| /* | 
 |  * fp_movem.S | 
 |  * | 
 |  * Copyright Roman Zippel, 1997.  All rights reserved. | 
 |  * | 
 |  * Redistribution and use in source and binary forms, with or without | 
 |  * modification, are permitted provided that the following conditions | 
 |  * are met: | 
 |  * 1. Redistributions of source code must retain the above copyright | 
 |  *    notice, and the entire permission notice in its entirety, | 
 |  *    including the disclaimer of warranties. | 
 |  * 2. Redistributions in binary form must reproduce the above copyright | 
 |  *    notice, this list of conditions and the following disclaimer in the | 
 |  *    documentation and/or other materials provided with the distribution. | 
 |  * 3. The name of the author may not be used to endorse or promote | 
 |  *    products derived from this software without specific prior | 
 |  *    written permission. | 
 |  * | 
 |  * ALTERNATIVELY, this product may be distributed under the terms of | 
 |  * the GNU General Public License, in which case the provisions of the GPL are | 
 |  * required INSTEAD OF the above restrictions.  (This clause is | 
 |  * necessary due to a potential bad interaction between the GPL and | 
 |  * the restrictions contained in a BSD-style copyright.) | 
 |  * | 
 |  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | 
 |  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | 
 |  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | 
 |  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, | 
 |  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | 
 |  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | 
 |  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | 
 |  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | 
 |  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | 
 |  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED | 
 |  * OF THE POSSIBILITY OF SUCH DAMAGE. | 
 |  */ | 
 |  | 
 | #include "fp_emu.h" | 
 | #include "fp_decode.h" | 
 |  | 
 | | set flags for decode macros for fmovem | 
 | do_fmovem=1 | 
 |  | 
 | 	.globl	fp_fmovem_fp, fp_fmovem_cr | 
 |  | 
 | | %d1 contains the mask and count of the register list | 
 | | for other register usage see fp_decode.h | 
 |  | 
 | fp_fmovem_fp: | 
 | 	printf	PDECODE,"fmovem.x " | 
 | 	| get register list and count them | 
 | 	btst	#11,%d2 | 
 | 	jne	1f | 
 | 	bfextu	%d2{#24,#8},%d0		| static register list | 
 | 	jra	2f | 
 | 1:	bfextu	%d2{#25,#3},%d0		| dynamic register list | 
 | 	jsr	fp_get_data_reg | 
 | 2:	move.l	%d0,%d1 | 
 | 	swap	%d1 | 
 | 	jra	2f | 
 | 1:	addq.w	#1,%d1			| count the # of registers in | 
 | 2:	lsr.b	#1,%d0			| register list and keep it in %d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 	printf	PDECODE,"#%08x",1,%d1 | 
 | #ifdef FPU_EMU_DEBUG | 
 | 	btst	#12,%d2 | 
 | 	jne	1f | 
 | 	printf	PDECODE,"-"		| decremental move | 
 | 	jra	2f | 
 | 1:	printf	PDECODE,"+"		| incremental move | 
 | 2:	btst	#13,%d2 | 
 | 	jeq	1f | 
 | 	printf	PDECODE,"->"		| fpu -> cpu | 
 | 	jra	2f | 
 | 1:	printf	PDECODE,"<-"		| fpu <- cpu | 
 | 2: | 
 | #endif | 
 |  | 
 | 	| decode address mode | 
 | 	fp_decode_addr_mode | 
 |  | 
 | 	.long	fp_ill, fp_ill | 
 | 	.long	fpr_indirect, fpr_postinc | 
 | 	.long	fpr_predecr, fpr_disp16 | 
 | 	.long	fpr_extmode0, fpr_extmode1 | 
 |  | 
 | 	| addressing mode: address register indirect | 
 | fpr_indirect: | 
 | 	fp_mode_addr_indirect | 
 | 	jra	fpr_do_movem | 
 |  | 
 | 	| addressing mode: address register indirect with postincrement | 
 | fpr_postinc: | 
 | 	fp_mode_addr_indirect_postinc | 
 | 	jra	fpr_do_movem | 
 |  | 
 | fpr_predecr: | 
 | 	fp_mode_addr_indirect_predec | 
 | 	jra	fpr_do_movem | 
 |  | 
 | 	| addressing mode: address register/programm counter indirect | 
 | 	|		   with 16bit displacement | 
 | fpr_disp16: | 
 | 	fp_mode_addr_indirect_disp16 | 
 | 	jra	fpr_do_movem | 
 |  | 
 | fpr_extmode0: | 
 | 	fp_mode_addr_indirect_extmode0 | 
 | 	jra	fpr_do_movem | 
 |  | 
 | fpr_extmode1: | 
 | 	fp_decode_addr_reg | 
 | 	jmp	([0f:w,%pc,%d0*4]) | 
 |  | 
 | 	.align	4 | 
 | 0: | 
 | 	.long	fpr_absolute_short, fpr_absolute_long | 
 | 	.long	fpr_disp16, fpr_extmode0 | 
 | 	.long	fp_ill, fp_ill | 
 | 	.long	fp_ill, fp_ill | 
 |  | 
 | fpr_absolute_short: | 
 | 	fp_mode_abs_short | 
 | 	jra	fpr_do_movem | 
 |  | 
 | fpr_absolute_long: | 
 | 	fp_mode_abs_long | 
 | |	jra	fpr_do_movem | 
 |  | 
 | fpr_do_movem: | 
 | 	swap	%d1			| get fpu register list | 
 | 	lea	(FPD_FPREG,FPDATA),%a1 | 
 | 	moveq	#12,%d0 | 
 | 	btst	#12,%d2 | 
 | 	jne	1f | 
 | 	lea	(-12,%a1,%d0*8),%a1 | 
 | 	neg.l	%d0 | 
 | 1:	btst	#13,%d2 | 
 | 	jne	4f | 
 | 	| move register from memory into fpu | 
 | 	jra	3f | 
 | 1:	printf	PMOVEM,"(%p>%p)",2,%a0,%a1 | 
 | 	getuser.l (%a0)+,%d2,fp_err_ua1,%a0 | 
 | 	lsr.l	#8,%d2 | 
 | 	lsr.l	#7,%d2 | 
 | 	lsr.w	#1,%d2 | 
 | 	move.l	%d2,(%a1)+ | 
 | 	getuser.l (%a0)+,%d2,fp_err_ua1,%a0 | 
 | 	move.l	%d2,(%a1)+ | 
 | 	getuser.l (%a0),%d2,fp_err_ua1,%a0 | 
 | 	move.l	%d2,(%a1) | 
 | 	subq.l	#8,%a0 | 
 | 	subq.l	#8,%a1 | 
 | 	add.l	%d0,%a0 | 
 | 2:	add.l	%d0,%a1 | 
 | 3:	lsl.b	#1,%d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 	jra	5f | 
 | 	| move register from fpu into memory | 
 | 1:	printf	PMOVEM,"(%p>%p)",2,%a1,%a0 | 
 | 	move.l	(%a1)+,%d2 | 
 | 	lsl.w	#1,%d2 | 
 | 	lsl.l	#7,%d2 | 
 | 	lsl.l	#8,%d2 | 
 | 	putuser.l %d2,(%a0)+,fp_err_ua1,%a0 | 
 | 	move.l	(%a1)+,%d2 | 
 | 	putuser.l %d2,(%a0)+,fp_err_ua1,%a0 | 
 | 	move.l	(%a1),%d2 | 
 | 	putuser.l %d2,(%a0),fp_err_ua1,%a0 | 
 | 	subq.l	#8,%a1 | 
 | 	subq.l	#8,%a0 | 
 | 	add.l	%d0,%a0 | 
 | 2:	add.l	%d0,%a1 | 
 | 4:	lsl.b	#1,%d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 5: | 
 | 	printf	PDECODE,"\n" | 
 | #if 0 | 
 | 	lea	(FPD_FPREG,FPDATA),%a0 | 
 | 	printf	PMOVEM,"fp:" | 
 | 	printx	PMOVEM,%a0@(0) | 
 | 	printx	PMOVEM,%a0@(12) | 
 | 	printf	PMOVEM,"\n   " | 
 | 	printx	PMOVEM,%a0@(24) | 
 | 	printx	PMOVEM,%a0@(36) | 
 | 	printf	PMOVEM,"\n   " | 
 | 	printx	PMOVEM,%a0@(48) | 
 | 	printx	PMOVEM,%a0@(60) | 
 | 	printf	PMOVEM,"\n   " | 
 | 	printx	PMOVEM,%a0@(72) | 
 | 	printx	PMOVEM,%a0@(84) | 
 | 	printf	PMOVEM,"\n" | 
 | #endif | 
 | 	jra	fp_end | 
 |  | 
 | | set flags for decode macros for fmovem control register | 
 | do_fmovem=1 | 
 | do_fmovem_cr=1 | 
 |  | 
 | fp_fmovem_cr: | 
 | 	printf	PDECODE,"fmovem.cr " | 
 | 	| get register list and count them | 
 | 	bfextu	%d2{#19,#3},%d0 | 
 | 	move.l	%d0,%d1 | 
 | 	swap	%d1 | 
 | 	jra	2f | 
 | 1:	addq.w	#1,%d1 | 
 | 2:	lsr.l	#1,%d0 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 	printf	PDECODE,"#%08x",1,%d1 | 
 | #ifdef FPU_EMU_DEBUG | 
 | 	btst	#13,%d2 | 
 | 	jeq	1f | 
 | 	printf	PDECODE,"->"		| fpu -> cpu | 
 | 	jra	2f | 
 | 1:	printf	PDECODE,"<-"		| fpu <- cpu | 
 | 2: | 
 | #endif | 
 |  | 
 | 	| decode address mode | 
 | 	fp_decode_addr_mode | 
 |  | 
 | 	.long	fpc_data, fpc_addr | 
 | 	.long	fpc_indirect, fpc_postinc | 
 | 	.long	fpc_predecr, fpc_disp16 | 
 | 	.long	fpc_extmode0, fpc_extmode1 | 
 |  | 
 | fpc_data: | 
 | 	fp_mode_data_direct | 
 | 	move.w	%d0,%d1 | 
 | 	bfffo	%d2{#19,#3},%d0 | 
 | 	sub.w	#19,%d0 | 
 | 	lea	(FPD_FPCR,FPDATA,%d0.w*4),%a1 | 
 | 	btst	#13,%d2 | 
 | 	jne	1f | 
 | 	move.w	%d1,%d0 | 
 | 	jsr	fp_get_data_reg | 
 | 	move.l	%d0,(%a1) | 
 | 	jra	fpc_movem_fin | 
 | 1:	move.l	(%a1),%d0 | 
 | 	jsr	fp_put_data_reg | 
 | 	jra	fpc_movem_fin | 
 |  | 
 | fpc_addr: | 
 | 	fp_decode_addr_reg | 
 | 	printf	PDECODE,"a%d",1,%d0 | 
 | 	btst	#13,%d2 | 
 | 	jne	1f | 
 | 	jsr	fp_get_addr_reg | 
 | 	move.l	%a0,(FPD_FPIAR,FPDATA) | 
 | 	jra	fpc_movem_fin | 
 | 1:	move.l	(FPD_FPIAR,FPDATA),%a0 | 
 | 	jsr	fp_put_addr_reg | 
 | 	jra	fpc_movem_fin | 
 |  | 
 | fpc_indirect: | 
 | 	fp_mode_addr_indirect | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_postinc: | 
 | 	fp_mode_addr_indirect_postinc | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_predecr: | 
 | 	fp_mode_addr_indirect_predec | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_disp16: | 
 | 	fp_mode_addr_indirect_disp16 | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_extmode0: | 
 | 	fp_mode_addr_indirect_extmode0 | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_extmode1: | 
 | 	fp_decode_addr_reg | 
 | 	jmp	([0f:w,%pc,%d0*4]) | 
 |  | 
 | 	.align	4 | 
 | 0: | 
 | 	.long	fpc_absolute_short, fpc_absolute_long | 
 | 	.long	fpc_disp16, fpc_extmode0 | 
 | 	.long	fpc_immediate, fp_ill | 
 | 	.long	fp_ill, fp_ill | 
 |  | 
 | fpc_absolute_short: | 
 | 	fp_mode_abs_short | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_absolute_long: | 
 | 	fp_mode_abs_long | 
 | 	jra	fpc_do_movem | 
 |  | 
 | fpc_immediate: | 
 | 	fp_get_pc %a0 | 
 | 	lea	(%a0,%d1.w*4),%a1 | 
 | 	fp_put_pc %a1 | 
 | 	printf	PDECODE,"#imm" | 
 | |	jra	fpc_do_movem | 
 | #if 0 | 
 | 	swap	%d1 | 
 | 	lsl.l	#5,%d1 | 
 | 	lea	(FPD_FPCR,FPDATA),%a0 | 
 | 	jra	3f | 
 | 1:	move.l	%d0,(%a0) | 
 | 2:	addq.l	#4,%a0 | 
 | 3:	lsl.b	#1,%d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 	jra	fpc_movem_fin | 
 | #endif | 
 |  | 
 | fpc_do_movem: | 
 | 	swap	%d1			| get fpu register list | 
 | 	lsl.l	#5,%d1 | 
 | 	lea	(FPD_FPCR,FPDATA),%a1 | 
 | 1:	btst	#13,%d2 | 
 | 	jne	4f | 
 |  | 
 | 	| move register from memory into fpu | 
 | 	jra	3f | 
 | 1:	printf	PMOVEM,"(%p>%p)",2,%a0,%a1 | 
 | 	getuser.l (%a0)+,%d0,fp_err_ua1,%a0 | 
 | 	move.l	%d0,(%a1) | 
 | 2:	addq.l	#4,%a1 | 
 | 3:	lsl.b	#1,%d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 | 	jra	fpc_movem_fin | 
 |  | 
 | 	| move register from fpu into memory | 
 | 1:	printf	PMOVEM,"(%p>%p)",2,%a1,%a0 | 
 | 	move.l	(%a1),%d0 | 
 | 	putuser.l %d0,(%a0)+,fp_err_ua1,%a0 | 
 | 2:	addq.l	#4,%a1 | 
 | 4:	lsl.b	#1,%d1 | 
 | 	jcs	1b | 
 | 	jne	2b | 
 |  | 
 | fpc_movem_fin: | 
 | 	and.l	#0x0000fff0,(FPD_FPCR,FPDATA) | 
 | 	and.l	#0x0ffffff8,(FPD_FPSR,FPDATA) | 
 | 	move.l	(FPD_FPCR,FPDATA),%d0 | 
 | 	lsr.l	#4,%d0 | 
 | 	moveq	#3,%d1 | 
 | 	and.l	%d0,%d1 | 
 | 	move.w	%d1,(FPD_RND,FPDATA) | 
 | 	lsr.l	#2,%d0 | 
 | 	moveq	#3,%d1 | 
 | 	and.l	%d0,%d1 | 
 | 	move.w	%d1,(FPD_PREC,FPDATA) | 
 | 	printf	PDECODE,"\n" | 
 | #if 0 | 
 | 	printf	PMOVEM,"fpcr : %08x\n",1,FPDATA@(FPD_FPCR) | 
 | 	printf	PMOVEM,"fpsr : %08x\n",1,FPDATA@(FPD_FPSR) | 
 | 	printf	PMOVEM,"fpiar: %08x\n",1,FPDATA@(FPD_FPIAR) | 
 | 	clr.l	%d0 | 
 | 	move.w	(FPD_PREC,FPDATA),%d0 | 
 | 	printf	PMOVEM,"prec : %04x\n",1,%d0 | 
 | 	move.w	(FPD_RND,FPDATA),%d0 | 
 | 	printf	PMOVEM,"rnd  : %04x\n",1,%d0 | 
 | #endif | 
 | 	jra	fp_end |