| /* Include in trace.c */ | |
| #include <linux/stringify.h> | |
| #include <linux/kthread.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| static inline int trace_valid_entry(struct trace_entry *entry) | |
| { | |
| switch (entry->type) { | |
| case TRACE_FN: | |
| case TRACE_CTX: | |
| case TRACE_WAKE: | |
| case TRACE_STACK: | |
| case TRACE_PRINT: | |
| case TRACE_BRANCH: | |
| case TRACE_GRAPH_ENT: | |
| case TRACE_GRAPH_RET: | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int trace_test_buffer_cpu(struct trace_buffer *buf, int cpu) | |
| { | |
| struct ring_buffer_event *event; | |
| struct trace_entry *entry; | |
| unsigned int loops = 0; | |
| while ((event = ring_buffer_consume(buf->buffer, cpu, NULL, NULL))) { | |
| entry = ring_buffer_event_data(event); | |
| /* | |
| * The ring buffer is a size of trace_buf_size, if | |
| * we loop more than the size, there's something wrong | |
| * with the ring buffer. | |
| */ | |
| if (loops++ > trace_buf_size) { | |
| printk(KERN_CONT ".. bad ring buffer "); | |
| goto failed; | |
| } | |
| if (!trace_valid_entry(entry)) { | |
| printk(KERN_CONT ".. invalid entry %d ", | |
| entry->type); | |
| goto failed; | |
| } | |
| } | |
| return 0; | |
| failed: | |
| /* disable tracing */ | |
| tracing_disabled = 1; | |
| printk(KERN_CONT ".. corrupted trace buffer .. "); | |
| return -1; | |
| } | |
| /* | |
| * Test the trace buffer to see if all the elements | |
| * are still sane. | |
| */ | |
| static int trace_test_buffer(struct trace_buffer *buf, unsigned long *count) | |
| { | |
| unsigned long flags, cnt = 0; | |
| int cpu, ret = 0; | |
| /* Don't allow flipping of max traces now */ | |
| local_irq_save(flags); | |
| arch_spin_lock(&ftrace_max_lock); | |
| cnt = ring_buffer_entries(buf->buffer); | |
| /* | |
| * The trace_test_buffer_cpu runs a while loop to consume all data. | |
| * If the calling tracer is broken, and is constantly filling | |
| * the buffer, this will run forever, and hard lock the box. | |
| * We disable the ring buffer while we do this test to prevent | |
| * a hard lock up. | |
| */ | |
| tracing_off(); | |
| for_each_possible_cpu(cpu) { | |
| ret = trace_test_buffer_cpu(buf, cpu); | |
| if (ret) | |
| break; | |
| } | |
| tracing_on(); | |
| arch_spin_unlock(&ftrace_max_lock); | |
| local_irq_restore(flags); | |
| if (count) | |
| *count = cnt; | |
| return ret; | |
| } | |
| static inline void warn_failed_init_tracer(struct tracer *trace, int init_ret) | |
| { | |
| printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n", | |
| trace->name, init_ret); | |
| } | |
| #ifdef CONFIG_FUNCTION_TRACER | |
| #ifdef CONFIG_DYNAMIC_FTRACE | |
| static int trace_selftest_test_probe1_cnt; | |
| static void trace_selftest_test_probe1_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| trace_selftest_test_probe1_cnt++; | |
| } | |
| static int trace_selftest_test_probe2_cnt; | |
| static void trace_selftest_test_probe2_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| trace_selftest_test_probe2_cnt++; | |
| } | |
| static int trace_selftest_test_probe3_cnt; | |
| static void trace_selftest_test_probe3_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| trace_selftest_test_probe3_cnt++; | |
| } | |
| static int trace_selftest_test_global_cnt; | |
| static void trace_selftest_test_global_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| trace_selftest_test_global_cnt++; | |
| } | |
| static int trace_selftest_test_dyn_cnt; | |
| static void trace_selftest_test_dyn_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| trace_selftest_test_dyn_cnt++; | |
| } | |
| static struct ftrace_ops test_probe1 = { | |
| .func = trace_selftest_test_probe1_func, | |
| .flags = FTRACE_OPS_FL_RECURSION_SAFE, | |
| }; | |
| static struct ftrace_ops test_probe2 = { | |
| .func = trace_selftest_test_probe2_func, | |
| .flags = FTRACE_OPS_FL_RECURSION_SAFE, | |
| }; | |
| static struct ftrace_ops test_probe3 = { | |
| .func = trace_selftest_test_probe3_func, | |
| .flags = FTRACE_OPS_FL_RECURSION_SAFE, | |
| }; | |
| static struct ftrace_ops test_global = { | |
| .func = trace_selftest_test_global_func, | |
| .flags = FTRACE_OPS_FL_GLOBAL | FTRACE_OPS_FL_RECURSION_SAFE, | |
| }; | |
| static void print_counts(void) | |
| { | |
| printk("(%d %d %d %d %d) ", | |
| trace_selftest_test_probe1_cnt, | |
| trace_selftest_test_probe2_cnt, | |
| trace_selftest_test_probe3_cnt, | |
| trace_selftest_test_global_cnt, | |
| trace_selftest_test_dyn_cnt); | |
| } | |
| static void reset_counts(void) | |
| { | |
| trace_selftest_test_probe1_cnt = 0; | |
| trace_selftest_test_probe2_cnt = 0; | |
| trace_selftest_test_probe3_cnt = 0; | |
| trace_selftest_test_global_cnt = 0; | |
| trace_selftest_test_dyn_cnt = 0; | |
| } | |
| static int trace_selftest_ops(int cnt) | |
| { | |
| int save_ftrace_enabled = ftrace_enabled; | |
| struct ftrace_ops *dyn_ops; | |
| char *func1_name; | |
| char *func2_name; | |
| int len1; | |
| int len2; | |
| int ret = -1; | |
| printk(KERN_CONT "PASSED\n"); | |
| pr_info("Testing dynamic ftrace ops #%d: ", cnt); | |
| ftrace_enabled = 1; | |
| reset_counts(); | |
| /* Handle PPC64 '.' name */ | |
| func1_name = "*" __stringify(DYN_FTRACE_TEST_NAME); | |
| func2_name = "*" __stringify(DYN_FTRACE_TEST_NAME2); | |
| len1 = strlen(func1_name); | |
| len2 = strlen(func2_name); | |
| /* | |
| * Probe 1 will trace function 1. | |
| * Probe 2 will trace function 2. | |
| * Probe 3 will trace functions 1 and 2. | |
| */ | |
| ftrace_set_filter(&test_probe1, func1_name, len1, 1); | |
| ftrace_set_filter(&test_probe2, func2_name, len2, 1); | |
| ftrace_set_filter(&test_probe3, func1_name, len1, 1); | |
| ftrace_set_filter(&test_probe3, func2_name, len2, 0); | |
| register_ftrace_function(&test_probe1); | |
| register_ftrace_function(&test_probe2); | |
| register_ftrace_function(&test_probe3); | |
| register_ftrace_function(&test_global); | |
| DYN_FTRACE_TEST_NAME(); | |
| print_counts(); | |
| if (trace_selftest_test_probe1_cnt != 1) | |
| goto out; | |
| if (trace_selftest_test_probe2_cnt != 0) | |
| goto out; | |
| if (trace_selftest_test_probe3_cnt != 1) | |
| goto out; | |
| if (trace_selftest_test_global_cnt == 0) | |
| goto out; | |
| DYN_FTRACE_TEST_NAME2(); | |
| print_counts(); | |
| if (trace_selftest_test_probe1_cnt != 1) | |
| goto out; | |
| if (trace_selftest_test_probe2_cnt != 1) | |
| goto out; | |
| if (trace_selftest_test_probe3_cnt != 2) | |
| goto out; | |
| /* Add a dynamic probe */ | |
| dyn_ops = kzalloc(sizeof(*dyn_ops), GFP_KERNEL); | |
| if (!dyn_ops) { | |
| printk("MEMORY ERROR "); | |
| goto out; | |
| } | |
| dyn_ops->func = trace_selftest_test_dyn_func; | |
| register_ftrace_function(dyn_ops); | |
| trace_selftest_test_global_cnt = 0; | |
| DYN_FTRACE_TEST_NAME(); | |
| print_counts(); | |
| if (trace_selftest_test_probe1_cnt != 2) | |
| goto out_free; | |
| if (trace_selftest_test_probe2_cnt != 1) | |
| goto out_free; | |
| if (trace_selftest_test_probe3_cnt != 3) | |
| goto out_free; | |
| if (trace_selftest_test_global_cnt == 0) | |
| goto out; | |
| if (trace_selftest_test_dyn_cnt == 0) | |
| goto out_free; | |
| DYN_FTRACE_TEST_NAME2(); | |
| print_counts(); | |
| if (trace_selftest_test_probe1_cnt != 2) | |
| goto out_free; | |
| if (trace_selftest_test_probe2_cnt != 2) | |
| goto out_free; | |
| if (trace_selftest_test_probe3_cnt != 4) | |
| goto out_free; | |
| ret = 0; | |
| out_free: | |
| unregister_ftrace_function(dyn_ops); | |
| kfree(dyn_ops); | |
| out: | |
| /* Purposely unregister in the same order */ | |
| unregister_ftrace_function(&test_probe1); | |
| unregister_ftrace_function(&test_probe2); | |
| unregister_ftrace_function(&test_probe3); | |
| unregister_ftrace_function(&test_global); | |
| /* Make sure everything is off */ | |
| reset_counts(); | |
| DYN_FTRACE_TEST_NAME(); | |
| DYN_FTRACE_TEST_NAME(); | |
| if (trace_selftest_test_probe1_cnt || | |
| trace_selftest_test_probe2_cnt || | |
| trace_selftest_test_probe3_cnt || | |
| trace_selftest_test_global_cnt || | |
| trace_selftest_test_dyn_cnt) | |
| ret = -1; | |
| ftrace_enabled = save_ftrace_enabled; | |
| return ret; | |
| } | |
| /* Test dynamic code modification and ftrace filters */ | |
| int trace_selftest_startup_dynamic_tracing(struct tracer *trace, | |
| struct trace_array *tr, | |
| int (*func)(void)) | |
| { | |
| int save_ftrace_enabled = ftrace_enabled; | |
| unsigned long count; | |
| char *func_name; | |
| int ret; | |
| /* The ftrace test PASSED */ | |
| printk(KERN_CONT "PASSED\n"); | |
| pr_info("Testing dynamic ftrace: "); | |
| /* enable tracing, and record the filter function */ | |
| ftrace_enabled = 1; | |
| /* passed in by parameter to fool gcc from optimizing */ | |
| func(); | |
| /* | |
| * Some archs *cough*PowerPC*cough* add characters to the | |
| * start of the function names. We simply put a '*' to | |
| * accommodate them. | |
| */ | |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); | |
| /* filter only on our function */ | |
| ftrace_set_global_filter(func_name, strlen(func_name), 1); | |
| /* enable tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| goto out; | |
| } | |
| /* Sleep for a 1/10 of a second */ | |
| msleep(100); | |
| /* we should have nothing in the buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| if (ret) | |
| goto out; | |
| if (count) { | |
| ret = -1; | |
| printk(KERN_CONT ".. filter did not filter .. "); | |
| goto out; | |
| } | |
| /* call our function again */ | |
| func(); | |
| /* sleep again */ | |
| msleep(100); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| ftrace_enabled = 0; | |
| /* check the trace buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| tracing_start(); | |
| /* we should only have one item */ | |
| if (!ret && count != 1) { | |
| trace->reset(tr); | |
| printk(KERN_CONT ".. filter failed count=%ld ..", count); | |
| ret = -1; | |
| goto out; | |
| } | |
| /* Test the ops with global tracing running */ | |
| ret = trace_selftest_ops(1); | |
| trace->reset(tr); | |
| out: | |
| ftrace_enabled = save_ftrace_enabled; | |
| /* Enable tracing on all functions again */ | |
| ftrace_set_global_filter(NULL, 0, 1); | |
| /* Test the ops with global tracing off */ | |
| if (!ret) | |
| ret = trace_selftest_ops(2); | |
| return ret; | |
| } | |
| static int trace_selftest_recursion_cnt; | |
| static void trace_selftest_test_recursion_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| /* | |
| * This function is registered without the recursion safe flag. | |
| * The ftrace infrastructure should provide the recursion | |
| * protection. If not, this will crash the kernel! | |
| */ | |
| if (trace_selftest_recursion_cnt++ > 10) | |
| return; | |
| DYN_FTRACE_TEST_NAME(); | |
| } | |
| static void trace_selftest_test_recursion_safe_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| /* | |
| * We said we would provide our own recursion. By calling | |
| * this function again, we should recurse back into this function | |
| * and count again. But this only happens if the arch supports | |
| * all of ftrace features and nothing else is using the function | |
| * tracing utility. | |
| */ | |
| if (trace_selftest_recursion_cnt++) | |
| return; | |
| DYN_FTRACE_TEST_NAME(); | |
| } | |
| static struct ftrace_ops test_rec_probe = { | |
| .func = trace_selftest_test_recursion_func, | |
| }; | |
| static struct ftrace_ops test_recsafe_probe = { | |
| .func = trace_selftest_test_recursion_safe_func, | |
| .flags = FTRACE_OPS_FL_RECURSION_SAFE, | |
| }; | |
| static int | |
| trace_selftest_function_recursion(void) | |
| { | |
| int save_ftrace_enabled = ftrace_enabled; | |
| char *func_name; | |
| int len; | |
| int ret; | |
| /* The previous test PASSED */ | |
| pr_cont("PASSED\n"); | |
| pr_info("Testing ftrace recursion: "); | |
| /* enable tracing, and record the filter function */ | |
| ftrace_enabled = 1; | |
| /* Handle PPC64 '.' name */ | |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); | |
| len = strlen(func_name); | |
| ret = ftrace_set_filter(&test_rec_probe, func_name, len, 1); | |
| if (ret) { | |
| pr_cont("*Could not set filter* "); | |
| goto out; | |
| } | |
| ret = register_ftrace_function(&test_rec_probe); | |
| if (ret) { | |
| pr_cont("*could not register callback* "); | |
| goto out; | |
| } | |
| DYN_FTRACE_TEST_NAME(); | |
| unregister_ftrace_function(&test_rec_probe); | |
| ret = -1; | |
| if (trace_selftest_recursion_cnt != 1) { | |
| pr_cont("*callback not called once (%d)* ", | |
| trace_selftest_recursion_cnt); | |
| goto out; | |
| } | |
| trace_selftest_recursion_cnt = 1; | |
| pr_cont("PASSED\n"); | |
| pr_info("Testing ftrace recursion safe: "); | |
| ret = ftrace_set_filter(&test_recsafe_probe, func_name, len, 1); | |
| if (ret) { | |
| pr_cont("*Could not set filter* "); | |
| goto out; | |
| } | |
| ret = register_ftrace_function(&test_recsafe_probe); | |
| if (ret) { | |
| pr_cont("*could not register callback* "); | |
| goto out; | |
| } | |
| DYN_FTRACE_TEST_NAME(); | |
| unregister_ftrace_function(&test_recsafe_probe); | |
| ret = -1; | |
| if (trace_selftest_recursion_cnt != 2) { | |
| pr_cont("*callback not called expected 2 times (%d)* ", | |
| trace_selftest_recursion_cnt); | |
| goto out; | |
| } | |
| ret = 0; | |
| out: | |
| ftrace_enabled = save_ftrace_enabled; | |
| return ret; | |
| } | |
| #else | |
| # define trace_selftest_startup_dynamic_tracing(trace, tr, func) ({ 0; }) | |
| # define trace_selftest_function_recursion() ({ 0; }) | |
| #endif /* CONFIG_DYNAMIC_FTRACE */ | |
| static enum { | |
| TRACE_SELFTEST_REGS_START, | |
| TRACE_SELFTEST_REGS_FOUND, | |
| TRACE_SELFTEST_REGS_NOT_FOUND, | |
| } trace_selftest_regs_stat; | |
| static void trace_selftest_test_regs_func(unsigned long ip, | |
| unsigned long pip, | |
| struct ftrace_ops *op, | |
| struct pt_regs *pt_regs) | |
| { | |
| if (pt_regs) | |
| trace_selftest_regs_stat = TRACE_SELFTEST_REGS_FOUND; | |
| else | |
| trace_selftest_regs_stat = TRACE_SELFTEST_REGS_NOT_FOUND; | |
| } | |
| static struct ftrace_ops test_regs_probe = { | |
| .func = trace_selftest_test_regs_func, | |
| .flags = FTRACE_OPS_FL_RECURSION_SAFE | FTRACE_OPS_FL_SAVE_REGS, | |
| }; | |
| static int | |
| trace_selftest_function_regs(void) | |
| { | |
| int save_ftrace_enabled = ftrace_enabled; | |
| char *func_name; | |
| int len; | |
| int ret; | |
| int supported = 0; | |
| #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS | |
| supported = 1; | |
| #endif | |
| /* The previous test PASSED */ | |
| pr_cont("PASSED\n"); | |
| pr_info("Testing ftrace regs%s: ", | |
| !supported ? "(no arch support)" : ""); | |
| /* enable tracing, and record the filter function */ | |
| ftrace_enabled = 1; | |
| /* Handle PPC64 '.' name */ | |
| func_name = "*" __stringify(DYN_FTRACE_TEST_NAME); | |
| len = strlen(func_name); | |
| ret = ftrace_set_filter(&test_regs_probe, func_name, len, 1); | |
| /* | |
| * If DYNAMIC_FTRACE is not set, then we just trace all functions. | |
| * This test really doesn't care. | |
| */ | |
| if (ret && ret != -ENODEV) { | |
| pr_cont("*Could not set filter* "); | |
| goto out; | |
| } | |
| ret = register_ftrace_function(&test_regs_probe); | |
| /* | |
| * Now if the arch does not support passing regs, then this should | |
| * have failed. | |
| */ | |
| if (!supported) { | |
| if (!ret) { | |
| pr_cont("*registered save-regs without arch support* "); | |
| goto out; | |
| } | |
| test_regs_probe.flags |= FTRACE_OPS_FL_SAVE_REGS_IF_SUPPORTED; | |
| ret = register_ftrace_function(&test_regs_probe); | |
| } | |
| if (ret) { | |
| pr_cont("*could not register callback* "); | |
| goto out; | |
| } | |
| DYN_FTRACE_TEST_NAME(); | |
| unregister_ftrace_function(&test_regs_probe); | |
| ret = -1; | |
| switch (trace_selftest_regs_stat) { | |
| case TRACE_SELFTEST_REGS_START: | |
| pr_cont("*callback never called* "); | |
| goto out; | |
| case TRACE_SELFTEST_REGS_FOUND: | |
| if (supported) | |
| break; | |
| pr_cont("*callback received regs without arch support* "); | |
| goto out; | |
| case TRACE_SELFTEST_REGS_NOT_FOUND: | |
| if (!supported) | |
| break; | |
| pr_cont("*callback received NULL regs* "); | |
| goto out; | |
| } | |
| ret = 0; | |
| out: | |
| ftrace_enabled = save_ftrace_enabled; | |
| return ret; | |
| } | |
| /* | |
| * Simple verification test of ftrace function tracer. | |
| * Enable ftrace, sleep 1/10 second, and then read the trace | |
| * buffer to see if all is in order. | |
| */ | |
| int | |
| trace_selftest_startup_function(struct tracer *trace, struct trace_array *tr) | |
| { | |
| int save_ftrace_enabled = ftrace_enabled; | |
| unsigned long count; | |
| int ret; | |
| /* make sure msleep has been recorded */ | |
| msleep(1); | |
| /* start the tracing */ | |
| ftrace_enabled = 1; | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| goto out; | |
| } | |
| /* Sleep for a 1/10 of a second */ | |
| msleep(100); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| ftrace_enabled = 0; | |
| /* check the trace buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| goto out; | |
| } | |
| ret = trace_selftest_startup_dynamic_tracing(trace, tr, | |
| DYN_FTRACE_TEST_NAME); | |
| if (ret) | |
| goto out; | |
| ret = trace_selftest_function_recursion(); | |
| if (ret) | |
| goto out; | |
| ret = trace_selftest_function_regs(); | |
| out: | |
| ftrace_enabled = save_ftrace_enabled; | |
| /* kill ftrace totally if we failed */ | |
| if (ret) | |
| ftrace_kill(); | |
| return ret; | |
| } | |
| #endif /* CONFIG_FUNCTION_TRACER */ | |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER | |
| /* Maximum number of functions to trace before diagnosing a hang */ | |
| #define GRAPH_MAX_FUNC_TEST 100000000 | |
| static unsigned int graph_hang_thresh; | |
| /* Wrap the real function entry probe to avoid possible hanging */ | |
| static int trace_graph_entry_watchdog(struct ftrace_graph_ent *trace) | |
| { | |
| /* This is harmlessly racy, we want to approximately detect a hang */ | |
| if (unlikely(++graph_hang_thresh > GRAPH_MAX_FUNC_TEST)) { | |
| ftrace_graph_stop(); | |
| printk(KERN_WARNING "BUG: Function graph tracer hang!\n"); | |
| if (ftrace_dump_on_oops) { | |
| ftrace_dump(DUMP_ALL); | |
| /* ftrace_dump() disables tracing */ | |
| tracing_on(); | |
| } | |
| return 0; | |
| } | |
| return trace_graph_entry(trace); | |
| } | |
| /* | |
| * Pretty much the same than for the function tracer from which the selftest | |
| * has been borrowed. | |
| */ | |
| int | |
| trace_selftest_startup_function_graph(struct tracer *trace, | |
| struct trace_array *tr) | |
| { | |
| int ret; | |
| unsigned long count; | |
| /* | |
| * Simulate the init() callback but we attach a watchdog callback | |
| * to detect and recover from possible hangs | |
| */ | |
| tracing_reset_online_cpus(&tr->trace_buffer); | |
| set_graph_array(tr); | |
| ret = register_ftrace_graph(&trace_graph_return, | |
| &trace_graph_entry_watchdog); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| goto out; | |
| } | |
| tracing_start_cmdline_record(); | |
| /* Sleep for a 1/10 of a second */ | |
| msleep(100); | |
| /* Have we just recovered from a hang? */ | |
| if (graph_hang_thresh > GRAPH_MAX_FUNC_TEST) { | |
| tracing_selftest_disabled = true; | |
| ret = -1; | |
| goto out; | |
| } | |
| tracing_stop(); | |
| /* check the trace buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| goto out; | |
| } | |
| /* Don't test dynamic tracing, the function tracer already did */ | |
| out: | |
| /* Stop it if we failed */ | |
| if (ret) | |
| ftrace_graph_stop(); | |
| return ret; | |
| } | |
| #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ | |
| #ifdef CONFIG_IRQSOFF_TRACER | |
| int | |
| trace_selftest_startup_irqsoff(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long save_max = tracing_max_latency; | |
| unsigned long count; | |
| int ret; | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| return ret; | |
| } | |
| /* reset the max latency */ | |
| tracing_max_latency = 0; | |
| /* disable interrupts for a bit */ | |
| local_irq_disable(); | |
| udelay(100); | |
| local_irq_enable(); | |
| /* | |
| * Stop the tracer to avoid a warning subsequent | |
| * to buffer flipping failure because tracing_stop() | |
| * disables the tr and max buffers, making flipping impossible | |
| * in case of parallels max irqs off latencies. | |
| */ | |
| trace->stop(tr); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check both trace buffers */ | |
| ret = trace_test_buffer(&tr->trace_buffer, NULL); | |
| if (!ret) | |
| ret = trace_test_buffer(&tr->max_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| } | |
| tracing_max_latency = save_max; | |
| return ret; | |
| } | |
| #endif /* CONFIG_IRQSOFF_TRACER */ | |
| #ifdef CONFIG_PREEMPT_TRACER | |
| int | |
| trace_selftest_startup_preemptoff(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long save_max = tracing_max_latency; | |
| unsigned long count; | |
| int ret; | |
| /* | |
| * Now that the big kernel lock is no longer preemptable, | |
| * and this is called with the BKL held, it will always | |
| * fail. If preemption is already disabled, simply | |
| * pass the test. When the BKL is removed, or becomes | |
| * preemptible again, we will once again test this, | |
| * so keep it in. | |
| */ | |
| if (preempt_count()) { | |
| printk(KERN_CONT "can not test ... force "); | |
| return 0; | |
| } | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| return ret; | |
| } | |
| /* reset the max latency */ | |
| tracing_max_latency = 0; | |
| /* disable preemption for a bit */ | |
| preempt_disable(); | |
| udelay(100); | |
| preempt_enable(); | |
| /* | |
| * Stop the tracer to avoid a warning subsequent | |
| * to buffer flipping failure because tracing_stop() | |
| * disables the tr and max buffers, making flipping impossible | |
| * in case of parallels max preempt off latencies. | |
| */ | |
| trace->stop(tr); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check both trace buffers */ | |
| ret = trace_test_buffer(&tr->trace_buffer, NULL); | |
| if (!ret) | |
| ret = trace_test_buffer(&tr->max_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| } | |
| tracing_max_latency = save_max; | |
| return ret; | |
| } | |
| #endif /* CONFIG_PREEMPT_TRACER */ | |
| #if defined(CONFIG_IRQSOFF_TRACER) && defined(CONFIG_PREEMPT_TRACER) | |
| int | |
| trace_selftest_startup_preemptirqsoff(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long save_max = tracing_max_latency; | |
| unsigned long count; | |
| int ret; | |
| /* | |
| * Now that the big kernel lock is no longer preemptable, | |
| * and this is called with the BKL held, it will always | |
| * fail. If preemption is already disabled, simply | |
| * pass the test. When the BKL is removed, or becomes | |
| * preemptible again, we will once again test this, | |
| * so keep it in. | |
| */ | |
| if (preempt_count()) { | |
| printk(KERN_CONT "can not test ... force "); | |
| return 0; | |
| } | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| goto out_no_start; | |
| } | |
| /* reset the max latency */ | |
| tracing_max_latency = 0; | |
| /* disable preemption and interrupts for a bit */ | |
| preempt_disable(); | |
| local_irq_disable(); | |
| udelay(100); | |
| preempt_enable(); | |
| /* reverse the order of preempt vs irqs */ | |
| local_irq_enable(); | |
| /* | |
| * Stop the tracer to avoid a warning subsequent | |
| * to buffer flipping failure because tracing_stop() | |
| * disables the tr and max buffers, making flipping impossible | |
| * in case of parallels max irqs/preempt off latencies. | |
| */ | |
| trace->stop(tr); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check both trace buffers */ | |
| ret = trace_test_buffer(&tr->trace_buffer, NULL); | |
| if (ret) | |
| goto out; | |
| ret = trace_test_buffer(&tr->max_buffer, &count); | |
| if (ret) | |
| goto out; | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| goto out; | |
| } | |
| /* do the test by disabling interrupts first this time */ | |
| tracing_max_latency = 0; | |
| tracing_start(); | |
| trace->start(tr); | |
| preempt_disable(); | |
| local_irq_disable(); | |
| udelay(100); | |
| preempt_enable(); | |
| /* reverse the order of preempt vs irqs */ | |
| local_irq_enable(); | |
| trace->stop(tr); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check both trace buffers */ | |
| ret = trace_test_buffer(&tr->trace_buffer, NULL); | |
| if (ret) | |
| goto out; | |
| ret = trace_test_buffer(&tr->max_buffer, &count); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| goto out; | |
| } | |
| out: | |
| tracing_start(); | |
| out_no_start: | |
| trace->reset(tr); | |
| tracing_max_latency = save_max; | |
| return ret; | |
| } | |
| #endif /* CONFIG_IRQSOFF_TRACER && CONFIG_PREEMPT_TRACER */ | |
| #ifdef CONFIG_NOP_TRACER | |
| int | |
| trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr) | |
| { | |
| /* What could possibly go wrong? */ | |
| return 0; | |
| } | |
| #endif | |
| #ifdef CONFIG_SCHED_TRACER | |
| static int trace_wakeup_test_thread(void *data) | |
| { | |
| /* Make this a RT thread, doesn't need to be too high */ | |
| static const struct sched_param param = { .sched_priority = 5 }; | |
| struct completion *x = data; | |
| sched_setscheduler(current, SCHED_FIFO, ¶m); | |
| /* Make it know we have a new prio */ | |
| complete(x); | |
| /* now go to sleep and let the test wake us up */ | |
| set_current_state(TASK_INTERRUPTIBLE); | |
| schedule(); | |
| complete(x); | |
| /* we are awake, now wait to disappear */ | |
| while (!kthread_should_stop()) { | |
| /* | |
| * This is an RT task, do short sleeps to let | |
| * others run. | |
| */ | |
| msleep(100); | |
| } | |
| return 0; | |
| } | |
| int | |
| trace_selftest_startup_wakeup(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long save_max = tracing_max_latency; | |
| struct task_struct *p; | |
| struct completion isrt; | |
| unsigned long count; | |
| int ret; | |
| init_completion(&isrt); | |
| /* create a high prio thread */ | |
| p = kthread_run(trace_wakeup_test_thread, &isrt, "ftrace-test"); | |
| if (IS_ERR(p)) { | |
| printk(KERN_CONT "Failed to create ftrace wakeup test thread "); | |
| return -1; | |
| } | |
| /* make sure the thread is running at an RT prio */ | |
| wait_for_completion(&isrt); | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| return ret; | |
| } | |
| /* reset the max latency */ | |
| tracing_max_latency = 0; | |
| while (p->on_rq) { | |
| /* | |
| * Sleep to make sure the RT thread is asleep too. | |
| * On virtual machines we can't rely on timings, | |
| * but we want to make sure this test still works. | |
| */ | |
| msleep(100); | |
| } | |
| init_completion(&isrt); | |
| wake_up_process(p); | |
| /* Wait for the task to wake up */ | |
| wait_for_completion(&isrt); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check both trace buffers */ | |
| ret = trace_test_buffer(&tr->trace_buffer, NULL); | |
| printk("ret = %d\n", ret); | |
| if (!ret) | |
| ret = trace_test_buffer(&tr->max_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| tracing_max_latency = save_max; | |
| /* kill the thread */ | |
| kthread_stop(p); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| } | |
| return ret; | |
| } | |
| #endif /* CONFIG_SCHED_TRACER */ | |
| #ifdef CONFIG_CONTEXT_SWITCH_TRACER | |
| int | |
| trace_selftest_startup_sched_switch(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long count; | |
| int ret; | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| return ret; | |
| } | |
| /* Sleep for a 1/10 of a second */ | |
| msleep(100); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check the trace buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| } | |
| return ret; | |
| } | |
| #endif /* CONFIG_CONTEXT_SWITCH_TRACER */ | |
| #ifdef CONFIG_BRANCH_TRACER | |
| int | |
| trace_selftest_startup_branch(struct tracer *trace, struct trace_array *tr) | |
| { | |
| unsigned long count; | |
| int ret; | |
| /* start the tracing */ | |
| ret = tracer_init(trace, tr); | |
| if (ret) { | |
| warn_failed_init_tracer(trace, ret); | |
| return ret; | |
| } | |
| /* Sleep for a 1/10 of a second */ | |
| msleep(100); | |
| /* stop the tracing. */ | |
| tracing_stop(); | |
| /* check the trace buffer */ | |
| ret = trace_test_buffer(&tr->trace_buffer, &count); | |
| trace->reset(tr); | |
| tracing_start(); | |
| if (!ret && !count) { | |
| printk(KERN_CONT ".. no entries found .."); | |
| ret = -1; | |
| } | |
| return ret; | |
| } | |
| #endif /* CONFIG_BRANCH_TRACER */ | |