| # Helper to resolve issues with configs that have SPI enabled but I2C | |
| # modular, meaning we can't build the codec driver in with I2C support. | |
| # We use an ordered list of conditional defaults to pick the appropriate | |
| # setting - SPI can't be modular so that case doesn't need to be covered. | |
| config SND_SOC_I2C_AND_SPI | |
| tristate | |
| default m if I2C=m | |
| default y if I2C=y | |
| default y if SPI_MASTER=y | |
| config SND_SOC_ALL_CODECS | |
| tristate "Build all ASoC CODEC drivers" | |
| select SND_SOC_88PM860X if MFD_88PM860X | |
| select SND_SOC_L3 | |
| select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS | |
| select SND_SOC_AD1836 if SPI_MASTER | |
| select SND_SOC_AD193X if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_AD1980 if SND_SOC_AC97_BUS | |
| select SND_SOC_ADS117X | |
| select SND_SOC_AD73311 if I2C | |
| select SND_SOC_AK4104 if SPI_MASTER | |
| select SND_SOC_AK4535 if I2C | |
| select SND_SOC_AK4642 if I2C | |
| select SND_SOC_AK4671 if I2C | |
| select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC | |
| select SND_SOC_CS42L51 if I2C | |
| select SND_SOC_CS4270 if I2C | |
| select SND_SOC_CX20442 | |
| select SND_SOC_DA7210 if I2C | |
| select SND_SOC_JZ4740_CODEC if SOC_JZ4740 | |
| select SND_SOC_MAX98088 if I2C | |
| select SND_SOC_MAX9877 if I2C | |
| select SND_SOC_PCM3008 | |
| select SND_SOC_SPDIF | |
| select SND_SOC_SSM2602 if I2C | |
| select SND_SOC_STAC9766 if SND_SOC_AC97_BUS | |
| select SND_SOC_TLV320AIC23 if I2C | |
| select SND_SOC_TLV320AIC26 if SPI_MASTER | |
| select SND_SOC_TLV320AIC3X if I2C | |
| select SND_SOC_TPA6130A2 if I2C | |
| select SND_SOC_TLV320DAC33 if I2C | |
| select SND_SOC_TWL4030 if TWL4030_CORE | |
| select SND_SOC_TWL6040 if TWL4030_CORE | |
| select SND_SOC_UDA134X | |
| select SND_SOC_UDA1380 if I2C | |
| select SND_SOC_WL1271BT | |
| select SND_SOC_WL1273 if WL1273_CORE | |
| select SND_SOC_WM2000 if I2C | |
| select SND_SOC_WM8350 if MFD_WM8350 | |
| select SND_SOC_WM8400 if MFD_WM8400 | |
| select SND_SOC_WM8510 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8523 if I2C | |
| select SND_SOC_WM8580 if I2C | |
| select SND_SOC_WM8711 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8727 | |
| select SND_SOC_WM8728 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8731 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8741 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8750 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8753 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8776 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8900 if I2C | |
| select SND_SOC_WM8903 if I2C | |
| select SND_SOC_WM8904 if I2C | |
| select SND_SOC_WM8940 if I2C | |
| select SND_SOC_WM8955 if I2C | |
| select SND_SOC_WM8960 if I2C | |
| select SND_SOC_WM8961 if I2C | |
| select SND_SOC_WM8962 if I2C | |
| select SND_SOC_WM8971 if I2C | |
| select SND_SOC_WM8974 if I2C | |
| select SND_SOC_WM8978 if I2C | |
| select SND_SOC_WM8985 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8988 if SND_SOC_I2C_AND_SPI | |
| select SND_SOC_WM8990 if I2C | |
| select SND_SOC_WM8993 if I2C | |
| select SND_SOC_WM8994 if MFD_WM8994 | |
| select SND_SOC_WM9081 if I2C | |
| select SND_SOC_WM9090 if I2C | |
| select SND_SOC_WM9705 if SND_SOC_AC97_BUS | |
| select SND_SOC_WM9712 if SND_SOC_AC97_BUS | |
| select SND_SOC_WM9713 if SND_SOC_AC97_BUS | |
| help | |
| Normally ASoC codec drivers are only built if a machine driver which | |
| uses them is also built since they are only usable with a machine | |
| driver. Selecting this option will allow these drivers to be built | |
| without an explicit machine driver for test and development purposes. | |
| Support for the bus types used to access the codecs to be built must | |
| be selected separately. | |
| If unsure select "N". | |
| config SND_SOC_88PM860X | |
| tristate | |
| config SND_SOC_WM_HUBS | |
| tristate | |
| default y if SND_SOC_WM8993=y || SND_SOC_WM8994=y | |
| default m if SND_SOC_WM8993=m || SND_SOC_WM8994=m | |
| config SND_SOC_AC97_CODEC | |
| tristate | |
| select SND_AC97_CODEC | |
| config SND_SOC_AD1836 | |
| tristate | |
| config SND_SOC_AD193X | |
| tristate | |
| config SND_SOC_AD1980 | |
| tristate | |
| config SND_SOC_AD73311 | |
| tristate | |
| config SND_SOC_ADS117X | |
| tristate | |
| config SND_SOC_AK4104 | |
| tristate | |
| config SND_SOC_AK4535 | |
| tristate | |
| config SND_SOC_AK4642 | |
| tristate | |
| config SND_SOC_AK4671 | |
| tristate | |
| config SND_SOC_CQ0093VC | |
| tristate | |
| config SND_SOC_CS42L51 | |
| tristate | |
| # Cirrus Logic CS4270 Codec | |
| config SND_SOC_CS4270 | |
| tristate | |
| # Cirrus Logic CS4270 Codec VD = 3.3V Errata | |
| # Select if you are affected by the errata where the part will not function | |
| # if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will | |
| # not select any sample rates that require MCLK to be divided by 1.5. | |
| config SND_SOC_CS4270_VD33_ERRATA | |
| bool | |
| depends on SND_SOC_CS4270 | |
| config SND_SOC_CX20442 | |
| tristate | |
| config SND_SOC_JZ4740_CODEC | |
| tristate | |
| config SND_SOC_L3 | |
| tristate | |
| config SND_SOC_DA7210 | |
| tristate | |
| config SND_SOC_MAX98088 | |
| tristate | |
| config SND_SOC_PCM3008 | |
| tristate | |
| config SND_SOC_SPDIF | |
| tristate | |
| config SND_SOC_SSM2602 | |
| tristate | |
| config SND_SOC_STAC9766 | |
| tristate | |
| config SND_SOC_TLV320AIC23 | |
| tristate | |
| config SND_SOC_TLV320AIC26 | |
| tristate "TI TLV320AIC26 Codec support" if SND_SOC_OF_SIMPLE | |
| depends on SPI | |
| config SND_SOC_TLV320AIC3X | |
| tristate | |
| config SND_SOC_TLV320DAC33 | |
| tristate | |
| config SND_SOC_TWL4030 | |
| select TWL4030_CODEC | |
| tristate | |
| config SND_SOC_TWL6040 | |
| tristate | |
| config SND_SOC_UDA134X | |
| tristate | |
| config SND_SOC_UDA1380 | |
| tristate | |
| config SND_SOC_WL1273 | |
| tristate | |
| config SND_SOC_WL1271BT | |
| tristate "WL1271 Bluetooth Codec support" | |
| default n | |
| config SND_SOC_WM8350 | |
| tristate | |
| config SND_SOC_WM8400 | |
| tristate | |
| config SND_SOC_WM8510 | |
| tristate | |
| config SND_SOC_WM8523 | |
| tristate | |
| config SND_SOC_WM8580 | |
| tristate | |
| config SND_SOC_WM8711 | |
| tristate | |
| config SND_SOC_WM8727 | |
| tristate | |
| config SND_SOC_WM8728 | |
| tristate | |
| config SND_SOC_WM8731 | |
| tristate | |
| config SND_SOC_WM8741 | |
| tristate | |
| config SND_SOC_WM8750 | |
| tristate | |
| config SND_SOC_WM8753 | |
| tristate | |
| config SND_SOC_WM8776 | |
| tristate | |
| config SND_SOC_WM8804 | |
| tristate | |
| config SND_SOC_WM8900 | |
| tristate | |
| config SND_SOC_WM8903 | |
| tristate | |
| config SND_SOC_WM8904 | |
| tristate | |
| config SND_SOC_WM8940 | |
| tristate | |
| config SND_SOC_WM8955 | |
| tristate | |
| config SND_SOC_WM8960 | |
| tristate | |
| config SND_SOC_WM8961 | |
| tristate | |
| config SND_SOC_WM8962 | |
| tristate | |
| config SND_SOC_WM8971 | |
| tristate | |
| config SND_SOC_WM8974 | |
| tristate | |
| config SND_SOC_WM8978 | |
| tristate | |
| config SND_SOC_WM8985 | |
| tristate | |
| config SND_SOC_WM8988 | |
| tristate | |
| config SND_SOC_WM8990 | |
| tristate | |
| config SND_SOC_WM8993 | |
| tristate | |
| config SND_SOC_WM8994 | |
| tristate | |
| config SND_SOC_WM9081 | |
| tristate | |
| config SND_SOC_WM9705 | |
| tristate | |
| config SND_SOC_WM9712 | |
| tristate | |
| config SND_SOC_WM9713 | |
| tristate | |
| # Amp | |
| config SND_SOC_MAX9877 | |
| tristate | |
| config SND_SOC_TPA6130A2 | |
| tristate | |
| config SND_SOC_WM2000 | |
| tristate | |
| config SND_SOC_WM9090 | |
| tristate |