| /* | |
| * Copyright 2013 Maxime Ripard | |
| * | |
| * Maxime Ripard <maxime.ripard@free-electrons.com> | |
| * | |
| * The code contained herein is licensed under the GNU General Public | |
| * License. You may obtain a copy of the GNU General Public License | |
| * Version 2 or later at the following locations: | |
| * | |
| * http://www.opensource.org/licenses/gpl-license.html | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| /include/ "skeleton.dtsi" | |
| / { | |
| interrupt-parent = <&gic>; | |
| aliases { | |
| ethernet0 = &gmac; | |
| serial0 = &uart0; | |
| serial1 = &uart1; | |
| serial2 = &uart2; | |
| serial3 = &uart3; | |
| serial4 = &uart4; | |
| serial5 = &uart5; | |
| serial6 = &uart6; | |
| serial7 = &uart7; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| cpu@0 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0>; | |
| }; | |
| cpu@1 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <1>; | |
| }; | |
| }; | |
| memory { | |
| reg = <0x40000000 0x80000000>; | |
| }; | |
| timer { | |
| compatible = "arm,armv7-timer"; | |
| interrupts = <1 13 0xf08>, | |
| <1 14 0xf08>, | |
| <1 11 0xf08>, | |
| <1 10 0xf08>; | |
| }; | |
| pmu { | |
| compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; | |
| interrupts = <0 120 4>, | |
| <0 121 4>; | |
| }; | |
| clocks { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| osc24M: clk@01c20050 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-osc-clk"; | |
| reg = <0x01c20050 0x4>; | |
| clock-frequency = <24000000>; | |
| clock-output-names = "osc24M"; | |
| }; | |
| osc32k: clk@0 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <32768>; | |
| clock-output-names = "osc32k"; | |
| }; | |
| pll1: clk@01c20000 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-pll1-clk"; | |
| reg = <0x01c20000 0x4>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "pll1"; | |
| }; | |
| pll4: clk@01c20018 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun7i-a20-pll4-clk"; | |
| reg = <0x01c20018 0x4>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "pll4"; | |
| }; | |
| pll5: clk@01c20020 { | |
| #clock-cells = <1>; | |
| compatible = "allwinner,sun4i-a10-pll5-clk"; | |
| reg = <0x01c20020 0x4>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "pll5_ddr", "pll5_other"; | |
| }; | |
| pll6: clk@01c20028 { | |
| #clock-cells = <1>; | |
| compatible = "allwinner,sun4i-a10-pll6-clk"; | |
| reg = <0x01c20028 0x4>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "pll6_sata", "pll6_other", "pll6"; | |
| }; | |
| pll8: clk@01c20040 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun7i-a20-pll4-clk"; | |
| reg = <0x01c20040 0x4>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "pll8"; | |
| }; | |
| cpu: cpu@01c20054 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-cpu-clk"; | |
| reg = <0x01c20054 0x4>; | |
| clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; | |
| clock-output-names = "cpu"; | |
| }; | |
| axi: axi@01c20054 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-axi-clk"; | |
| reg = <0x01c20054 0x4>; | |
| clocks = <&cpu>; | |
| clock-output-names = "axi"; | |
| }; | |
| ahb: ahb@01c20054 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-ahb-clk"; | |
| reg = <0x01c20054 0x4>; | |
| clocks = <&axi>; | |
| clock-output-names = "ahb"; | |
| }; | |
| ahb_gates: clk@01c20060 { | |
| #clock-cells = <1>; | |
| compatible = "allwinner,sun7i-a20-ahb-gates-clk"; | |
| reg = <0x01c20060 0x8>; | |
| clocks = <&ahb>; | |
| clock-output-names = "ahb_usb0", "ahb_ehci0", | |
| "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", | |
| "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", | |
| "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", | |
| "ahb_nand", "ahb_sdram", "ahb_ace", | |
| "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", | |
| "ahb_spi2", "ahb_spi3", "ahb_sata", | |
| "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", | |
| "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", | |
| "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", | |
| "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", | |
| "ahb_de_fe1", "ahb_gmac", "ahb_mp", | |
| "ahb_mali"; | |
| }; | |
| apb0: apb0@01c20054 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-apb0-clk"; | |
| reg = <0x01c20054 0x4>; | |
| clocks = <&ahb>; | |
| clock-output-names = "apb0"; | |
| }; | |
| apb0_gates: clk@01c20068 { | |
| #clock-cells = <1>; | |
| compatible = "allwinner,sun7i-a20-apb0-gates-clk"; | |
| reg = <0x01c20068 0x4>; | |
| clocks = <&apb0>; | |
| clock-output-names = "apb0_codec", "apb0_spdif", | |
| "apb0_ac97", "apb0_iis0", "apb0_iis1", | |
| "apb0_pio", "apb0_ir0", "apb0_ir1", | |
| "apb0_iis2", "apb0_keypad"; | |
| }; | |
| apb1_mux: apb1_mux@01c20058 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-apb1-mux-clk"; | |
| reg = <0x01c20058 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&osc32k>; | |
| clock-output-names = "apb1_mux"; | |
| }; | |
| apb1: apb1@01c20058 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-apb1-clk"; | |
| reg = <0x01c20058 0x4>; | |
| clocks = <&apb1_mux>; | |
| clock-output-names = "apb1"; | |
| }; | |
| apb1_gates: clk@01c2006c { | |
| #clock-cells = <1>; | |
| compatible = "allwinner,sun7i-a20-apb1-gates-clk"; | |
| reg = <0x01c2006c 0x4>; | |
| clocks = <&apb1>; | |
| clock-output-names = "apb1_i2c0", "apb1_i2c1", | |
| "apb1_i2c2", "apb1_i2c3", "apb1_can", | |
| "apb1_scr", "apb1_ps20", "apb1_ps21", | |
| "apb1_i2c4", "apb1_uart0", "apb1_uart1", | |
| "apb1_uart2", "apb1_uart3", "apb1_uart4", | |
| "apb1_uart5", "apb1_uart6", "apb1_uart7"; | |
| }; | |
| nand_clk: clk@01c20080 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20080 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "nand"; | |
| }; | |
| ms_clk: clk@01c20084 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20084 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "ms"; | |
| }; | |
| mmc0_clk: clk@01c20088 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20088 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "mmc0"; | |
| }; | |
| mmc1_clk: clk@01c2008c { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c2008c 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "mmc1"; | |
| }; | |
| mmc2_clk: clk@01c20090 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20090 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "mmc2"; | |
| }; | |
| mmc3_clk: clk@01c20094 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20094 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "mmc3"; | |
| }; | |
| ts_clk: clk@01c20098 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c20098 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "ts"; | |
| }; | |
| ss_clk: clk@01c2009c { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c2009c 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "ss"; | |
| }; | |
| spi0_clk: clk@01c200a0 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200a0 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "spi0"; | |
| }; | |
| spi1_clk: clk@01c200a4 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200a4 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "spi1"; | |
| }; | |
| spi2_clk: clk@01c200a8 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200a8 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "spi2"; | |
| }; | |
| pata_clk: clk@01c200ac { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200ac 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "pata"; | |
| }; | |
| ir0_clk: clk@01c200b0 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200b0 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "ir0"; | |
| }; | |
| ir1_clk: clk@01c200b4 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200b4 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "ir1"; | |
| }; | |
| usb_clk: clk@01c200cc { | |
| #clock-cells = <1>; | |
| #reset-cells = <1>; | |
| compatible = "allwinner,sun4i-a10-usb-clk"; | |
| reg = <0x01c200cc 0x4>; | |
| clocks = <&pll6 1>; | |
| clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; | |
| }; | |
| spi3_clk: clk@01c200d4 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c200d4 0x4>; | |
| clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; | |
| clock-output-names = "spi3"; | |
| }; | |
| mbus_clk: clk@01c2015c { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun4i-a10-mod0-clk"; | |
| reg = <0x01c2015c 0x4>; | |
| clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; | |
| clock-output-names = "mbus"; | |
| }; | |
| /* | |
| * The following two are dummy clocks, placeholders used in the gmac_tx | |
| * clock. The gmac driver will choose one parent depending on the PHY | |
| * interface mode, using clk_set_rate auto-reparenting. | |
| * The actual TX clock rate is not controlled by the gmac_tx clock. | |
| */ | |
| mii_phy_tx_clk: clk@2 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <25000000>; | |
| clock-output-names = "mii_phy_tx"; | |
| }; | |
| gmac_int_tx_clk: clk@3 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <125000000>; | |
| clock-output-names = "gmac_int_tx"; | |
| }; | |
| gmac_tx_clk: clk@01c20164 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun7i-a20-gmac-clk"; | |
| reg = <0x01c20164 0x4>; | |
| clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; | |
| clock-output-names = "gmac_tx"; | |
| }; | |
| /* | |
| * Dummy clock used by output clocks | |
| */ | |
| osc24M_32k: clk@1 { | |
| #clock-cells = <0>; | |
| compatible = "fixed-factor-clock"; | |
| clock-div = <750>; | |
| clock-mult = <1>; | |
| clocks = <&osc24M>; | |
| clock-output-names = "osc24M_32k"; | |
| }; | |
| clk_out_a: clk@01c201f0 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun7i-a20-out-clk"; | |
| reg = <0x01c201f0 0x4>; | |
| clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; | |
| clock-output-names = "clk_out_a"; | |
| }; | |
| clk_out_b: clk@01c201f4 { | |
| #clock-cells = <0>; | |
| compatible = "allwinner,sun7i-a20-out-clk"; | |
| reg = <0x01c201f4 0x4>; | |
| clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; | |
| clock-output-names = "clk_out_b"; | |
| }; | |
| }; | |
| soc@01c00000 { | |
| compatible = "simple-bus"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges; | |
| nmi_intc: interrupt-controller@01c00030 { | |
| compatible = "allwinner,sun7i-a20-sc-nmi"; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| reg = <0x01c00030 0x0c>; | |
| interrupts = <0 0 4>; | |
| }; | |
| spi0: spi@01c05000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c05000 0x1000>; | |
| interrupts = <0 10 4>; | |
| clocks = <&ahb_gates 20>, <&spi0_clk>; | |
| clock-names = "ahb", "mod"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| spi1: spi@01c06000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c06000 0x1000>; | |
| interrupts = <0 11 4>; | |
| clocks = <&ahb_gates 21>, <&spi1_clk>; | |
| clock-names = "ahb", "mod"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| emac: ethernet@01c0b000 { | |
| compatible = "allwinner,sun4i-a10-emac"; | |
| reg = <0x01c0b000 0x1000>; | |
| interrupts = <0 55 4>; | |
| clocks = <&ahb_gates 17>; | |
| status = "disabled"; | |
| }; | |
| mdio@01c0b080 { | |
| compatible = "allwinner,sun4i-a10-mdio"; | |
| reg = <0x01c0b080 0x14>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| mmc0: mmc@01c0f000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c0f000 0x1000>; | |
| clocks = <&ahb_gates 8>, <&mmc0_clk>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <0 32 4>; | |
| status = "disabled"; | |
| }; | |
| mmc1: mmc@01c10000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c10000 0x1000>; | |
| clocks = <&ahb_gates 9>, <&mmc1_clk>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <0 33 4>; | |
| status = "disabled"; | |
| }; | |
| mmc2: mmc@01c11000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c11000 0x1000>; | |
| clocks = <&ahb_gates 10>, <&mmc2_clk>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <0 34 4>; | |
| status = "disabled"; | |
| }; | |
| mmc3: mmc@01c12000 { | |
| compatible = "allwinner,sun5i-a13-mmc"; | |
| reg = <0x01c12000 0x1000>; | |
| clocks = <&ahb_gates 11>, <&mmc3_clk>; | |
| clock-names = "ahb", "mmc"; | |
| interrupts = <0 35 4>; | |
| status = "disabled"; | |
| }; | |
| usbphy: phy@01c13400 { | |
| #phy-cells = <1>; | |
| compatible = "allwinner,sun7i-a20-usb-phy"; | |
| reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; | |
| reg-names = "phy_ctrl", "pmu1", "pmu2"; | |
| clocks = <&usb_clk 8>; | |
| clock-names = "usb_phy"; | |
| resets = <&usb_clk 1>, <&usb_clk 2>; | |
| reset-names = "usb1_reset", "usb2_reset"; | |
| status = "disabled"; | |
| }; | |
| ehci0: usb@01c14000 { | |
| compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; | |
| reg = <0x01c14000 0x100>; | |
| interrupts = <0 39 4>; | |
| clocks = <&ahb_gates 1>; | |
| phys = <&usbphy 1>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| ohci0: usb@01c14400 { | |
| compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; | |
| reg = <0x01c14400 0x100>; | |
| interrupts = <0 64 4>; | |
| clocks = <&usb_clk 6>, <&ahb_gates 2>; | |
| phys = <&usbphy 1>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| spi2: spi@01c17000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c17000 0x1000>; | |
| interrupts = <0 12 4>; | |
| clocks = <&ahb_gates 22>, <&spi2_clk>; | |
| clock-names = "ahb", "mod"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| ahci: sata@01c18000 { | |
| compatible = "allwinner,sun4i-a10-ahci"; | |
| reg = <0x01c18000 0x1000>; | |
| interrupts = <0 56 4>; | |
| clocks = <&pll6 0>, <&ahb_gates 25>; | |
| status = "disabled"; | |
| }; | |
| ehci1: usb@01c1c000 { | |
| compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; | |
| reg = <0x01c1c000 0x100>; | |
| interrupts = <0 40 4>; | |
| clocks = <&ahb_gates 3>; | |
| phys = <&usbphy 2>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| ohci1: usb@01c1c400 { | |
| compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; | |
| reg = <0x01c1c400 0x100>; | |
| interrupts = <0 65 4>; | |
| clocks = <&usb_clk 7>, <&ahb_gates 4>; | |
| phys = <&usbphy 2>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| }; | |
| spi3: spi@01c1f000 { | |
| compatible = "allwinner,sun4i-a10-spi"; | |
| reg = <0x01c1f000 0x1000>; | |
| interrupts = <0 50 4>; | |
| clocks = <&ahb_gates 23>, <&spi3_clk>; | |
| clock-names = "ahb", "mod"; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| pio: pinctrl@01c20800 { | |
| compatible = "allwinner,sun7i-a20-pinctrl"; | |
| reg = <0x01c20800 0x400>; | |
| interrupts = <0 28 4>; | |
| clocks = <&apb0_gates 5>; | |
| gpio-controller; | |
| interrupt-controller; | |
| #interrupt-cells = <2>; | |
| #size-cells = <0>; | |
| #gpio-cells = <3>; | |
| pwm0_pins_a: pwm0@0 { | |
| allwinner,pins = "PB2"; | |
| allwinner,function = "pwm"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| pwm1_pins_a: pwm1@0 { | |
| allwinner,pins = "PI3"; | |
| allwinner,function = "pwm"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| uart0_pins_a: uart0@0 { | |
| allwinner,pins = "PB22", "PB23"; | |
| allwinner,function = "uart0"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| uart2_pins_a: uart2@0 { | |
| allwinner,pins = "PI16", "PI17", "PI18", "PI19"; | |
| allwinner,function = "uart2"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| uart6_pins_a: uart6@0 { | |
| allwinner,pins = "PI12", "PI13"; | |
| allwinner,function = "uart6"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| uart7_pins_a: uart7@0 { | |
| allwinner,pins = "PI20", "PI21"; | |
| allwinner,function = "uart7"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| i2c0_pins_a: i2c0@0 { | |
| allwinner,pins = "PB0", "PB1"; | |
| allwinner,function = "i2c0"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| i2c1_pins_a: i2c1@0 { | |
| allwinner,pins = "PB18", "PB19"; | |
| allwinner,function = "i2c1"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| i2c2_pins_a: i2c2@0 { | |
| allwinner,pins = "PB20", "PB21"; | |
| allwinner,function = "i2c2"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| emac_pins_a: emac0@0 { | |
| allwinner,pins = "PA0", "PA1", "PA2", | |
| "PA3", "PA4", "PA5", "PA6", | |
| "PA7", "PA8", "PA9", "PA10", | |
| "PA11", "PA12", "PA13", "PA14", | |
| "PA15", "PA16"; | |
| allwinner,function = "emac"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| clk_out_a_pins_a: clk_out_a@0 { | |
| allwinner,pins = "PI12"; | |
| allwinner,function = "clk_out_a"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| clk_out_b_pins_a: clk_out_b@0 { | |
| allwinner,pins = "PI13"; | |
| allwinner,function = "clk_out_b"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| gmac_pins_mii_a: gmac_mii@0 { | |
| allwinner,pins = "PA0", "PA1", "PA2", | |
| "PA3", "PA4", "PA5", "PA6", | |
| "PA7", "PA8", "PA9", "PA10", | |
| "PA11", "PA12", "PA13", "PA14", | |
| "PA15", "PA16"; | |
| allwinner,function = "gmac"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| gmac_pins_rgmii_a: gmac_rgmii@0 { | |
| allwinner,pins = "PA0", "PA1", "PA2", | |
| "PA3", "PA4", "PA5", "PA6", | |
| "PA7", "PA8", "PA10", | |
| "PA11", "PA12", "PA13", | |
| "PA15", "PA16"; | |
| allwinner,function = "gmac"; | |
| /* | |
| * data lines in RGMII mode use DDR mode | |
| * and need a higher signal drive strength | |
| */ | |
| allwinner,drive = <3>; | |
| allwinner,pull = <0>; | |
| }; | |
| spi1_pins_a: spi1@0 { | |
| allwinner,pins = "PI16", "PI17", "PI18", "PI19"; | |
| allwinner,function = "spi1"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| spi2_pins_a: spi2@0 { | |
| allwinner,pins = "PC19", "PC20", "PC21", "PC22"; | |
| allwinner,function = "spi2"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| mmc0_pins_a: mmc0@0 { | |
| allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; | |
| allwinner,function = "mmc0"; | |
| allwinner,drive = <2>; | |
| allwinner,pull = <0>; | |
| }; | |
| mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { | |
| allwinner,pins = "PH1"; | |
| allwinner,function = "gpio_in"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <1>; | |
| }; | |
| mmc3_pins_a: mmc3@0 { | |
| allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; | |
| allwinner,function = "mmc3"; | |
| allwinner,drive = <2>; | |
| allwinner,pull = <0>; | |
| }; | |
| ir0_pins_a: ir0@0 { | |
| allwinner,pins = "PB3","PB4"; | |
| allwinner,function = "ir0"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| ir1_pins_a: ir1@0 { | |
| allwinner,pins = "PB22","PB23"; | |
| allwinner,function = "ir1"; | |
| allwinner,drive = <0>; | |
| allwinner,pull = <0>; | |
| }; | |
| }; | |
| timer@01c20c00 { | |
| compatible = "allwinner,sun4i-a10-timer"; | |
| reg = <0x01c20c00 0x90>; | |
| interrupts = <0 22 4>, | |
| <0 23 4>, | |
| <0 24 4>, | |
| <0 25 4>, | |
| <0 67 4>, | |
| <0 68 4>; | |
| clocks = <&osc24M>; | |
| }; | |
| wdt: watchdog@01c20c90 { | |
| compatible = "allwinner,sun4i-a10-wdt"; | |
| reg = <0x01c20c90 0x10>; | |
| }; | |
| rtc: rtc@01c20d00 { | |
| compatible = "allwinner,sun7i-a20-rtc"; | |
| reg = <0x01c20d00 0x20>; | |
| interrupts = <0 24 4>; | |
| }; | |
| pwm: pwm@01c20e00 { | |
| compatible = "allwinner,sun7i-a20-pwm"; | |
| reg = <0x01c20e00 0xc>; | |
| clocks = <&osc24M>; | |
| #pwm-cells = <3>; | |
| status = "disabled"; | |
| }; | |
| ir0: ir@01c21800 { | |
| compatible = "allwinner,sun4i-a10-ir"; | |
| clocks = <&apb0_gates 6>, <&ir0_clk>; | |
| clock-names = "apb", "ir"; | |
| interrupts = <0 5 4>; | |
| reg = <0x01c21800 0x40>; | |
| status = "disabled"; | |
| }; | |
| ir1: ir@01c21c00 { | |
| compatible = "allwinner,sun4i-a10-ir"; | |
| clocks = <&apb0_gates 7>, <&ir1_clk>; | |
| clock-names = "apb", "ir"; | |
| interrupts = <0 6 4>; | |
| reg = <0x01c21c00 0x40>; | |
| status = "disabled"; | |
| }; | |
| sid: eeprom@01c23800 { | |
| compatible = "allwinner,sun7i-a20-sid"; | |
| reg = <0x01c23800 0x200>; | |
| }; | |
| rtp: rtp@01c25000 { | |
| compatible = "allwinner,sun4i-a10-ts"; | |
| reg = <0x01c25000 0x100>; | |
| interrupts = <0 29 4>; | |
| }; | |
| uart0: serial@01c28000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28000 0x400>; | |
| interrupts = <0 1 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 16>; | |
| status = "disabled"; | |
| }; | |
| uart1: serial@01c28400 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28400 0x400>; | |
| interrupts = <0 2 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 17>; | |
| status = "disabled"; | |
| }; | |
| uart2: serial@01c28800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28800 0x400>; | |
| interrupts = <0 3 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 18>; | |
| status = "disabled"; | |
| }; | |
| uart3: serial@01c28c00 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c28c00 0x400>; | |
| interrupts = <0 4 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 19>; | |
| status = "disabled"; | |
| }; | |
| uart4: serial@01c29000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c29000 0x400>; | |
| interrupts = <0 17 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 20>; | |
| status = "disabled"; | |
| }; | |
| uart5: serial@01c29400 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c29400 0x400>; | |
| interrupts = <0 18 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 21>; | |
| status = "disabled"; | |
| }; | |
| uart6: serial@01c29800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c29800 0x400>; | |
| interrupts = <0 19 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 22>; | |
| status = "disabled"; | |
| }; | |
| uart7: serial@01c29c00 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x01c29c00 0x400>; | |
| interrupts = <0 20 4>; | |
| reg-shift = <2>; | |
| reg-io-width = <4>; | |
| clocks = <&apb1_gates 23>; | |
| status = "disabled"; | |
| }; | |
| i2c0: i2c@01c2ac00 { | |
| compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2ac00 0x400>; | |
| interrupts = <0 7 4>; | |
| clocks = <&apb1_gates 0>; | |
| clock-frequency = <100000>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c1: i2c@01c2b000 { | |
| compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2b000 0x400>; | |
| interrupts = <0 8 4>; | |
| clocks = <&apb1_gates 1>; | |
| clock-frequency = <100000>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c2: i2c@01c2b400 { | |
| compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2b400 0x400>; | |
| interrupts = <0 9 4>; | |
| clocks = <&apb1_gates 2>; | |
| clock-frequency = <100000>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c3: i2c@01c2b800 { | |
| compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2b800 0x400>; | |
| interrupts = <0 88 4>; | |
| clocks = <&apb1_gates 3>; | |
| clock-frequency = <100000>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| i2c4: i2c@01c2c000 { | |
| compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; | |
| reg = <0x01c2c000 0x400>; | |
| interrupts = <0 89 4>; | |
| clocks = <&apb1_gates 15>; | |
| clock-frequency = <100000>; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| gmac: ethernet@01c50000 { | |
| compatible = "allwinner,sun7i-a20-gmac"; | |
| reg = <0x01c50000 0x10000>; | |
| interrupts = <0 85 4>; | |
| interrupt-names = "macirq"; | |
| clocks = <&ahb_gates 49>, <&gmac_tx_clk>; | |
| clock-names = "stmmaceth", "allwinner_gmac_tx"; | |
| snps,pbl = <2>; | |
| snps,fixed-burst; | |
| snps,force_sf_dma_mode; | |
| status = "disabled"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| hstimer@01c60000 { | |
| compatible = "allwinner,sun7i-a20-hstimer"; | |
| reg = <0x01c60000 0x1000>; | |
| interrupts = <0 81 4>, | |
| <0 82 4>, | |
| <0 83 4>, | |
| <0 84 4>; | |
| clocks = <&ahb_gates 28>; | |
| }; | |
| gic: interrupt-controller@01c81000 { | |
| compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; | |
| reg = <0x01c81000 0x1000>, | |
| <0x01c82000 0x1000>, | |
| <0x01c84000 0x2000>, | |
| <0x01c86000 0x2000>; | |
| interrupt-controller; | |
| #interrupt-cells = <3>; | |
| interrupts = <1 9 0xf04>; | |
| }; | |
| }; | |
| }; |