| help | |
| This option enables support for TWL4030 Vibrator Driver. | |
| To compile this driver as a module, choose M here. The module will | |
| be called twl4030_vibra. | |
| config INPUT_TWL6040_VIBRA | |
| tristate "Support for TWL6040 Vibrator" | |
| depends on TWL6040_CORE | |
| select INPUT_FF_MEMLESS | |
| help | |
| This option enables support for TWL6040 Vibrator Driver. | |
| To compile this driver as a module, choose M here. The module will | |
| be called twl6040_vibra. | |
| config INPUT_UINPUT | |
| tristate "User level driver support" | |
| help | |
| Say Y here if you want to support user level drivers for input | |
| subsystem accessible under char device 10:223 - /dev/input/uinput. | |
| To compile this driver as a module, choose M here: the | |
| module will be called uinput. | |
| config INPUT_SGI_BTNS | |
| tristate "SGI Indy/O2 volume button interface" | |
| depends on SGI_IP22 || SGI_IP32 | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you want to support SGI Indy/O2 volume button interface. | |
| To compile this driver as a module, choose M here: the | |
| module will be called sgi_btns. | |
| config HP_SDC_RTC | |
| tristate "HP SDC Real Time Clock" | |
| depends on (GSC || HP300) && SERIO | |
| select HP_SDC | |
| help | |
| Say Y here if you want to support the built-in real time clock | |
| of the HP SDC controller. | |
| config INPUT_PCF50633_PMU | |
| tristate "PCF50633 PMU events" | |
| depends on MFD_PCF50633 | |
| help | |
| Say Y to include support for delivering PMU events via input | |
| layer on NXP PCF50633. | |
| config INPUT_PCF8574 | |
| tristate "PCF8574 Keypad input device" | |
| depends on I2C | |
| help | |
| Say Y here if you want to support a keypad connected via I2C | |
| with a PCF8574. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pcf8574_keypad. | |
| config INPUT_PWM_BEEPER | |
| tristate "PWM beeper support" | |
| depends on HAVE_PWM || PWM | |
| help | |
| Say Y here to get support for PWM based beeper devices. | |
| If unsure, say N. | |
| To compile this driver as a module, choose M here: the module will be | |
| called pwm-beeper. | |
| config INPUT_GPIO_ROTARY_ENCODER | |
| tristate "Rotary encoders connected to GPIO pins" | |
| depends on GPIOLIB | |
| help | |
| Say Y here to add support for rotary encoders connected to GPIO lines. | |
| Check file:Documentation/input/rotary-encoder.txt for more | |
| information. | |
| To compile this driver as a module, choose M here: the | |
| module will be called rotary_encoder. | |
| config INPUT_RB532_BUTTON | |
| tristate "Mikrotik Routerboard 532 button interface" | |
| depends on MIKROTIK_RB532 | |
| depends on GPIOLIB | |
| select INPUT_POLLDEV | |
| help | |
| Say Y here if you want support for the S1 button built into | |
| Mikrotik's Routerboard 532. | |
| To compile this driver as a module, choose M here: the | |
| module will be called rb532_button. | |
| config INPUT_DA9052_ONKEY | |
| tristate "Dialog DA9052/DA9053 Onkey" | |
| depends on PMIC_DA9052 | |
| help | |
| Support the ONKEY of Dialog DA9052 PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the | |
| module will be called da9052_onkey. | |
| config INPUT_DA9055_ONKEY | |
| tristate "Dialog Semiconductor DA9055 ONKEY" | |
| depends on MFD_DA9055 | |
| help | |
| Support the ONKEY of DA9055 PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called da9055_onkey. | |
| config INPUT_DM355EVM | |
| tristate "TI DaVinci DM355 EVM Keypad and IR Remote" | |
| depends on MFD_DM355EVM_MSP | |
| select INPUT_SPARSEKMAP | |
| help | |
| Supports the pushbuttons and IR remote used with | |
| the DM355 EVM board. | |
| To compile this driver as a module, choose M here: the | |
| module will be called dm355evm_keys. | |
| config INPUT_BFIN_ROTARY | |
| tristate "Blackfin Rotary support" | |
| depends on BF54x || BF52x | |
| help | |
| Say Y here if you want to use the Blackfin Rotary. | |
| To compile this driver as a module, choose M here: the | |
| module will be called bfin-rotary. | |
| config INPUT_WM831X_ON | |
| tristate "WM831X ON pin" | |
| depends on MFD_WM831X | |
| help | |
| Support the ON pin of WM831X PMICs as an input device | |
| reporting power button status. | |
| To compile this driver as a module, choose M here: the module | |
| will be called wm831x_on. | |
| config INPUT_PCAP | |
| tristate "Motorola EZX PCAP misc input events" | |
| depends on EZX_PCAP | |
| help | |
| Say Y here if you want to use Power key and Headphone button | |
| on Motorola EZX phones. | |
| To compile this driver as a module, choose M here: the | |
| module will be called pcap_keys. | |
| config INPUT_ADXL34X | |
| tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer" | |
| default n | |
| help | |
| Say Y here if you have a Accelerometer interface using the | |
| ADXL345/6 controller, and your board-specific initialization | |
| code includes that in its table of devices. | |
| This driver can use either I2C or SPI communication to the | |
| ADXL345/6 controller. Select the appropriate method for | |
| your system. | |
| If unsure, say N (but it's safe to say "Y"). | |
| To compile this driver as a module, choose M here: the | |
| module will be called adxl34x. | |
| config INPUT_ADXL34X_I2C | |
| tristate "support I2C bus connection" | |
| depends on INPUT_ADXL34X && I2C | |
| default y | |
| help | |
| Say Y here if you have ADXL345/6 hooked to an I2C bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adxl34x-i2c. | |
| config INPUT_ADXL34X_SPI | |
| tristate "support SPI bus connection" | |
| depends on INPUT_ADXL34X && SPI | |
| default y | |
| help | |
| Say Y here if you have ADXL345/6 hooked to a SPI bus. | |
| To compile this driver as a module, choose M here: the | |
| module will be called adxl34x-spi. | |
| config INPUT_IMS_PCU | |
| tristate "IMS Passenger Control Unit driver" | |
| depends on USB | |
| depends on LEDS_CLASS | |
| help | |
| Say Y here if you have system with IMS Rave Passenger Control Unit. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ims_pcu. | |
| config INPUT_CMA3000 | |
| tristate "VTI CMA3000 Tri-axis accelerometer" | |
| help | |
| Say Y here if you want to use VTI CMA3000_D0x Accelerometer | |
| driver | |
| This driver currently only supports I2C interface to the | |
| controller. Also select the I2C method. | |
| If unsure, say N | |
| To compile this driver as a module, choose M here: the | |
| module will be called cma3000_d0x. | |
| config INPUT_CMA3000_I2C | |
| tristate "Support I2C bus connection" | |
| depends on INPUT_CMA3000 && I2C | |
| help | |
| Say Y here if you want to use VTI CMA3000_D0x Accelerometer | |
| through I2C interface. | |
| To compile this driver as a module, choose M here: the | |
| module will be called cma3000_d0x_i2c. | |
| config INPUT_XEN_KBDDEV_FRONTEND | |
| tristate "Xen virtual keyboard and mouse support" | |
| depends on XEN | |
| default y | |
| select XEN_XENBUS_FRONTEND | |
| help | |
| This driver implements the front-end of the Xen virtual | |
| keyboard and mouse device driver. It communicates with a back-end | |
| in another domain. | |
| To compile this driver as a module, choose M here: the | |
| module will be called xen-kbdfront. | |
| config INPUT_ISL29023 | |
| tristate "Intersil ISL29023 ambient light sensor" | |
| depends on I2C && SYSFS | |
| help | |
| If you say yes here you get support for the Intersil ISL29023 | |
| ambient light sensor. | |
| This driver can also be built as a module. If so, the module | |
| will be called isl29023. | |
| config INPUT_MAGWHEEL | |
| tristate "Nest Magwheel support" | |
| help | |
| The Magwheel driver reads from two channels of an ADC to | |
| tell the amount and direction the scroll wheel/ring has moved. | |
| Say Y here if you want the Nest Magwheel driver | |
| N if not, and M if you want it as a module. | |
| endif |